7 Must-Have Table Saw Upgrades

Подписаться 867 тыс.

Просмотров 275 тыс.

50% 1

Watch our newest video: "A Fancy Dead Blow Hammer, a Back-Saving Quick Lift, and a Bargain Router Plane | Tools Unleashed 02 "
• A Fancy Dead Blow Hamm... -~-
(Disclaimer: None of these products were sent to me for free. Everything was purchased with my own money and nothing included in this list is a paid promotion)
Even the best table saw can do with a few upgrades. Not just to improve functionality, but also performance and safety. When I bought my new table saw, I decided it would be a good opportunity to document the upgrades in hopes that you might also find them useful.
Stuff shown in the video:
For the aluminum extrusion:
+ 48” Aluminum Extrusion - amzn.to/35tNPHy
+ 1/4-20 Oval Nuts - amzn.to/3sHnq1D
+ 3/8” Socket Cap Bolts - amzn.to/3j92qLN
(It appears the ones I purchases are now sold out. Try these instead: amzn.to/3rurdyq Note that what you're looking for are 1/4-20 threads and a 3/8" length)
To attach sacrificial fences:
+ 1/4-20 Oval Nuts - amzn.to/3sHnq1D
+ 3/4″ Flat Head Cap Screws - amzn.to/3K7ABiN
+ Accessory basket - amzn.to/3LJs1XX
+ Hidden Drawer 3D Print File - www.printables.com/model/1944...
Zero Clearance Inserts:
+ Colliflower Zero Clearance Plate - www.colliflower-zci.com/store...
+ 4-Pack of Replaceable Inserts - www.colliflower-zci.com/store...
+ 4-Pack of Dado Inserts - www.colliflower-zci.com/store...
Stock Guides:
+ Board Buddies (a less expensive alternative to Jessem) - amzn.to/37leLtR
+ Board Buddy Track - amzn.to/3rtX0j7
+ Jessem Clear-Cut TS Stock Guides (track included) - amzn.to/3M5TcMN
Join this channel to get access to perks:
/ @woodwhisperer
Check out our new short-form videos on Facebook! / thewoodwhisperer
For more information, free plans, and helpful links:
SUBSCRIBE!
ru-vid.com_c...
Take a woodworking class online with The Wood Whisperer
thewoodwhispererguild.com
SUPPORT US ON PATREON!
/ woodwhisperer
PRODUCTS RECOMMENDED BY MARC
US - www.amazon.com/shop/thewoodwh...
Canada - www.amazon.ca/shop/thewoodwhi...
UK - www.amazon.co.uk/shop/thewood...
CHECK OUT OUR BBQ CHANNEL
/ twwbbq
WOOD WHISPERER en Español
/ wood whisperer en español
CHECK OUT OUR SHOP TOURS
www.thewoodwhisperer.com/shop-...
GET INSPIRED BY OUR VIEWER PROJECT LIBRARY
www.thewoodwhisperer.com/viewe...
DOWNLOAD OUR FREE APP
iOS: bit.ly/177u4An
Follow me on:
TWITTER - / woodwhisperer
FACEBOOK - / thewoodwhisperer
INSTAGRAM - / woodwhisperer
Pinterest: / woodwhisperer

Хобби

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 287

@Exodus5K 2 года назад

Marc, I don't think the woodworking community appreciates you enough. Thanks for teaching us over all these years.

@lourias Год назад

I appreciate his work. Why? No blaring metal music. Great narrating voice. Great ideas!

@stevennachlas9596 Год назад

Totally agree. Marc still has one of the best WW channels on RU-vid.

@Todjcam 7 месяцев назад

😮🍌

@noconz0727 2 года назад

9:15 I like how you showed the process of installing the track for the guides but then your final shot shows them attached to your 80/20 fence like I would have done it

@innocuous_name7212 2 года назад

This one of my favorite videos. My grandfather had his wood shop setup and customized to perfection. He passed away before I was old enough to absorb and appreciate everything he had done. This video not only gave me ideas but also took me back to his shop. Than you, sir.

