No video :(

5 Woodworking Tools You Didn't Know You Needed, Until Now - Vol 7

Подписаться 625 тыс.

Просмотров 150 тыс.

50% 1

These are 5 AMAZING woodworking tools you will love to have in the shop!
Save 20% on your system and your first month is free when you sign up for interactive monitoring. Visit SimpliSafe.com/731woodworks to learn more!
Videos To Watch Next
5 Tools Under $30 You Need! - • 5 Tools Under $30 Ever...
5 Tools You Didn't Know You Needed Vol 1 - • 5 Woodworking Tools Yo...
BUILD PLANS - www.731woodworks.com/store
Greatest Free Gift - story4.us/731Woodworks
Amazon and other affiliate links are used in this description to help support my channel.
Tools in Video
Kreg Project Blocks - amzn.to/37SmyQ9
Carter FAST Set-Up Blocks - amzn.to/3khAgyT
Woodpeckers Squares - bit.ly/3vRC3ji
Woodpeckers Aluminum Square - amzn.to/3LofjxT
Incra V27 Miter Gauge (Amazon): amzn.to/38AgUCw
Incra V27 Miter Gauge (YellowHammer) - lddy.no/15zpb
Micro Jig Push Block - amzn.to/3Kh8DR3
Save 10% ON MICROJIG
If you purchase the MicroJig products at TayTools lddy.no/15zpc use code 731MICROJIG10 to save 10%. on all MicroJig Products.
Other Products in Video
Pica Pencil - amzn.to/3rVFfJN
Woodpeckers Other Tools - amzn.to/38AhlwE
MicroJig Gr-Ripper - amzn.to/38vE3pk
The Shirt I Wore - www.kerusso.com/products/keru...
Work Boots - tidd.ly/3rvnmkA
You can support me on Patreon and get cool and unique perks! / 731woodworks
Support us and our channel by shopping our affiliate partners for tools and supplies:
Yellow Hammer Tools: lddy.no/142ay
Acme Tool Deals: imp.i284638.net/P0nmre
Pocket Hole Jigs I Recommend: masscaproducts.com?aff=3
Starbond CA Glues I Use: social.731wood.works/AvqZYS_L
Dust Masks I Use: tidd.ly/2ZjqqoD
Join this channels membership to get access to exclusive member-only live streams, discounts, and other perks:
/ @731woodworks
I get my stickers from Sticker Mule. Get $10 credit on your sticker order using this link - www.stickermule.com/unlock?re...
This video was sponsored by SimpliSafe
0:00 Woodworking Tools You Need
0:15 Kreg Project Blocks
2:15 Carter FAST Alignment Tools
4:56 SimpliSafe Ad
6:25 Woodpeckers Squares
10:10 Incra V27 Miter Gauge
13:35 MicroJig Smart PushBlock

Опубликовано:

8 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 157

@731Woodworks 2 года назад

Save 20% on your system and your first month is free when you sign up for interactive monitoring. Visit SimpliSafe.com/731woodworks to learn more!

@RL-521 2 года назад

Excellent content! Woodpecker seems to be a great product, just can't get onboard with the Louis Vuitton pricing.

@tinvy8291 2 года назад

Just going to use a cnc and make one lol might be cheaper

@briancarroll6803 Год назад

Especially when you can spend just a few minutes truing your framing square for free.

@CHIPSpeaking 4 месяца назад

I cannot help but agree. I am safe from their pricing plan, since I cannot buy them without a 6 to 12 months financing plan!

@gioazzarello1333 2 года назад

I know they don’t get as much views as the tool videos but I enjoy the build videos so much more and that’s the reason I originally subscribed I hope to see more! Hope you and your family are doin well!

@theguitarpicker 2 года назад

Quick tip: those toppers for the bench cookies, dip the tip in that dip can you used for the tool handles and hammer, it won't dent anymore and it grips better that the plain plastic.

@3rdOrderFX 2 года назад

Found your channel a couple weeks ago, then realized you're local to me, haven't stopped watching since. Appreciate the story- the work- and the videos.

@731Woodworks 2 года назад

Awesome, thank you!

@cullenbohannon7099 2 года назад

Tip for the setup blocks. Put another one on top turn it over the blade/router bit to use for exact height without having to use your fingers

@Royalblue73 2 года назад

Another great video Matt. Thank you for sharing your wisdom with us. 👊

@ronswoodshack3855 2 года назад

Really cool tools!! Thanks Matt!!

