7 Ways To Connect Studio Monitors (Speakers) To Audio Interface

Подписаться 87 тыс.

Просмотров 129 тыс.

50% 1

This video will show you 7 different ways to connect studio monitors (speakers) to your audio interface. You will see exactly what cables you need! We use the Focusrite Scarlett 2i2 and Yamaha HS5.
PRICING FOR EQUIPMENT FEATURED IN THIS VIDEO:
► Focusrite Scarlett 2i2: currentprice.io/scarlett_2i2
► Solid State Logic SSL2 : currentprice.io/ssl2_plus
► M-Audio M-Track Solo: currentprice.io/mtrack_solo
► Elgato Wave XLR: currentprice.io/wave_xlr
► Yamaha HS5 Studio Monitors: currentprice.io/hs5_monitor
► XLR Cable: currentprice.io/xlr_cable
► TRS Cable: currentprice.io/trs_cable
► TRS To XLR Cable: currentprice.io/trs_xlr
► TS To RCA Cable: currentprice.io/ts_rca
► RCA Cable: currentprice.io/rca_cable
► 1/8" To TS Cable: currentprice.io/14_to_dual_18
► 1/8" To RCA Cable: currentprice.io/18_rca
► Mic Stand: currentprice.io/desk_stand
► Rode PSA1+ Boom Arm: currentprice.io/psa1_plus
► Quality Acoustic Treatment Panels: currentprice.io/soundpanels
These are affiliate links, and I may earn a commission from Amazon (and others) on qualifying purchases.
BLOG POST WITH MORE INFORMATION:
► kettnercreative.com/audio-int...
CHAPTERS:
0:00 - Introduction
0:28 - Pricing & Specs
0:47 - Studio Monitors
1:13 - Studio Monitor Power/Volume Level
1:47 - Cable Length
2:37 - Balanced vs Unbalanced Cable
5:05 - Method 1 - Balanced 1/4" TRS Cable
7:01 - Method 2 - Balanced 1/4" TRS to XLR Cable
9:01 - Method 3 - Unbalanced 1/4" TS Cable
10:38 - Method 4 - Unbalanced 1/4" TS to RCA Cable
12:21 - Method 5 - RCA Cable
13:21 - Method 6 - 1/8" TRS to Dual 1/4" TS Cable
14:21 - Method 7 - 1/8" TRS to Dual RCA Cable
15:14 - Summary
15:27 - Final Thoughts
#studiomonitors #poweredspeaker #audiointerface
BECOME A MEMBER OF OUR CHANNEL FOR PERKS & EXCLUSIVES:
/ @kettnercreative
STUDIO EQUIPMENT:
Camera: currentprice.io/sony_a7iii
Lens: currentprice.io/sigma_24_70
B-Roll Gimbal: currentprice.io/dji_om4
Lav Mic: currentprice.io/deity_wlav_p
Lav Recorder: currentprice.io/tascam_dr10l
Headphones: currentprice.io/beyer_dt_990
Studio Monitors: currentprice.io/hs5_monitor
Video Recorder: currentprice.io/ninja_v
Key Light: currentprice.io/keylight
Fill Light: currentprice.io/keylight_air
Uplight: currentprice.io/astera_ax5
Truss: currentprice.io/truss_black
Editing Computer: currentprice.io/mac_mini
Editing Monitor: currentprice.io/lg_32in_4k
SOFTWARE & TOOLS:
Final Cut Pro: geni.us/qW5K
Affinity Photo: geni.us/86RLOhZ
Epidemic Sound: geni.us/eiPf1G
Envato Elements: geni.us/ENFErA
Tubebuddy: geni.us/Md6v
VidIQ: geni.us/dqUyD
Riverside FM Podcast Software: currentprice.io/riversidefm
GeniusLink: geni.us/vss0P
Website: kettnercreative.com
Instagram: / kettnercreative
Facebook: / kettnercreative
Twitter: / kettnercreative
Kettner Creative is an experienced team of audio-visual professionals. We create tutorials, comparisons, demonstrations, and reviews for home studio equipment under $500 including audio interfaces, audio mixers, microphones, and more.
kettnercreative.com
Disclosure: If you purchase an item or service from an outbound link, we may receive a referral fee, which helps to support Kettner Creative.

Кино

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 157

@lawnboyph 2 года назад

Your guides are simply great - your method of teaching is great.