@petenelson8136 11 месяцев назад

Buying a Saw Stop for my new shop in my new house, and went searching for inserts for the saw. Found this site (for the 2nd time) and this time saved it to my shop ideas play list. Love what you did for the dust extraction system and the upgrades you made to the fence. My kids bought me a Jessem Clear-Cut TS Stock Guide for my saw and setting it up with the rail on the fence is an awesome idea, something I'm sure I'll be incorporating into my saw. Thanks again for all you do for the woodworking community.

@HelloAnthony 2 года назад

I installed the aluminum extrusion on my fence today. I used the hardware recommended by Mark in the description. At 4:10 when he says "the bolts just barely grab the metal around the keyhole slot" he wasn't kidding. Because of this -- combined with the difficulty of tightening the screws with a ball-head hex key -- I opted to add some washers to keep the screws from slipping out of the keyhole. A dowel with a small square of double-sided tape at the end helps feed the screws into the holes from inside the fence. Next up, I'll be making my very own Cremona.

@miketaylor4597 11 месяцев назад

Thanks. THe washer and dowel trick would have saved me 5 hours of frustration had I read your comment 5 hours ago!

@musamor75 2 года назад

Yet another thumbs up video. No time wasting here. Thanks for sharing your knowledge and experience.

@xof-woodworkinghobbyist 2 года назад

Great ideas, especially the extrusion fence... Thanks a lot for the advice.

@philackerly3174 2 года назад

Thank you . Just assembled my PCS today and looking forward to many years of use and incorporating some of your ideas.

@jeffreysmith5018 2 года назад

Great stuff! I have an almost identical dust collection configuration on my saw stop - works very well.

@johnm7469 2 года назад

Great stuff. I am grateful for your Off Kick Switch also. It saved my butt a couple of times. Also extra style point for black zip ties.

@paulcipriano7444 2 года назад

Definitely going to add All of these Awesome tips to dress up my SawStop. Thank you as Always Marc!

@redneckdoc1991 2 года назад

I have had the Jessum accessory for a couple of years now and I did the attach to some 3/4 inch Baltic Birch and use 2 mag switches and it works perfectly. I am going to switch to the aluminum extrusion fence so I can add the sacrificial fences and other accessories you showed and I have a shop vac I'm not using that much and will add that to my over arm suction. thanks for the tips!

@CarbonHill 2 года назад

Thanks so much, I was having major heartburn about paying so much for dust collection but this solution is perfect and cost effective.

@g.fortin3228 2 года назад

Awesome. I did very similar thing last year, only welded up a bracket and box tubing. Yours looks just as good ! I used a section of straight shop vac extension tube to a hose. Love the material you picked it's sturdy. Love the U-bolt idea. I am using a velcro strap to park it. AND ...I need to use your extrusion idea !

@petenelson8136 2 года назад

Marc, thanks for showing us just how much easier it is to use a tool when you take the time to set it up with cool stuff.

@j.leavenworth7006 Год назад

Great suggestions once again Marc! Almost done with my Roubo! Love my Sawstop as well...going to try some of these ideas.

@LarryTait1 Год назад

Those upgrades to the saw stop are brilliant. I’ve often had issues with feather boards for example. I like the dust collector DIY. I’m using 2” black ABS for mine and only 2’ of corrugated tube at either end of the long skinny ABS “U” to connect to the guard and for the hookup to the 4” port

@kevinstenger4334 Год назад

I finally splurged on the Jess Em stock guides a couple of years ago and they are fantastic! I find that I get more accurate cuts, especially when cutting plywood shelves and panels that need to be truly square.

@mattelias721 2 года назад

Marc, love your style and humor (squeaky toy sound!). Of all these great add-ons, what really excited me was... the organizer thing you added to the saw's wood extension side. I'm doing this to stop looking there and saying, "Oh, FFS..." I will paint it black.