@schoppworld 2 года назад

Love the shirt!

@kirkberryleo3307 Год назад

Awesome video thanks

@dennisbeaver5958 Год назад

Another great review clip!

@johnmclain6535 2 года назад

Got that mitre gauge today. Pretty square outtathe box and no play in the slot after adjustment. I dig this!

@Fluffywings84 2 года назад

Great video. No need for the music. You are the entertainment!

@Anschutz270 2 года назад

Great video. I'll have to keep my eye out for that miter gauge. The delta one is a little wanting as well.

@johnmclain6535 2 года назад

Just bought that mitre. Thanks buddy!

@spacedragon7604 2 года назад

I didn’t realize the incra was so affordable. I literally went and bought one after watching this. Appreciate the info!

@guybowers9094 2 года назад

I love my gripper and now after seeing their pushblocks I will for sure get me a set of those, great product. Like your I'm very cautious of the bandsaw which I think is the scariest tool in the shop

@LYTOMIZE_Woodshop 2 года назад

Dang! I'm ordering the project blocks and the push block NOW!

@lawrencelunsford6028 2 года назад

I have the Incra 1000SE miter gauge and I love it. I’m sure the V27 would be a great (and cheaper) addition to the table saw.

@fredbrooks1386 2 года назад

Great video. You convinced me to buy the woodpecker squares. I taught shop, industrial arts, technical education, CTE …… whatever you call it for 41 wonderful years (most of the time) One thing that bugs me is the term “unloosen “ for loosen. Unloosen means to tighten. As I told my students “words have meaning” I guess if this is the only things that bugs me I am pretty lucky.😵‍💫😀

@billboy7390 2 года назад

The micro jig smart pushblock are great and even when using the pad without the tabs it is by far the grimiest I’ve ever used.

@michaeldowdy8444 2 года назад

Love your videos Matt. Keep up the great work!

@HW-75 2 года назад

Thanks for the tip on how to see if the square is true or not. I just check mine and it is a tiny tad off.

@dinkyshopYT 2 года назад

Excellent video. Helpful.

@kumosworkshop 2 года назад

Awesome video, brother. Love the shirt, by the way. I recently made a hoodie with that same verse, but a different style. God bless. 🤙🏽

@greatgrandpaswoodworking 2 года назад

As luck would have it I was looking for a new miter gauge for my table saw. She just ordered it for me. Followed your Amazon link and it was 69.95. A great deal. Thanks.

@731Woodworks 2 года назад

Great deal! You'll like it!

@TailEndCustoms 2 года назад

Looks like you could throw one on the side of the table saw blade then take another and magnet it on top over the blade so you can come up with the blade till it touches the over top block then your set for the side block sizes instead of guessing with your finger like that. 👍🏼

@tomhuggard1510 Год назад

Love your videos brotha 💪

@731Woodworks Год назад

I appreciate that

@Teh-Stig Год назад

Probably worth pounting out the Woodpecker also have a millimetre version for the more evolved woodworker.

@naturaIIydifferent 2 года назад

I never understood buying push blocks... Especially when you have a bandsaw... Very easy to make and you can add whatever features you could ever want! I've never used a store bought push block and I don't ever plan on it lol. Those set up blocks would be useful though for setting up a router table to build cabinets with the 1/4,1/4,1/4 trick. Once you build a box with locking rabbets, pocket holes seem slow.

@cedaroakfarm8596 2 года назад

absolutely like Woodpeckers!!

@bernkondret9981 2 года назад

The bandsaw fence should be aligned to the miter slot. Then adjust the blade tracking until it cuts straight. Very easy. Then your fence and miter gauge and blade are correct for all cuts.

@bobhenry8262 2 года назад

Would be nice to see at least one build video for every 50 of these.

@731Woodworks 2 года назад

I did a desk build and a router stand build 2 weeks ago but barely anyone watched.... You may have missed them too 🤷‍♂️. That's why there are less of those and more of these. Folks don't watch the builds as much. I still do them and like doing them but also have to make videos the majority of people actually want to watch.

@JustinArrington 2 года назад

The numbers on the side are brilliant

@thomasgilbert9347 2 года назад

Thanks for the video. I have been watching the whole series.

@731Woodworks 2 года назад

Thank you

@rockingirish 9 месяцев назад

Bought the Incra V27 from Amazon. They just chucked it in a box with no padding. Plastic had fallen off etc. so delicate tools try a good source.

