5050 vs 3528 LED Strip Differences High Quality by SIRS-E

Подписаться 15 тыс.

Просмотров 623 тыс.

50% 1

sirs-e.com/ | sirs-e.com/shop/led-lighting/...
SIRS Electronics, Inc. | USA Phone: 956-522-2006
Tambien Hablamos Espanol.
There are different types of LED strips all around. There are different variations, colors, and most important of all, sizes. Here at SIRS-E we carry 2 main sizes of LED strip chips. We have the 5050 size LEDs and the 3528.
The numbers you hear are a shortcut to the actual size. i.e. 5050 means 5.0 mm by 5.0 mm, and the 3528 means 3.5mm by 2.8mm. The Lumen output varies according to LED chip size; although the beam angle is the same for both at 120 degrees, the 3528 and 5050 strips can be similar in brightness.
This is due to the amount of LEDs in within the 16.4 feet the strips come in. The Dual Density 3528 strips have 120 LEDs per meter as opposed to the 5050 Dual Density strips which have 60 LEDs per meter. The main benefit in the 3528 LED strips is that they are a little over 1/4 of an inch, as opposed to the 5050 strips which are about ½ inch.
The 5050 LED strips is still a bit brighter than the 3528 strip counterpart, but if you do not have the room for the 5050, the 3528 is perfect for the job.
Product Link
High Quality RGB LED Strip & WP sirs-e.com/product-category/le...
Thank You for Watching!

Развлечения

Опубликовано:

2 июл 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 136

@rickevans7941 8 лет назад

Excellent presentation style. No wasted time. Very informative and straight to the point. Good job! Thanks!

@LEDlightsDMXcontrols_sirs-e 8 лет назад

Glad you enjoyed the video, please check out our website if you have any LED lighting needs www.sirs-e.com

@ushira_dharmaratne 8 лет назад

probably like one of the few channels that doesnt beat around the bush but at the same time keeps everything very informative ! XD props to you mate ! you've a sub from me !

@LEDlightsDMXcontrols_sirs-e 8 лет назад

+Plain Overkill , Hello and thank you very much for your comment. We try to provide all the necessary tools to our customers and we are very glad you enjoyed and found helpful our videos. If you have any additional questions or comments feel free to give us a call 956-522-2006.

@AmitGupta-ki4bt 10 лет назад

Short and informative. I had LED strip but did not know if it was 5050 or 3528, your video helped me to figure that out very easily. Thanks.

@geroluxlighting7365 8 лет назад

+Amit Gupta haha

@Z-add 9 лет назад

looking from afar, you can see the individual leds of the 5050. while the smaller strip with closer led placement looks like a light tube. I prefer the light tube look

@LEDlightsDMXcontrols_sirs-e 9 лет назад

Hello +MySchizo Buddy, you're right, a light tube gives a great look. Thanks for sharing your opinion. We're glad you liked the video.

@gughim 8 лет назад

Thank you!

@rmhutchins7 8 лет назад

I enjoyed your video. It was very helpful. Thank you!

@LEDlightsDMXcontrols_sirs-e 8 лет назад

+RM Hutchins Your welcome, happy to help. Please check out our website for all you LED lighting and DMX control needs.sirs-e.com/

@bobbell5928 7 лет назад

Good info. I use alot of leds under bars that i build. I have used both sizes. It seems the small size goes around corners better. Subscribed

@LEDlightsDMXcontrols_sirs-e 7 лет назад

Glad you enjoyed the video Bob, if you ever need any recommendations for some of your installs feel free to email us at contactus@sirs-e.com or check out our website www.sirs-e.com.

@ArchiesOrchids 9 лет назад

Thanks!!

@tfriedmann5908 7 лет назад

Hi, thanks for explaining the differences. I had a question about mounting the larger 5050's directly to something like wood. Is the heat output such that you would need an aluminum mounting track?

@LEDlightsDMXcontrols_sirs-e 7 лет назад

you wouldn't necessarily need the track, the heat output is not that much to affect the wood.

@tfriedmann5908 7 лет назад

Ok, thank you!