@TheCsabi86 Год назад

Dude, you told me everything I was looking for, thank you so much! 👍

@dominicdriman1319 2 года назад

Very good explanatory videos! You are very pedagogical, I am learning a lot! Keep up the good work!

@h1mb0t 10 месяцев назад

This is the best answer on the internet by a country mile. Thanks for taking the time to educate!

@Mystique2u 2 года назад

All the info I needed to hook-up my monitors to my audio interface with the TRS cables. I was definitely over thinking the setup! Great video!!!

@kettnercreative 2 года назад

Great to hear!

@paulb356 2 года назад

Excellent -- very clear and helpful. I will check out other videos of yours. Thank you!

@mustafazeybek8229 Год назад

ı have zero knowledge about sound interfaces and studio monitors but thanks to you, ı begin to understand how ı can use them when ı buy them. Your explanations are clear, simple and well informative. Thank you sir.

@Pwasercan 7 месяцев назад

awesome video, I'm thinking about buying studio monitors, but I had no idea how to set 2 of them for left and right through XLR. Awesome to see all the solutions and ways of connection 👌🏻

@siavashebrahimi 10 месяцев назад

Best video Answered all my questions. Thanks.

@angelesjimenez6774 4 дня назад

Thanks a loooooot! I've been studying about cables and connections all day, and your vid supported my guesses... straightforward and clear!

@ainsbass 2 года назад

Great video, the idea to run through a few different methods and rank them was very helpful.

@kettnercreative 2 года назад

Glad it was helpful!

@iwarsam Год назад

Just the video what I was looking for, thanks!

@rustybonesblueschannel9664 2 года назад

very good job communicating clearly.

@zackii90 Год назад

Very nice and clean instruction. Thank you very much.

@jonatansuarez2844 2 года назад

Muy bien explicado entendí todo al pelo... Se le agradece..

@sinlokemp Год назад

Very Helpful. Thank You

@cliffbolin7716 2 года назад

Great video. I am new to all of this so it’s great to have this basic info to get me started. My topping dx7 pro amp/dac for listening to headphones also has rca and xlr out for speakers. and my speakers are binding posts only. Should I buy an xlr to a banana plug cable, or an rca to banana plug cable? Or some other option I’m not thinking of?

@akshayyc010 Год назад

This was really helpful bro, thanks

@JacobCunninghamBell 2 года назад

Thanks! Great explanation

@theHAL9000 Месяц назад

Outstanding video on the subject. Thanks!

@bumihijau.studio2058 2 года назад

This is a very good video. And thanks for sharing the info about the differences between TS cable and TRS cable. Before watching this video.. I don't really give a serious thought about it. Frankly I just started about having my own home studio. And I do have this one problem like the one you mentioned in this video and that is about the buzzing sound or unwanted electronic signal or noise. I realised that one of my monitor speaker was connected to my audio interface with TS or unbalance cable. Why I did that? At the time when I was setting up my home studio, I was short of one TRS cable. So I just grabbed one of my guitar cable which is a TS cable and used it to connect the monitor speaker. I did this bcoz I just cannot wait any longer to record my first song. So when I started to record my first song, it was like HELL..!! While I was recording, I kept on hearing some unwanted sound or noise and as a result there were few glitch trough out the song that I was recording. So I have to stop and restart for many times bcoz of this and it took many hours for me to record for one song. I'm taking your advice seriously and I'm getting the TRS cable by tomorrow ASAP. Thanks Bro.

@robluv7847 Год назад

Thank you so much for the tutorial.

@Noob-zi2ce Год назад

Wow! Great tutorial. Everything i need to know now. Thanks

@kettnercreative Год назад

Glad it was helpful!

@jurgdiriwachter7290 Год назад

Thank you very much for this explications 🙏

@bobtan9845 Год назад

very very helpful video. thx so much.

@bijanbonyadi1787 Год назад

This was flawless

@abc456f 2 месяца назад

I've got some old equipment but still sounds very good. I do have a Focusrite scarlett 4i4 interface, connected to a 40 year old little Radio Shack mixer which is connected to a Pioneer 100 watt stereo receiver which has a set of Alesis studio one monitor speakers connected. When I'm doing tracking, mixing, etc. with my DAW, I use Sennheiser 280 pro headphones connected directly to the interface.

@foreversisters23 Год назад

Very helpful thank you!!