@spudseq 2 года назад

Great Vid - Subbed

@731Woodworks 2 года назад

Thanks for the sub!

@FredD63 2 года назад

I like your Rikon bandsaw I’m looking to replace my Kalamazoo industrial saw that is decades old and hard to find parts for

@AxGryndr 2 года назад

There is a problem with checking accuracy of a square using the edge of your workbench which is the assumption that the edge is straight along the entire section you referenced off of. If you need a really precise square, then a good quality one will come with a certification (I don't know if the Woodpecker's do but most machinist square do). What I have found with some of the big carpenter squares is the inside edge will be square but not the outside.

@russmartin4189 2 года назад

Whoa! Nice bandsaw. First time I saw it.

@BissellMapleFarm 2 года назад

I appreciate that shirt. I love me some periodic table references.

@grumpywiseguy5992 2 года назад

Tremendous! You get better and better at these videos the more you do. I like these as much as your project videos. You have your own opinions which are not swayed by the manufacturers. Thanks a bunch!!

@731Woodworks 2 года назад

Thank you!

@danjacobsen7645 Год назад

Can the incra mitre gauge be incorporated into a table saw sled? I recently built your safer sled with a 3/4” base. Thank you!

@Aztecs911 2 года назад

This question about the two different squares being square or not. The deal with the carpenter square being a little off is that the LONG section butting up against the wood side is catching more wood surface that may/is not perfectly square itself thus throwing off the line you draw. The smaller woodpecker is not catching as much surface it's butting up to thus will not project more on the line you draw. Two lines drawn that are very little off where they start will separate more as the line moves away from the start. Geometry stuff. The woodpecker is still cool.

@keningilbert 2 года назад

This video needs to be added to the "Must Have Tools Every Woodworker Needs" playlist

@erickdanielsson6710 2 года назад

You can fix the framing square. At the angle use a hammer and dimple punch. If the square is showing less then 90 degrees, dimple the inside corner to about half way. This expands the metal outward till you are at 90 degrees. If the square is more than 90 degrees. Use punch starting at the Outer point working towards the inner bend. This causes the arm to move inward. Hard to explain, easy to do.

@curbshooter 2 года назад

I miss your builds

@731Woodworks 2 года назад

Thanks. I still do them at about 1 or 2 per month. The reasons there are fewer is because they are hardly watched compared to the tool videos.

@derRoteKampfflieger Год назад

Just a tip. If you are using the framing square to scribe a line you use the inside edge not the outside. That test was doomed from the start.

@Swamp-Fox 2 года назад

You are gonna make me spend money!

@barretthamilton2565 2 года назад

On the Incra Gauge, you say fit almost any miter slot. Mine is 5/8, will it work for that? I do enjoy the Incra stuff (not as much as they enjoy charging an arm and a leg) but it is GOOD.

@essexbarnworkshop8578 2 года назад

Great video, the kreg project block link is going to an evolution mitre saw?

@731Woodworks 2 года назад

I'll check it. thanks

@Greatgadgetsgear 2 года назад

Isn’t the table saw plate lower than the table? Won’t that affect the height when using the blocks on the plate vs the table?

@JohnSmith-tk9db 2 года назад

I don’t own a sawstop so this is a maybe: on the side of the miter gauge it looked like there are small adjustment screws to eliminate the wobble in the miter slot.

@FredJones-ej9jx Год назад

You can get machinist squares that are cheaper and guaranteed to be more accurate. Woodpecker says within .001 per foot, Taylor Toolwork says 0.00043 accuracy

@CHIPSpeaking 4 месяца назад

Of course their price at that accuracy level is gonna be exponentially higher, no doubt!

@andrewbrimmer1797 Год назад

Worked in a high end cabinet shop we just used boards with nails lol

@williamhnatko1958 2 года назад

you said you'd put the magnets on the bottom because of vibrations, you could put them up above like you had before if you put a large magnet behind the blade cover as a magnet enhancer, might be nicer having them at eye level!

@matthewandrasi3026 2 года назад

Want a cheap alternative to setup blocks that you probably already have? Drill bits.

@jasonstettenbenz4718 2 года назад

Did you build that work table? Do you happen to have the build plans somewhere or a video building it?

@731Woodworks 2 года назад

Yes I did, video here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CCnbT7qk9V0.html plans are on my website (link in description)

@billboy7390 2 года назад

All carpenters squares go out of square easy but is easy to fix. You should check all squares on a regular basis to make sure they are still square, even the nice woodpecker squares can go to square if dropped and hit just right. The only square that has remains square in the last 40+ years is my speed square.

