5 min Steering Damper Change // Ford Super Duty

Подписаться 11 тыс.

Просмотров 110 тыс.

50% 1

#steeringdamper #bilstein #superduty
Super easy job you can do right at home with the right tools.
Endurance Kennels is the official RU-vid channel of sprint musher Tone Coughlin. Subscribe now to be updated on the latest videos.
For more information on Endurance Kennels LLC, dog sled rides & tours in Duluth, MN, endurance hounds, and eurohounds, how to build dog houses and make ganglines, visit our website at: www.enduranceke...
Get Social With Endurance Kennels:
On Facebook: bit.ly/2QraKJZ
On Instagram: / endurancekennels
On Twitter: / endurancekennel
On RU-vid: / tonecoughlin

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 114

@ojmcbaggins 4 года назад

Your rusty truck makes me feel good about my rusty truck! Thanks again for the info!

@rickbrown03 3 года назад

I was thinking the same.

@danielson2454 3 года назад

99 problems but Rust ain't one.

@nativeoutdoors1780 2 года назад

I don't laugh at RU-vid videos like at all, but the way you said, ooh ribbed for pleasure on her side, caught me absolutely off guard lmao

@ColtonBlumhagen Год назад

I love how we go from hammer hammer hammer on the pickle fork to bam it's in. lol

@endurancekennels Год назад

That's how I roll 😎

@mto_aerial 3 месяца назад

Lol I can’t get mine out for nuthin’ which is why I’m here. I like how you roll! 😎

@nknaakco3966 Месяц назад

@@mto_aerial Here for the same reason, was really hoping for some comment or tip on how to get that sucker out.... crazy frustrating

@mto_aerial Месяц назад

@@nknaakco3966I screwed the nut on just halfway so the puller wouldn’t slip off and used a gear puller and it came right out.

@mitchbrockman4399 4 месяца назад

Why use an impact gun on one bolt and not the other? Should the fasteners be torqued? Thanks.

@endurancekennels 4 месяца назад

Bad angle.

@ricardocorsa9077 2 года назад

Im doing the same thing in my 2012 f250, I can feel a the wobble not really bad, but i want to fix it before it gets worse ,would this really help? Thanks for showing how to get this done great video.

@endurancekennels 2 года назад

The wobble isn't from the steering damper. Could be ball joints and tie rod ends.

@JuanRodriguez-bn8xr Год назад

Did you need an alignment after changing it?

@endurancekennels Год назад

I did not.

@haydendavis2089 Год назад

I know you posted this video a while ago… what kind of pry bar is that to wedge between the bolt? I cant get that out to save my life.

@endurancekennels Год назад

It's a tie rod/ ball joint fork.

@jaburnwo6184 3 месяца назад

Pickle fork

@darrylt1031 2 года назад

you use your impact driver on the bolt with more difficult access, then don't use it on the easy access bolt....what gives?

@endurancekennels 2 года назад

Don't want to melt the nylock

@cliffordduzz4342 Год назад

The beautiful bilstein looks out of place with all the rust but you made my decision on getting one myself on my not that rusted southern 2005 Ford f250 super duty truck

@endurancekennels Год назад

Everything is guaranteed to rust out where we live 😂

@kevinburroughs6583 3 года назад

What size bilstein shock did you use for this replacement? How much better did it make the ride? Does it affect your towing?

@nativeoutdoors1780 2 года назад

He got the 5100 series and it's quite a bit beefier than stock which is really good, I'm about to do the same change on my truck and I'm interested to see if there is any change

@hoosierLowe 2 года назад

@@nativeoutdoors1780 so what was the outcome???? Looking to do the same with my factory shocks on my 2016 Superduty

@nativeoutdoors1780 2 года назад

@@hoosierLowe so I replaced all the shocks with Bilstein and the ride quality definitely improved, then I replaced the front dampener with a 5100 series and I didn't feel any difference which is good, I didn't want heavier steering from the beefier shock.

@nativeoutdoors1780 2 года назад

@@hoosierLowe oh and my truck is an 2008 so the same setup suspension wise and chassis wise as your 2016, so I would think you would enjoy the shocks, apart from looks which I really like, I also just liked the improved peace of mind and ride quality

@jameskulisek1550 4 года назад

Can you post part number or link of damper?