@williamellis8993 2 года назад

Great tips, Marc. I especially like the Cremona reference. I still have my board buddies that I use whenever I'm ripping. Bill

@TheWoodLab 2 года назад

Sweet Marc! Will definitely check these upgrades out.

@robbyflair3552 2 года назад

Great upgrades and info as usual, thanks for doing these Marc!

@donalddolan7709 2 года назад

Thank you for the instructions on the extrusion face... this is the type thing that I'm always terrified of figuring out on my own as I'm always afraid I"ll mess it up and have to buy the whole thing over again!

@israelcharo1563 2 года назад

Great video Marc, always great to see clever ways to optimize the table saw, and even better when someone presents a detailed way to do it! I have the ICS model, and also experimented with ways to improve the table top dust collection. In my experience, connecting a Festool CT26 directly to the port on the blade guard did not significantly improve dust collection as compared to the SS overarm thing...though I did change the "Y" connection at the saws 4 inch port so the airflow from the 2 inch hose was now towards the DC (Oneida V3000)... I don't have an air flow meter, so it may well be that the CT26 did provides more suction, but it did not result in enough of an improvement for me to dedicate it to the saw. Also, did I see some "dots" in the background for the "Origin" CNC machine??? If you review that, please address how it can be used (if it indeed can...) without first mastering a CAD program.. Thanks again for the video!

@brokenhill8590 2 года назад

Great video and suggestions ... i have the Jessem guide, going to add the others as it makes a lots of sense, thanks for sharing productive tips.

@Devin_Perkins 2 года назад

Great idea with the strut Marc! Weird seeing it not made out of wood, but totally makes sense.

@briannelson4122 2 года назад

I love the Jessum guides, have them on my old saw (no riving knife) and it is a game changer in my instance.

@Saw-IT Год назад

Some great ideas to try with my new Sawstop, i particularity like the overhead pipe setup.

@claudeelliott3993 2 года назад

Interesting video! Like a lot of hobby woodworkers, I find the very desirable Woodpecker attachments, gadgets , etc. priced out of common sense range but you find ways to bypass the originals and save money AND make them work!! Appreciate your ingenuity. Keep it up!!

@patrickbink4617 2 года назад

Great suggestions Marc. I quite like your metal extrusion fence face. All of them are good. I do find my dust collection really sucks (in the wrong way) when using the zero clearance plate. My Delta doesn't have an overhead port of any sort so I have tried drilling various holes in the plate to give room for air and dust. Sorta kinda works. I love your channel (and Matt's).

@bobbg9041 Год назад

Cover any holes. Like that big gapping hole at the tilt channel also a lot depends on your dust collection system and its cfm ratings and type of filter it uses.

@vallejokid1968 2 года назад

Coincidentally I am heading to the store to buy my new saw this morning. Thanks for the great ideas.

@KnottyBurlWoodworks 2 года назад

Thanks for this. I was intrigued by your aluminum fence but was afraid that it would interfere with my stock guides.

@tongyong007 Год назад

Very Professional and to the point. Great work sir.

@SolarMillUSA 2 года назад

I added those Jessem Clear-Cut TS guides to my tablesaw last year. BY FAR the best upgrade I've made to my table saw in a decade. They are niiiiiiiiice. I briefly tried the board buddies first, they're ok, but the Jessem is worth the price difference.

@unoseemetoo 2 года назад

Printing the little drawer now. I'm using orange PLA to maybe help me remember it's there. Thanks for the tip!

@MyersWoodshop 2 года назад

leave a review if you like it! :P

@GageDrums 2 года назад

This is great timing cause I'm about to buy my own sawstop!!

@robertbamford8266 2 года назад

Jessem stock guides👍. Outstanding for older saws with no riving knife (or usable kickback pawls). The wheels roll only one way to counter (prevent?) kickback. Extrusion fence face is an interesting idea! Speaking of fences, a replacement fence is probably a first consideration for those older saws. Thanks for the ideas.

