7800x3D + 4090 FormD T1 Build | My Endgame PC

Подписаться 1,5 тыс.

Просмотров 53 тыс.

50% 1

See this build in action or ask questions / jeremiah
⬇️All parts in my build⬇️
CPU: AMD Ryzen 7800x3D - geni.us/7800X3D
CPU Cooler: Thermalright AXP90-X47 Full Copper - geni.us/X47Cooper
Thermal Paste: Kryonaut Extreme - geni.us/Paste
Motherboard: Asus Rog Strix X670e-i - geni.us/X670EI
RAM: G.SKILL Flare X5 32GB DDR5 6000 - geni.us/DDR5
Storage: Samsung 980 Pro M.2 NVME 2TB - geni.us/M2SSD
Graphics Card: Nvidia 4090 Founders Edition - geni.us/4090FE (Also check BestBuy/Nvidia/local stores)
Case: FormD T1 (v2.0, Sandwich, Black, Steel Side) - formdworks.com/collections/t1-1 or fmdworks.com/collections/t1
PSU: Corsair SF750 - geni.us/SF750watt
Case Fans: Phanteks T30 (x2) - geni.us/T30Fans
CPU Cooler Fan Swap: Noctua A9x14 - geni.us/FanSwap
CPU Foam: Noctua NA-FD1 - geni.us/FanDuct
Custom Cables: DreamBigByRay - www.etsy.com/shop/DreambigbyR...
As an Amazon Associate I earn from qualifying purchases.
Discord - / discord
Timestamps:
Intro/Parts - 00:00
Building (Pre Case) - 02:37
Building (Case) - 06:02

Опубликовано:

28 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 151

@JeremiahsTech 8 месяцев назад

See this build in action or ask questions twitch.tv/jeremiah ⬇All parts in my build⬇ CPU: AMD Ryzen 7800x3D - geni.us/7800X3D CPU Cooler: Thermalright AXP90-X47 Full Copper - geni.us/X47Cooper Thermal Paste: Kryonaut Extreme - geni.us/Paste Motherboard: Asus Rog Strix X670e-i - geni.us/X670EI RAM: G.SKILL Flare X5 32GB DDR5 6000 - geni.us/DDR5 Storage: Samsung 980 Pro M.2 NVME 2TB - geni.us/M2SSD Graphics Card: Nvidia 4090 Founders Edition - geni.us/4090FE (Also check BestBuy/Nvidia/local stores) Case: FormD T1 (v2.0, Sandwich, Black, Steel Side) - formdworks.com/collections/t1-1 or fmdworks.com/collections/t1 PSU: Corsair SF750 - geni.us/SF750watt Case Fans: Phanteks T30 (x2) - geni.us/T30Fans CPU Cooler Fan Swap: Noctua A9x14 - geni.us/FanSwap CPU Foam: Noctua NA-FD1 - geni.us/FanDuct Custom Cables: DreamBigByRay - www.etsy.com/shop/DreambigbyRayMOD?ref=yr_purchases As an Amazon Associate I earn from qualifying purchases.

@CAMOBAP795 5 месяцев назад

Thanks a lot maybe you can expand "Custom Cables" section to suggest exact cables and preferred length for this build? Thanks in Advance

@kurosagii1 3 месяца назад

also wondering which are the custom cables set up got from the etsy stores

@benbencai8208 Месяц назад

Why the copper colorer cooler? And not the black version?

@faidzfahmy5588 7 месяцев назад

Mate, this is exactly what I wanted to build. My T1 just arrived a couple days ago and I was looking for the right air cooler. Thanks! 😊

@jonvice1217 5 месяцев назад

how long did it take to arrive?

@baca431 2 месяца назад

what temps are you running at with the cpu cooler?

@jarods9908 Месяц назад

So I've been looking around at a bunch of T1 builds, and yours is one of the cleanest! Copying this build minus a couple small things! Thanks!

@palps797 Месяц назад

You should check out optimum tech if you are interested in itx builds, his stuff is not possible to copy for a lot of people but he makes some of the most fascinating itx builds

@petvaan 2 месяца назад

usually i just skip through pc build's but for this one i just had to admire the production quality! great build man!

@ghost-type 7 месяцев назад

Bro, the quality here is way higher than your sub count Great job. This T1 looks great. I have something like this in mind for my next built. This helped me make up my mind to change over to AMD for my CPU. I've had the same i9 for years and need something beefier. btw, you might want to update the T1 site link to their new site. The old one is no longer updated.