@miltjohnson9932 9 лет назад

Thanks, informative

@LEDlightsDMXcontrols_sirs-e 9 лет назад

Hi *****, thank you for watching our video and for your comment.

@LikkleRazii 8 лет назад

Hey there, i would like to know which led light would be good for the back of a tv, which would be mounted on the wall?

@LEDlightsDMXcontrols_sirs-e 8 лет назад

I would go with 5050 single density (30 LED per meter) sirs-e.com/product-category/led-lighting/led-strip-lights/white-led-strip-5050-wp/

@mikeharmon8733 6 лет назад

What is difference in current required per LED?

@jbravo70 8 лет назад

Hi, I've seen the 5630 led strips also which are super bright. They all seem to be in single colors. Can they be hooked up to those chasing or those light dancing remote controls?

@LEDlightsDMXcontrols_sirs-e 8 лет назад

+jbravo70 Hello, it all depends on the design of the strips themselves. I'd say looking to check with the company who makes those strips to be sure. We carry strips that are capable of being controlled DMX, feel free to check out our website www.sirs-e.com

@c4ldas 9 лет назад

Hello! I would want to know if I can cut the "LED STRIP" in small pieces (cutting on correct points, of course) and soldering the wires (red and black) between them. I want to illuminate some parts and have a gap without illumination, and again a illumination point, and other gap and so on. There is any problem?

@LEDlightsDMXcontrols_sirs-e 9 лет назад

Hi, Rodrigo Caldas ! Yes of course, you can cut the strips into segments. The beauty of LED Light Strips is their versatility. Like you said, be sure to cut only on the designated points of the strip.

@JKLauderdale 9 лет назад

You'll want to have a fine tip on your soldering iron, pre-tin the wire and copper tabs. Then it's just a matter of using a soft weight on the strip to keep it in place. Nothing hard or too heavy that may kink a resistor or diode loose. I use a gel-handled pair of pliers

@boydbros.3659 6 лет назад

thank you

@rajeevpandit1810 7 лет назад

Hello, Thanks for your video. Do you recommend transparent casing thru which I can run the LED strip. I am planning to put this strip in the gap of falls ceiling. This will help me cleaning the dust without damaging LEDs. I stay in Mumbai, India.

@LEDlightsDMXcontrols_sirs-e 7 лет назад

Hello Rajeev, please email us at contactus@sirs-e.com and someone can assist you further.

@lindsaywatson3185 8 лет назад

I'm wanting to install LED strips on the front of a mirror with a cover over it. Even with the cover diffusing the light, I'm concerned that it may still appear as dots. Which would you recommend for more of a "light bar" effect?

@LEDlightsDMXcontrols_sirs-e 8 лет назад

Hello, I would recommend going with the 5050 model.

@humzamalik3752 7 лет назад

Lindsay Watson Did you ever go fourth with that mirror project? Im wanting to do something similar and wondered if you got the light bar effect or did it still look like dots of light?

@scooterss2112 7 лет назад

is it the controller that would make chase lights out of these strips?

@LEDlightsDMXcontrols_sirs-e 7 лет назад

In order to achieve chasing patterns you will either require pixel by pixel controlled strips, or the strips that are pre programmed, these are standard LED strips which means they are controlled all together, here is a link to our Direct DMX pixel by pixel controlled LED strips. sirs-e.com/product-category/led-lighting/dmx-rgb-led-strip/

@mr.t-klas8282 8 лет назад

very good video...i would like to buy one of those lights to put them under my music keyboard to light the other one (one is on the top of another)....but i dont know wich one is better.....sorry for my bad english.....any advice...?..thanks...

@LEDlightsDMXcontrols_sirs-e 8 лет назад

No problem at all we can definitely help you out, feel free to email us at info@sirs-e.com would you like the 5050 model, or our 3528? Here are links to both. 3528 is smaller but is capable of more LED's per meter, while the 5050 has more light output.sirs-e.com/product-category/led-lighting/led-strip-lights/white-led-strip-5050-wp/sirs-e.com/product-category/led-lighting/led-strip-lights/white-led-strip-3528-wp/

@adeelrehman29 7 лет назад

for bedroom behind curtains and back of computer table etc. should i get 5050 or 2835?