@westtexasdave2140 3 года назад

Were you getting a death wobble before you changed it?

@endurancekennels 3 года назад

@ojmcbaggins 4 года назад

I broke that lower bolt my first time. I'd be interested in finding out what spec its supossed to be torqued down to

@endurancekennels 4 года назад

Ya I hear ya! Call the dealership service department they are always good with torque specs.

@ojmcbaggins 4 года назад

@@endurancekennels they are company specific torque specs. I found the bilstein is 67ft/lb Upper, 26ft/lb Lower. Rancho directions say 35ft/lb on both for their stabilizer. Strange.

@Rob-tx3jl 3 года назад

@@ojmcbaggins different companies different designs different materials, nothing weird about different torque specs.

@theosinitsin3906 11 месяцев назад

@@ojmcbagginsthanks for posting the torque specs!!

@darrylm3627 2 года назад

Good Stuff, Great Tips👍🏿😀

@ALEXELY925 3 года назад

What are the symptoms of needing to replace it? Good video.

@endurancekennels 3 года назад

When the old shock is blown that's when I replace them.

@ricosplace1 2 года назад

If you start getting “bump steer” then time to replace.

@jjsemperfi Год назад

@@ricosplace1 My brand new Bilstein Steering damper bump steers so…

@ricosplace1 Год назад

@@jjsemperfi Sounds like you have some other front end problems. Time to check all your front bushings and ball joints.

@SeaPro360 2 года назад

Step 1, the day you place the order is to spray those bolts/nuts with PB blaster or 50/50 atf acetone mix.

@endurancekennels 2 года назад

Basic knowledge 👍

@waynebarnes1369 Год назад

Looked like that bracket was broken. The very first bolt you took off.

@endurancekennels Год назад

Not broken

@islanderson691 3 года назад

I have a 2017 f450 and as far as I can tell when trying to buy one for my truck they don't make any so it stops at f350 due to the f450 having a wider front end making for tighter turns than the f250 and f350. If you know were I can get one that fits please let me know. Thanks

@endurancekennels 3 года назад

Interesting. Did you try Napa?

@islanderson691 3 года назад

@@endurancekennels yeah, Napa can't even get me locking lug nuts for my truck

@endurancekennels 3 года назад

Ah man that sucks. Have you tried calling a drive line specialty shop? We have one in the neighborhood I bring my truck there for all that stuff.

@islanderson691 3 года назад

@@endurancekennels I have but I'll check a Some specialty shops and see if they can get one.

@OltonBradly 3 года назад

Do you use two of them or one I have 2011 f350 all stock

@endurancekennels 3 года назад

Just one on my truck I could see two if you do tons of off roading.

@haydenpostma9790 4 года назад

Is your truck on jackstands? Or you just doing it while its parked?

@endurancekennels 4 года назад

On the ground lots of clearance if you don't mind lying on your back.

@Boeinguy 3 года назад

WT? You skipped over the removal and right into the new one being there?

@endurancekennels 3 года назад

I'm sure you're smart enough to figure that part out 👍

@josepina4622 3 года назад

did you replace it for any specific reason?

@endurancekennels 3 года назад

The old shock was toast seals puking out it's guts.

@Whyknot80 4 года назад

Is this a Catrina flood rescue truck?

@endurancekennels 4 года назад

WI originally. Lotsa salt and rust there bud!

@Silverxxx450 2 года назад

Did you have wheels turned all the way to the left side?

@endurancekennels 2 года назад

No, straight

@sxsextreme5444 8 месяцев назад

Like how it said 5 minutes and then jump the video to the new damper. Being installed five minutes my ass..

@endurancekennels 8 месяцев назад

Some folks have skillz 👍

@raymondsalinassanchez9639 3 года назад

Did your truck shake alot before replacing?

@endurancekennels 3 года назад

No.

@joeyquinney4032 2 года назад

870-50 had me cracking up lol

@troyingram8167 3 года назад

I have a 2001 f250 super duty and it don't even a steering stabilizer on it

@endurancekennels 3 года назад

Dang!