@SleekEmu 3 месяца назад

Excellent build video, would be very interested to know more about the gaming CPU temps. Very therapeutic, nice job!

@officialnovadrome 2 месяца назад

crazy production quality - keep it up

@palps797 Месяц назад

It’s really good, but he dose need some more lighting because in some shots it’s really hard to see

@ampfyYT 8 месяцев назад

lovin this tech tent!

@JeffHardware 6 месяцев назад

Great build 👍

@RobloxianX 3 месяца назад

the fact that you can make the most powerful possible gaming rig this small is insane

@Pikiks 3 месяца назад

Wow I just found your channel and I love it!

@fez748 6 месяцев назад

Nice video just finished my t1 build. Same as yours with a 240mm aio and love to see that it can be air cooled too

@Druskqq 2 месяца назад

Thanks for this video, I finished my build because of it. Might post it someday on the formdt1 or sff subreddit

@angele1063 4 дня назад

Beautiful build

@AdrianLi123 16 дней назад

Switching from Meshlicious to T1 in a couple days. I have almost the exact same components like yours (except the PSU using CM's 1100w unit). Appreciate the super detailed walk through of the whole build!

@samhaines7644 3 месяца назад

would love to see some benchmarks/temps

@booyaaaaaaa 18 дней назад

Holy thermal paste!

@martinmyung4710 6 месяцев назад

Nice video. I think that the effort in making the seal for the cpu cooler is worth it. It's a SFF build and that air cooler is tiny, 3-4 degrees is huge considering those factors.

@the12gaugeshotty 25 дней назад

Nah, 3-4 degrees of CPU temp drop is totally moot. If you really want to drop temps because they might be too high, then undervolting works wonders.

@WilliamD23 8 месяцев назад

This build is so nice

@_roob 7 месяцев назад

nice build, gz

@ethanschwake4369 3 месяца назад

The build looks incredible man! I'm planning out a T1 build with a 4070 ti super and a 7800x3d. How are temps on yours under load in this config?

@Nolman Месяц назад

Definitely going to consider a ITX for my next build

@cruzez1 Месяц назад

After seeing many videos, this one Im convinced enough I can build my own without any custom cables, sockets n div 😀... Just order parts and assemble.

@red-moto 3 месяца назад

How are you liking the cooler setup? Would you make any changes now? Feel like the foam seal is needed?

@baca431 2 месяца назад

Clean the build bro but what are the temps looking like while idle and in games?

@shusui9665 2 месяца назад

nice and informative video thx. for the brute forcing the black straws, do you use one straw for each hole or do you take 2 staws and combine them. didnt understand that thx for the help

@sebi5006 4 месяца назад

What a dope build! Anything you would do differently today? Like any other parts or would you still recommend everything? I'm currently thinking about getting my endgame PC :)

@boo43568 7 месяцев назад

Looking at doing the same build but with the proart. What did you specify for the cables?

@user-ue6nd6yx6s 3 месяца назад

Hiya, love your build and tring to replicate it. my only question is there a 7 mm gap for noctua's offset mount? thanks.

@HackSparrow8 6 месяцев назад

Could you just glue the noctua fan foam instead of messing around with the straws? Hot glue or something like that. Very nice build, probably going to copy it!

@JeremiahsTech 3 месяца назад

i thought about that or zip ties

@tastyham 5 месяцев назад

What's the difference with or without the seal? Does it make a big difference or running without it would be fine? It seems hacky to do it unless there are better ways

@miljiro 5 месяцев назад

Any extra turbulence noise from fans being up against the side panel mesh?

@nintendosaur 7 месяцев назад

any optimizations done to the CPU?

@andrewmoon26 2 месяца назад

For some reason i doubt that cooling will be sustainable for long. Could we please have a temp review?

@bt_golf 7 месяцев назад

Subscribed! Looking to build something similar, is this build loud? awaiting a 4090 🥲

@OstriChicken 2 месяца назад

How are things holding up? Did you do any power limiting to rhe GPU?

@Darth-TBAG 2 месяца назад

I have the same exact cooler as you but I’m planning to use buy the Noctua duct with the stock fan… how did you manage to squeeze it in with the fan clips 😅

@calebl1919 6 месяцев назад

What exactly are the temps getting for the cpu in game?