@LEDlightsDMXcontrols_sirs-e 7 лет назад

You can probably use 3528, If you use the double density it will give you a more diffused.

@lifeisgood070 9 лет назад

Good explanation. Appreciate it. Watts per foot would've been a nice statistic too. Looking to put these in a Truck Cap - hoping the wattage is very low so I can run 2 strips and an LED dome light. It should be easily possible.

@LEDlightsDMXcontrols_sirs-e 9 лет назад

Very happy that you liked it. Thanks again for watching! lifeisgood070

@kensimon4478 9 лет назад

SIRS Electronics Inc hi there. i bought this 5M/16Ft 5050 RGB 300 LED LED Strip www.ebay.com/itm/391044936635. I wasn't too happy with it's brightness. I wanted the brightest RGB strip i could find and could only find the 5050. I've used it for a few days but i'm not impressed with it's brightness. I checked online and found out that if i powered it on both ends with the same cheap power adapters it came with i could get a little extra brightness off it. I bought 2 LED strips so i'm now using 2 power adapters on one strip. It looks a little bit acceptable or closer to what I wanted. i found out from this discussion electronics.stackexchange.com/questions/19413/why-doesnt-my-5050-led-strip-draw-as-much-power-as-i-expect that there is some power lost in the cable. My question is is it safe to use a 16V 4.5A (72W) laptop adapter to power the 5050 RG LED strip? What's the difference btwn powering one 5M 5050 LED strip with a 12V 6A power adapter vs 16V 4.5A power adapter? They are both 72watts, aren't they? Or should i step up to 5630, 7020 or 8020? I'm looking to light up a store window display.

@LEDlightsDMXcontrols_sirs-e 9 лет назад

Hello Sir Jay, thank you for watching our video and for your question. Unfortunately a 16V power adapter will not work because your LED strip is rated for 12V, even if they have the same wattage. Visit our website at www.sirs-e.com and take a look at our high-quality LED strips and power sources, including our new line of battery packs.

@derekrobinson4636 8 лет назад

+Sir Jay This using two different adaptors at either end of a strip is not a good Idea as the PSU are fighting each other and unless they are designed to work in parallel can cause a problem as in early failure, overheating or fire.

@lifeisgood070 8 лет назад

ended up doing it serially. Good food for thought there though. I really should know more about psu's and how that interaction occurs. Thanks Derek.

@wade.bmaharaj3640 6 лет назад

i want to get the GRBW LEDS for my room to apply on the edges of the ceiling. Which one would you recommend? For the best effect ?

@LEDlightsDMXcontrols_sirs-e 6 лет назад

Hello, we only carry the 5050 chip now and i believe it will work fine for your application.

@wade.bmaharaj3640 6 лет назад

SIRS Electronics Inc thank you responding

@MrMrSaldana 8 лет назад

thnx for thie video dude,,i been looking for a comparison video couldn't find one till I founf this one,,thanks a bunch,,,it seems as the 5050 rgbw allows two colors at once,,true/false,,is it possible with any of these strips on the market,,thnx

@LEDlightsDMXcontrols_sirs-e 8 лет назад

+GetYourGameOn “GamerBrainz” It is possible to run two colors simultaneously with the RGBW LED strip.You can also mix the colors to create more complex colors.

@MrMrSaldana 8 лет назад

kool,,thnx for the response

@nothingless2199 8 лет назад

Can i use RGB 5050 or 3528 for hydroponics ? If yes, what else led support should be used beside LED itself ?

@LEDlightsDMXcontrols_sirs-e 8 лет назад

+Nothing Less, This is not are area of expertise, but I am assuming you want the option that produces the most light which would mean that you are going to want the 5050 double density waterproof option. The benefit that LED's can also offer is the ability to offer more lighting without the addition heat. This means you can have more lighting directly applied to your plants. Feel free to reach out if you would like to put a project together @ sirs-e.com/contact-us/

@tanariacarey 7 лет назад

which do people use most for under-lighting car kits? 3528 5050 or 5630? thanks in advance.

