533 Tiny Trainer is even better with HDZero | PART2

Подписаться 335 тыс.

Просмотров 19 тыс.

50% 1

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
Buy the 533 Tiny Trainer FPV Crate "solderless" edition at:
* FPV Crate - bit.ly/3xw61fr
-- TABLE OF CONTENTS --
0:00 - Let's configure the Tiny Trainer!
0:23 - Flash Betaflight to the FC
• Betaflight 4.3 Install... - Betaflight download and install video
2:24 - Get the receiver working
ELRS setup video - • ExpressLRS definitive ...
Crossfire setup video - • TBS Tracer Crossfire c...
Ghost setup video - • ImmersionRC Ghost Comp...
How to setup widgets in EdgeTX and OpenTX - • The best use for your ...
How to configure channel mapping and endpoints in Reciever tab - • Beginner Guide $120 FP...
6:36 - Set up ELRS link options
8:16 - Set up my rates and OSD settings
9:41 - A few other small options I like to tweak
10:15 - Set motor position and directions
11:34 - Set up HDZero system
HDZero complete setup guide - • Shark Byte HDZero comp...
13:46 - PID tune!
15:31 - Finish assembly
17:54 - Why do people love this thing so much?

Опубликовано:

28 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@acrazypilot7769 2 года назад

Make a video comparing the analog quad vs hdzero quad

@BogHopperFPV 2 года назад

Yes a video comparison between analog and HDzero would still be interesting

@benupde1979 2 года назад

JB has a video for everything. For that i’m thankful! Thanks JB! I def wanna see an analog vs hdzero comparo.

@fishman241 2 года назад

Wow, that tune is fantastic. Thanks for finally pushing me onto the release candidate build.

@fishman241 2 года назад

Oh, and if anyone has, like me, a bunch of 1.5mm props sitting around, I was able to drill the center hole out using a 5/64ths twist drill(1.98mm) and still friction mount them. Though I used the screws still. (I like more pitch than the stock props for freestyle.)

@littlehobbies 2 года назад

Definitely would enjoy a comparison of the two just for fun

@CaptCalgary 2 года назад

Great break down. Thanks JB

@demofpv9510 2 года назад

Love the video as usual. Would love to see the comparison video between the two

@ChristKrew-Rev1.8 Год назад

Make it!!!!!!! Thank you for the content!

@RCinginSC 2 года назад

Yes. Let's see it fly !

@verdi6092 2 года назад

A tip.. I cut a rectangle acrylic sheet to hold down the ufl by making a bridge bolted between the two vtx bolts.. i do this on my naked vistas

@DavidBarbarine 2 года назад

Great video! Please make the flight video. 🙂

@douglasyoung3992 2 года назад

Upgraded to the Axisflying Thor Elrs module, its very refined and 1 watt also!👍

@kelvinwolf225 2 года назад

We need more Bardwell racing videos! So yes, please do a flight review of the hdzero tiny trainer :)

@infinityfpv110 2 года назад

Great video

@JekleFPV 2 года назад

Make the damn video! I came here just to see your reaction upon first flight with this! Don’t leave us hangin’ bro!

@JoshuaBardwell 2 года назад

There's a reason I couldn't include flight video 🙁

@JekleFPV 2 года назад

@@JoshuaBardwell obviously now we’re all curious as to what that reason is… DJI/Caddx/walksnail/fatshark paying you not to? 🤪😜

@toxicfpv304 2 года назад

@@JoshuaBardwell did you burn out your aio also? Lol. I definitely went a little too tight on the first aio and shorted it out some how. Only get first three beeps now. And I'm 100% it wasn't my soldering job as everything was good before I stacked it together and tightened the nuts. Thankfully I got that aio almost half price during a blowout sale. I had a back up ready to go.

@chriszachem2012 2 года назад

Thanks!

@RyanQuellet 2 года назад

Nice. Let's see the flight video!

@Anzyclos 2 года назад

Still waiting for the flights and comparisons-video for this one, JB! 🤩🤩🤩

@redalin-nz 2 года назад

Great tutorial! I'm surprised you didn't use the Preset for HDZero to set the port and MSP out

@661FPV 2 года назад

Hope your using 10.8 Rc6 configurator as well

@661FPV 2 года назад

Elrs presets would set the reciever protocall for you

@MCsCreations 2 года назад

Fantastic work, Joshua! Thanks for all the tips! 😃 I'm definitely looking forward to the flight video! Stay safe there with your family! 🖖😊

@13FPV 2 года назад

What is the white straw at the back? Edit: Ohhh, it’s the turtlemode thingy!

@ugellin Год назад

Does the tune for this quad increase or decrease performance?

@Matt-xy6cf 2 года назад

And even better with dji and cutting relief for extra stack height?

@runpuppyfpv5744 2 года назад

This build makes me wish I had switched to hdzero and elrs

@wearemany73 2 года назад

Woooot! Let’s do this…🤓

@tlewis3083 2 года назад

I am just finishing up the tiny trainer V2 Hdzero. I am using the happymodel ep2 reciever and that Aion nano 2.4ghz module on the Zorro. I have updated the firmware if both the module and the Rx with the same 2.5 version of elrs. Same binding phrase and settings. The radio picks up telemetry fine and the RX shows bound. I'm using uart 3 and have that set to serial Rx. Unfortunately I'm not seeing any stick movement on my channels in betaflight. Any help would be much appreciated!