@anthonydtobias 2 года назад

Ooooooh I like that zero clearance insert. I have not seen that before but what a great idea!. I'm going to check that out! Thank you.

@johnjenkins4 2 года назад

"I think I'll call it Cremona" - glad I didn't have a mouthful of coffee. Also thumbs up on the Jessem guides - great anti kick back and really help getting clean consistent cuts.

@detroitboy65 2 года назад

Love my Jessem clear cut saw guides! The only complaint I have is the tires. when they get a couple of years old they start degrading, becoming gooey and collecting sawdust. New tires are a little pricey but I bit the bullet and my guides are as good as new!

@allent555 2 года назад

The Wood Whisperer talks to Table Saws! What a great video!!! I like all of your table saw enhancements. Also, you can use the unistrut for custom storage solution also. Would like to get your thoughts pro and cons of adding a digital measurement device to a table saw.

@scott8351 2 года назад

Thanks Marc, I have a similar aluminum fence (Woodpecker Supertrack) on my Delta T2 Fence, but havent taken advantage of too many attachments for it yet. I ordered the hardware you linked to add any sacrificial fence small, tall whatever. I can also use them on my miter gauge since it has an aluminum extrusion Powertech fence as well. The fence you linked looks awesome, I would have just purchased that. Comes in a lot of sizes. Thanks

@markgado8782 2 года назад

I like the cauliflower piece. Didn't know about that option. Thanks! 🤠✌

@MCsCreations 2 года назад

Pretty nice upgrades, dude! 😃 Thanks for all the tips!!! Stay safe there with your family! 🖖😊

@pwknight7 2 года назад

Hi Marc, As usual great ideas and demonstration. I have most of those ideas on my table saw and they work superbly and safely. The Jessem's avoid me because of the cost. However, feather boards off a t-track on the top of the fence do a great job coupled with a side featherboard to hold everything down and on the fence. Sorry, but why do so many people forget that Magswitches can be used in stacks of jigs.... you can take them out and move them around? I have a range of them for all sorts of jigs and they are a one off cost for multiple solutions. Even the Sawstop overhead dust collection arm works great on my tablesaw. Thanks again.

@charleselkins4546 Год назад

Nice video, good tips. Especially like the tip about adding the extrusion face to the fence.

@woodwhisperer Год назад

Thanks for watching!

@gz2251 5 месяцев назад

Good advice. I did a similar thing with my Axiom CNC. They wanted $500 for an overhead dust collection pipe. Using 4" black PVC and a couple of toilet flanges, I made the same configuration for $76.

@vallejokid1968 2 года назад

I bought the Colliflower inserts based on your recommendation. Solid parts and the fit really well. Jake Colliflower was very responsive to my questions too.

@TheTranq 2 года назад

Nice tips, I especially like the 3rd party insert plate

@mikevcampbell 2 года назад

I just used strut to hang my dust collector but I didn't think about using it for the table saw dust collection. I have a 1944 Unisaw, dust collection wasnt exactly built in... If I can find a blade guard to retrofit I'm going to do copy your idea. Thanks for the video.

@chuckgrumble5440 4 месяца назад

put the extrusion on my fence and its great, i like the dust arm too

@designcreationswoodworking963 2 года назад

Mark I put my floating over arm on a Y off a single 4 inch drop. One to the cabinet and one to the overarm. On the Floating overarm I am pulling close to 600 cfm at the end of the tube.

@ABNestor 2 года назад

Nice video. Along these lines, may I suggest a video comparing after-market table saw fences? I thought your miter gauge video was excellent - but I tend to get more frustrated with the out-of-box fence on my Delta contractor table saw. It's not bad per se - just fiddly!

