6.7L Powerstroke Oil Leaks | 3 Tips To Permanently Fix These Issues

Подписаться 179 тыс.

Просмотров 122 тыс.

50% 1

Over the years, I’ve repaired hundreds of 6.7L Powerstroke oil leaks. In this video I give you my top 3 tips for permanently fixing 6.7L oil leaks!
Thanks for watching!
🔔 Subscribe & Ring Bell: / @flyingwrenches13
⬇️ Must Have Amazon Tools
1. Pocket Scanner: amzn.to/3wjDaXi
2. Jump Starter: amzn.to/2TKp4B3
3. Pro Level Scan Tool: amzn.to/2SYdhi4
4. 1/4” GP Socket Set: amzn.to/2TDramn
5. 3/8” GP Socket Set: amzn.to/3dUBQDY
6. Extension/Adapter Set: amzn.to/3hXXNmV
7. Rachet Set: amzn.to/3r1EAow
8. GearWrench Set: amzn.to/3hMn432
⬇️Download ForScan For Free | Ford Specific Diag Software ree
1. ForScan Link: forscan.org/ho...
2. Recommended OBD Adapter: amzn.to/3yFLMZJ
⬇️ Gear Used To Make this Video
1. Camera: amzn.to/3jTcRVw
2. B Roll Camera: amzn.to/2VcYq45
3. Microphone: amzn.to/2UrGgeA
4. Tripod: amzn.to/3qTaQdg
5. Lighting: amzn.to/3i0hyu7
6. Editing/Upload: amzn.to/2SXw8dg
7. Gorilla Pod: amzn.to/3yBWe4L
8. My Brain Power - / @flyingwrenches13
⬇️Socials
Facebook: / flyingwrenchesauto
Instagram: / flyingwrenchesauto
TikTok: www.tiktok.com/@flyingwrenchesauto
⬇️Business Inquires: maysondunsford@gmail.com
Disclaimer: Links included in this description may be affiliate links. If you purchase a product or service with the links in this description I may receive a small commission. There will be no additional charges to you. Thank you for supporting my channel so that I can continue to provide you my best quality content for free!

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 293

@brianburkett7243 Год назад

As a tech, it doesn't matter what I'm working on. I only use Toyota's FIPG or "The Right Stuff" by permatex (who I think might have copied the Toyota formula.) Both are so good that they will seal well even if the surfaces are somewhat dirty, oily, etc. The Toyota sealer is way expensive and not nearly as readily available, so in recent years, I've primarily used "The Right Stuff" in the small caulking gun compatible size.

@RST563 8 месяцев назад

You're 100% right. the Toyota FIPG is the best. You will have dirty fingers for a week tho!!!!

@bryanspanjer3213 8 дней назад

Once I discovered the right stuff in the early 2000s, that's all I use on anything that I really need to be sealed well. No regrets

@TheMajictech 3 дня назад

Exactly, it works because it’s urethane, not silicone.

@PowerStrokeTechTalkwARod 3 года назад

BRO!!! killller thank you, thats awesome

@FlyingWrenches13 3 года назад

Haha just telling the truth. Thanks man!

@hardway1746 2 года назад

Subbed to both. Awesome videos. Check out my 15 PowerStroke

@robertscott1983 Год назад

@@FlyingWrenches13 does this apply to a 6.2l gas f350

@daviddake6683 2 года назад

Why is it that Ford, or any of the other manufacturers for that matter, do not issue recall's for these obvious mistakes in design and engineering?! Customers pay $90k for a truck and have to put up with this?! Great channel and appreciate the info from you and AROD!! Sad that it is necessary...

@FlyingWrenches13 2 года назад

It’s all a money racket. Thanks man!

@almarkowbender Год назад

Well, who's going to stop them? Definitely not any politicians, and people keep buying them.

@stevensanders7427 Год назад

ummm ...... money

@alexnderjb6705 Год назад

what they said, money, and recalls are also mainly for something that can get you seriously hurt like an air bag recall or seatbelt recall, so if your truck is leaking oil ford's gonna think "well that's not gonna kill you" and theyre not gonna spend the extra money on that kinda recall, companies are only gonna recall something that will put them in a lawsuit

@caseyfrench1806 9 месяцев назад

Because service by far makes more money than sales.