@LEDlightsDMXcontrols_sirs-e 7 лет назад

I would say the 5050 model would be best, IP68 rated, please check out our page. sirs-e.com/product-category/led-lighting/led-strip-lights/high-quality-rgb-led-strip-wp/

@magidimag8267 7 лет назад

Is the RGB Led strip 3538 enough brightness for in my computer, or is it to dark?

@LEDlightsDMXcontrols_sirs-e 7 лет назад

Hello Markus, we only have 3528 available in white. Here is a link. sirs-e.com/shop/clearance/3528-5050-led-strips/3528-smd-white-led-strip-8000-9000k-5m-16-4ft-double-120-m/

@CauseImYourFat 7 лет назад

how many watt do we need for 5050 /m ? and some question for 3528

@LEDlightsDMXcontrols_sirs-e 7 лет назад

It depends on the LED strip your using, if you visit our website, all of our LED strips contain data sheets with very useful info that I feel will answer your questions. www.sirs-e.com

@pinyang8782 9 лет назад

I just brought a 3528 led strip and 4 CR2025 lithium sony battery. I am wondering if i could power up my led strip with these 4 batteries? My circuits knowledge are bad.

@LEDlightsDMXcontrols_sirs-e 9 лет назад

Hello Nishimoto Mitsukuni, the 3528 LED strip uses 12V DC to power up and depending on the density and color it consumes different power wattage. The CR2025 batteries you have are 3V and theoretically 4 batteries in series will give you 12V, but the capacity is nowhere near sufficient to power up the strip; it will turn on for very little time. I would suggest our high quality Lithium Polymer battery packs which come in different capacities and are specifically made to run any LED applications for several hours. Check out one of our videos on this topic here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-k-rlqBOP7b0A.htmlnd you can find LIPO batteries for LED Strips sirs-e.com/product-category/led-lighting/led-strip-batteries/ If you have additional questions feel free to email us at contact@sirs-e.com

@TonyMontana-os8ri 8 лет назад

For 15 meters of 5050 what adaptor would be save to use? Will 10A be save enough to light it up. Heard stories that the full kits that r sold in market are cheap and Amperage is 3A. Cheers

@LEDlightsDMXcontrols_sirs-e 8 лет назад

+Mariusz Łysik Hello, are you talking about quick connectors? Single or double density? Our single density you can do 3 rolls for 6A and our double for 12A as far as packages our smallest uses 2A for 5m and our smallest uses 8A for 10m. Our single density 5m uses 2A and our double uses 5m uses 4A.

@ntl9925 9 лет назад

Can you connects a 3528 strip to a 5050??? PLEASE HELP! Thank you! Your video's very infomative.

@LEDlightsDMXcontrols_sirs-e 9 лет назад

Hello Matthew Kimball, thank you for watching our video and for your comment. Yes you can connect a 3528 to a 5050 LED strip. Try to keep both strips' specifications in mind when doing so. Also watch out for voltage drop.

@anch1994 8 лет назад

but does the size matter in terms of light production? example, larger diode more lumens, brighter light etc.

@LEDlightsDMXcontrols_sirs-e 8 лет назад

+Terra Anch Not necessarily, it all depends on the quality of the LED. Phosper purity is the main thing you want to look at when knowing the difference between high quality and low quality LED's.

@HWALK 7 лет назад

Can you connect 5050 LED strip with a 3528 LED strip? or is there not enough voltage to power the 5050 because of the smaller wall plug-in?

@LEDlightsDMXcontrols_sirs-e 7 лет назад

Yes you can, as long as the voltage is the same.

@Jovan919 6 лет назад

I was looking for that answer, thank you..

@timtimdrums 6 лет назад

I am little bit confuse about what should I get. My plan was put into the Computer table , but my background is the curtain. What should I get? 3528 or 5050?