@bullfrogpondshop3179 Год назад

Nice upgrades! Yes, dust collection on the SawStop is exceptional when both the cabinet port and blade guard dust ports are used! And despite other prominent YT'ers saying it wouldn't work well for machines like table saws and planers, my dust collection system is powered by a large shop-vac with key fob remote control and works very well on all my machines except the chop saw. My solution to the blade guard dust port is a mini shop-vac sitting on the extension table...for now. I've been thinking about hanging it from the ceiling to get it completely out of the way, but I rarely cut sheet goods, so it's seldom in the way. Only downside is it wouldn't be controlled by remote (it's now now either). Nice build on the DIY overarm, but I don't think I'd like any type of overarm system. I may have to go with the aluminum fence though! I've noticed my fence isn't PERFECTLY straight, or square to the table for that matter, which was frustrating when I built a spline jig a couple weeks back. I screwed a cabinet door handle onto the main rail endcap and I store the allen wrenches in there. A drawer would be even better! Thanks for a great video!

@philstevens9914 Год назад

I just bought a Harvey ALPHA saw and without any accessories other than their overhead dust collection arm. This system is one of the best I've seen and every bit as good as the one that cost 3 x as much on my FELDER Sliding Table Saw. All the fences etc are from Incra. The extension table will be a full drawer cabinet built by me that extends into a full woodworking bench. I'm looking forward to seeing how it comes out.

@ehRalph 2 года назад

Years ago, I spray painted my bandsaw table flat black because the glare was a distraction when making small tight cuts. Btw, I make small drawers out of sheet aluminum repurposed from an old aluminum awning by bending it into a U shape and tacking in thin wood ends. Might try making a drawer for my table saw void, if I can figure out what to stored in there 🤔.

@NWGR 2 года назад

Informative and entertaining Marc lol Keep it up! The OG of internet woodworking. I used a piece of rockler track for my fence face. Same as the woodhaven, just blue. ;-)

@bimaldimri8817 2 года назад

Thanks for sharing. And a happy birthday to you!

@AdamMuhle 2 года назад

My recent SawStop purchase was timed with several shop upgrades, including a bigger dust collector so I can have it piped instead of moving the dust collector around all the time. So I don't have the existing duct work problem, but I'm still struggling to decide if I should tie the top port to the main dust collection or use a shop vac. I already have one very close connected to my Kapex. I might have to figure out a way to automate switching 2 1/2" hose connections as I really want to get away from moving hoses all the time.

@billystray7007 2 года назад

I've been planning to do the aluminum extrusion fence thingy since the plastic laminate started coming loose from my Biesemeyer , a little harder because it appears to be attached with self tappers, then plastic laminated Super glue has been my answer But that add-on is on my list

@nhaukap 2 года назад

Full of good ideas, thanks for the insights Marc. FWIW I've been using the Colliflower insert system for a while and really like it too, except when it leaves red paint streaks on my stock, which is bothersome and not infrequent. While I have not seen any widespread reports on social media of this being a "thing", I also can't really see how it can be just me or any sort of user error. Curious to hear if you experience this.

@johnvodopija 2 года назад

Nice video. My trouble is I need to replace the entire table saw first. Cheers 👍😎🇦🇺

@zihotki 2 года назад

The best upgrade for me was an upgrade from a table saw to a plunge saw with an mft table. Much less dust, easier to cut, requires less space. For me it works better for a small DIY shop

@josephromero1596 2 года назад

Maaaan, never thought about just using my fence to attach stop block for cross cuts - my fence already has T slots too- ty sir 😎

@lefthandedleprechaun8702 5 месяцев назад

I made me a solid surface fence for my sawstop soon after getting it, stock fence was not too flat.

@tighecrovetti2844 2 года назад

If you get the Jessem guides that are intended for router tables, you could slide them right into (and out of) your aluminum extrusion face. Then you also have them to use on your router table!

@donmartinfamily 2 года назад

Sort of. They each work a little different. It’s worth it to have the right ones.

@TheFPSCENTRAL 2 года назад

I have both, there is a significant size difference between the router and table saw versions. The router ones definitely don’t seem beefy enough for table saw use.