@dwaynecallahan7621 23 дня назад

I have a 2017 F250 with a bad oil leak,most shops in my area don’t guarantee fixing the oil leak. Thanks for your 3 tips.

@hellkitty1014 3 года назад

How in the heck do you have fewer than 6k subs!?! You give amazing advice and info to Ford guys. I'm a Ram guy, but respect your mechanical acumen. #subbed!

@FlyingWrenches13 2 года назад

Thank you!!!

@1911sidearm Год назад

Awesome video, I have a 2017 and looks like they must have went back to the gasket!

@jeremyhedlund7707 Год назад

I have had my 17 F250 6.7 for 11 days. Just found oil leaking from the engine or lower oil pan. Thankfully the truck came with a 100,000 mile warranty or I’d be out a few thousand.

@mattphillips1910 Год назад

What a great channel this is. I have a 2016 450 and it has just developed a leak. A small one. It isn't even dripping on the ground yet. I only knew about it because my dog chased a cat under it and came out with an oil slick on his shoulders. I haven't discovered where it's leaking yet, but now I have a few ideas of where to look. Keep up the good work!

@majestic5555 2 года назад

I'm new to diesels and the 6.7. learning lots about diesels and your videos are great. thanks man.

@FlyingWrenches13 2 года назад

Thank you!!!

@FlyingWrenches13 2 года назад

You work at a dealer?

@majestic5555 2 года назад

@@FlyingWrenches13 No Sir, I drive commercially hauling campers all over the US. I currently have a '19 F250 6.7 Powerstroke. Love it, but starting to look at the 450s!

@PatrickHennelly-uc3mz Год назад

Great video and awesome info!!! 👍👍👍👍👍

@yourdieselspecialists Год назад

I did a video on my channel replacing the lower oil pan on a 2015 Powerstroke. It’s crazy how many of these trucks we work on and you wonder why they did not get it right in the first place! Nice video man!

@codyphillips48 2 года назад

Great idea on the upper pan. I remember PTT filming that RTV video in my driveway 🤣. I agree with PTT that needed to be said. I was told day one at the dealership never use black rtv on diesels. I always had a tube of gray in my gun.

@FlyingWrenches13 2 года назад

Thanks! Haha yeah I think it holds up a lot better!

@spartan6724 2 года назад

Dude, you have a great channel. Can’t believe you don’t have more subscribers.

@FlyingWrenches13 2 года назад

Thank you! Tell RU-vid’s algorithm that hahaha

@bradyrodgers1731 2 года назад

I wish I would have seen your channel a year ago. I made the mistake of trading my perfectly good 2002 F250 7.3L Powerstroke for a new 2016 F350 6.7L Powerstroke. Then last summer it started leaking oil substantially. The local Ford dealer initially diagnosed the issue as a leaking vacuum pump assembly. After teo months of waiting for parts, they made the repair and the day I drove it home, the leak was worse than it had ever been. Oil running everywhere after the 6 mile drive home. Puddles of oil, not just drips. After returning to the dealership, they then said it was the front cover leaking. The two repairs cost me over $4,000 and the truck was five months out of warranty. It only had 65,000 miles on it. Ford would not contribute one single cent to helping with this repair cost. Have been a Ford truck guy since 1973 but this is the last Ford I'll ever own. I appreciate all your excellent advice, wish I would have seen it sooner!

@brockmartin5584 Год назад

Fabulous content! I am a private mechanic and do my share of 6.7L PS maintenance/ repairs.

@robertwoody6968 2 года назад

Very helpful videos! My '17 f250 just recently started leaking oil. Thanks man! Now I have a place to look before dropping it off to the dealer

@FlyingWrenches13 2 года назад

Thank you!

@waynestarnes5462 2 месяца назад

That old 7.3L Silicone is AMAZING Stuff. Best, toughest Silicone made!!!

