5 Must Have Mods 5x10 Carry On, Lowes, Tractor Supply Utility Trailer- Best Single 2000lbs Axle 

Your additional male mounts for the tongue jack, is very clever! As with most inventions, it seems obvious in retrospect, but I've never seen this before. I'm going to do this to both of my trailers! Great idea!!

I have owned utility trailers most of life, and I never thought about modifying them to accommodate the tongue jack for easy tire change. I am blown away by that my friend, Great job!!

Love the jack in the back. Do one on each side and pull your wheels off the ground when in storage. Love it!!!

Great tip on mounting the jack tubes on the rear! I put backup lights on our utility trailer and boat trailer, helps ALOT! Not only at night, also when backing up in parking lots, this way other folks know exactly what your doing.

Great tips. Hint: cross those chains in an X when hooking them up

Great video and mods. When my original cheap trailer tires needed replaced, I took it to a tire store and got actual steel radial trailer tires. Huge difference!

Nice the pipe to jack up the tires. I like and respect that. Been assembling trailers for 16 years and making my own for 8 years and I absolutely respect this modification, it should be industry standard. Much respect Sir.

Stumbled across your video while researching e-track for my 6 X 12 dual axle. That Pro Plug is EXACTLY what I was trying to put together in my mind as an alternative to having the wiring harness exposed 24/7 for quite some time. I have flexible split loom on mine but you have to pay attention to it as it does degrade over time, especially here in south Florida with our super-duper sun. Don't have to create something that has already been created ...... just ordered one. Only negative ...... they are closed for the entire month of December! But, not a big deal, been this long without it another month isn't going to make any difference. Nice video, thanks.

That jack setup is a real good idea!

Not gonna lie I’m stealing more than one of these ideas. My trailer is close to 70 years old and the frame rails rotted out (old boat trailer) I think the only thing original on it now is the tongue. Love that pro plug and everything else about this build. Great job.

The jacking points at the rear can also be used with 2 more Jacks to stabilize the trailer when loading and unloading.

Paul between me and the misses we've got 11 trailers and I'm shopping for number twelve today . I thought I knew trailers. After watching you though, I tip my hat to you sir. I Really enjoyed your share , and thank you for it!

As a young widow with kids flat tires are one of my biggest pain in the butt issues/worries. Next thing I'm learning to do is weld and Im going to weld that jack stand attachment thingy on! Thanks for sharing it. GENIUS!!!

Great mods Paul. Really like the tube for the jack to change the tire. If you put a jack on both sides you could load the trailer without being hooked to the truck

Nice work sir. I did similar mods. One additional one i did to mine was to replace the tongue with a 72 inch length tongue and then installed a 2 inch ball set up

Paul, thank you, for the great ideas. I like your modifications for jacking up the trailer to change the tires. Fantastic idea thinking outside of the box there!

Hell of a job. Really nice mods. I’ll be adding some of these to my trailer. Just watch the dewalt tool box, they get brittle with age.

There is a lot of thought gone into this. I love the jack, the detachable cable & the tail assist...gonna do all three on my trailer in the spring when I revamp it.

that jack setup is smart. One thing I did on a work trailer was weld a axle spindle where my spare was than I carried a spare hub bearings and spare.

Great idea on the jack to change your tires. I'm definitely doing that to my trailer 👍🏻👍🏻

I really like some of your modifications. Especially the ramp assist and beefing the ramp up. They are all to flimsy when you buy the trailer. Love the wiring setup on the front of the trailer. I need to watch again and see what you did there. The rear Jack is also a great idea. I’ve thought of that because when I lower the ramp on mine and get up in the trailer it lifts the front off the ground. Thanks for the video. Nice ideas.

love the pro plug ..very nice add

First off I personally wouldn't buy a box store trailer but, you have added some really smart ideas to it that's definitely a winner. Building mine from scratch as at the scrap yard the steel angle and tube was still way cheaper and stronger.. The axle with leaf springs, fenders and good tires/ rims were free, got lucky. Your add on's are fantastic as your perspective gave me great things to add in that left me with forward direction rather than saying later, "Damn That's such a good idea I need to go add that", it will be on it right out the gate Thank You.

Really good useful mods,, really like the tounge jack mounts for changing tires

Clever and to the point. Especially like the rear jack mounts and the license plate extra anchor. Have lost one or two myself.

Every mod is spot on. I guess you could go on and on with the mods, but these all are terrific without spending a whole lot of money. One more important mod might be removable stake sides. Another simple thing to go with your jacks would be level indicators

Love the Tongue jack. Nice. For replace tire make it so easy. Wow.

Nice mods. Another mod I'd recommend if the trailer doesn't already have them, are greasable wheel hubs.Hubs with external grease fittings will save you tons of time and effort greasing wheel hubs. And believe me, don't overlook the hub bearings.If the bearings are dry, they will eventually fail.