@yanh4386 Год назад

very informative...Thanks!

@MrSoulMonk Год назад

Great explanation. Thank you! I have a Pioneer FLX4 mixer that only has RCA and I bought the Presonus E3.5 XT speakers that have RCA, TRS, and XLR. I am trying to figure if I need a DI box to get a balanced output before connecting to the speakers to avoid distortions.

@vozevangelicamundial1916 Год назад

Excelente explicacion!

@timbuiepiano 2 месяца назад

Thank you, sir! Great video. You explain where even I get it! Again, thank you!

@LexGear 3 месяца назад

Very helpful. Thank you.

@1428MediaInc 2 года назад

Nice video man! Thanks a lot!

@shortsbeatsstudio 2 месяца назад

very helpful video thank you sir ❤

@andrewp1513 2 года назад

Very timely, thanks Jordan. Was thinking about ways that I could hook my mix pre 3 up to my HS5’s. Tell me, do you ever use D.I. Boxes for anything like that? I’m thinking it might be a good way to get signals from a mixer to a consumer recorder. Cheers, Andrew

@kettnercreative 2 года назад

Yeah. It’s viable. It works!

@ALMediaOfficial Год назад

Thanks for sharing, really helpful video and the best on setup that I've seen with the Focusrite Scarlett to speaker monitors! So the Focusrite interface doesn't need a separate power source itself? Is that powered through the USB-C cable from your computer?

@driveramd12 Год назад

You are amazing, and life saver!

@MetalGamer666 7 месяцев назад

Thanks for the very helpful video! My speakers don't have 6.3mm jack input, and my audio interface (Scarlett) only has 6.3mm jack output. But my speakers have RCA input, so now I have to find somewhere to buy the correct cables. Hopefully I don't have to order online, or I will have to wait for several days before I can use them!

@mudstuff 2 года назад

Great, clear explanation for cabled connections but I was hoping you'd go more in depth on the wave xlr. What if I want headphones AND speakers? If my speakers have usb, I'm assuming I connect them to the pc and I can map them to the 3rd toggle on the wave xlr? So I would have mic, headphones and speakers all controllable via the dial? I'm interested in doing it this way so I can use the wave xlr dial to control my speakers while video editing but if I was to receive a call, I could tap the capacitive mute button on the wave xlr and then put my headphones on. Is that possible? I know people have assigned usb mics to the mic channel on the wave xlr so I'm assuming USB speakers could be assigned?

@Arkiki782 6 месяцев назад

Very helpful. At first am afraid to connect from interface headphones out to rca speaker

@atidchannel25 7 месяцев назад

very informative video sir i learned alot on this video thankyou 🙂

@funnybone7705 2 года назад

well structured and very informative, even for non beginners. i asume the same rules go for live performances with audio interfaces? thx a lot, guys and gals!!!

@philiphan6997 2 года назад

Great video. Not sure if I missed it or you covered it, I'm trying to connect powered speakers (JBL 306Ps) that only has XLR and TRS connections to my Yamaha A/V that does provide RCA Audio Out (1 left, 1 right). Will a RCA to TRS/TS cable work here? Also, would they be pre-out connections from the AV and not from speaker outs?

@SilverthorneA27 Год назад

This guys awesome!

@shibukkurup7927 7 дней назад

Thank you bro

@jimmyhooks 2 года назад

Kettner, looks like my Scarlett Solo interface only has the 2 small red & white (RCA I think) inputs on the back, where it says "Line Inputs". To use balanced TRS cables, I'd need to get adapters for those red & white line inputs?

@maireadaine1635 Год назад

I’m wondering... just so I’m sure! Do the balanced 1/4 TRS connector cables used with your interface, work as an input into your pc for recording vocals / vocal with guitar etc? :)

@JatinNagpal1 23 дня назад

Thanks!

@nothingaroundus_ Год назад

Thanks for making this

@kettnercreative Год назад

You're welcome.

@unviajerocubano Год назад

thanks!

@richardhood4512 2 года назад

Is the same method used here for playing live in a club? For example, simply provide 2x TRS cables from the interface to the engineer at the club? Then you monitor yourself from the headphone jack in the interface? Probably yes, but just checking.