@72NovaLS-SP 2 года назад

Thanks for the tips Bro. I have a 2015 F550 6.7l that I have a lot of oil coming out of the top engine valley like if it was shooting out of the turbo.

@kevinhopping4991 2 года назад

Just came across your channel. Great videos simple short and to the point! Great work keep them up. Thinking about getting me a 6.7 my self 13 model

@garylong7096 2 года назад

With the education of experience. I recommend. Don’t do it. Stay with gas motor. If you are buy a ford truck.

@steveh7857 Год назад

@@garylong7096 I never buying another diesel. Too many problems and Ford will not correct them.

@jorgenunez6046 7 месяцев назад

I am subscribed to this brother's channel because his expert. And bean doing this for a time and times.

@WaterandWoodsmen 3 года назад

Thanks for another 6.7 video I like my early 12 a little more

@G.I.JeffsWorkbench 2 месяца назад

Great tips. I’ve already replaced the turbo on my 2018 with the new superseded part. CCV filter is next. I’ll take your advice & get the newer all in one part. Fingers crossed I don’t need to replace the upper pan, since i’d have to figure out which kid i’m gonna sell to afford it. Thanks for putting this together.

@singlsrvngfrnd Месяц назад

Just delete the CCV all together. The block off kit is like $50 and comes with a vent hose. Never have another issue guaranteed.

@kenfriday4384 2 года назад

Thanks for the tips,Tips, the 6.7 upper oil pan leaks,I have a 2016 f250 6.7,I have had my pan replace 1 time had it off 4 times,now going for the 5th time,this time now out of my pocket @2260.$,Im just now ordering the 2011 oil pan,going to use the Ta-31 selant.Thanks KF.

@johnfranklin4567 Год назад

You Are Right About using the CORRECT silicone on disel engs

@nobodyhome2318 Год назад

I had leak at the vacuum pump, the bolts backed out. Put a new seal in with some locktite and she's good. I know it's a common problem and I actually saw it on RU-vid, couldn't have been one of PTT AROD'S videos as well. 👍

@averagefordtech9347 3 года назад

I will agree, I think the RTV with high crankcase pressures is asking for trouble. Somebody has said they went back to a gasket with the 2021s? Haven't confirmed with the manual yet.

@FlyingWrenches13 3 года назад

It’s a press style gasket on the 21 upper pans, which I loved when I first seen them. Butttt they siliconed the front cover 🤦🏼‍♂️ it’s like they just want the engine to leak haha

@brandonackerman3339 Год назад

I know this is a older video but my 22 with 33k miles is in the shop with a oil leak. I was changing my oil and found a leak on the engine above the filter. They just confirmed rear main seal leak, no excessive crank case pressure. Was have extremely hard down shift is tow haul from 3-2 and 2-1. After a few times in and they heard me say tow haul then they figured out about a TSB for exactly that. Reprogrammed my TCM and truck shifts way better now. They said it only would affect the tow haul mode but swear the truck shifts better all the way around. Anyway I think that hard shifting is what caused it to leak. When I say hard shifting I mean 20k pound trailer and feels like holy Jesus the transmission just left the conversation!

@johnsmircic6650 8 месяцев назад

Love your videos! You never mention at what mileage intervals (generally) do these oil leaks begin to appear ? Thanks

@michaelabbey6073 2 года назад

I have replaced just as many upper oil pans leaks on 2011 as much as any other year models because the gaskets get rocked hard and leak. When it comes to using silicone for sealing I have always used the 7.3 silicone because it’s just the best.

@FlyingWrenches13 2 года назад

I’ve done some too, but most of the time they have 250k+ miles on them before they start leaking. I most certainly agree on the silicone though. Ta-31 is the way to go.

@TheBeingReal 2 года назад

Thanks. I have this leak issue and will upgrade my 2017.

@iampurehell Год назад

Good video. Very informative

@natey891 3 года назад

Great video! Yeah the new style 2020 CCV box is empty. I took mine apart and looked inside. A neat piece of engineering.

@FlyingWrenches13 3 года назад

Thank you!

@aitkeninvestments9349 Год назад

What’s the part number?

