My Favorite Table Saw Upgrade EVER!

Подписаться 593 тыс.

Просмотров 254 тыс.

50% 1

Getting accurate cuts on a table saw isn't always the easiest thing to do, especially when cutting large sheets of plywood by yourself. These Jessem stock guides keep everything pressed firmly to the fence, giving you better cuts while also preventing kickback! Amazon and other affiliate links are used in this description and help support this channel.
Videos To Watch Next
Safer Cross Cut Sled - • How to Make a Table Sa...
5 Jigs You NEED For The Table Saw - • 5 Jigs You've NEVER Se...
PLANS and MERCH: www.731woodworks.com/store
Greatest Free Gift: story4.us/731Woodworks
Products in Video
Jessem Stock Guides - amzn.to/3yIxEAN
MagSwitch 2-Pack (Amazon) - amzn.to/3oeMeuN
MagSwitch 2-Pack with a forstner bit (TayTools) - lddy.no/1c6pl
My Free Jig Plans - www.731woodworks.com/store/je...
Allred Woodworks - allredwoodworks.com (thanks for the idea!)
Sign up for the 731 email newsletter to get exclusive deals, be notified of new content, and more! mailchi.mp/7e44c16eefdc/731-w...
Follow me on Amazon for more tool reviews: www.amazon.com/shop/influencer-4e5e1fdd
Join this channels membership to get access to exclusive member-only live streams, discounts, and other perks:
/ @731woodworks
You can support us on Patreon as well / 731woodworks
I get my stickers from Sticker Mule: www.stickermule.com/unlock?re...
#woodworking #731woodworks #tablesaw
0:00 Easily Cut Full Sheets of Plywood on a Table Saw
1:00 Jessem Clear-Cut Stock Guides
2:07 Adjusting Jessem Stock Guides
5:00 How the Jessem Guide Works
5:40 Table Saw Kickback Prevention
6:00 Jessem Guide on Other Saws?
6:24 Limitations of Jessem Stock Guides
7:04 Cutting Plywood with Jessem Stock Guides
9:14 Figure this out Jessem!
9:48 Will they get in the way?
10:17 Jessem Build Quality
11:02 Making the Jessem Stock Guide Jig

Хобби

Опубликовано:

1 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 254

@Wolfen6 10 дней назад

Excellent video. I bought this product because of you and can't believe I went so long without it. Jessem should pay you for this and sponsor you as it is the best instruction on how to use the product. The paper instructions that came with the product were somewhere confusing and useless. Thank you!

@ozzyozzy6728 5 месяцев назад

Vertical panel saw is the way to go . Safer , accurate and space saver

@Anthony-kd5ku Месяц назад

This setup looks awesome! Don't know if I'll be able to swing the cost from my own pocket. Kinda pricey for me for but very tempting even if I'm just an employee. Love our saw stop. Work in a cabinet shop and rip down 3,4,4.5" melamine and maple/birch plywood strips for toe kick and stretchers. Used my RU-vid degree to hunt down some of the best videos on woodworking shops. This one and the 99% of beginners video have been added to the playlist. Thanks.

@pacificcoastwoodcrafts Год назад

Nice to see a Canadian product featured. 🇨🇦

@CeeJayThe13th Год назад

That thing is pretty slick! It won't fit my jobsite saw but it's definitely in the back of my mind for a dream shop scenario!

@philmurphy7487 Год назад

Best part of my day: a new 731 video 😃

@731Woodworks Год назад

Thanks Phil!

@philmurphy7487 Год назад

@@731Woodworks hey youre the sharing the knowledge; my first thought was how do you use a push stick with that and then yeah, like you said, better just save a tool like this for panels and stuff. Thanks for all you do!

@rickyperkins232 Год назад

@@731Woodworks just use a track saw, much better and safer than putting it on a table saw. Simple.

@getitrightthe1sttime344 8 месяцев назад

I mounted this to my Bosch jobsite tablesaw game changer. Love it.