@wordworking_awv 2 года назад

and off to amazon I go

@knotsgrainswoodworking4740 2 года назад

I like the woodpecker squares, but the cost is high.

@paulmichal 2 года назад

Lovein' the t-shirt. Where can I get one?

@731Woodworks 2 года назад

kerusso.com (linked directly to it in description)

@kellyblosl3320 2 года назад

Another great video,,,, But lets hold back on telling Woodpecker that they could charge more....I agree BUT,,,,,, LOL Have a Blessed Day!!!!

@731Woodworks 2 года назад

Lol

@jimbryant2157 2 года назад

I completely agree on the Incra V27. I got one for my DeWalt hybrid table saw and what an upgrade! Considering the cost of a Sawstop, why not partner with Incra to include the V27 (and probably increase the price) - sounds like a marketing opportunity for both companies!

@WoodworkingYouTubers 2 года назад

Good list Matt. the rockler bench cookies seem to have a better non-slip surface. Do you think that the Kreg blocks hold just as well or just good enough. I am not trying to be negative - I am just curious.

@731Woodworks 2 года назад

They seem to hold the same as the Rockler's. I couldn't tell any difference. Of course these are new out of the box so I guess time will tell if they get slippery over time.

@WoodworkingYouTubers 2 года назад

@@731Woodworks I would love to hear your opinion after using them both for a while. Thanks

@lucdesnoyers645 2 года назад

All squares, even really cheap squares. Are square when manufactured. All squares can get out of square if they get dropped or abused. Framing squares are often out of square because they are used for construction and are dropped a lot. Also their large size make them easier to bend than smaller squares. The great thing about framing squares is they can be fixed to be back square. Look on RU-vid for how to videos.

@gregcorrell396 Год назад

The setup blocks are currently not available on amazon

@brucewood4286 2 года назад

What species of wood is the board you use in this video? I made some picture frames from it but I can't remember what to call it. Lacewood?

@731Woodworks 2 года назад

It is leopardwood

@polyglot717 2 года назад

I love these videos, but I hate these videos. I love them because they are so useful, but it makes me want so much for my new shop LOL

@CHIPSpeaking 4 месяца назад

I am also curious how many (percentage wise) how many Woodworkers are firmer police officers. I'm aware of two, you and me. I was in municipal policing for 13 years.

@shockjock35 2 года назад

Do you like those set up blocks better than the Kreg Setup blocks

@731Woodworks 2 года назад

I like them both. It would be a toss up. Really depends on how well the Kreg hold up over time. I've had the Rockler blocks for a long time and they've never failed me. I think the Kreg's have some great features that the others don't have.

@rastarzynski Год назад

I paused at 9:54, and it seems like the woodpecker measurements on the squares line up on left, but DON'T line up toward the right. Optical illusion?

@disgruntledgrunt4259 2 года назад

Great video and some cool tools I need to relook at what I'm using in a few places. One you missed though is the pencil you're using. Literally the best $9 I ever spent on a pencil is the same one you're using. Perfect size lead, 2.8mm & really liked that it comes with multiple colors of leads. But I thought the best thing was the little sharpener built into the end that screws out so you can give it a good point from time to time. It also has the steel barrel that allows you to fit the pencil into tight places to make a mark.

@mikeyb2d255 2 года назад

Make your own push block for free

@steveeure5975 2 года назад

I too am dumbfounded as to why a premium table saw would come with such crappy miter gauges. Also, their push sticks that come with most saws leave a lot to be desired and most of the time are quite dangerous. And another gripe; why in the world can't they include a premium saw blade with the saws? They can't use the excuse that they are trying to save the consumer money because for the most part, we trash the included blades and other accessories and buy aftermarket ones. In essence, their not saving us anything at that point. Great video Matt. Most of the stuff you described, I already have. All but the new bench cookies. Thanks.

@brandoncrockett6477 2 года назад

👊🏻👊🏻👊🏻

@OneWildTurkey 2 года назад

Not sure if that's a good way to check the squareness of your old square. The idea is right, but I believe the implementation - - hanging part of it over the edge - - causes trouble.

@MichaelBrown-kk6ck 2 года назад

Matt, didn't TayTools send you something to clamp on your carpenter's square to keep it from sagging off the edge of the table? If you're not using it any more I could find a use for it.