@JusticFreedomFighter Год назад

Great video. Thank you buddy

@Paul-qn5jo Год назад

Enjoyed the video, got yourself a new subscriber :) Where is y'alls shop located at?

@onajehowell Год назад

Very good video thank you

@stewy_604 Год назад

Hate that there's no recall or TSB on this. Thanks for the tip on the 2011 pan, I'm on my 2nd failure (first was at 33,000 kms, now the 2nd at 148,000 kms). Thinking the culprit is the CCV filter? Do you happen to have the PN for the 2011 pan? Would you recommend re-sealing the front cover as well while Ford has the oil pan off?

@Shitboxo 2 года назад

100% agree on the pan! Done a couple of both and the oring gasket is a lot less nerve racking, the oring will go flat eventually but 10-12yrs and not have to worry about it maybe even more!

@FlyingWrenches13 2 года назад

Agreed!

@מאיראסייג-ע7ד Год назад

אלוף מסביר יפה מאוד סרטון הדרכה מעולה

@tprice3450 7 месяцев назад

My problem is not with the upper pan, but I have oil in the valley. I did a CCV delete a couple of years ago. I ran the hose over the top of the master cylinder, down to the frame and back to the rear axel to avoid the stink from the fumes. Well, over time and not tying the hose up properly, it developed a sag acted like a P-trap in a sink. This last winter I acted stupid and idled it excessively in the cold weather. When I tried to get back on the road again, i got about fifteen miles and it looked like i was fogging for mosquitoes. When i pulled over, the tail pipe was coated with and dripping oil. On the way home it stopped smoking. But i found that i had gone through 2.5 quarts of oil. Thats when I discovered the blockage in the CCV bypass hose. I also pulled off the hot and cold side pipes (Pusher) and they were both very oily. That's when I discovered the oil in the valley. I cleaned out everything, topped off the oil and took it for a drive. It's been working fine but im still getting oil in the valley. Im gonna sop up all the oil, degrease it and use some dye to find the problem. My question is, is it possible for oil to get into the valley through where the fuel pump mounts?

@jlweck231978 Год назад

I have the non filter ccv on my 18'. I have 115k on it and no pressure from the oil fill cap. Should I still change the ccv? Is there a different service interval for these as opposed to the filter tyep? Should i change it regardless to prevent an oil leak or keep going and keep checking for pressure? Thanks!

@garygregg2945 Год назад

Good stuff buddy!

@johnnyrizzo8057 2 года назад

Whoa good tip. If someone were to get rid of the ccv, would that hurt the turbo in anyway?

@forrestdemaria 5 месяцев назад

Hey brother I just dropped off my 16’ for y’all to do this on. Since I’m paying for it can you please see about getting a 2011 pan for it? I’ll be happy to pay the up charge If you say it will fix it for good. This is the 4th re seal I’ve had but wanted to try y’all bc I know y’all are the best. I knew about the o ring pan on the earlier trucks but never knew it was possible to retrofit it. Thanks man

@25yearfleettechnician63 2 года назад

New subscriber. Our fleet is mostly Ford ( 6.0/6.4/6.7’s) International ( DT’s & Cummins ) and the 1st 6.7 out of 10 plus trucks Is leaking at front cover/upper pan. 35k. Full synthetic oil all around. Mostly the 6.7 has been good to us. Great video. May ask to have the 11 upper pan installed at our cost during warranty repair. Think they will oblige at our cost swapping to a pan with a seal ? Thanks

@michaelgoheen1666 6 дней назад

2016 350 constantly hot oil smell. Had he upper and lower pan changed 2 weeks later same thing !

@floydwilliams3321 Год назад

That was good! Information

@JungleTreeGator 2 года назад

Thanks for the information! Glad I found you, bro! Do you have the part number for the CCV upgrade? Will it fit in my 2014 F350 ?

@FlyingWrenches13 2 года назад

Thanks! 14 model already has one without a filter.

@donaldkraft7371 2 года назад

You might consider a zoom with ARod on his weekly podcast, more experience the better for all who follow. Great vid

@FlyingWrenches13 2 года назад

Thank you! I was on there a few months ago. Will probably be back in the future.

