7mm PRC Reloading: What You'll Need

Подписаться 360 тыс.

Просмотров 67 тыс.

50% 1

Full Story: bit.ly/3DnwwFb
UR on RUMBLE: rumble.com/ult...
UR T-Shirts: bit.ly/2UEAkgW
UR on Patreon: / ultimatereloader
Want to know what it takes to load 7mm PRC? I'll walk through that in this story!
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this RU-vid channel (gavintoobe).
Any reloading data supplied on this RU-vid channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this RU-vid channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
Hornady
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereload...

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 130

@hmoobshow2482 Год назад

Flexing with that 8 lb Retumbo that’s wort more than gold! 😂

@n8o8n Год назад

Haha.

@deaniverson4671 Год назад

Lol that’s exactly what my wife said!

@JupitertheGiant-qe7ir Месяц назад

My first loads with 7mm PRC used 162 gr and 175 gr ELD-X bullets shot from a Browning X-Bolt Max Long Range OD Green. At 100 yards, I saw a 3-shot group of .223" with the 175s at a grain under max load for H4831SC. I also printed a 4-shot group with the 162 gr ELD-Xs of .459" with H4831SC right at the 3000 fps mark in the Hornady data, and I did that to sort of duplicate a 7mm Rem Mag load. I kept my shot counts low to save components and barrel life, plus my rifle uses a 3-round magazine. I did combat load my X-Bolt for the 4-shot 162 gr test group of .459" with three in the mag and one in the chamber while keeping my cheek weld consistent. I'm impressed with the initial accuracy, the smoothness of function, very few pressure signs (I also used CCI 250 primers, observed mild flattening), and the relative comfort of a Recoil Hawg muzzle brake. I'm going to see how well I can fit loads in the magazine that are out close to the lands which does have some extra internal space.

@daviddemand6856 22 дня назад

I’d be interested in your 4831SC charge numbers as it seems the Hodgdon manual is a bit conservative on max in relation to pressure. I dropped to a Berger 168 VLD to get a bit flatter trajectory by picking up velocity with a 22” Bartlein CFW 5R configuration. Seeing several testing 4831SC at 64-66, with no pressure signs. My intent is to get to 2900-2950 with those 168’s.

@JupitertheGiant-qe7ir 22 дня назад

@@daviddemand6856 static.hornady.media/site/hornady/files/load-data/7mm-prc.pdf

@larryweldon9270 4 месяца назад

June 2023 found out about this cartridge - Mossberg Patriot was reviewed well so I bought that and a Burris Veracity PH. The rifle couldn't group well so in February I sent it to Mossberg. New barrel (no charge) - now I get .6" groups and ring the 8" gong at 500 yards every time. Couldn't be happier!

@kerryfalls3292 4 месяца назад

I also bought a Mossberg just to find out if the 7mm prc was as good as it sounded, and it is! Put a radial muzzle brake on it and it shoots really light, loud but I take my hearing protection with me anyway.

@bobmcmillen4502 Год назад

I know this is old but I thought I’d throw this out. I bought the least expensive 7 PRC I could find. A Mosberg Patriot. It shot so well I went and bought a second one for my son. 65 grain H4831SC. Tuned that load to .25 w 175 Berger. 2nd Rifle like RL 22 64.5 grains. Also .25 moa. Best $425 I’ve ever spent. Twice. It’s cold out. I’m getting 2915fps out of both loads. 24 inch barrels w EC Tuner brakes. Thanks Eric Cortina! I usually do a seating depth test then tune that in w the tuner.

@kyleaubu Год назад

I'm so ridiculously excited about this cartridge. I'm barrel shopping right now.

@don_kandon6006 Год назад

Most practical would be something in 22 inch integrally suppressed barrel (suppressed but no can sticking out), with a folding stock... it would make a rifle that fits into bagpack. Probably 7-5lbs when fully equipped and loaded. Shooting either 180 eldm, 190 berger hybrid or 195 berger hunting pill. Out of 22, 195 should definitely be able to push in mid to high 2800s. Lapua brass and temp stable powder.