@EarDrumBeatz Год назад

Hello bro. Please do u have a video on connecting and audio interface to a stereo reciver so i can use my passive speakers with my behringer uphoria 404hd

@b3l3th56 2 года назад

thank you

@nolonkillik6169 2 месяца назад

Every day is a school day they say,.Thank you for a well presented and informative video. The simple little things we take for granted in life like Red(for Right) and Black(for Left). Call me stupid if you will (but i'd rather you don't).. but I never gave it a second thought or taken any notice in the past..until now..it is fair to say..I have learnt a lot..Good luck..and well done to you.

@Howtofewithlove Год назад

Thankyou!!!

Год назад

those balanced cables are normal trs stereo cables?

@cowboy7x 2 года назад

Thanks. Helpful. Do you have a video for an A/B switch when you are running two or more sets of monitors?

@kettnercreative 2 года назад

Not yet!

@BooRat-ep5rn Год назад

I think you are the right guy to ask, how do i connect my mixer which has a ts/trs output directly to passive speakers which has + - poles?

@Midsouth-Drone-Photography Год назад

Nice video

@bockariekargbo4862 11 месяцев назад

Helpful

@phoenix063071 2 года назад

I always understood that the balanced tip was for stereo connects. Never knew it had anything to do with the hissing or humming sounds. I've been always connecting unbalanced cable to right and unbalanced cable to left. I need to get my education in check. Lololol Cheers !!

@kettnercreative 2 года назад

Aha. A balanced cable can be used two ways: 1) Stereo, Unbalanced 2) Mono, Balanced It depends how you're using it. Glad you found the video helpful!

@SimpliAlex Год назад

Can i connect 2 monitors but also a headphones to the scarlett 2i2? so i can just quick switch from listening from the monitors to listening from the headphones?

@ronwess Год назад

Not sure if this requires same method but can you connect klipsch monitor speakers to a receiver? Thank you in advance.

@tuckerjeffrey 2 года назад

Does this preamp work or connect to the newer apple computers running OS Monterey and will it connect via USB-C because that all that available on my M1 Max MacBook Pro that connects to my XDR Display? Hope you have time to answer. Even on Amazon they don’t show a photo of the rear of the unit leaving everyone including me how the Dac connects to the computer

@aliwanagph 2 года назад

How about a 3.5mm headphone output from my audio interface to the 3.5mm input say a soundbar? E.g. Revelator IO24 to Mackie Stealthbar. Will it still function with stereo separation?

@aatone4530 2 года назад

Would a scarlett solo work ? Or would i need the 2i2? Thanks

@AllanGyllingOlsen 2 года назад

Can I Connect a rekord player to the setup as Well ?

@Nathlaaar Год назад

How do I do this with passive speakers and an amp?

@Fiveash-Art Год назад

I'm going to use this information to connect my balanced cables into this new batch of cornbread I made.

@wernerunterberger7952 9 месяцев назад

I wont to know how can I connect a Audio Interface with the Boss Katana 50 MK 2, is the Line Input or the Power Amp In- Connection the right way. Thank you for helping

@brandonlazo Год назад

Hello! I have a ssl2+, I want to connect speakers with xlr to xlr, but ssl2 doesnt have xlr output just xlr input. Can I connect speakers to xlr inputs? Or buy trs cables to connect propperly to trs outputs?

@oddmentings Год назад

Is there such a thing as a male-male mono balanced 1/4” to RCA? Or would it be necessary to have two Y cables, 1/4” balanced to 2 RCAs, with each leaving an unused RCA connector? I’m prompted to ask by the possibility of connecting to a tube amp with RCA inputs (which outputs to unpowered speakers) from an interface like the Apogee Ensemble, which has 2 1/4” monitor outputs, or from an RME Fireface 802 1/4” DA line out (6.3 mm TRS jack, servo-balanced)

@ottomanbeatsofficial Год назад

How do we connect interface to the computer ? With the aux cable to line in?

@yusahara Год назад

If I'm just using a mic to record, or even just to do live performances in a small enclosed space, will I need amps or anything like that?

@korhansoydan Год назад

can I use a pair of monitors for two computers? (both have individual audio interfaces plugged in)?

@peterpowell5189 2 года назад

does anyone know a good work flow to connect 4 studio monitors to an apollo twin? It's strictly for volume purposes. I know I won't be able to control the volume.

@DizNutsTV 2 года назад

how can you connect a subwoofer on the audio interface and the speakers.?