@michellegatz7077 Год назад

Excellent video, I have one and now I feel really confident using it

@mackdenn 3 месяца назад

For my Delta 36-725T2 table saw: I made a jig for the fence and mounted the Jessem guides on it but to allow the 2 Magswitches to contact the metal on the top of the fence I had cut a small amount off the track plate ends. This allowed the magnets to sit on the metal and do their job but I didn't have enough space, width or length to screw the magswitches to the jig. They still work fine because the magnets are so strong but because of the slight difference between the magnets length/height and the 3/4" stock I used for the jig, the stock guides can move vertically about 1/16". I fixed that problem with placing metal washers under the flange of the magswitches to take up that space and all is good with the world again. I love these guides and how well they work. They improve accuracy and safety for cutting sheet goods. This design also allows me to move these guides to diiferent table saws by making a specific jig for that machine and not having to buy another set of guides. Yes, they are expensive but well worth the money, thanks for sharing and a special shout out to all the other students of RU-vid University........GO TUBERS!!

@mishellekochel4510 Год назад

I absolutely love this attachment. I got it before my table saw purchase. Watched too many kickback videos when I was contemplating spending money on a SawStop or not. Yet another great video Matt!!!

@choprpilot76 Год назад

I just bought a fully loaded 3hp Sawstop PCS 52” last week, Industrial Mobile Base, Overarm Dust Collector, Outfeed Table, and the Sliding Crosscut Table. Been waiting to assemble it, the mobile base is due to be delivered tomorrow. This is replacing my 3yr old Grizzly G0691. I already bought my Magswitches and plan on buying these roller guides this week. I never heard of those Jessem roller guides until about 2 weeks ago. New to your channel, love your videos and LOVE YOUR FAITH IN GOD. How he provided you with your new Sawstop is just awesome. Take care, God bless and keep the great videos coming.

@meatstick12gben Год назад

I have this on my table saw as well, very useful but I usually break a sheet down to smaller sizes with my track saw . So much simpler to me. Great video Matt , good info

@chipsterb4946 8 месяцев назад

Your approach makes sense to me. I’m glad he pointed out the problem with using a push stick, etc. with these guides. I saw another presenter neglect to mention that and I was looking at it wondering “How do I use a push stick now?”

@KrazeeKraftZ Год назад

I have, what is essentially, a portable worksite table saw, however, I'm going to make a better stand for it to make it more permanent, and I'm putting a lot of thought into creating a decent fence for it!! Watching this video has given me some good ideas, thanks!!

@giannisozo7928 Год назад

I wish I had thought of this. I attached the guide rail directly to my fence and just untighten the bolts and slide off the two roller units. It doesn't take much time but this looks a bit easier to use, keeps the rollers together, and won't wear out any bolts over time. 👍

@jeffchenoweth692 Год назад

Hi Matt, I appreciated this video. I had originally mounted the Jessem guide rails direct to my fence which made it way too heavy and got in the way of other accessories like my tenon jig! This is a great solution. I have a Powermatic cabinet saw so the dimensions are a bit tighter, but it all works. One suggestion, if you put the 'hanger hole' at the 'user' end, it doesn't interfere with the motion of the fence lock lever. That just may be on my saw, but it made sense and worked great. Thanks again. Jeff

@louiswhitney1761 Год назад

Best add I have ever seen… already have them in. Y Amazon cart… thank you…

@shilohwoodcrafts2955 Год назад

I just purchased these through your affiliate link, and the mag switches,they are going to arrive today, gonna make the jig so I can cut the live edge off of 8/4, 10’ red oak, thank you for the info, and free jig plans.

@gregariouswoodworks1270 Год назад

That's a really cool gadget. Even though I only have a job site saw, it was cool seeing how this works

@BretChilcott 6 месяцев назад

Awesome video! Thank you for sharing your knowledge.

@allanstewart758 8 месяцев назад

I really like my jessem stock guide. I like the mag switch idea. I wish I'd know about it before I drilled holes in my fence

@LYTOMIZE_Woodshop Год назад

Thanks to you and Brother Riv, Santa heard I had a special wish for Christmas... so he brought me two special tools this year - this was one of them! I can't wait to build your jig and get it installed. Ripping sheet goods will never be the same again. Thanks!!

@731Woodworks Год назад

That is awesome!

@steveeure5975 Год назад

Matt, as mentioned down below, I use a standard push stick that came with my Delta to push narrower pieces through the saw when I have the rollers engaged. I will push on the end once the board is past the first roller and turn the push stick sideways until it passes completely through the first roller and is caught by the second. Once it's through the first, I then take the push stick and push normally from the top. Works well for me and still do not have to worry about kickback. Best item I've ever put on my saw. Invaluable with sheet goods as you pointed out. Thanks for sharing.

@ScholteimReinbachIII 9 месяцев назад

I find 2 of microjig’s push blocks gets the job done just as well and it works for big and small stock.

