HOW I CAN HELP YOU👇 👉 Grow Your FPV Drone Skills In 5 Minutes For Free brodiereed.store/ -------------------------------------------------------- I tried going for 15 minutes. Turns out I managed it even faster 😎
Please Please pleaaaasseee lower the music volume. Your voice audio isn't that great (mainly the reverb) so the Music audio takes over your voice way to much.
That ps4 controller tip is a great one, used that for about a month before i just got my fpv controller and they are pretty similar for just practicing. And nice video!
Hey there. Good Video! Thanks I just want to clarify number 50. It sounds like you are suggesting that pilot A can fly a Digital quad, and Pilot B can spectate using analogue goggles, As far as I know this is impossible. I assume you mean both pilots must be on analogue?
I assume you mean DJI but depending on what you are wanting to do. For example a cinewhoop style vs an open prop. For cinewhoop stuff. The iFlight Defender Series which Brodie has done a video on is great or something from Geprc Cinealog range. Personally have one and are great. Open prop. Have a look round 3.5 inch quads
Things you forgot: install a WiFly self powered buzzer and you will never loose the quad. Turn off the sound sequence on plug in in BF before using the smoke stopper. I also found that Velcro on batteries and quad is better than any sticky pad.
I'm sick of losing drones in trees tall grass and never buying another frame if a self powered buzzer can't fit in the frame. Sometimes gps rescue doesn't always work and always use a buzzer along with GPS.
dont use the tip of your solder iron for anything but soldering lolol they have a thin plating of nickel, or some shit, over solid copper. its important to leave it intact. another fun fact thought yall might appreciate that later on..
I feel like a smoke stopper is just an excuse to be bad at soldering... or a way to sell some cheap pcb and amass connectors for 35 bucks. really they won't actually save a quad, if it's shorted it will short even with a smoke stopper, that is why they say to quickly plug and unplug the smoke stopper as fast as possible; the device limits voltage to 5v, but most smaller quads only run 5v across the board anyway so the limited voltage won't save the quad. just actually double check your solder, use a multimeter, READ THE WIRING DIAGRAM, and everything will be fine.
I would ask in the edge tx or elrs Facebook groups for help. Some great people over there. Depends on what exactly "bricked". They are made so you can't brick them permanently but are soft bricked
@@alexwolfe957 as much as that has been a thing in the past. I believe they have improved a lot. I personally use a Zorro from RM but I have friends with the later Jumpers and have been fine