@hobonickel840 Год назад

Thanks for helping us newbs... Is a speaker cable needed with these active monitors or should I say does actual speaker cables have any benefiit over standard guitar/instrument trs cables ?

@starrguitargoddess 5 месяцев назад

Good question !

@SDTypeO Месяц назад

Is there a good solution if you want the same monitor speakers for 2 computers without having to unplug and switch each time? Id like to use the same ones for both comps and haven't found good workaround. Any help is appreciated!

@nidznidxxxmusic2873 2 года назад

How to connect to old hifi systems plz? Like Aiwa

@shadowcat3811 4 месяца назад

Can I connect my audio interface output with a 3,5 mm TRS USB-cable to my cdplayer? I have a Sony HCD-SBT100 sound system and a presonus studio 2/6 audio interface.

@sameerahmad.247 2 года назад

Hey Kettner....I like your video about audio interface..Thanks for clearing information. its very helpful. I have a question to ask. We have two Rode Podmic and we are looking for good interface to set up what would you suggest us ? please answer our question.

@kettnercreative 2 года назад

I would go with a SSL2+ ( currentprice.io/ssl2_plus )

@sameerahmad.247 2 года назад

@@kettnercreative Is it better than Scarlett audio interface? Do we need cloud filter with SSL2 as well?

@neonhills Год назад

What do i need if i want to connect 8 studio monitors together in one room from the same stereo signal ??

@brassmoonrealtylevi5270 3 дня назад

I purchased the scarlett solo interface. What software do you guys use? I use Caster a free program. It seems to take a lot of Ram so I m looking for something that is a little less robust.

@josephallencherril3198 2 года назад

A very good presentation. In the method 5, 6 & 7 you connected the cable to the back of only one speaker on your right, what about the other one on the left?

@kettnercreative 2 года назад

Great question! I'm glad you asked this. For this style of studio monitor, both connections happen on one speaker (left and right). You can see the speaker wire that sends the right signal to the second speaker. (red and black, it was already connected).

@josephallencherril3198 2 года назад

@@kettnercreative Thank you very much.

@brookspleninger 2 года назад

What do you do if each speaker has a single unbalanced rca input? I’ve got a pair of JBL LSR26Ps. TIA

@philiphan6997 2 года назад

@@brookspleninger You probably need to find and RCA audio L/R output on your source. Or whatever type of audio output jack you have will need to be split to L and R to RCA.

@Digmen1 8 месяцев назад

Hi I already have some Logitech speakers attached to my computer to play Mp3s through. I just bought a Focusrite Solo audio interface so that I can record my guitar. It looks like I now have to buy some powered speakers. This is quite expensive for me at the moment. Is there a good budget option just for a small bedroom for speakers. If I buy some powered speakers for my guitar, can I then use them to play my music mp3s through, so that I don''t have to have so many speakers in my room?

@nikakublashvili1817 4 месяца назад

the question is does it sound good??? is it enough to get a good sound? as i know user interfaces have pre amps built up inside which does not have current to drive speakers very well

@vaniguwap29 Год назад

i bought a jbl mk 2 series 3 monitor. it’s only one. i used a balanced cable trs to trs and it just won’t play. i plugged it in to the left output on the interface and didn’t work. i put it in to the right output on the interface and it still didn’t work. could you help ??

@franklam5687 Год назад

Anyone can help ? I'm using MacBook air, how i should connect HS5 with 3.5mm headphone jack so as to producing powered audio ? Thanks in anticipation.

@jaysjourney4518 Год назад

Could you plug your audio interface into a guitar amp combo?

@baneverything5580 2 года назад

So do I HAVE to get a PC to connect a mixer for livestream musical performances or is there a way to use a Chomebook?

@kettnercreative 2 года назад

I don't see why you couldn't use a Chromebook. You'd need to install the drivers for your mixer - but it should work.

@dickydarmawan99 Год назад

but should i have an soundcard for speaker monitors?. i produce EDM music which is not really need audio interface.

@killaysus 2 года назад

Does using TRS cable elevate the quality of the sound? As in does it make a difference?

@kettnercreative 2 года назад

Sound quality is the same, but less hiss, buzz, and interference.

@TGBaker 2 года назад

I have 2 MK ll JBL series 3 powered monitor speakers. Is there a DAC that I can use to hook to a Newer Sony OLED TV. I don’t wanna invest in a Soundbar !