@LEDlightsDMXcontrols_sirs-e 6 лет назад

Hello, i feel that is something that would be at your discretion. Our product line has drastically changed since this video as we no longer carry 3528. Feel free to check out our website. www.sirs-e.com

@edgelmendoza1094 8 лет назад

and is there a computation for how many LED's fit for the Power Supply?

@LEDlightsDMXcontrols_sirs-e 8 лет назад

+Edgel Mendoza , yes there is. Depending on how long your strips run and how much power its consuming. Here are some videos to help you understand how to figure this out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-y5qyZXEDnv8.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WZZ6ZlAFPls.html hope this helps.

@georgkettele6911 8 лет назад

What are the best LED for producing the widest range of RGB Color?

@LEDlightsDMXcontrols_sirs-e 8 лет назад

+Georg Kettele Hello we would recommend the RGBW 5050 double density strip with the reasoning being that it has a greater lumen output and will really give you a more distinguishable color for your mixing and matching purposes. You will be able to achieve those pesky little pastel colors that you wouldn't be able to achieve with regular RGB otherwise. Please check take a look at some of our products here sirs-e.com/product-category/led-lighting/led-strip-lights/a-grade-rgbw-led-strips/

@oscarsoons2637 8 лет назад

which would you say is better for the back of a monitor

@LEDlightsDMXcontrols_sirs-e 8 лет назад

+oscar soons , Hello and thank you for your comment. It all depends on how big your monitor is and how far is from the wall. My recommendation would be a 3528 Double Density strip since it will distribute the light more evenly in small spaces, but let me know which one you like best.

@jaquarmabalacatcity4602 7 лет назад

thanks for the info.

@LEDlightsDMXcontrols_sirs-e 7 лет назад

your welcome, please visit our website www.sirs-e.com

@puputtvv 9 лет назад

why my green light is all the way on when i press red or blue or even i press off the green light is still on ~ mine is 3528 led

@LEDlightsDMXcontrols_sirs-e 9 лет назад

Hi ng jianpu, thank you for watching our video and for your comment. It seems that you are having errors in your connections. If you ordered from SIRS-E send us a picture and explain your problems here sirs-e.com/contact-us/

@cherylseaangel153 9 лет назад

Nice job explaining the difference. I need to run 63' or 20 meters of warm white LED ribbon lights around my deck hand rail. Is there a way to do this by linking the strips together and only having one power source (at one end)? If not what would you suggest?

@LEDlightsDMXcontrols_sirs-e 9 лет назад

Hello Cheryl SeaAngel, thank you for watching our video and for your comment. It is technically possible to have 4 LED strips (20 Meters) with one power source but your power source will not be at the end, rather between 2 strips. This will work for some single density strips. It is not a simple answer but you have many factors to consider such as density, LED strip type (5050/3528), and Waterproof Rating.

@cherylseaangel153 9 лет назад

SIRS Electronics Inc Thank You very much for your response. I don't want the lights to be bright and over powering, I assume I would want warm white 3528 strips. The position of the only 110 outlet on my balcony/deck is at one end and the balcony/deck is 30' or more off the ground. We are in a Ski Resort at 8k feet above sea level with very cold winters. Would I need to run an outdoor extension cord to the center point?

@LEDlightsDMXcontrols_sirs-e 9 лет назад

Hi Cheryl SeaAngel, an extension cord can work. Due to your weather conditions I would recommend you use strips that are IP68. This is because, unlike IP67, IP68 can protect your strips against moisture and condensation. Here's a test we did so you can see how water can affect your LED Strip ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nGpmyvow9R8.html

@rpeagram 9 лет назад

Thanks for the info... Is the cold white a true 12000k...... I'm looking for 5050 or 3528 in a temperature of 12000k.... Thanks again.