@jac_builtWoodworks 2 года назад

What happened to your Harvey MG-36 Mitre Gauge?

@731Woodworks 2 года назад

Still got it and use it.

@robertgerardi5236 Год назад

Id rather watch a skilled woodworker then a very wealthy one.

@justinjovi 2 года назад

An engineer would say that you don’t need four bench cookies as three non-collinear points determine a plane😉 I would personally still use all four though just to be safe.

@thothtahuti5509 Год назад

Akurit video, unfortunately we don't get woodpecker tools where I'm from :/

@gregbarber8659 2 года назад

Where do you get your shirts?

@731Woodworks 2 года назад

Linked in description to this one. It's from kerusso.com

@jks52mchsicom 2 года назад

Matt another great video on tools. Please keep up the great work brother!!

@731Woodworks 2 года назад

Thanks 👍

@jks52mchsicom 2 года назад

Also thanks for your "Mother's Day" email. It was a touching story about your family. I printed it out for my wife and best friend of almost 48 years, Karen to read. It was also a testimony of the POWER of Christ in we Christian's lives, yours, mine and all that believe in the POWER of Jesus Christ!! I was blessed with a Christian mother and father plus a Christian mother in law and father in law. All four have gone home to Jesus. I am blessed also with a Christian wife, an only child, a daughter that is a Christian wife, mother of three (one has made their profession of faith) and physical therapist plus a Christian son in law.

@ZX9RDan Год назад

I love these videos. But if I bought everything you tell me that I need...I would have to find ways to obtain more money!!! ;)

@dezaraemcdonald7175 2 года назад

Where do you buy your wood from

@731Woodworks 2 года назад

wtghardwoods.com

@dezaraemcdonald7175 2 года назад

My husband is asking where you order your wood from

@731Woodworks 2 года назад

@@dezaraemcdonald7175 I get mine shipped from wtghardwoods.com I did a video on his store here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EsMhiGBho0s.html he can watch to see all he has to offer. Excellent service from Mark at WTG!

@HDBoyWonder Год назад

Why doesn’t Woodpeckers just produce a basic framing square that’s actually square?

@CHIPSpeaking 4 месяца назад

Why in the name of Sam Hill would you want a magnet to attract a bandsaw blade towards a setup die? It seems unsafe to me, would you elucidate please?

@gerdes1963 2 года назад

If you un loosen something, you're tightening it

@liamblackburn4968 2 года назад

So far that's 35 tools I need 😆🤣

@731Woodworks 2 года назад

Don’t forget about the 5 under $30, that’ll make it 40 😂

@liamblackburn4968 2 года назад

🤣 all joking aside, you and your channel have helped me alot 👍🤙

@scottmorris4914 2 года назад

I had a Woodpecker’s 1812 square. I said it was out of square, I had done the flip test with the square just like you did. They told me that the flip test is not very accurate. Thats the word that came from them (Woodpeckers) ……

@woodalive 2 года назад

Love the shirt

@alfonsomunoz4424 2 года назад

As iron sharpens iron...

@michaelgrimes8828 2 года назад

Matt, I am sorry but I can not afford $169 for a right angle square. Can you recommend a more affordable right angle square?

@731Woodworks 2 года назад

Swanson makes good products. I would grab a Swanson Speed Square, they can be purchased for under $30

@michaelgrimes8828 2 года назад

Ok, thanks, love the videos and the great insight.

@oldtireman4665 2 года назад

Between you and James Franklin, it’s a toss-up as to which of yinz is more dangerous to my credit card balance.

@731Woodworks 2 года назад

😂

@laff000 2 года назад

Sadly most power tool companies put crap miter Gauges with their machines

@brianwalsh829 Год назад

You asked why you are struggling to get more people to subscribe to you is you were such a good woodworker you was honest you showed you faults you was the man to watch but now your all about making money and getting free tools people want to learn not watch advertising they want to watch people building furniture and that’s were you went wrong your a nice guy but the free bees have took over your life sorry for being honest but you really are a nice guy

@themeat5053 Год назад

I'd have all these tools if someone would send them to me, gratis.

@Charles.Wright 2 года назад

Seven videos that my wife doesn't want me to watch...

@oharajarren3546 Год назад

Bro squared the square

@melprice 2 месяца назад

So I buy a new square, Can't afford Woodpecker. I test my old framing square and it'd not square. How do I know which of the two squares is not square? I could use the dual line method but then, why buy a new square? I know shiny red things are great but maybe I should spend the money on better wood?