@coreythurman9116 Год назад

Thanks for the information on the 6.7 I have a 2015 6.7 powerstroke will the new style crank case ventilation box fit on my 2015 6.7 F250 Thanks and I subscribed to your channel keep doing what you're doing

@MrVic820 2 года назад

Subscribed. Great content

@carlportland 6 месяцев назад

be looking for that - thank's

@garylong7096 2 года назад

Thanks Fly. But that one problem I never had. Oil leaks. My problems We’re, 2011, 6.7 . Needed exhaust cooler replacement cost about 10,000.00 to fix. And my 2013, 6.7. Spun its main bearings at 28,000 miles. Ford wanted 25,000.00 dollars, for a generation 3, 6.7. So l traded both in for a 2022 f350 7.1, gas motor. And got a 2022 International CV, for my dump truck.

@1231kyle Год назад

Quick question I’m new to diesels and I have a new 22 6.7 ps and I was curious where the new box is located and is there any maintenance that needs to be done on it?

@michaelmitchell8869 2 года назад

Thanks for the content

@GuretoSefirosu 2 года назад

My 2017 has never leaked a drop of anything. All original, over 125k on it, and the only thing it ever drops is water when the AC is on. In fact, my only fear is the CP4 failing before I can install the disaster prevention kit. With an EGR delete, I expect the engine to be solid for a million miles or more. If it does start leaking I will keep this tip in mind though, thanks.

@AndrewKidd14145 2 года назад

You seriously think that your engine isn’t supposed to leak ever? Seals leak eventually between 100-200k and that’s how it is on all cars doesn’t matter.

@GuretoSefirosu 2 года назад

@@AndrewKidd14145 Ah, somebody who doesn't do maintenance. I have had Harley's go over 200k without seal failure (Evo engines). Had a Dakota or two with no leaks over 150k. Had two 1995 Rangers with no leaks. One was a 2.3L I4, one was a 3.0 V6. The I4 had 363k wheb a guy hit and flipped me (rolled twice). The other had 312k when a 700cc quad fell out of a truck and hit it so hard it bent a frame rail. So yes, you CAN prevent leaks. The bigger thing here is that nowhere did I say an engine never leaks or that it won't given enough miles. You inferred that on your own.

@AndrewKidd14145 2 года назад

@@GuretoSefirosu I’m a tech, rubber gaskets sweat what you do doesn’t matter. It will leak at the mileages I say. Data from millions of other cars say so. You got lucky on those cars and got the good ones.

@GuretoSefirosu 2 года назад

@@AndrewKidd14145 The only vehicle I own that has EVER leaked, is my Harley. This is due to a bad design. They use a metal ball that, when oil pressure stops, seats and is supposed to prevent the flow of oil from the oil tank (up by the rear seat) into the crankcase. The thing is, if ANYTHING gets between the ball and seat, the crankcase fills and it starts leaking opil through the crankcase breather. I have thought about putting a 90deg "off" valve in the hose between the tank and crankcase, but it terrifies me to think I'd forget to open it and ride off... Also, I just checked my 6.7 above and below. No wet spots or anything. 135k. Going in for the oil/filter change soon. Maybe I am lucky, but I go way beyond filters and oil. I do engine and cabin air, spark plugs when I had gas engines, transfer case, transmission, differential fluids, brake fluid, coolant (both of them on this truck) at regular intervals. I also try to clean the engine and panels that cover it. Looks good and prevents excess heat. Oh, and I run the HECK out of my trucks. I have been 5,000mi in the past two months! Letting them sit is what I believe damages them more.

@AndrewKidd14145 2 года назад

@@GuretoSefirosu you’re a good owner!

@pcyingling 2 года назад

Hello Mayson, I have a 2019 F450 and I just had to have the Turbo replaced at 48,000 miles, The Tec mentioned that he saw some oil in the turbo housing ( I believe it was on the exhaust side) could this have been caused by a clogged crankcase filter?? Thanks Paul

@Kevinskywest1 Год назад

Thanks!