@LEDlightsDMXcontrols_sirs-e 9 лет назад

Hello rpeagram, thank you for watching our video and for your question. Yes, the Cool White will have a color temperature of 12000-14000K and we have them available in 3528 or 5050 LED strips. You can check out the 3528 Dual Density Cool White which will have 120 LEDs/m: sirs-e.com/shop/white-led-strip-3528-wp/3528-smd-cold-white-led-strip-12000-14000k-5m-16-4ft-double-120/ Or check out the 5050 Dual Density Cool White which will have 60 LEDs/m: sirs-e.com/shop/5050-double-density-led-strips/5050-smd-cold-white-led-strip-12000-14000k-5m-16-4ft-double-60/

@rpeagram 9 лет назад

Thank you for your time.

@1WildDragon 6 лет назад

is there a difference in watts per ft'?

@LEDlightsDMXcontrols_sirs-e 6 лет назад

Hello, yes they are, but our product line has drastically changed. Please visit our website www.sirs-e.com

@808hanky 7 лет назад

Which one uses more power?

@LEDlightsDMXcontrols_sirs-e 7 лет назад

Hello, it varies depending on density and efficiency, generally 5050 uses more power.

@jrgroe332 7 лет назад

My mother-in-law has a Denver Bronco that hangs on the wall with incandescent lights on it in a tube and zip tied to a metal frame. Sections of the lights in the middle are not working and I want to replace it with LED's. In doing my research 120v LED strips would give me the length I need but with cut intervals of approx 3 feet won't work when I need to change from one color to another. 12v LED strips give me the cut lengths I need. Each of the listings say I can't go to the length I need. If I use a 12 watt power supply how long can go with 12v strips?

@LEDlightsDMXcontrols_sirs-e 7 лет назад

With our strips at single density you can go 2 full strips without voltage drop (32.8 ft) and with double density you can go 1 full strip (16.4 ft) please check out our website at www.sirs-e.com or email us at info@sirs-e.com for more information.

@jrgroe332 7 лет назад

Thank you for the answer but I need around 36 feet.

@LEDlightsDMXcontrols_sirs-e 7 лет назад

anything after the recommended lengths we advise added a booster amplifier, however it can be done without one.

@cristiansiri4007 7 лет назад

can i work a led strip 5050 with a battery 9v? 24K remote control, and 18 leds

@LEDlightsDMXcontrols_sirs-e 7 лет назад

It just depends on the specs of your strip, you would need to check the strip you have, like the voltage and watts consumed, things of that nature.

@Ejazzle 9 лет назад

How can I connect three strips to one power source ?

@LEDlightsDMXcontrols_sirs-e 9 лет назад

Hi +Ej Peterson, thanks for watching our video and for your comment. You can connect them in series or in parallel, but you might experience voltage drop. Make sure you watch your power consumption and calculate the wattage of your power supply first.

@nobody3745 8 лет назад

its changing the length?

@LEDlightsDMXcontrols_sirs-e 8 лет назад

The length is the same, the size of the LED is different.

@fish8088 9 лет назад

Hi, I have a 5050 rgb led strip and I only use 1 meter long...my question is which power supply should I use for only 1 meter long, is it 12v 1a or 12v 5a? Which is better?

@LEDlightsDMXcontrols_sirs-e 9 лет назад

Hello +fish808, thank you for your question and for taking the time to watch our video. A 12v 1 Amp strip should work, but I cannot be sure because I do not know the specs of your strip. Just go with the 5A to be safe.

@LEDlightsDMXcontrols_sirs-e 9 лет назад

Mr100duke, actually some strips can consume up to 1 amp per meter, it all depends on the strip.

@fish8088 9 лет назад

SIRS Electronics Inc sory for my really late reply, but im using right now the 5a for only 1meter long, and there is no problem yet, my strip still working fine, its 2 months now, ....but anyaway thanks for the respond :)

@edgelmendoza1094 8 лет назад

what does mean the DD and SD?

@LEDlightsDMXcontrols_sirs-e 8 лет назад

+Edgel Mendoza , SD stands for Single Density and DD stands for Double Density. The density refers to how many LEDs per meter the strip has. The 5050 LED strips have a Single Density of 30 LEDs per meter and a Double Density of 60 LEDs per meter. The 3528 LED strips have a Single Density of 60 LEDs per meter and a Double Density of 120 LEDs per meter.

