5$ 2" inch ATV lift Honda 

I gave you a thumbs up because not only did you upload a video that most want to see, you also used words and talked about mechanical leverage in terms that the majority of the people watching this video won’t understand. I understood what you said and I appreciate someone who “gets it” where suspension comes into play.

Old video i know but just installed 1.5 inch spacer on my foreman 500 doing same method. Had to shim out the inside of the pipe abit to fit over my shock but worked perfectly thanks for the video

Hey just a heads up. I love the video and thank you for the info it sounds like you worked on ATVs or have been trained well on this and I'm gonna take your advice and try this out. With that being said, I work with PVC & they do have Schedule 80 PVC which is made for pressurized water in pools, spas, etc. So it will fit just as tight around the shock and just Be thicker and stronger. Also there's something called a " slipped coupling" for when there's NO play or give in a pipe so it doesn't have a stopper in the middle so if you used that it will be even stronger With less joints. Also it's IMPERATIVE That PVC Primer/ cleaner is used this melts the plastic and when glued it's practically 1 piece after that and WAY Stronger than just glue ( for those who didn't know)

Can u do an installation video man

You can even start with an 11/2" pvc pressure coupling they are about a 1/2" longer and if you get a slip coupling they do not have a stop in them so the pipe can be a solid piece.

I've also seen people use hockey pucks, very informative young lad Cheers!!!

Thanks man!! Just got a Honda Recon and planning on putting new bigger tires, so i would just add the spacer to each shock? No additional brackets needed? Thank man 🤙🏼

Can I do this to lift a little to a 2001 kawasaki bayou 220? I'd love to lift it so that I can install bigger tires. Thanks, nice tutorial!

really hope you do a install

Hey Christian. Thanks for the cheap lift tip. Just picked up a new 2016 500 Rubicon (exact same quad - manual shift and all - what I prefer in any machine). Was considering a High Lifter lift kit, but for $100 +, I am going to try your trick first. Only want a slight lift, so, I am going to try a 3/4 inch spacer and see where the bike will sit. Not looking for a super lift as I am only running 26" Slingshot tires, plus, I still would like to have a bit of a softer ride. Thanks again, will let you know how it works out. All the best, and keep up the excellent videos. You are the best promoter for Honda I have see so far. They should be paying you a commission.

great informative video thanks for posting

Just bought a 17 foreman sra and would this work for the back shock as well??

Great video.

What would happen if you put these on a solid rear on a Honda foreman? Mine still has coil overs but would it have a shitting dog appearance since the front is independent

Can I do a lift just to the rear on my 06 rubicon? I want to do it more so to stiffen the rear suspension.

I have a Camso t4s track kit that I put on my 2016 rubicon in the winter for deep snow riding, how would those spacers affect the use of the tracks? Or would I need to take them out when I’ve got the tracks on my rubi? Also, I would like to buy a 35% reduction from you, please get at me for that order...maybe the arched a arms also.

I have a honda 300, I bought new tires and tires are to close to muffler, will this give it enough lift to clear muffler

Yo!!! I'm dizzy AF!

2011 Honda foreman straight axle will it work on it

Will this work on a 2009 foreman straight axel

I'm doing a one-week tour and I got about a hundred and fifty pounds of gear on the back plus me which is 180... so my quad is sitting pretty low can you suggest a total height for making the spacer to help pick up rear, I'm not doing this for a lift purposes but more to stiffen the spring and keep the rear up higher so I don't potentially bottom out and so I don't lose steering ... With the gear on it dropped bout 2.5 inches it I'm going up in 2 weekends so next weekend is the only time I got time to do it

The inside diameter was to small so what do I need to change on my 2009 Honda rancher 420

Can you make a video on how to put the spacers on the shocks

Do you do the same thing to the back socks

How’d it hold up?

Pls make a vid to install this

You been cool if you did I after you got it all done video see what it would look like cuz I'm fixing to do some of these on my Honda Rincon so I can clear 26s or 27s and is it at all I got to do is just put those on top of the springs and it'll lift it I don't have to change anything else should Iaftermarket lift kit so I can get the bolts and hardware out of it to use with the PVC or do I just stick to PVC in there and run when I got factory

Hey I have a Honda rincon 680 and I want to order a steel spacer lift like that but steel and the picture looks very tight on the shock it dosent look loose at all so Gould I get it?