@FlyingWrenches13 Год назад

Thanks for the comment and support!! Hope you had a merry Christmas

@RST563 8 месяцев назад

Thank you

@TonyLasagna 10 месяцев назад

Can’t go wrong with a rod. He’s been working on my truck for years now. 200k and going strong on my 6.7. Having him put a dCR on my truck in January! When my pan starts leaking (it’s a 14) probably going to take this advice and try to find the 11 pan.

@deucenine4life813 9 месяцев назад

Where is Aarod based out of.?

@TonyLasagna 9 месяцев назад

@@deucenine4life813arod is in detroit michigan area. he’s worth the drive, especially for a big job. if you want an intro lmk

@lecatlin 9 месяцев назад

Is the CCV box / baffle change out doable without lifting the cab? My ‘17 6.7 leaks and I’m looking to get the pan done- thanks for these tips. At the same time I want to convert to the baffle - I saw your previous video and when I found the leak I changed the filter… still leaks. :(

@fzebaseball9 Год назад

So I just bought a new ccv box and hose today. I broke my old hose and have no idea if the box has ever been replaced. My question to you is, with these new updated boxes, how often do we change service/change them?

@NutsandBoltswithTone 3 года назад

Great video

@FlyingWrenches13 3 года назад

Thank you!

@danielhoffmann1325 Месяц назад

What are your thoughts on Right Stuff RTV?

@anthonybrown1251 4 месяца назад

Where can I get one of those metal prep wipes? Do you have a part number?

@danieloberholzer4305 3 года назад

Thanks for sharing 👍 😊

@FlyingWrenches13 3 года назад

Thank you!

@joshuakazfields4374 14 дней назад

Why dose my 2012 have the baffle not the filter box if it’s the old version. I’ve owned the truck for 9 years. And how could I tell if I have the o ring pan for sure. What are the cut off dates for the mid years.

@wadetharp348 2 года назад

Help! You mentioned in one of your previous oil leak videos that the 2011 - 2016 powerstrokes (I have a 2015 F350 V8 6.7L 4WD DRW) had a crankcase with no filter but that it could still pressure up? Was hoping this video would talk about that a little bit. I have small oil leaks, but like you said, I don't want to fix the leaks without first determining any issues regarding the crankcase. Can you write any recommendations regarding how I can determine if the crank case is the issue in my example and if it is, do I just replace it (I think i remember you saying it was sealed or something)? Any assistance is appreciated.

@FlyingWrenches13 2 года назад

You can check your crankcase pressure by pulling the oil cap with the engine running. It shouldn’t have much pressure. A lot of the time the separator will become swole on the top when it becomes clogged.

@juliansullivan4077 Год назад

Mayson, I have watched all your videos having to do with oil leaks on the 6.7l. Very knowledgeable. I was wondering if you offer advice/information for a fee. I have a 2017 f350 6.7 dually that i discovered an oil leak on two weeks ago while i was going to change the oil. I watched your video and immediately changed my CC filter. You were absolutely right… CLOGGED. My issue is I’m still spotting oil on the bottom of my driver side head afterwards. I know you said that if the filter clogged pressure will cause a leak elsewhere. I’m very picky about my truck, i am hard headed about taking it to a dealer for service. I do everything myself including mounting tires, filters, oil change, etc. i would like to chat with you about this issue I’m having because honestly it’s giving me sleepless nights because i do not want my motor taken apart. Please reply to my email with a cashapp/Zelle and if you have a free minute and you could receive a phone call i would greatly appreciate it.

@carllennen3520 Год назад

Did you ever figure out what was causing the leak on the drivers side head? I have the same condition, mines a 2016. Its not leaking real bad or anything, but its "wet". The passenger side is nice and dry. Its been like that a couple years now. Never had oil level issues or anything, just the bottom of that head has a thin coating of oil, that makes it look wet.

@DavidBrown-hc1rb 2 года назад

Love my powerstoke but seriously considering getting rid if it because of this isse. 46k miles and it is in the shop right now for another warrantied upper oil pan. On top of that the dealer never wants to repair it because they say its not leaking bad enough. Makes you feel great to spend 65k on a truck and the dealer tell you its “weeping” and they only fix “leaks”!!