@robertbamford8266 Год назад

You’re right on target. I’ve used them for years on my vintage, riving-knife-less, splitter-less 10” Craftsman table saw (which I bought new!). They were the second upgrade. The first upgrade was to buy and install a real fence. (BTW the saw did have a splitter, but it was a huge safety hazard because it would never stay in line with the blade).

@gund2281 Месяц назад

JFC for $300 these guides BETTER be the bees knees! Good god!

@talegunner4414 Год назад

I really love the way yours magnetically holds to your fence. GREAT JOB

@bbest8 Год назад

Awesome...wish I had that (& sawstop...or better tablesaw) before the kickback cut my 2 fingers! Thanks Matt! 👊👊👊👊👊

@msk3905 6 месяцев назад

I need to get this Jessum upgrade!

@michiganracer1181 Год назад

Love this table saw accessory. Also I’ve used the chrome orange saw blades recommended by you. I cut some 1” thick aluminum with the 12” and 10” blades while making a jig. They still have a great cut on hard woods, impressed, thanks for the recommendation and helping us find new and better tools.

@nsanerydah Год назад

Genius idea. Keep up the great work and stay blessed!

@fishingwiththearmydogg1849 Год назад

I did the same thing with a tub like yours that had a couple inches of mineral oil, took a little while to clean up. glad you kept that in the video, we all are human.

@mudd_m-cubed_customwoodworks Год назад

I had a gallon of mineral oil top get busted. I lost half of the gallon on my floor so understand this situation. But I will be definitely using this upgrade on my saw soon.

@dlight9456 Год назад

I've noticed the tarp sign at your back. And I agree.

@ronswoodshack Год назад

That would definitely help with larger sheet goods. Thank you for the content Mighty Matt.

@greghoward5662 Год назад

Love the honesty in your reviews. Thanks. Don’t Stop.

@hansangb Год назад

@9:25 I didn't mind screwing it down. I think the one issue with the magswitch approach is that *if* there is a kick back, I don't know that the magswitch will have the holding power necessary to prevent the kickback. I have a feeling that the whole assembly will fly back. Also, they do make thin push sticks with handles that are offset and they work well for the Jessem setup. Finally, the build quality is awesome. And the drilling template is built right into the product. Pretty much idiot proof and very very accurate.

@ToddWedlake Год назад

150lb magnets will. Anything smaller will not. I've tested it to some extent. (2) 150lb magnets is 300lbs of pulling force. the fence will come off first

@hansangb Год назад

@@ToddWedlake I'll be the first to say that kickback is unlikely using this tool. And the Jessum coming off even more unlikely. So this is more theoretical than practical. But there is a key point that people should consider. If there is a kick back event, the force being acted upon is *not* normal to the saw table. Unfortunately, that's the core strength of the magswitch devices. It prevents lifting of the magnets (normal to the table). Magnets do a poor job is preventing lateral movement - 90deg turned from normal force. In other words, in an (unlikely) kick back, the force being acted on will be more horizontal than vertical. It'll slide (shoot) off the table rather than fly into the air vertically. So magswitches wouldn't really hold since they are meant to hold vertical (normal) forces and not horizontal. You can slide the magswitches much easier than lift them. I guess I should have just said that! :)

@toddmadsen2732 Год назад

luckily for me I changed my fence out to a VSC fence which is extruded aluminum. These guides slide right in..no jig necessary.

@WasimBarri 7 месяцев назад

You can do narrow stock with these. I do it all the time. The restriction you have shown is the safe use of a push stick. Just use a narrow push stick and push horizontally as the guides take care of pushing down and towards the fence. What I mean by narrow is thinner than the stock, in that way the push stick goes under the rollers when pushing the stock. I've cut stock less than 1" (25.4mm) wide safely. The only condition is that the stock is long enough to be controlled by at least one stock guide throughout the cut. If not I'll use the Grrripper.

@wwh2694 Год назад

Great video. Been using this jessem for a while now on my table saw and router table. I just switched them in out without any hassle. Great addition for safety.

@crzyworm623 Год назад

I got mine a few weeks back, I was really surprised at how well it was made, even the included allen keys, hardware, and drill bit were far better than you normally see included. Would be cool for them to make a new mounting plate that already had 2 spots for the mag switches, but maybe they feel that's not as secure as using the 8 screws. It's probably a better buy, to buy a starter feather board kit with the two 150s.