@leemannelson8497 Год назад

I’m debating on a 20” lightweight hunting build with a folding stock. Probably the biggest cartridge I would dare go light with but super versatile!

@PatriotPaulUSA Год назад

It really does look like the best of the 3 PRC but I already bought a 6.5PRC and have very little need for it here in the midwest. I'm looking at building a .375 Raptor or 8.6BLK ,Ar10 and Rem700 for large game right now. Both use .308/6.5Creed brass and .338 or .375 bullets to shoot sub or supersonic. Uses existing mags and boltcarriers/bolt faces just a barrel swap. 7MM PRC will be looking really good out west if it takes off, and brass is everywhere in a year or 3. Right now its about finding and using existing supplies for me.

@timmcfarland3311 Год назад

I noticed you’re a buy the book kind of guy, but I only use a magnum primers in the winter time. If I shoot in the summertime, you should try a regular large rifle primer. I use them in my big 300 ultra mag with 245 grain bullets and they’re way more consistent than the magnum primers.

@dinoc.5537 Год назад

Nice review Gavin. BTW, at 01:46 you mentioned the 30-06 is slightly shorter, but that is also 3.340" so with a bolt face change it will fit those actions too. I would love to hear a side by side comparison of this to the 7 LRM or the 7 SAUM when not constrained to SAAMI throats.

@dannydivine7699 День назад

I'd love to see how both the 162 and the 175 interlocks would preform in 7 PRC, or any of the conventional softpoints not necessarily just hornadys

@rickbremmer3838 Год назад

I’m hoping this bad boy takes off like mad. It’s hard to find .30 Cal projectiles because of the 300 prc craze so this will take the edge off and make the 230 grainers more plentiful. On a side note, I’m more inclined to look at the 7 prc then the other two. It’s just an interesting cartridge with some stellar ballistics. Keep up the great vids. Love the technical stuff you present.

@alexmills1329 Год назад

Since it’s the same case but shorter a 300 prc necked down to 7mm wildcat would be awesome. My big gripe with the 300 prc is that those 230-250 bullets are just a bit slow in them but they would make screamers out of the heaviest 7’s like that a tip

@billfrankwurtz Год назад

I would most be interested in the 195 Extreme Outer Limits (EOL) bullets as I had sitting in my shop a 7mm Practical (out of New Zealand based on a 300WM case necked down to 7mm). The 195 is heavy for caliber and the long and ultra long range target shooting that I want to do will use that pill to its extreme... Given what you have already shown of the cartridge, I may scrap the 7mm Practical and go straight to the 7mm PRC!

@austinsadler7259 Год назад

I would like to see how to the Nosler 175 ABLR would fit in relation to the throat. The Gunwerks guys said one of the Berger bullets they use won’t work because it’s too short.

@randyharrington3902 21 день назад

After watching your 7mm prc rifle builds, which were amazing by the way. I made up my mind on my magnum rifle. I bought the b14 hmr in 7prc. Plans of putting it in a competition type chassis. Looking forward to your opinions. Enjoy watching your content. God bless

@twissted1277 Год назад

I'm heavily invested in the 300 win mag as magnums go. and with my platform I see no reason to change. maybe later with a few years under it. I will run this. I had a 7mm mag and I found the 300 win mag to be a better fit.

@jamesmooney5348 Год назад

Yeah, be good to wait in your situation. The 300 wm is great and can be made to shoot heavier pay loads then the .284's.

@brianreynolds1574 Год назад

The Hornady book does not even show Retumbo as an option. Im glad you tried that.

@jamesmooney5348 Год назад

Slightly longer then 30-06??? -is what you meant to say? This 7mm prc is going to be bigger then the 6.5 craze. Well, I think so anyway.

@kyleschanck5945 Год назад

Thanks for all the in-site. New Remington and starting then break in. Using both ammunition you showed. Wanting to start with IMR 4831, but many things I read point toward IMR 7828SSC. Thanks again Kyle.