@danielsuarez8647 3 месяца назад

I want to see the temps while gaming

@beebssqueebs3843 3 месяца назад

that cooler is pretty unreal for the price. cools my 7800x3d like a freaking champ!

@red-moto 3 месяца назад

No issues at all? Any reason you went with it vs a Noctua L12 or others?

@beebssqueebs3843 3 месяца назад

@@red-moto I orginally had a Noctua NH-L9a but it just wasnt cutting it and that was on a less powerfull Ryzen 5 7600X. When I swapped to the 7800x3d I decided to try the Thermalright and it's just very impressive so far. CPU never goes above 72 degrees while gaming at 1440p Ultra settings and my build is in a Fractal Terra case.

@liveunfurled2497 3 месяца назад

@@beebssqueebs3843Did you keep the stock fan on it? Did you consider the Noctua L12 at all?

@beebssqueebs3843 3 месяца назад

@@liveunfurled2497 yeah stock fan on it. I did consider that cooler but the Thermalright came in at around half the price and with the performance I was looking for. I'm sure the Noctua L12 works great too, I just currently I don't have experience with it. The full copper Thermalright AXP90 X47 has impressive performance for it's price that's for sure.

@farr1260 2 месяца назад

@@beebssqueebs3843 Im going for the 7800x myself for a new build was wondering did you undervolt the cpu to get to 72 degrees?

@itsSwagPrince 2 месяца назад

Quick question when you move the ssd do you have to delete it ? Or reset it or something ?

@DavidGarciajrtx 3 месяца назад

What temps?

@glowingplace7129 Месяц назад

when i clicken on your video i thought u were optimum of how good u are and have a similar pc and didnt realize till the end of the video

@Mijuel. 2 месяца назад

Is the foam/sealing section necessary? I don't know the logic behind it is all and I plan to build this exact PC but with a MSI Ventus 3X OC 4080 GPU.

@cognacbrown 9 дней назад

This aircool method might be better for GPU temps. I have the exact setup but with a 240mm AIO. But I find the temps of the 4090 in this setup too high. Goes up to 84c on high gaming load. So I switched to a larger MATX case with more fans and the high temps go to 60-70c. Btw, I live in a hot climate country where ambient room temp is around 25-30c

@OmniVisionElite 3 месяца назад

Do you think you could provide a link to the 3D printed GPU bracket for support? Im having trouble finding one that works with this case.

@arnoldalfox 5 месяцев назад

are you using stock mobo backplate?

@jawidheylel9198 3 месяца назад

Can you propose another case for all these components because yours is not available anymore on the site there's v2.5 but not v2.0

@Jason_Pi 2 месяца назад

PSU is placed just in front of VGA fan. Is it OK for heat management inside of desktop??

@_roob 5 месяцев назад

Brother, you can request the purchase of the titanium panels separately, I did that, I bought the titanium first and requested the purchase of the black panels through fmdworks support, everything went well, they are sending them to me.

@Mattia_SX_ 4 месяца назад

How good the temp are with axp90-x47 full?

@meteor1522 14 дней назад

Doesn’t 4090FE’s button exhaust fan face back of the PSU?

@A.H_610 Месяц назад

Does the same case with 2.5v would work with air cooling or shouldI stick to the 2.0?

@ELpadre10220 4 месяца назад

Will this run a vr headset?

@Deadfaisal Месяц назад

how is the temps of the cpu on overload

@royimarcx 2 месяца назад

Hey, saw that you used some standoffs for the PSU, were those included with your T1 or did you get them separately?

@GoldFus1on Месяц назад

Included

@Illcur 3 месяца назад

@JeremiahsTech Why not use the axp90-x53 so you dont have to use so many foams?

@JeremiahsTech 3 месяца назад

turbulence

@OmniVisionElite 4 месяца назад

How is the heat though? Could you render 3D visuals with this?

@Alp577 3 месяца назад

Not the same case, but I run a similar build at 11 liter on A4 H20. Hottest for the 4090 was 75 while renderering and 7950X3D at 82. Edit: Forgot to add I have a 240 AIO. But 7800X3D runs cooler so air cool with Noctua L9 is no problem..

@rafaelmarangoni Месяц назад

How do temps do after an hour gaming? (e.g. cyberpunk at 4k w/ path tracing and all)

@kuzzzzzzzzzzzz7511 7 месяцев назад

It can handle the 7800x3d?

@mvargasmoran Месяц назад

what version of the T1 is this?