@FlyingWrenches13 2 года назад

Yeah I get that. Most dealers are doing that because there are sooo many of them leaking right now it’s hard to keep up. Once resealed properly though it shouldn’t leak again!

@powerstroke6.7 3 месяца назад

Does that upgraded ccv box need to be replaced at some point or not?

@jayhall2200 2 года назад

Is the early ccv box prior to 17 without filter the same as the 20 box without the filter? Or better baffles in the late one?

@bajamedic 2 месяца назад

My 2017 got lemon lawed in 2021 because of 3 failed attempts to repair. Last time I picked it up and was merging on the freeway my drive shaft came apart at the trans, damn near killed me.

@DieselTechMaintenance 11 месяцев назад

hey Thanks for all the tips I have a question On a 2011 6.7 I have a oil leak that look like its on the top rear of the engine but I can't see were it is any Idea

@vinnybobby3450 2 года назад

I just did my 2013 6.7 upper pan, but I don't have oil pressure. Confirmed no pressure sensor is fine, no oil movement into the filter. Was there a priming procedure I missed? I didn't have the correct engine hoist brackets, so I just rigged up something to hold it from the front case. Could that have damaged the oil pump?

@syedullah613 2 года назад

Thanks for the Video! I’m going to Finally do upper oil pan on my 6.7 2014. Which has 200k. My question is Where exactly am I using silicone T-31? Am I using it all around the perimeter on top of the pressed In gasket or specific spots. Yes I’m planning to trash this 2014 oil pan and follow your advice and buy 2011 with pressed gasket. Do u have another video on this in detail? Much Thanks 🙏🏾

@FlyingWrenches13 2 года назад

Only need to apply silicone to the places where more than 2 pieces of metal seal. Where the front cover and rear cover meet the block.

@audenluna6028 2 месяца назад

I have a 2021 f250 super duty diesel are you saying the 2011 will fit the 2021?

@SM-ut6vb 3 года назад

Thanks for the tip on using the 2011 oil pan part. My Jan./2019 build has the non serviceable CCV box. Is there still a recommended replacement interval for this style CCV box? Have you found them to still clog up around a certain mileage?

@FlyingWrenches13 3 года назад

I haven’t seen any without the filter clog. Once you have the updated box, you shouldn’t have to do anything else. That box will last the life of the vehicle.

@claytonlehman4628 2 года назад

@@FlyingWrenches13 Trying to clear up the mud in my mind: if the CCV box does not have bolts to take the box apart, this is the non-filter version, right? Mine is a 2017 build without bolts on the CCV box.

@FlyingWrenches13 2 года назад

@@claytonlehman4628 if it doesn’t have bolts then it is the non serviceable one.

@claytonlehman4628 2 года назад

@@FlyingWrenches13 thank you!

@jeremys-i7o Год назад

Has anyone tried loctite 511 anaerobic flange sealant on the later pans without the oring seal? It seems to be a good alternative as excess doesn't harden eliminating the possibility of clogged oil passages or pump screens.

@seanryan4361 8 месяцев назад

Do you have part numbers and do you have to remove the engine to do an oil pan replacement?

@robo5877 7 месяцев назад

Big thing here is if you want to avoid big oil leak is to check your crankcase oil separator. Easily done by removing your oil filler cap while engine is idling. If you have pressure (lots of vapor coming out ) and the cap comes up without you pulling it off, then its time to replace it! .....been Ford diesel tech since 1987... need chiropractor!!

@Rockwooddiesel 4 месяца назад

The 2011 pans are back ordered with no eta , have they stopped making them now ? Having trouble sourcing one .. any suggestions?

@Doc.Holiday Год назад

216,000 miles on my 2011 f250. Doesn’t leak or use a drop of oil between changes. I don’t like the plastic drain plug but change to a new one with every oil change. Does the new style CCV Box need changing every 50k or is it permanent?