@micahyarlott3049 Год назад

I would buy one. If i could get powder and primers. I love my 28 nosler, and 7mm STW, and 6.5 PRC. But all of my guns are for hunting, sometimes i see what my guns can do for fun.

@sveinsoermo9883 Год назад

Blaser Custom, struggeling like h*** to find brass, Hornady bullets will also try Nosler ALR, 150 - 175 gr probably. WIll try suppressor, hopefully from A 419. Powder - Norma and Vihtavuori. Also bought a 6.5 PRC and 28 Nosler, both custom (starting to regret a bit related to the 28) - but am a 7mm adict, also have a 7 mm RM.

@dinsixiengmay9781 Год назад

The cartridge will exceed only if components for reloading and ammo is readily available and rifle as well, I'm holding off on this one for awhile, even though, I'm really super excited 😄 😊

@chipsterb4946 Год назад

TBH I stopped considering this cartridge when he got to large rifle Magnum primers. Regular large rifle primers have just become available - typically at stupid prices. I don’t have any other rifles that need large rifle Magnum primers. That said, this is the most interesting of the PRC cartridges to me. Not too small, not too big… Goldilocks would like it.

@steveelder5306 9 месяцев назад

you know you can use magnum primers in other loads that take slow burning powders? 30-06 270 even 243 and similar.@@chipsterb4946

@noahheninger881 13 дней назад

72.75gr h1000 and all good new h brasss. 168 gr Bergers smoking hot (>3100fps) basically a lazer. Fully prepped brass. 22 inch barrel… max pbr 400+ yards with 344 yard zero. 3 reloads until primers falling out of Hornady brass. Going to pink mist an elk let alone a prairie dog with the velo and twist rate here…..

@Blair338RUM Год назад

Be good to see some of the super premium bullet manufacturers come out with something heavier than 160-175grs. A Swift Scirocco in 175-180 range would be perfect for PG in Namibia.

@foonus406 6 месяцев назад

Retumbo / H1000... Large rifle magnum primers.. how hard could it be?? 🤣🤣

@foubert45 Год назад

You’ll need 61 grs of H1000, a 165 gr .277 cal projectile and a piece of 6.8 western brass

@DS-gd1xw Год назад

I'm intrigued by this cartridge. But I still like the 300 PRC

@unclebob540i3 Год назад

Great video as always Gavin. other than Hornady providing brass to yourself and other select high profile RU-vidrs, this brass is unubtanium. Just like the other Hornady boutique rounds introduced lately, it is just another boutique round "designed around a long for caliber bullet" and "long range blah blah blah" that really doesn't do anything half a dozen other widely available rounds won't do. It's cute and gives my favorite creators more content opportunity, but until Hornady puts some serious support behind it, and gets other ammo manufacturers to support it, it might as well not exist.

@daveenriquez7790 6 месяцев назад

Here we are, a year or so later. I'm seeing a fair amount of factory 7PRC 175 ELD-X Precision Hunter and 180 ELD-M ammunition on the store shelves, plus Hornady Brass, Peterson Brass and ADG brass. In fact, I just received 6 boxes of 175 ELD-X from Midway. I already have Magnum primers and powder, so things are looking better now than a year ago thankfully. Most of the factory rifles on the shelves in 7PRC are sold out though. Hopefully, more hit the shelves this late spring as they are apparently in hot demand.

@Not-the-only-one Год назад

Love the 7PRC great cartridge design. Good bye to that unnecessary belt. Seekins Havak in 7PRC is half MOA rifle.

@JeffHoman-eu2zb 4 месяца назад

Just got a Bergara Premiere Pro HMR in 7 PRC, bought 3 boxes of Hornady 180 ELDM Match ammo to break it in with & so I would have some cases to reload. About 26 rounds of factory through it, seeing pressure signs on the cases & the groups are around 1 MOA at 100 yards. Not impressed to say the least. I have cleaned, annealed & loaded 7 rounds with 180 gr ELDM's with 63 gr of H4831SC, CCI 250 primers & COAL of 3.3500. I hope this shows some improvement.

