7 Mistakes To Avoid When Making Ikonart Stencils

Подписаться 8 тыс.

Просмотров 3,2 тыс.

50% 1

Let's talk about the 7 most common mistakes I see people making when creating their Ikonart stencils. Are you guilty of any of these? Still having issues making your stencils? Let us know in the comments if you have any questions, or join our Ikonart Crafters Group on Facebook for a more interactive experience. xx Fawn.
.
.
WATCH PART 2
7 Common Mistakes When Using Ikonart Stencils
• 7 Common Mistakes When...
.
.
ON THE BLOG (read/print these tips):
ikonartstencil.com/blog/7-mis...
.
.
FREE LAKE LIFE SVG DESIGN:
ikonartstencil.com/lake-life-...
.
.
WATCH ALL OUR VECTR TUTORIALS:
• Vectr Playlist - Artwo...
.
.
IKONART ARTWORK FAQ:
ikonartstencil.com/artwork-faq/
.
SIGN UP FOR YOUR FREE VECTR ACCOUNT:
vectr.com/
.
DOWNLOAD FREE SVGS:
ikonartstencil.com/artwork/
.
IKONART DESIGN SHOP ON SO FONTSY:
ikonartstencil.com/so-fontsy-...
.
.
.
If you have any additional questions about Ikonart or any specific artwork tutorial requests, please let us know in the comments. Happy crafting!
.
More Video Tutorials:
Beginners Guide to Ikonart: • Beginners Guide to Mak...
How To Make Ikonart Stencils: • How To Make A Custom R...
Print Settings for High Density Printing: • Print Settings for Hig...
Washout Ikonart Stencil in Real Time: • Wash Out in REAL Time ...
.
Shop Ikonart:
ikonartstencil.com/shop
.
Shop Amazon Recommended Products:
www.amazon.com/shop/ikonartst...
.
Join the Ikonart Family in the Ikonart Crafters Group on Facebook:
/ ikonartcrafters
.
Follow Ikonart:
Facebook: @ikonartstencil
Instagram: @ikonartstencil
RU-vid: Ikonart Stencil
TikTok: @ikonartstencil
.

Хобби

Опубликовано:

11 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@becomingdryork2919 Год назад

Thanks- learned some new tips

@ikonartstencil Год назад

If you have any questions, just let us know ☺️

@3PairDesigns 7 месяцев назад

Good video, but in nearly all of the Ikonart videos, no one talks about the carrier sheet. I have successfully done my printing, exposed properly, etc., but I leave the carrier sheet ON while washing out. The stencil looks good However, is the carrier sheet supposed to be removed for the post exposure? Doesn't all of the emulsion stick to the carrier sheet? That is the one piece that is confusing to me. I don't know if I am supposed to dry it with the carrier sheet? Do I dry and post expose with the carrier sheet? Thank you, I am enjoying my kit. I am having a challenge printing onto glass, but I feel that might not be the fault of the stencil, not sure.

@ikonartstencil 7 месяцев назад

Yes, leave the carrier sheet on when drying and post-exposing. You don’t take off the clear carrier sheet until you go to use the stencil.

@ladadance5458 9 месяцев назад

Hello. Great tips! My question: is it possible to use this kind stencils on plastic round surfaces?

@ikonartstencil 8 месяцев назад

The stencils can be used on almost any surface, it’s more about finding an ink/paint that will suit your needs. You may need to seal it if you’re using on plastic. I haven’t found anything that is 100% permanent.

@Thebaroquebaker Год назад

Great info. Is there any chance that in the future, the film could be white or clear instead of blue? It would help for cookies. Thanks!

@ikonartstencil Год назад

I will check with our R&D team ☺️

@smickelson66 5 месяцев назад

Why does my blue stencil have no sticky mess to it? Am I washing out to long?

@ikonartstencil 4 месяца назад

The blue stencils are meant for glass, ceramic, chalkboards, and other smooth surfaces. It's a very light adhesive that does not feel sticky to the touch. There are some tips for increasing the adhesive on the back of the Quick Start Guide.

@dlchadwick1125 10 месяцев назад

I have a rather specific question. I have purchased a few svgs and when I download them they show with a Microsoft Edge icon. They upload into my Vector workspace fine and look like a vector image, but when I click to make sure they are 100% black, the only option I have is opacity. Am I doing something wrong, or can I change something in Vectr?

@ikonartstencil 10 месяцев назад

Try ungrouping first, then select the individual pieces to change the color

@anthonysturrup8187 9 месяцев назад

I noticed that used a screen for washing out rather than the board. Is there a difference?

@ikonartstencil 8 месяцев назад

I have a teeny tiny sink, so the screen allows the overspray to go into the sink rather than bounce back at me 👍🏼

@rebekahgossman4714 10 месяцев назад

What dryer did you use in this?

@ikonartstencil 10 месяцев назад

We use a commercial film dryer, but you can use a food dehydrator, a fan, or just let them air dry.

@bettymaloof8342 Год назад

Why do my stencils never harden to the point of not sticking to one another? I post expose and it still doesn't harden.

@ikonartstencil 11 месяцев назад

Hello Betty. Sounds like something is off in your process or you are working in very high humidity. Please contact our customer service so we can help troubleshoot! ikonartstencil.com/contact/