@xescdelarosa3328 6 месяцев назад

How much gpu clearance do you think that there is? I have an rtx4090 gallardo (351mm of length) so im afraid it wont fit. I have it in an nr200 build but im not satisfied bc its still too bulky to actually be "mobile".

@eternaljoker99 6 месяцев назад

The 4090 FE is 304mm and is close to maximum length in the FormD T1. The closest alternative to the FormD T1 is probably the Dan A4-H20 and that one has a max length of 322mm. You're probably going to struggle to find a case smaller than the NR200 that will comfortably fit a 350mm+ card without modding.

@Gambit33 5 месяцев назад

Beautiful build with top components. I'm copying this for my 2024 build, if I can order the case and a 4070 Ti Super. How's the temps with the Thermalright AXP90-X47 Full Copper on a full gaming load? That's the only thing which is worrying me.

@ahmadbadruddin 3 месяца назад

hey im to to itx here but what is the purpose of the foam for the fan on the last part in the video?

@The23rdMacro Месяц назад

it prevents the cpu from getting recycled air in this scenario but if the fan was too close to the side panel mesh it can lower the (turbulence) sound it makes when pulling air through the mesh

@ZimmMaster 6 месяцев назад

What cable lengths would you recommend for a Corsair SF1000L SFX-L PSU?

@Dawelio 3 месяца назад

Most likely won't fit with fans at the top with an SFX-L, will interfere due it's longer size unfortunately.

@ZimmMaster 3 месяца назад

@@Dawelio Thanks for the reply! I've actually got custom cables coming that will work. I completely forgot about this comment. But I appreciate you

@Dawelio 3 месяца назад

@@ZimmMasterThat's no worries, I only just replied yesteday to your 2 month old comment so no worries at all. Hope your cables will serve you well :)

@mvargasmoran Месяц назад

hello 👋 how bad is the ASUS mobo? I've been hearing awful stuff from ASUS. have you had any problems?

@ShoOoet_1812 3 месяца назад

Hey there just wandering, was it possible to fit a 240mm AIO with the 4090 ?

@baca431 2 месяца назад

Yes you can

@baca431 2 месяца назад

You would need to change the fans to some thinner fans on the AIO tho

@kamilk6807 3 месяца назад

How did you know what cpu cooler will fit. I'm looking at 4800super and i don't know how to guesstimate if it's 3 or 3.5 slot

@The23rdMacro Месяц назад

if im not mistaken its a 3 slot i have the 7900xtx and it doesnt fit in the A4-H2O without forcing it even then the side panel wont close with it installed

@broncofun5636 3 месяца назад

Any issues running an RTX4090 with a 750W PSU? Did you try running Cyberpunk at max settings to see what draw you get?

@Dawelio 3 месяца назад

No, there's no issues. Basically every build in this case uses the Corsair SF750 with 4090's and it has been proven time and time again that it's just fine.

@broncofun5636 3 месяца назад

@@Dawelio Don't you need 5 PCIE power connectors on the PSU? 4 for the 4090 and 1 for the motherboard/CPU? the 750 only comes with 4.

@jboy1757 6 месяцев назад

Can a 280mm air fit on top?

@matthewrezuke8130 6 месяцев назад

240

@SaadKhanAhmed 3 месяца назад

I will be completely lost what goes where lol.

@MrEduard2009 3 месяца назад

is 750W PSU adequate for a 4090 video card??

@kareemreviews 3 месяца назад

Yes, if you used your cards right.

@jonvice1217 5 месяцев назад

why not 3.25 slot? what are the benefits of doing 3 slot mode? and if its the psu, how does that benefit the build?

@ig7036 5 месяцев назад

3.25 slot mode brings the 4090 closer to the side panel causing turbulence you can hear it

@jonvice1217 5 месяцев назад

@@ig7036 ooooo ok

@Dawelio 3 месяца назад

@@ig7036Wait what?... 3.25 slot means more GPU space and less CPU space. Hence moving the GPU further away from the side panel, not closer to it.

@Dawelio 3 месяца назад

The reason is due to 3 slot is what the FE model is and that will maximise the CPU cooler height compared to 3.25 slot. It's already tight with 3 slot mode, will be almost impossible to find a suitable cooler with 3.25 slot mode. You'll most likely need to sacrifice on the CPU choice if going smaller cooler and at that point, it will more and more bottleneck the 4090.

@jonvice1217 5 месяцев назад

i ended up getting the 2.1, going with a simlar set up. did i mess up?

