52” Wood Ceiling Fan w/ Light - Installation & Review 

If I remember correctly, the screws you need to screw the decorative canopy are pre-screwed into the base. If you remove those, and then slide up the canopy, you will have screw holes to mount the canopy to. If you roatate your canopy around, see if you can see screws under any of the mounting holes. If so, you will need to unscrew those and reapply the decorative canopy.

It has a 5 and a 10 inch down rod. If using the 5" downrod, the bottom will be 16" from the ceiling.

Thank you!!! That’s right to the bottom of the light correct? And you’re still happy with it?

I am having the same problem. Have you found any solutions yet?

Yes, if the light switch is properly connected to the fan's junction box, it will work just fine.

I installed this (Brand: Obabala) Everything worked fine, but the light and my existing light switch. If you have the light on and the wall light switch on, and turn the wall switch off, when you turn the wall switch back on the light will not come on. You have to initiate the light from the remote. Terrible design.

If you have a wobble, use the clip(s) as a temporary weight to see where you need to install a weight.

I didn't have to pair mine, I just put in the batteries and the remote worked for me.

One works. The other doesn't. 🤷

I like the light! The remote makes adjusting it easy and the different color temperatures are a really nice feature! The last ceiling fan I installed only had one color temp, so this one is pretty cool!

@@NeedWantBuy Ahh good to know that! As I’m replacing the current light source with this, and after which this will be the only light source in my study room. So will it be a good option?

In the room I installed this, I have the ceiling light as well as a little reading lamp. The two are plenty to light the room. The warmer color temps of the ceiling fan are nice to use when reading at night. It helps me with migraines, then switch it to brighter white during the day. If it's a smaller room this light should be plenty, but a little reading lamp would never hurt in a study room! 😄

At 2:48 (secure it with the screws you removed earlier). Which screws you are referring? I didn’t see it in the video. Are these the ones that were attached to the mount ? I’m having hard time to install the decorative cover.

same question. It is not shown in the video. @@SPC123-uo1mo

Hi there. I installed this for a friend at their house. I can't make an updated video, but maybe I can help. The blue cable is the light power, black is fan power, white neutral and green ground. You'll connect the blue and black wire of the fan to the black power supply wire, the neutral white wire to the white wire and the green ground wire to the exposed ground wire of the power supply cable. Tighten them together with wire nuts and you're good to go!

Omg thank you, yes these instructions are awful.

My fan has a white, a black, and a green wire. I have black, red, and white from the ceiling. There is no blue. Please advise...

@@NeedWantBuy hi, what if the wires in my ceiling instead of blue, it's red?

​@@brandonbrimer8417when you have red wires, you'll either connect red to red, or red to blue. This wire brings power to your light!

If my house burns down, I'll make a video update. 😂 However, I trust all the positive ratings, and have liked my experience so far. Before this, my worry was the old wobbly fan falling down on me in my sleep! Now I can sleep easy. 😊