6L Ultrasonic Cleaner Ultra Sonic Bath UK review 

Exactly what you need to see when still on the fence over a ultrasonic cleaner 👍 great to see real world before and Afters.

Great I'm going to get one! Excellent worthwhile video, very clear, well done! (Retired CarAndClassic Founder)

Brilliant video thanks for sharing, informative & gives a good idea of the size of things you can fit in the 3L tank cheers 👍

7:27 The ultrasonic transducers actually produce a fair amount of heat in these things.

that "behold" had me:))

you need to put way less water and mesure product precisly and put already hot water and work on 30min cycle to have better result :)

I use a steel brush, brass brush, goop, 600 wet dry. And metal polish Also rim cleanser from meguires and a soft brush.

Just ordered one of these myself for a vlog project, thx for the fill info I was wondering bout the actual amount with that fill line. Other vid I saw showed the heat would rise past the set temp as well.

Turn the temp to max and use vinegar

Love the way you speak. Nice use of the word "skanky" hahaha

5:50 I've not tried videoing mine just yet, but they seem to come out really loud on camera for some reason.

It's helpful

Excelente vídeo e explicações. Obrigado por compartilhar seus conhecimentos. Parabéns pelo seu trabalho.

the transducers run at about 1000volt,if the tank isnt grounded they will bite,also they hold charge like a capacitor!

I'm convinced 🙂

Why are these things not simply listed with the exact litres they are? I mean litres aren't exactly a variable unit of measure open to interpretation across the world :)

well i think your going about the cleaning of stuff in totally the wrong way.. before putting a part in this tank you need t ograb a wire brush and get off as much crap as possible. the whole idea of the ultra sonic is to get into parts you cannot normally get to easy... and for cleaning pistons you need to put these in gunk for about 2 hours and then brush them off. once as clean as you can get them put them into this tank on full heat with some fairey liquid for 20- 30 minutes.. dont put mega greasy crap in there with a ton of carbon on it that,s not the idea of these machines.. these are more for the delicate stuff like carbs where you cant get into and for final cleaning up of things like pistons and rods....

You answered my quest at the end it is a rover V8! Pretty bad when you can look a piston and know where it comes from......

yeah next time try to pure all the solven't in, then keep it for day or two for air to run out the solven't see if that will work better

You had to degas water for better result. Atleast this is what they say about the liquid

Great video. Thanks.

We love your video's❤

It's actually way less efficient than what I thought it would be...

Is it still working? Did you have any issues with the heater? Any noteworthy issues with this device? Thx!

Nicely done, how do I get some of your degreaser?

Hi ya. Could break calipers clean up in these to get all the gunk from the seal seats

I bought the same one. Pretty happy except it only seems to heat whilst in ultrasonic mode. I thought you could preheat tgis style. Does your one preheat? Cheers

Soda blaster for cleaning

I have a similar ultra-sonic cleaner. I find the cleaning power, as you have shown here, very minimal. They are the most OVERRATED cleaning devices ever in my opinion. After 40 mins the dirt on engine parts has only SLIGHTLY loosened but I end up using wire brushes with paraffin then finish with Brillo pads to get the thing really clean...NO, my cleaner IS working normally ...I have done Aluminium shredding tests and it shows the thing is working strongly but as said ultrasonic cleaning is only of any use if the item is just slightly dirty...most engine parts are very dirty, and the cleaners fail to clean them much even after a very extended session. The only really effective cleaning system is Aqua/vapour blasting or bead blasting on surfaces that are not as delicate.

Sounds like a space craft from flash Gordon!!!!! 😂

when turned on sounds like flash gordons space ship

Is this still working? What's your thoughts after 4 years?

Instead of salt next time try sand

I wondered if it will clean rusty bike parts like rusty chain etc also oily greasy parts

Sorry dude but that's not how you use snd ultrasonic. Ok, class is in session, lol Some of my fav solutions to use are ; Vinegar and water to deuche your parts in, My prefered is simple green and water, There are many other combos like amonia and water, (but amonia blackens carbs) experiment try commercial mixes, make your own, find out what works best on the material your cleaning. Next you need to break down the parts, you should've pressed the wrist pin out. You want solid parts, so they can absorb the sound waves and dislodge the dirt, the wrist pins act like shock absorbers, no good.. Avoid if possible Also you don't need to fill the tank if you have a few small parts, you can just get a bourbon or rocks GLASS , MADE FROM GLASS, not a plastic glass, fill the glass with solution and set it on the dry bottom, the occilators are in the bottom and the sonic waves will transfer into the glass. Also a ultrasonic will not clean soft material parts, like things made of rubber, the rubber absorbs the sound waves and does nothing. Ultra sonics are primarily used for microscopic cleaning therefore heavy gunk interpheres with their operation by absorbing the sound waves, therefore as much as possible the heavy gunk should be knocked off first Lastly heaters are a waste of money, ultrasonics create their own heat as they work, the longer they run, the hotter they get, think retarded microwave.. I've been using these from L&R (b4 someone asks, mine is a L&R Quantrex 210 no heat] for a long time for oxygen cleaning diving regulators, cleaning carbs and other parts and jewelery, they work great when you use them correctly.. Hope this help some of you guys who've never used one before.

Do you have to fill it to capacity to use the heater?

So ethier more solution or longer?? I guess that you should have got the worst of it off first Ps I don't own one, yet

What brand is this cleaner?

Try white vinegar

An you put oil in that tank

you dont need an Ultrasonic Cleaner to clean pistons, just soak it in chemicals

Probably be better of putting piston in 2lit Coca Cola bath

you have wrong HZ this is 40hz thats not for carparts , carparts ect nead 28 hz

Altra sonic not efisen to clean,so bad

Temp to low..

cleaning is not successful

For such a greasy parts, fill it with diesel.

dont film with a camera like that. disgusting