@laigocustoms4965 Год назад

I have been using these Jessem guides for about a year on my grizzly G1023 RLX and they are a game changer especially cutting full sheets

@ianrose2823 Год назад

Had mine for years ... use them all the time . Great!

@dbiegel7961 Год назад

Great video Matt. I installed a set on my table with an Incra fence. Jessem makes an adapter kit to mount to the T-track of the Incra fence system. What a difference these make to holding your workpiece against the fence.

@chrishorne8247 3 месяца назад

Love the poster on the garage door!! Nothing like sitting across the dinner table from someone eating meat for dinner and telling me I'm wrong for hunting!!😉 And yes, I'm saving my pennies for a set of Jessem stock guides. For every pound of venison I harvest, i put the money I save on beef toward my woodworking hobby!!

@grumpywiseguy5992 Год назад

Great video. I think for professionals like you, this is a no brainer. For us occasional users/hobby type people, a tracksaw with a guide that I already own is probably a little more cost effective. It will interesting to see down the road how this system holds up and how often you use it. Regards and stay safe!!

@jimserhant7741 Год назад

Thank You for another great product review! That looks like a great product for cabinet table saws. I use the Bosch 4100XC-10 portable table saw in my small shop, what I find that works well to achieve the same outcome as the Jessem when cutting large sheets is the bow products fencepro. I never had a problem with the sheet coming off the fence since I found them.

@LYTOMIZE_Woodshop 5 месяцев назад

All this time later it still hurts to see the mineral oil spill. I finally have a need to use my stock guides so I'll be taking them out of their box and building the jig for my SawStop. I've pulled the trigger on mag switches and will get them tomorrow.

@soujrnr Год назад

Wow! What a great idea that is! I just may have to get me one of those. That being said, I prefer to cut large sheets with a track saw, but the hold down feature is great! Thanks for highlighting this, Matt! I never even knew something like this existed. And the magnet idea is golden as well!!

@ravenheart1439 2 месяца назад

Can use a feather board on the front to push stock through, guides on the back...I assume anyway...these are next for my saw...

@dougc78 Год назад

Drilling into my SawStop fence is exactly why I never purchased these. Your idea is as simple as it is clever. Thanks for sharing.

@danlopretto7222 Год назад

Thanks for the review. I didn’t realize they create a lateral force as well as a downward force. Good to know.

@richarddpetersen169 3 месяца назад

Most excellent idea,

@willcunningham8818 Год назад

Awesome video for these! Very comprehensive. I always can trust your reviews. Thanks man

@731Woodworks Год назад

I appreciate that!

@joeysublett4497 Год назад

Could these also be used on the outfeed side of a jointer? Especially with "warped" boards?

@kellyroy8506 4 месяца назад

Loving the videos. I just purchased the Bow XT fence extender. Which I saw in one of your videos. Will these attach to the Bow Fence?

@kencoleman7762 Год назад

I put a set of these Jesse Clear Cut Stock Guides on my Saw Stop and they are awesome. They draw the wood firmly against the fence and safety is greatly enhanced.

@richbmass Год назад

Great solution! Will these work with a SawStop Floating Overarm Dust Collector ?

@joblack432 Год назад

Something I need. Jessem is high quality! I use their dowel jig and it’s just on another level. Thanks for the video. I enjoy it since it makes you human spilling your mineral oil plus you give us your unbiased opinion.

@TheHandystanley Год назад

I have the JessEm Stock Guides and need to build this jig. Question, as the plans did not over it, what size screws did you use to mount the Guide to the plywood?

@smidtwarner Год назад

I understand not wanting to drill holes into the top of the fence or anywhere-especially on a new machine. At the time, your magswitch idea did not pop into my mind nor did I have or anticipate any “dream” fence accessories that would conflict with the t-track. The center of the fence is recessed sufficiently that little if any of it protrudes above the sides boards. I had one project where I needed to cut around 15 4x8 sheets of MDF into 3.25” wide strips 8’ long. Wow! I was so happy to have these JessEm guides! Like Matt stayed, they held the MDF tight t9 the fence. This is not so easy when you have to take several human steps to feed 8’ through. I had a helper that day, so the infeed guy did not need to push the trailing end through the maze that the guides inflict. The outfeed guy merely pulled the out. Yes, this an expensive accessory. I am not doing any woodworking for income purposes whereby I can consider it a deductible expense. But I was doing enough repetitive cuts out of sheet stock-and cuts that had to be accurate-that these guides were like having a second pair of hands. PS JessEm’s router table fence guides are are just as sweat. They are as much about being a second set of hands as the6 provide a significant degree of safety improvement. When routing a lot of lineal feet-especially long lengths-the guides can doing all the holding near the spinning bit with no need for fingers being nearby.