@JoshuaBardwell 2 года назад

You should probably email me so we can discuss it.

@v4ng3n 2 года назад

Make it!

@bunbunson27 2 года назад

whats the AUW with a 3s lipo?

@661FPV 2 года назад

Does your "all modes one channel" setup work on Elrs where arming must be aux 1 high?

@661FPV 2 года назад

Lol guess not, saw you mumble something about using the wrong modes at the end

@chilloutfpv991 2 года назад

If u flash bluejay and your quad dies it be great if u could reply this . I'd been flying mine for years with no prob till I flashed bluejay . After 3 flights now it's dead thx

@CostaFPV 2 года назад

Dude, I enjoy red tapes because of you ahahaha

@timotejmierva4794 2 года назад

Please, make that video on flying that

@williambeckett4295 2 года назад

Seriously… really….. it wouldn’t be a JB build without the red electric tape.

@SkyCandyVisuals 2 года назад

I gave JB that red electrical tape at Rampage 2021 & he is still annoying you by using it 🤣😂 yaaaas ! 16:45 But me I'm more annoyed that you didn't show us the flight 😒 🙄 😆

@JoshuaBardwell 2 года назад

Well, there's a reason for that. Maybe it will be a subkect if a future video.

@user-vr1qv6qe7f 2 года назад

I say do the comparison and leave bf 4.2 on the analog. Then update it so you have multiple variables to cover on a small racer. Lol

@sebastianpolanski1117 2 года назад

Is this build for racing only or can do some freestyle as well?

@ugellin Год назад

You can definitely do some freestyle with it as long as you're used to flying with a high camera angle. The stock camera mount is like 45 degrees minimum.

@radholm2628 2 года назад

OMG, you have to make the video actually flying the thing!

@iversonwin 2 года назад

To confirm the error is truly 0 using dshot 600, aren’t you supposed to spin the motors up?

@baggszilla 2 года назад

Yeah I would have spun the motors up to see if any errors. Usually F4 FCs running RPM Filtering you run DShot300. JB ran DShot600 OH Oh

@minaexperiment 2 года назад

@@baggszilla I agree, I have had errors when running all at the same time but not one at a time so best to test all possibilitys. Run each on its own and then all at the same time.

@baggszilla 2 года назад

That's why JB said in the video "Let's take it for a rip to see what we missed in the configuration" lol

@burnfpv3888 2 года назад

Only came here for the flight dang gabbit

@felipenomade 2 года назад

Missing fly the quad 😭

@hoagietime1 2 года назад

Someone go to JB's local home Depot and hide all the red electrical tape!

@z506fpv5 2 года назад

Do the flight video!! HDZero on the TinyTrainer is really good. When I began practicing with HDZero, didn't seem like a great improvement over analog but I liked the fixed latency, is just like analog, predictable. I broke my Vtx and had to go back to analog... the first 5 packs my brain was crying for the lack of definition in the image. The main advantage I noticed for the "racing" I do, is that because the image is more clear, I feel more in control of what the quad is doing. All that to say, you should tried :)

@TweakRacer 2 года назад

You got rid of your DJI setup because the variable latency was holding back your “racing”?

@z506fpv5 2 года назад

No, I have 3 quads with DJI. I liked for cinematic and exploration flying.

@davecarter4129 2 года назад

make ittttttttttt

@Adam_Carbone 2 года назад

Is someone able to help me? I have a FC with a "MambaF405" firmware target and every time I try to flash it, it gets halfway through and then the port closes and it doesn't progress from there. Windows says that the USB device is not recognized, and I don't know what the proper method would be for getting the right drivers. I have tried Zadig so far but no luck. Any help is appreciated 😊

@Kartwheelfpv 2 года назад

Download the impulse rc driver fixer and run it with your fc plugged in and that’ll solve your issue 😁

@Adam_Carbone 2 года назад

@@Kartwheelfpv Yeah I was looking into that, is it a safe/trusted application because it always shows up with the window defender blocking it

@Kartwheelfpv 2 года назад

@@Adam_Carbone yes it’s safe a lot of people have used it tons, it fixes the boot driver. That’s why your having issues flashing

@Adam_Carbone 2 года назад

@@Kartwheelfpv Okay thanks for letting me know! Do you know exactly what it does to fix the issue? My board does go into DFU mode already

@Kartwheelfpv 2 года назад

@@Adam_Carbone it makes it so when it goes into boot loader the computer can still talk to the fc because it’ll now have the correct driver. Let me know if that helps

@dennyrodman2022 Год назад

3 month left. d&mn, where is part3??? 😔

@gqp3215 2 года назад

Electric tape is almost best fiber tape

@kalinkha 2 года назад

Im seeing problems coming out of dat beta aio🤐

@lukebenner7604 2 года назад

Why not 500hz?

@TheElectroHawk 2 года назад

Probably because you get a lot more range

@P-Bee 2 года назад

WHAT. You might not make the flight video! I don't even have a tiny trainer but I do have HDZero. I have watched all the way through both videos for the flight footage and now you say you might not make it. 😢 I want to see you rip that thing in HD.

@JoshuaBardwell 2 года назад

There's a reason there's no flight video. It'll be the subject of a future video.

@P-Bee 2 года назад

@@JoshuaBardwell Great news :)