@Maxime-ho9iv Год назад

@@TheFPSCENTRAL This comment is strange. Router work is much more involving than table saw work, particularly for a rip cut, so if those router guides are beefy enough for your router work, they probably are beefy enough for table saw work. I think the only real difference is that the table saw guides allow you to extend them far away from the fence, meaning you can support much wider pieces.

@davidpalmer5166 2 года назад

For my over arm dust I purchased a used whole house vacuum and connecting it to my blade guard port (Shark Guard). This coupled with the high volume port connected to the base. The entire setup is turned on & off when the saw is started. It collects most of the dust. Don't forget to run the saw dust through a mini Dust Deputy to extend the life of vac.

@SirFrankoman 2 года назад

Woodpeckers rip flip is another great accessory to have, it lets you micro adjust your fence!

@gregmize01 2 года назад

The collection my friend Is flappin' in the wind 😁😁😁😁

@street_yeti7854 2 года назад

I purchased the extruded aluminum fence shown in the video and had difficulty securing it to the saw stop fence. The screws shown aligned exactly with the large part of the keyhole slot. They could not be tightened to secure the two fence pieces. I used a pair of needle nose plier to thread a washer on the screw before attaching the oval nut. Took some finagling but got her on their. Also I tried using a single sheet of paper thickness and it felt like it was dragging. When I doubled it up by folding it in half worked like a charm.

@shawnpeters3141 Год назад

Thanks for this. I'm having the exact same problem. The fence pops off when I lower it to just above the table.

@robbrown6667 Год назад

You are correct, sliding on the tee track to the fence is/was a bear. Also, the design for the screws is not great! Great Video. So, I now have the tee track installed and the jessum Clear Cut guides.

@bigpapaporsche1 Год назад

I found a used SS Overhead Vacuum assy on CR and hook it to a separate Shop Vac which is operated automatically activated switch. It works fantastically!

@jamesmoreno4155 2 года назад

I appreciate that you didn’t just name off a bunch of off the shelf crap to make a video

@rickguerrero2282 2 года назад

Funny, but I concocted a similar DIY dust collection rig for my SawStop! Saved a bit of $’s and it worked just fine.

@Madmaxian1088 2 года назад

Love this video . . . . thanks

@jimanderson4495 2 года назад

Thanks for the upload

@somebodypeculiar 2 года назад

9:04 - Some lubricant on the tap is a Real Good Ideal. For that matter, using a tap wrench and doing it by hand isn't a bad idea. I was taught to reverse the direction a bit every half-rotation or so, but that seems to have gone out of fashion.

@pmdinaz 2 года назад

I enjoy every little setup tool that you name after Matt lol

@roBLINDhood 2 года назад

Love your humor buddy!!

@Mark_Wood 2 года назад

Love my Jessem Stock guides!

@usaf4dbt Год назад

Thank you

@sehabets 2 года назад

When drilling or tapping metal you might find cutting oil to help with the process.

@janitorbob2008 2 года назад

So question about tapping, I have only done it on mild steal and by hand, for taping other materials like brass or aluminum is the process done different, do you need to do back turns to clear the threads?

@sehabets 2 года назад

@@janitorbob2008 I use the same process regardless of material, though if I'm tapping wood I don't use cutting oil. Slow cuts backing out to clear threads every few turns like you said. I know some are comfortable using power tools but I still just do it by hand.

@twistedlimb4053 2 года назад

Came here to say that, it was like fingernails on chalkboard to watch that.

@msk3905 8 месяцев назад

I need to get that last Jessum upgrade

@Devin_Perkins 2 года назад

Man, Todd nailed the edit. Love the American flag overlay on the drill index, etc.

@petebuehn7789 2 года назад

Great video, I was looking at how you mounted the Jessem guide and at 9:16 in the video it appears that the guides are mounted on the aluminum extrusion. Thanks

@rw7532 2 года назад

Woodcraft and Infinity have sales on the Jessem saw guides from time to time. I saved $60 the last time they were in sale. Also, if you do decided to mount them using wood and mag switches just done screw the magswitch down and you can use them on other jigs as well. A person could just plain the word strip to the exact thickness of the magswitch and the lip on the mag switch holds the wood strip down.