@sveinsoermo9883 Год назад

Thx for GREAT videos in general!!!

@snowman3219 Год назад

I’m actually excited about this cartridge and the results of your load development. Damn shame the component situation is still a bi#ch

@chug-a-lug6842 Год назад

If it catches on good and components get readily available I’m probably going to build this as my first fully custom rifle

@hmoobshow2482 Год назад

Not likely you’ll be finding any brass soon. 6.6 prc and 300 prc brass have been almost unobtainable and they been out how many years?

@dxpvxo711 Год назад

Good luck finding those primers for sale anywhere. Plus I haven't seen retumbo for sale anywhere for almost 3 years

@hmoobshow2482 Год назад

@@dxpvxo711 an abundance of Retumbo was hitting local and online stores earlier this year but pretty sure we won’t be seeing any for a few years. I think the last time they popped up was 5 years ago.

@John_Redcorn_ Год назад

Seems these PRC calibers are made for gun bloggers and magazine writers. None of us avergae joes are gonna be able to get components to legitimately get into one of these rounds. Just more hornady hype. Still waitin to see 6.5 prc and 300 prc ammo and brass in good stock

@scottmccullough70 Год назад

As a duel purpose rifle standpoint. Wouldn’t the 8.5 twist make it more versatile with whitetail bullet weights, 140-160 where the 7 mag has entrenched itself for so many years? Just for pure long range, I’d agree that the 8 twist and high bc’s would rule, but I honestly see that losing favor to the 6.5 prc if deer size game is the primary interest.

@stevenwinegar9355 Год назад

I'd love to work up a 180gr ELDM load around 2750 fps to maximize barrel life.

@Spartan.88 Год назад

Savage High Country 24” barrel 7mm PRC

@audieladd2476 Год назад

Regarding the 14 Press Shootout, why no Redding Ultra Mag? Would you consider doing it again with all the new presses that have entered the market and adding the Ultra Mag as well?

@waynemensen4252 Год назад

I've seen ballistic comparisons. If I didn't already have a 7 rem mag. I might consider one. 27 lbs. recoil vs. 20-23, for not that much gain. Seems like a waste of money. IMO

@USAFTACP Год назад

For all practical hunting purposes and ranges, you're right. The longer ranges is more target oriented. Is the PRC more efficient, yes. But within 500 yards dead is dead, the animal won't care.

@halfdollar86 Год назад

Retumbo will be even harder to get for a long time now because of the 7 PRC

@kurtbogle2973 Год назад

The best service you can be to reloader's today is to tell us where we can buy primers. Everyone is out!

@jtr82369 Год назад

Good deal, I have a full container of H1000 & mag primers so the most expensive part is done 😂😂

@redrock425 Год назад

It's crazy that that's not too far from the truth.

@brianlee6849 Год назад

I would love to see how it does with the lighter bullets 140 grain range. I think the super flat shooting 140 out of 7 mm would be fine for me for what I would be using it for. I don't really need to have heavier bullets for longer rain or game larger than deer. What is your opinion of the Bergara in 7 mm PRC I may be looking at getting that rifle. Thank you 👍

@kalindanley2843 Год назад

Oh snap! Let's have your parts list on both of your 7mm PRC builds. I wanna be a copy-cat. How about that X10 press from frankford? We would love an update if you have one.

@hardingdies7811 Год назад

I'm a Leftie - instead of building a whole new rifle, would I be able to rebarrel a left-hand Remington 700 in 7mm Rem Mag and be ready to go?

@hse785 Год назад

Yes

@larrymars649 Год назад

Hmmmm I Haven't seen you this excited since the .224 Valkyrie..... kinda makes me wonder

@chrisdavis4500 Год назад

Would be nice to see where the bullets sit with the chamber. I would use it with my Tikka in the long action configuration and the factory mag setup. I got a CF 8T barrel on the shelf ready to go. Was thinking about he Sherman Wildcats 7mm Mega as well.