@armedprophet3321 2 года назад

So does the new crankcase “filter” need to be replaced every so often or is it a lifetime thing that never clogs or wears out. I was thinking about a ccv reroute because of the filters getting clogged but maybe if I just switch boxes I won’t have to. What are your thoughts about a ccv reroute. Does it hurt the turbo or engine in anyway ?

@FlyingWrenches13 2 года назад

Ccv reroute is the way to go honestly but swapping out the box for the one without a filter will keep you from having to worry about it also.

@Rogerharp1 Год назад

I have the original oil separator on my 2015 6.7. I don't have any pressure in system when opening oil cap but I do have a front or pan leak. Do I need to replace my original oil separator and if so can I replace it with the newer one. My dealer said my original doesn't have a filter in it either.

@seanchildress3137 2 года назад

I have a 2013 6.7 F250, I had a leaking vacuum pump. Had the pump replaced, leak stopped and my brakes worked better.

@gregpritchett1809 2 года назад

I would love to get the new CCV box that doesn't need filter replacement. I have a 2017 f250 6.7 powerstroke. Do you have the part number for the new box or a specific name for the new box?

@FlyingWrenches13 2 года назад

FC3Z-6A785-F

@aitkeninvestments9349 Год назад

I have a 2017 F350 DRW. I believe the 2020 upgraded non-filter oil separator part number is PC3Z6A785A. Is this correct?

@mikz86ta1 2 года назад

Did Ford do a update for the old trucks for the CV filter? I looked and our 2016 doesn't have bolts. Looks like a sealed unit. But we got the truck 2020 with 21k and we didn't have the dealer do anything to it. Unless the prior owner did but at 21k unless he had an issue or one of the service trips they just did it for him. Idk

@RockyAlajoki Год назад

Quick question, i saw your video about the CCV filter and tried to change mine. Its a 2017 but it looks like it has a sealed filter, you said it started in 2019. Is there any way a 2017 could have wound up with one of the sealed units?

@sheemio2x 11 месяцев назад

Question if I need to get my truck diagnosed can a take it to ford and they diagnose every oil doing the diagnostics

@MarkJuarez-p2g Год назад

When you do a delete on a 19’F-350 is it good to delete the crankcase filter?

@mobkinq 11 месяцев назад

I have a 2012 6.7 powerstroke that’s mysteriously leaking oil. Doesn’t become noticeable or drops oil level. But just enough to notice. Already replaced CCV and did oil change. Cleaned the bottom with engine degreaser see if it’s still happening. Seems like it is. Only on long drives tho

@precisionfilms3777 2 года назад

I'm looking at purchasing a 6.7 2017 f550 dump 133k. It's leaking. If you replace the ccv will this stop the leak or do you have to reseal the front cover and oil pan? Or will it just leak alot slower?

@FlyingWrenches13 2 года назад

If the crankcase filter is clogged, changing that will drastically slow the leak. It usually won’t completely stop. I’ve had several customers out of warranty that I replaced the crankcase filter and they never came back. I’m sure it still leaks, just not that noticeable.

@tommyjamison6151 Год назад

Might be a long shot but do you know of a repetitible mechanic in the Texarkana area that? Could fix my 20? 16? F250 upper oil Pan leak?

@bigtex4563 8 месяцев назад

does the oil pan replacement trick work on a 2014 f250 powerstroke turbo diesel

@je7758 Год назад

My 2016 f250 was dripping oil from the valley is been 5 days and is not oil around, and another thing was the dealer overfilled with oil

@0116Lori 5 месяцев назад

bad taste in the mouth doesn't come from the leaks. Bad taste in the mouth comes from not making stuff to prevent it and making it in a way that is so complicated and expensive to fix it. Leaking seam? 10 dollars for new silicone 2500 dollars to get to it and put it back together.

@mikeolszewski5208 11 месяцев назад

wow so happy i have early 2012

@mikefortunato9800 Год назад

Have the addressed this on the newer model 6.7’s?

@El_Rico_Panini Год назад

Do you see any common issues with the ccv delete? I currently have the updated box but in order to install a full piping kit the ccv needs to be gone since the return line will no longer exist.