Would this work on a suziki eieger ?

Is it possible to just find a shock that is 1/1/2 inches longer than the shock you have on it to raise it up?.... I have a 86 trx350 so the shock would have to be upgraded anyways

Ok thanks I'll have to try that on my 300

What’s a good meathod like this for a grizzly 660

will this work on a 17 pioneer 700?

Would it work on a 2000 foreman 450es

You rotate that camera 1000 times

Will this work for a 2013 Yamaha grizzly 700

will this work on a 2016 kodiak 700

Would this work on a 06 Honda recon

Will this work for pioneer 700 sxs

Lol the secret is out. i also use the shock extenders from autozone

did you use gas shoks

And so you know how I could be getting water in my oil when I'm in deep water and my crank vent is. Not ran

Rumour has it this guy now designs NASA shuttles.

How do you take the spring off?? You should do a video of that.

My question is would this same setup work on a pioneer500? Not really ready to drop $2800 on long travel arched a-arms.

Would this work on a 05 rancher 400?

Do u need compress the springs at to get strut back together

Can I use it on a 2012 Honda Foreman 450

Will this work on a 97 400 Forman

would this piping fit a honda rancher 350

Will it work on 350 rancher

So do you think it will work on my 2000 350 honda fourtrax rancher that has the swing arm on a single shock

Did it to my 2014 Honda Rincon made a ride like a dump truck but they give you two in

Going to try it on my 02 TRX 350

good video thanks

Ok thx I'll get the pipe tomorrow then and straps

My rear shocks seem to be wore out ...if you sit on the bike it goes down but when you get off you can pull up on the rear rack and it will come back up should I get a set of shocks and springs before I put the obviously spacers on it

What size pvc pipe would I ned to Put a lift on a Kawasaki bayou 250?

Could I also use this for a Yamaha kodiak

How did the PVC lift work out for you? Want to add it to my 2021 rancher. Thanks

Do you know if the 1 1/2” coupling work on rincon shocks?

R.I.P. cv angles

I’m putting a high lifter 2” and one of these 😂 homemade catvos boys 😂😂

How is it holding up with the pvc Cristian Amy

Already have a 2" bracket lift ordered for my 2015 rubicon would this be more efficient? Or could i just do the bracket lift then another inch spacer on the the 2 front shocks to have more of a leveled bike

how big of a spacer do u recommend for a sportsman 850 with no lift kit?

i want to try this

Sorry I'm a little lost , so your not lengthening the shock at all just stiffing up the spring witch reduces sag ?

I’m assuming this would work if I want to do this on the front and back of my 2004 fourtrax AT ? 2 shocks in the front and 1 in back

What about a Kawasaki 360? 08-09

I’ll try it mine needs a lift

Would this work for the front of an 01 350 rancher

Thanks

could you do this if you have a bracket lift?

Your a fan off harbor freight I see

Do you still have this on the bike? 1yr later

hey on a 2016 honda Rubicon do you have to change out the shocks on your ATV to do this kind of lift

Will this work on a 2005 Honda rancher?

Will it work on the back of my 98 Honda 300 rear shock? Plz reply

This should work on a 350d correct??

will this trick work on a solid axle rancher

does this work on polaris 850

WIll this work on a honda 300?

Can you do this on a Honda rancher 350?

Does this work on older models like 96

Can I do this on a 200 type 2 ?

Smart fella

Can u do this lift on a Honda 300 4x4

do you need a shock compressor for it

Yes everyone you can do this on your sra

i did this and it did not fit a 2014 honda foreman rear shock - shock was to wide

Would it work on a Kawasaki prarie 360?

how did you get the spring off

First rate!

It wouldn’t work on a 420 rancher es would it? Cuz of the the straight axle at the back

Mudpuppy could I do this on a rincon 680?

Dammit man I'm dizzy 😂😂

well okay install it and take another video have riding for 1 year and I wanna see the spacer

Anybody ever put a 2 inch instead of the one and a half

smarty pants