@mr.m.o.g.o.m. 7 лет назад

What is dual density?

@LEDlightsDMXcontrols_sirs-e 7 лет назад

Hello, dual density is referring to the amount of LED's per m on the LED strip, our double density is 60 LED per m while our single density is 30 LED per m.

@minoqwe 6 лет назад

Which illume more???

@LEDlightsDMXcontrols_sirs-e 6 лет назад

Hello, the 5050 model, we actually do not carry the 3528 anymore.

@sirbennyhannaduhh6294 9 лет назад

so? can these led strips run 1000 watss?? if so how?

@LEDlightsDMXcontrols_sirs-e 8 лет назад

+Ruiz Sage If you are talking about using a 1000 Watt power supply, sure thing, but do not forget that regardless of the power supply, due to voltage drop you are still looking at a limited LED run depending on a specific LED strips density. If you got a project that you want to run by us, please reach out @ sirs-e.com/contact-us/

@valiachasapi254 9 лет назад

Can i connect with wire and soldering: 1m of an smd 3528 (7.2 watt/m) led strip to 1m of an smd5050 strip (again 7.2 watt/m) ??

@LEDlightsDMXcontrols_sirs-e 9 лет назад

Hello valia chasapi, thank you for watching our video and for your question. Before you get into soldering LED strips we would like to recommend for you to consult a licensed electrician to make sure you get everything soldered and connected correctly. Now, you can solder a 3528 LED strip and a 5050 LED strip as long as they're both single color only. If you need information about Power Consumption watch our video on how to Find the Power Consumption of Any LED Strip ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WZZ6ZlAFPls.html

@Bayward 8 лет назад

3528 sounds smurfy!

@geroluxlighting7365 8 лет назад

+Bayward hah, yes

@rugbycressard 7 лет назад

so which one makes more light???

@LEDlightsDMXcontrols_sirs-e 7 лет назад

If you compare single chips side by side, the bigger of the two LED's will produce more light.

@rich1051414 6 лет назад

5050 will output more light for the surface area, but the 3528 will have less 'dotted line effect', as well as offering greater resolution(higher pixel density) when used for LED displays.

@tinoban 7 лет назад

Is it possible to put these strips as lighting for whole house? and which would be better for maxium efficency

@LEDlightsDMXcontrols_sirs-e 7 лет назад

Hello Tino, yes it is definitely possible, and there are so many color temperature options I feel it would be ideal, and they consume less power as well. If you have any further questions please email me rj@sirs-e.com and I can help you with some recommendations.

@131kidflash 9 лет назад

Which one would be brighter given the same k temperature being one has more leds per netter I believe you said

@LEDlightsDMXcontrols_sirs-e 9 лет назад

Hello 131kidflash, thank you for watching our video and for your question. Normally, the higher the K temperature, you get more efficiency (lumens per watt).

@KevinMinato 8 лет назад

are all 5050 multi color

@LEDlightsDMXcontrols_sirs-e 8 лет назад

+Kevin Minato You can definitely get 5050 in many options. Examples include, white, warm white, cold white, etc. Here is an example: sirs-e.com/product-category/led-lighting/led-strip-lights/white-led-strip-5050-wp/

@spectralgkxd4727 7 лет назад

Can I first put 3528 for 5 meters, then connect 5050 for another 20 meters?

@LEDlightsDMXcontrols_sirs-e 7 лет назад

The only way you can make a continuous run like that is by accounting for voltage drop, and using the proper booster amplifiers, or powering the strips directly. You will need to check on the power consumption of you LED strips.

@fawzytanourafoash6061 7 лет назад

SIRS Electronics Inc

@bharathkumar5299 8 лет назад

how much voltage required for each

@LEDlightsDMXcontrols_sirs-e 8 лет назад

+bharath kumar , Hello and thanks for your comment. Most of our LED strips are 12V DC with the exception of our DMX LED Strips which come in 5V DC. If you have any questions or need assistance with a project, feel free to email us at contact@sirs-e.com or call us 956-522-2006.