@WHOTEEWHO Год назад

Awesome

@Ultimatereloader Год назад

Are you going to get one? 🙂

@WHOTEEWHO Год назад

@@Ultimatereloader I am broke for the foreseeable future 😆😆😆

@approachingtarget.4503 Год назад

Seems everyone is covering the PRC line up. While the longer profile of the projectile has good BC. Doesn't that increase surface area drag inside the barrel and down range? And doesn't a longer bullet have the tendency to be more prone to side winds? With approximately 300 fps separation between the 6.5,7mm, and 300. A shorter projectile would benefit all of them.

@cheatinggravity173 Год назад

You would think so- it sounds counterintuitive- but alas, the longer bullet with higher ballistic coefficient is affected by the wind less. Im not smart enough to explain why. There is a range at which fast time of flight and light bullets vs long time of flight and high bc favors lighter bullets for the same cartridge. Now that said, a longer bullet with the same weight (lead vs copper) will have a lower b.c. because the sectioal density is less, and it will be blown by a sidewind more than the shorter bullet becaue if the larger surface area.

@approachingtarget.4503 Год назад

@@cheatinggravity173 I could see that being the case at over 1800 fps. Above that the nose of the projectile creates a sonic wave that deters friction until it slows down. The rear bevel reduces drag on the projectile at all speeds. I also understand that a lighter bullet will drop less because of a few reasons. But air direction and deflection would effect the side to side trajectory. Not as much above a certain fps. But gradually over its entire flight path. A longer projectile would also hold in more of the chamber pressure in the barrel, but you also have more friction on the acceleration down the barrel. It's a horse a PC no matter how you look at it I guess. My point is that we can already achieve these same results with the already popular .30 calibers. Plenty more of them available! .308,3006,300, and 338. Why create more tooling and manufacturing when you can already do it with what you already have.?!!!

@TR-ms9zy Год назад

So does anyone know where to get this stuff? Seems like everything went to the “influencers “ instead of the actual customers. I

@devinspeth6063 Год назад

Can I use a 7 rem mag die set somehow? I can't find 7 prc dies yet.

@guyminer2384 Год назад

They'll be available eventually. Wait for the proper dies.

@InfamousTactical Год назад

I know that you likely don’t want to say a specific load. But I’m curious as to your Retumbo load. My 7RM recipe is 68.6g of Retumbo for a 180g Berger

@jamesmooney5348 Год назад

This will be the 7MM 🐐 GOAT 🐐

@WyitAlan Год назад

I would be curious to see how you would describe the recoil impulse, specifically on the bergara build. What, common place, cartridge would you compare it too ex. 30-06 7rem mag that sort of thing

@ryansones1626 Год назад

I'm all ears as well

@dhbikerczar Год назад

Who has listed load data for this? And what is the realistic (or listed) Retumbo range for the 180 eldm.

@Muschka01 Год назад

What is the powder weight of the factory loads and what powder have they used?

@Rushshooting67913 Год назад

That retumbo is worth 10000 dollars on gunripper

@jeffreywilson690 Год назад

I don't need the 7mm PRC but I do want a 6 mm PRC

@Mmikejs72 Год назад

I just purchased a CA Long Range Mesa in 7mm PRC. Starting off with the factory 175 GR Hornady Precision Hunter to get brass to reload. I am seeing pressure signs with the factory ammo. Hoping to find a reload that shoots good in my gun.

@Ultimatereloader Год назад

That's strange- we didn't see any pressure signs in the rifles we built...

@norrinradd9206 Год назад

Just get a 300 Norma. Better B.C. Better down range ballistics. Doesn't matter anyways. Can't find that powder or any Large rifle magnum primers.

@ssteereify 5 месяцев назад

Interesting your using Retumbo, it doesn’t suggest that powder in the Hornady’s reloading online manual. How many grains are you loading?

@richardturner972 Год назад

Nice vid (as is all of your content). I'm curious, if loading for 7MM PRC specifically and you had a 24 and a 20 inch barrel (or were considering cutting the 24" down to 20") would you tend to want a faster burning powder for the shorter barrel? for instance, H1000 or Retumbo for the 24 inch and something like H4531 or 4831SC for the shorter barrel? or even 4350?