@ManuelPerez-oz3dn Год назад

Mine didn’t either

@z0sickvett60 3 года назад

What’s the part number on the shock? 5100?

@endurancekennels 3 года назад

I don't recall, sorry 😬

@josepina4622 3 года назад

Do you think that the steering stabilizer could be causing sloppy in my 2015 4x4 F-250?

@endurancekennels 3 года назад

Probably not have you checked your ball joints and tie rods?

@luthoriousOG 3 года назад

Also the steering box itself

@chrisharding2813 7 месяцев назад

3:44 what happened lol, never showed us how you actually got it out. Thats the only reason anyone watched this. Cant just edit it out =C

@endurancekennels 7 месяцев назад

Pickle fork 👌

@LemonySnicket-EUC 4 года назад

But did it make a difference ?

@endurancekennels 4 года назад

Of course.

@h1ghy1eld25 3 года назад

my truck has a ball joint attached to one side

@BD5243 Год назад

What a cop out out cutting the video short to see how long it took for the fork to separate the shock.

@endurancekennels Год назад

Skills are free they don't cost time 😁

@rvadventures 3 года назад

For the love of God put some paint on these trucks if you live in a salty state! Lol

@michaelreis9141 Год назад

Washington the first time he used a ratchet?

@garykost9298 3 месяца назад

Yeah maybe if the bolts are frozen on there it’s a quick job. But they don’t show ya when the shit gets hard.

@endurancekennels 3 месяца назад

If you bring the vehicle inside a heated garage the bolts will thaw out.

@nickgarza4124 3 года назад

"It's ribbed for Pleasure" Get the duck out of here that's hilarious.

@robertbaldeo7313 4 года назад

What year truck is this

@endurancekennels 4 года назад

2008

@BenDover-ut4cj 3 года назад

My 01 F250 doesn make a complete left hand turn, could thi be because the stabilizer is too short ??

@endurancekennels 3 года назад

I don't think so it's probably because the wrong parts were installed.

@BenDover-ut4cj 3 года назад

@@endurancekennels wow thanks for getting back with me. I think the aftermarket stabilizer is too short for my truck therefore making a left hand tight radius turn is impossible. The stabilizer is about 20”-22” long and I think I need at least 24”

@zyre2503 3 года назад

Whats the part number?

@endurancekennels 3 года назад

Dang good question it's not OEM bought it on Amazon.

@Boeinguy 3 года назад

Wtf? You didn’t finish showing the removal?

@Theo8863 7 месяцев назад

Fluid film would stop all that rust.

@endurancekennels 7 месяцев назад

It's Minnesota. We eat rust 👍

@scottwhite2002 Год назад

Don’t tell us the torque specs or anything

@endurancekennels Год назад

Tight 👍

@m.7n6 7 месяцев назад

5 minute job my ass, I can't even get a two year old rough country steering stabilizer out of a two year old not so rusty drag link

@endurancekennels 7 месяцев назад

I got skillz my friend. Skillz. 😎

@ThemGnarlyBoys 2 года назад

5 minute? Not when you can’t get the old ball joint bolt out

@endurancekennels 2 года назад

Bummer

@SilverbackSasquatch19xx 3 года назад

Way to skip prying the second side out

@endurancekennels 3 года назад

Kyler did your parents give you that name?

@SilverbackSasquatch19xx 3 года назад

@@endurancekennels Unsure of how your question pertains to your video but the answer is yes.

@luthoriousOG 3 года назад

Soooo many weird questions.

@rolandogarcia3597 4 года назад

Sure take of the damper and f... the rest of the bushings lol

@endurancekennels 4 года назад

😬

@dickfitswell3437 4 года назад

What size socket

@endurancekennels 4 года назад

Can't remember 17 or 18mm

@dickfitswell3437 3 года назад

@@endurancekennels Thanks. I was able to change mine out in the parking lot at Holiday Inn Pine Bluff Arkansas. The 🥒 fork is a must have. Well that or a arm that kicks like a horse. No way could I get mine with out that picklefork