@dannyparke4477 5 месяцев назад

I’m in a wheelchair. I have a powermatic cabinet table saw. The height of me in my chair puts me directly in line for kickbacks. Which would shoot through my body like a bullet if bad enough. After adding these to my saw years ago I love them. Yes they are a pain on small stuff but you can’t put a price on your life. Just my opinion.

@ryanschultz6633 Год назад

8:46 mark in the video, it does pull away from the fence. I know it's still better than not using it, but it definitely pulls away.

@erichelton1888 8 месяцев назад

Old video but a setting question. Is there any benefit in setting the wheels further away from the fence? Seems that if you left them close it would always work fine.

@mitchellcollins7370 Год назад

I’ve got a good bit of inch thick maple boards off of a woodworker for cheap. Not sure what I should make out of them. Any ideas?

@flatlander523 8 месяцев назад

Matt I think you should mount the aluminum bar to the fence as designed. It is always important to use a tool as the design engineers intended. Surely the mount screws are not that harad to remove. Oh man sorry about the mineral oil spill. LMAO at your recent video about those Chinese knockoff tools. Keep digging...

@kwilliams2239 Год назад

I'd been looking at these for some time. Woodcraft had a big sale on them early this year. They didn't expect the demand. I was number 370 and didn't get removed until April. No problem. They're still not on the saw. I thought about a jig, like yours, but the top of my fence isn't steel. Jesse's quality, for allowing their products is superb. I have their router table, lift, slide, and stock guides (same idea for a router table). Top notch tools.

@Zamboni-0805 Год назад

If you have a T-slot on the side of your table saw fence then you can use the router table version. I been using the router version for some time now.

@barriowoodworks Год назад

I did the same as you Matt. Couldn’t get myself to drill into my fence. I don’t even allow anyone to place their hands on cast iron tops.😄 These guides have definitely helped me step my game up with carcass builds. Good stuff. 🤛🏽🙏🏽🇺🇸

@731Woodworks Год назад

thanks!

@TheOtherGuybo Год назад

That is an excellent upgrade!

@kidrockn4vr Год назад

Will these work on the new skill tablesaw you demonstrated. Forgive me I’m just starting to learn about woodworking

@andrewbrown8148 Год назад

Great video, Matt~! I have the JessEm guides for my router table and love them. I've thought about putting a set on my SawStop, but didn't want to drill into the fence either, so now I'll relook that idea seeing your solution. I'd thought about doing it with MagSwitches, but I've never used them yet and didn't know if that would work. Very happy to see that they do. Thanks for the video~!

@Zamboni-0805 Год назад

This solution has been around for some time...others have posted on how to make the jig. This was not Matt's idea, even though he kinda claimed it was .

@andrewbrown8148 Год назад

@@Zamboni-0805 Not saying it was his idea, but it was a great execution of the concept. The first I've seen on video.

@Food-Fire-and-Featherboards Год назад

I have those router guides also, and if you have a T-slot on the side of your fence they work great with the table saw as well. Can't use them with narrow stock of course, but you also shouldn't need to. And if you don't have a T-slot on the side of your fence, make a clamp-on jig. Cheers!

@BrianRodecker225 Год назад

Wow. That’s an awesome and safe way to cut long or wide pieces of wood. Hey Matt have you seen the new compact table saw from sawstop CTS-120A60. I think this bad boy will be awesome for small shops like mine.

@randallcarver6950 Год назад

Thanks for vid. I saw this method with another channel from a year ago "Acutabove woodworks“ from a year ago and put the Magswitches in my cart. Then you do this video Well I placed the order as I do lot want these stock guides attached permanently to my fence either Also want to commend you on your restraint when the mineral spirits fell. I would have gone into viral cussing mode 😂

@sneezingfrog Год назад

I've used these for a few years and they're exactly as good as you describe them to be; once you've used them you don't want to ever be without them. The one thing I'd argue with you about is the need for a jig; I installed mine on that same SawStop fence, and the thing is, if you just remove the blocks from the track, the track is really pretty low-profile and doesn't get in the way of anything else I'd want to be doing with the fence. That said, nice jig there; pretty sure a lot of folks will be interested in that option.

