5" FPV Drone Build And Flight | Freestyle | DJI O3 

Thank you I appreciate it. 😁

Nice good luck with your build 🤘

Nice 😂

@@andrewmedia3568I mean u said it 3 times in a row 😂

Gotta have that nice BIG TIP!

Yeah sorry.. My controller is the RadioMaster Boxer.

When buying remote controllers for DJI O3? What should one consider? Can I use any controller ?

@@AdarshChandruofficial yes you can use any remote as long as the receiver will connect to it. you can use the dji remote 2 and connect directly to the air unit. or I recommend using ELRS like I am in the video and most people do. the receivers are cheap and easy to buy anywhere. And a wide variety of remotes to choose from. any controller that has ELRS built into it will connect to any drone with an ELRS receiver. doesn't matter what video system your using. the remote and receiver are separate from the O3, unless you are using the dji remote 2. you could use the O3 with ELRS or TBS Crossfire or ghost. you are buying the remote based on what control link you want not based on the O3, again unless you are going to use the O3 as your receiver with the dji remote 2. hope this makes sense.

As long as your radio has elrs and the drone receiver is elrs they will bind and work fine. Just make sure the receiver is 2.4ghz. There is elrs 900mhz but it’s not very common for freestyle quads. A 1400 6s would be fine. Make sure you get 6s motors this build I did was 4s.

Thank you for responding back and for the great video

@@capbabyface2505 no problem happy to help. 👍

Do you have links to the parts?

@@capbabyface2505 I didn't put links to the parts. I have the parts list in the description. I buy almost all my parts from pyrodrone. You should be able to find them there if not race day quads or getfpv will have the parts. And this particular frame was from rotorriot.

Not on this build. This one is strictly a freestyle basher.

Thanks. Sure that sounds great. 😁👍

@@andrewmedia3568 How can I contact you?

@@ruby_tmotor I’ll send you a message on instagram.