That was a DOPE video! I have a trailer just like that! (Mine might be a bit longer) But same idea... I’m definitely going to ad all them mods to my trailer first chance I get! Those are all really good ideas man! Great video to buddy! Keep at it! I will definitely be watching the videos on the leaf spring replacement! Thanks again “BIG D”

Awesome mods! No favorites, I like them all. Great video.

Nice job Paul, some really good tips. Thanks for sharing

I am building a trailer. I love the rear jack points.

Great tips, definitely doing the Jacks and plate mods! Thanks!

Nice modifications. Makes the trailer that much more useable. Also, the late model rear bumper swap on the pick up looks sharp.

Very well done Paul! Not just pro tips but pro design and fab.

Awesome upgrades.I like to get the longer chain links and weld them along the bottom of the trailer where the vertical angle bar and edge of trailer connect.They make great tie down points and add strength.

Thank you! We are going to build a square drop camper/gear trailer and are going to start with a new 5x8 trailer. Definitely going to reinforce the tongue and I'm going to check out that pro plug system! Being in maine, it would be nice to have that on our trailers to keep everything clean!

Nice mods! Think I’ll invest in the lift gate assist. Didn’t think I’d worry much about it before, but it’s getting heavier with age,..my age that is! Lol. Thanks for the ideas.

Nice mods, I really like the jack mounts on the back.

Great job... Both on the trailer & the video..! 🎉

Great idea's on everything, thanks Paul !

Awesome ideas! Thanks for the video. Keep them coming.

Wow! Never heard of a Pro Plug! Thanks!!

There's some great tips. I've always had tongue jacks, but a great idea to use to jack the trailer

Love the tailgate assist. I purchased a used trailer and swapped out the boards due to half being broken with 2x6 ones. Nice and thick. You did not mention trailer hooks. I’m not sure I saw any on yours? I added a total of 4, may add two more in very front. Purchased the large ones from Harbor Freight at $4 a piece and 3/8 screws/locks/ bolts from Home Depot. Those hooks were a must have for me. Very easy and fast to drill through the metal frame. Thanks for the video. I will be looking for the tailgate assist now.

Nice. Good tips for a first timer. I have all these...after years of encountering a reason to do. :) much appreciate the vid

Those are some nice mods Paul, looks like you’re an excellent welder too buddy.👍🏼☮️

Thanks Paul! Good stuff buddy! Gonna get a Pro Plug for sure!

These are great mods and smart ones too, thank you, great video. I plan on buying my trailer soon so this really helped.

Love the video,nice mods I will be making some mods to my trailer. Thank you for sharing your video. May God bless

Sick trailer man! 👌

I really like the jack used for changing a tire. Great idea and really worth while.

Awesome mods. Thank you

Nice work. Hope to see more like this

paul , i love that jack idea ! im doing it this weekend lol

Congratulations, you made it into my recommended videos. Nice video, it had that kind of flow that makes the subject interesting. I especially liked the one shot style.

I do the light boxes on every trailer. About $45 on amazon for the pair with lights.

Nice mods, thanks for the ideas

The Jack mount at the rear was a great idea.

Great tips. Really like all. Thanks.

Great video I have to purchase a small trailier to haul my second 4 wheeler around and I'm definitely gonna use some of your ideas

All great tips. Thank you!

Great video! I imagine the rear jacking points come in very handy if you already have a load on the trailer. Also If you're parked.

Nice mods.... gave me some great ideas!

I have the Lowe's 6x10-ft Utility Trailer with Wire Mesh all the way around and the Ramp Gate. I noticed that your mesh is welded from the top when down which I wish I had. I was carrying something up the ramp when the mesh gave way under me. If it were on top like yours, it probably would not have broken. Now I have to wield angle iron around the outside over the mesh because I don’t trust wielding the mesh. Also I found that I don’t really have much to tie off to and have broken the mesh on the sides as well so I want to wield tabs around the sides to attach hooks to. My trailer already had the jack in front, but I bent it after forgetting to jack it all the way up. I thought about buying a fold up jack to replace it, but was worried about drilling into the A-frame because it had all the wiring run through it. I also lost my license plate because it had a plastic mount. I sometimes load it without being connected to the truck and the rear goes down to hit the ground and I’m thinking of welding a jack or something on the back to prevent that from happening. I’m tired of looking for large rocks and such to put under it because my jack stands are too tall. I don’t have a spare tire and I really like how you have yours set up so that you can easily lift the trailer.

Great tips and thanks for sharing them

Thanks for the ideas. Nice setup.