@csimet Год назад

This is my next purchase. I have and love thier router guides that do the same function.

@MattsTAW Год назад

Man, I could have used this yesterday. Nice piece of kit.

@paynescarpentry 9 месяцев назад

Do the rollers have to be on the rail, or can I mount them directly to the board? The rail is too wide for my Delta fence, but the rollers will just slide in. Any recommendations? Maybe get a new fence?

@teehotice5097 9 месяцев назад

muy buena y de calidad

@Techreux Год назад

I wish the set was more affordable.. the set for the router table is waayyy less expensive! A little beyond a retiree's budget. Yes, I have had to fight "blade pull" like everyone else. Hoping some day the price will drop below $200.. great device..

@jameslindeman2562 Год назад

I put a set on my saw stop a year ago. I cannot recommend them enough. It really does cut does on burning when cutting certain hardwoods as well as sheet goods.

@kenluning909 Год назад

Nice video review. Yea I would have to make a jig for my fence also. But great results.

@markkleckner3060 Год назад

Good info when I get a Table saw, right now I have Portable Table saw, God Bless!

@chrisallen3741 4 месяца назад

Can you tell me what kind of fence you have? I have an old bullet delta table saw and the fence is really nice but it is not very adaptable

@shanemelville Год назад

I love your video Matt I own this guide rail to I love it. The way I push the wood through these is with a stick or a long narrow board, you lay it on the table and just push it through. You don't need a push stick you don't need any downward pressure or pressing it towards the fench, the guide rail will do that for you. I have a sugestion have you look at "very cool tools" table saw fence. It is wonderful plus Jessem has a attachment for that fence. Check it out

@jowaldo 2 месяца назад

Are the 150lb magnets really necessary? Other similar videos recommend the 95lb ones, which cost less than half. I'm sure with the force from a possible kickback, the more the better, but is 150lb too much overkill?

@kenrogers375 Год назад

Mag switch, Briliant!

@BudjetBassin Год назад

Those are amazing!

@8082Speed Год назад

I have these on an incra TS-LS fence. The fence is on my 37 year old Craftsman cast iron contractor saw. I love it.

@shilohwoodcrafts2955 Год назад

Wanted to ask you a question Matt, I installed these using the jig, but they are not applying very much pressure to the wood at all, I know this is probably user error, in the video do you set the guides to the last set of screws?

@731Woodworks Год назад

Check out Jessem's video on how to set them here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-I7b-i8Llv6w.html

@trenton7 4 месяца назад

How’s that different from featherboard?

@michaelmischke5758 Год назад

Have these on my Jet for well over a year, they are mounted to my fence with no issues. the two units can be total removed if they get in the way. I use a push stick with no handle for cutting thin stock. Love them, well worth the money but one needs to review the dimensions of the track with your table saw fence, I had to make some adjustments to my Jet fence to get the track to mount.

@ZER0o10 9 месяцев назад

Will this work on a dewalt table saw?

@chuckw4680 9 месяцев назад

How does this compare to a feather board?

@bobdriggers6111 Год назад

I have their router table version. They work great. I'll probably get these for my table saws. I wonder if you could buy just the guides. I have the Incra TS-LS system and it already has t-slots in the fence.

@Zamboni-0805 Год назад

I use the router table version on my table saw and they work just fine.

@bradhillig9844 Год назад

I see that Amazon has the mag switch in different lbs. ratings. Do you know what strength you used?

@731Woodworks Год назад

150 lb

@ex-nerd Год назад

How did I not know my sawstop fence was magnetic?! Wow, this opens up so many possibilities with my recent purchase of a couple of those magswitches (thank you TayTools scratch/dent lucky find)

@AGlimpseInside Год назад

Welcome to the safety club. Best investment for my table saw ever

@731Woodworks Год назад

They are awesome!

@5280Woodworking Год назад

IMHO it is so pivotal I mounted mine directly to my Sawstop fence. You can slide them off and still fit jigs and I have a couple that actually use the t-slot. I can’t imagine NOT having them. Honestly I feel people overthink screwing them onto the fence. I get it, but after having them it’s a no brainer.

@calebjhaynieful Год назад

For smaller stock the magswitch feather board does a great job

@tom.coomes Год назад

Great video as always! Chris from A Glimpse Inside did a review on these as well about a month ago and he had about the same reaction to them as you. I will have to pull the trigger on it soon.