@sebi5006 3 месяца назад

Did you? Thinking about getting the exact same setup he use. Will the 2.1 version of the t1 work?

@jonvice1217 3 месяца назад

@sebi5006 worked out great :) Definitely label the screws before

@sebi5006 3 месяца назад

@@jonvice1217 Good to know, thank you!

@bionis4980 2 месяца назад

Did you get the exact custom cable lengths like in the video ? Because I ordered and am afraid that they wont work with the 2.1

@cendolbang99 6 месяцев назад

no temp test?

@devilsuport 6 месяцев назад

@@nichronos Yes it does if you do all core workloads for a long period of time. Just gaming (20-22celsius room temp) gets you 72celsius or less.

@denisgsv 3 месяца назад

did anyone do the math ? how much this comes to

@arjogbrl 6 месяцев назад

how are the temps going?

@Sabakoe737 6 месяцев назад

@@nichronos bullshit. the axp90-x47 keeps the 7800x3d cool.

@Sabakoe737 6 месяцев назад

@@nichronos where did hou get your information?.

@carl4713 6 месяцев назад

@@nichronos Test it again, but this time try applying the thermal paste first.

@Sabakoe737 6 месяцев назад

@@nichronos You don't know anything about computers so don't come and talk nonsense here. Otherwise, place an air conditioner on your CPU and you will get temps of -10c

@Sabakoe737 6 месяцев назад

@@carl4713 its nonsense. I have 2 build with the same cooler. Load temps 60 c - 70 c its perfect

@fhiko6226 7 месяцев назад

What are your temps?

@JeremiahsTech 7 месяцев назад

CPU- high 60s to mid 70s GPU- high 50s to low 60s

@bionis4980 Месяц назад

@@JeremiahsTech quick question, did you adjust any fan curves, or is cha fans based on gpu temps all you did ?

@Blacksadify 6 месяцев назад

Can this be outfitted with a 240mm AIO on top in sandwich layout? I was going to use the same cooler and my liquid cooled 4090, but haven't seen anyone with that setup as of yet.

@seankillar123 6 месяцев назад

Check out devyn Johnston he has a build

@calebl1919 6 месяцев назад

⁠@@seankillar123great recommendation bro! So cool to know other people watch the same people I do. Devyn Johnston is so underrated

@orionou4449 2 месяца назад

why does eveyone build it upside down

@GoldFus1on Месяц назад

That’s the og way but on their website it’s the flipped version

@franksam8610 6 месяцев назад

Glad I jumped on my 4090fe for 1440 dollars a month or so ago

@the12gaugeshotty Месяц назад

Endgame? So you are never going to upgrade or build anything else?

@gmacklit09 6 месяцев назад

How is a 750 watt power supply enough for this

@ZioComposite 6 месяцев назад

Most sffpc builds under volt the hardware. Rarely do they ever "max" out/overclock.

@whitecrowuk575 5 месяцев назад

4090 typically uses under 450w and that cpu under 80w so easily. PSUs are rated for constant power and can take higher temporal power spikes

@Dawelio 3 месяца назад

@@ZioCompositeEven without said undervolt, it will still be enough. These days CPUs and GPUs are already at their max out of the box, hence the days of actual overclocking are gone. The 7000 series from AMD and 4000 series GPUs from Nvidia are very efficient architectures, hence not pulling a lot of power. The SF750 is Platinum rated and can even go further than 750W as well.

@NietzscheanMan 6 месяцев назад

Do they still produce this case?

@mannyc19 6 месяцев назад

Yes, I just got mine in black today.

@NietzscheanMan 6 месяцев назад

@@mannyc19 interesting, on their website it seems to be completely out of stock :/

@mannyc19 6 месяцев назад

@Dawelio 3 месяца назад

@@NietzscheanManKeep in mind that there are essentially 2 different versions of the T1, there's the original T1 from FormD, the original designer still runs this. But there's also the NCASE T1 V2.5, which is essentially is the marketing guy from FormD that went to utilize NCASE's manufacturing process instead. There's been QC issues with this and that case isn't manufactured to the same standard as the original FormD T1 V2.1. Being aluminum side panels, whereas the FormD 2.1 uses full CNC'd side panels if chosen. Much higher quality and in my opinion atleast, looks a lot more clean and sleek.

@NietzscheanMan 3 месяца назад

@@Dawelio comfusing. Which website is the right one? I saw there is a 2.5 now.