If I could make a suggestion. My trailer has a 2" square tube at the front of the deck. It is 18" off the deck. I carry two spare tires that ride on axle stubs and spindles. By carrying them this way it also gives two sets of bearing ready to be swapped to the trailer axle. It works well. I have had a bearing go out and had to change bears on the road. The bearings on the spare tire racks are pre-lubed and ready to install. Before this I had carried spare bearing and a tube of grease in the tool box. 50 years of towing various trailers this is by far the best way to carry backup bearing. Just thought you would like the suggestion. Great video.

Love it! Great job!

Nice video, liked, subscribed, and commented. You're almost to 400 subs now!

Good job my friend, you have very good ideas!

Nicely done!

Suggestion: Mount plate under gate with an LED plate light.

Good video. Short and sweet. If I were you, the next improvement would be a coat of rustoleum. Lol

Like the mods you made.

Nice setup bud , nice setup 👍

Great tips! Good work!

There are aftermarket valve stems available that you can have your local tire sales department add to your rims. Some newer vehicles ( I drive a 2019 Chevy Silverado) have the option to read these “Bluetooth” valve stems air pressure and ALSO temperatures which will show a possible axle bearing ready to overheat.

Neat jack idea

Nice. You rock on the mods.

Great Video! Thanks for sharing. I just bought a 6'x10' foot trailer and looking for ideas to upgrade it.

Great mods indeed + I'll add few ... 1. UNDERCOAT trailer frame, steel or aluminum with some oil undercoating only (Fluid Film and such), take care of rusted frame above deck as well. 2. Weather proof (Thomson sealer) top and bottom of wood deck and do it as often as necessary. These two things are the MOST important ones you'll ever do to extend trailer life. 3. Install telescopic stands in the back of trailer, work great for loading/unloading heavier loads + when storing, you can lift the trailer off the ground.

Nice trailer! 👍🏽

Well done. Thanks for sharing.

Great tips thank you so much for posting

You did a great job on the trailer. The only suggestion I have is to add reflective tape on the ramp and around the trailer for added safety.

I love squared away trailers. Nice set up. Jack stand is ideal for replacing a tire.

Great information, thank you.

The jack stands are a great idea.

Great ideas great video. Thanks

Awesome im going to follow all of your ideas thanks

I just bought one , thnx for the post.

Great mods thanks!

Thank you - great video and very helpful.

I like the tire jack and the pro plug.

Great video man and great idea! I’m gonna do this to my trailer and spare tire on a spindle! Extra bearing too!!! Another guy commented with the spindle idea. Didn’t want to take credit for someone else’s idea! Super Kool!

Got one other tip for ya, instead of using those 2 x6 boards on the floor of your trailer. Go buy some 3/4” or 1” waterproof plywood and you can get the plywood covered with plastic laminate on both side of the plywood too. If you use 3/4” thick plywood, I doubled it up on my floor of my trailer making it a 1 1/2” thick. Since my trailer was a 5 x12 trailer I put a 12” seam on the plywood floor on the left side with the first piece of 3/4” plywood then put the seam on the right side for the second layer of 3/4” plywood. It will never crack, warp, twist, and will outlast any of those 2x6 or 2x8 etc for decades! Put this on the floor of my trailer over 10 years ago and still looks like new for the most part other then some scratches on the laminate where I’ve used a shovel to get out dirt, gravel and bark dust. Which with the laminate on the floor it makes sliding a shovel across the floor slick as can be having nothing to hang up on like splintered wood on those 2x6 boards and no spaces between boards also means no materials like dirt can fall thru the cracks since it’s a solid floor with the plywood and I guarantee the plywood will hold way more weight then those 2x6 will too! Even if the waterproof plywood cost more? The fact that it outlast the 2x6 by literally decades and you won’t need to have to spend the time and expense of replacing the 2x6 boards. Over time you’ll find even paying more for the plywood still will be cheaper over time to use as a trailer floor. Just amazes me that more people haven’t figured out that plywood and even CDX plywood better then those 2x6 boards for so many different reasons. Having plywood got those several layers all glued together and each layer has the grain running the opposite way that makes more strength as well as more stable material than any solid board ever will be! Back when I was a poor boy and couldn’t afford waterproof materials like I used now. I just used regular fir plywood on my trailer floor and put a sealer on it. That floor lasted over 15 years before I ever had to replace it and the trailer sat out in the weather year round too! You will never be disappointed if when you need to replace those 2x6 boards and you change to a good plywood floor you’ll never go back to using solid wood boards again I promise you!

great video love the upgrades, iv got one more for you that a trailer dealer suggested to do Take some Thompsons water seal to the planks it not only keeps them from soaking in water and making your trailer heavier but it keeps them in good shape. even if you have old planks it cant hurt

Live the jack idea

Looking good i like it you have good ideas thanks