@rw7532 2 года назад

Edit: don’t screw the mag switches down. For some reason I cannot edit a post on RU-vid using my iPad.

@kevingebert4316 2 года назад

I'm surprised your saw didn't come with the "free" overarm dust collection where that whole arm pivots and pops in and out via friction at the end of the table and splices into the main dust collection. Anyhow, wondering if and when you'll opt for the Sliding crosscut table addon. I just got mine a week ago and is awesome especially for large sheets of plywood and bulky large crosscuts of solid wood. I'm building the executive desk now and will try it out trimming the ends of the large table top instead of circle saws and straight edges. Only pita is the need to occasionally remove the miter fence to do ripping wider than 15" to the left of the blade. But that is just as fast as changing from dado to regular blade and brakes :) I think I'm going to try your aluminum fence option and eventually the Jessem guides as I see a need for that often on longer rips.

@macponyme 2 года назад

You know how to cut metal too ? Who knew ?! 😁. Great video.

@chrishayes6057 2 года назад

I just got the Festool dust extractor, but it doesn’t fit into the sawstop blade guard. What connector do I need to make that happen? Thanks, love the videos!

@randallhooper4451 5 месяцев назад

Thank you. Do you have an upgrades list for a dewalt table saw?

@SteinerHaus Год назад

Good information. I realize that I'm something of a dinosaur in that my table saw is a 48 year old Delta Contractor's 10 inch. Having said that some of the suggestions that you make can be adapted to the Delta, but not all of them. SacrificiaI fences and the like are an interesting project to do on the Delta fence. I have a Ripstrake device that acts as a hold down on the fence that is also probably pushing 45 years old. It requires an add-on to the fence for use. Don't know if anyone else uses the things or not. ZCIs are mostly made from 1/2 laminate flooring at a fraction of the cost of a OEM insert. Dust collection is a FrankenVac system, but I to like the overhead arm idea. Mebbe in the winter I'll get out my DIY Engineer Cap and have at it. Wish I had the time and bucks to invest in a "newer" saw, but the old Delta does what I need and want to do.

@texascraftsman7215 2 года назад

Hey you ever think about building a custom cabinet under the wing of the saw for storage… it’s really convenient and looks awesome but I’d like to see what to come up with

@MarkDavis77 2 года назад

Have you done a video on where to source lumber for things like books shelves, furniture, etc... just general non-construction lumber? This is what I'm having a major problem doing and it's really impacting my desire to attempt larger projects

@sammisworkshops3762 2 года назад

I like all of this, very cool ideas, not sure about the name Cremona for the baby stop LOL

@thatguythatdoesstuff7448 2 года назад

The Jessem guides are the best accessory I've ever bought for any tool. I agonized over spending the money for a long time. After using them, I am still lamenting not buying them immediately.

@CosmicCharlie 2 года назад

Happy birthday Marc! Live long and prosper!

@woodwhisperer 2 года назад

Thank you sir!

@JW-qc2qk 2 года назад

I looked into getting a fence rail drawer for my Biesemeyer fence and found someone on Ebay selling 18 inch or 36 inch long drawers that fit Biesemeyer rails for $ 25 or $ 30. I ordered some 18 inch ones and will see how they are.

@PhilippStarsky 2 года назад

6:11 "Blammo" - That was a nice Blammo moment.

@paulyanney3151 Год назад

Thanks I just ordered the zero clearance insert. How did you fit the riving knife with it? I may try that fence replacement too?

@richo8767 2 года назад

Didn't you once use some kind of hold down similar to the Jessem that was magnetic to the table top? Looking for something for holding down stock tight to the table when cutting miters in wider boards where the fence is too far from the blade