@ca2129 Год назад

Any chance more .284 bullets show up with longer higher weights? Not a lot 180grains out there

@wisemechanic1758 Год назад

Where in the hell did you find large rifle magnum primers?

@jamiedew2171 4 месяца назад

Thanks for this video. Just bought my new 7mm PRC and need to buy my components to load for it. Do you like the Retumbo best for this or have you found another powder that works better for accuracy? My 6.5 PRC love retumbo so it would be great if I could just use it and go ahead and buy 8lbs.

@masone4589 Год назад

So Hornady has all three factory loadings (160, 175, 180) listed at 3000. I wonder why that is? I’m most interested in that 160 CX for hunting. I wonder how fast you could push that thing with the 3.340” COAL?

@waynemensen4252 Год назад

Copper is incredible. Super penetrators and serious hydroshock.

@USAFTACP Год назад

It's accounting for chamber pressure for each bullet. The 180 ELD-M is just a few feet slower than the 175 ELD-X. But, when it comes to the CX the bullet causes a higher pressure, so it's loaded with less powder for the same speed to maintain the same pressures.

@stevereese6488 Месяц назад

What about barrel life? Is it comparable to 300 win mag or is it less?

@shooterll7936 Год назад

I’ve been searching high and low for Retumbo for 3 years, haven’t found one grain! Has anyone else been able to locate any? The unicorn of powders lol.

@jamesspikes Год назад

I have over pressure issues with my factory Hornady 7mm PRC 175 ELDX Precision Hunter ammo in my new Christensen Ridgeline FFT 22”. I noticed the ammo is .03 longer than Hornadys reloading manual. When I chamber a round and pull it out I have rifling marks on the bullet, unsure if it’s a ammo or a chambering issue.

@Andrew-jm4tp Год назад

I noticed the same thing when I used a factory loaded 175 ELD X round to set seating depth on a new die. It came out significantly longer than the Hornaday published OAL for the exact same 175 ELD X bullet.

@Ryan_YoungUSA Год назад

Have you had any issues with the shot brass resizing? Anyone? Great vid

@fisherus Год назад

I'm wondering why the Dillon XL650 won't load the 7PRC when I have loaded. 270 Winchester and 300RUM on mine with a few modifications?

@tonywombolt8786 Год назад

Gavin, how do you feel about the chamber freebore and Berger 195 eols? Do you think that work well in this caliber?

@Chato4570 9 месяцев назад

I want to see 7 PRC vs 280 AI

@thejoker_5.028 Год назад

Has anyone seen any load data or created any load date to do a smaller than 150gr bullet ? I'm looking to make this my all-around hunting rifle, and I would like to do some loads with, let's say, a 130gr from barnes, maybe ? Or any other suggestions someone might have ? Still exploring the cartridge

@TommyboyGTP Год назад

So... this, or a 28 Nosler?

@ryansones1626 Год назад

Check out the spin here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-neWwwSd2WYw.html

@cademarti1365 Год назад

28 Nosler. More energy/velocity

@ja0298 Год назад

28 nosler is also over bore, and has a shorter barrel life

@cademarti1365 Год назад

@@ja0298 yeah but it's a hunting cartridge not a paper puncher. 1000 rounds will definitely last some years it the average year has a couple dozen rounds down the tube

@ja0298 Год назад

@@cademarti1365 100% agree with you, for most it won’t be a issue. But for those that do shoot more than average deer season though it is something to keep in mind. I look at the 7 PRC as an updated 7mm rem mag. No belt, better case design, better chamber design (essentially a match chamber) and designed for efficiency. I think that for the majority of the hunters, who may not take advantage of the 28 nosler’s extra speed and energy transfer, the 7 prc is a better fit.

@SaneAsylum Год назад

Cartridge design for hunting should start with understanding bullet design. Hunting bullets are designed to expand from 1800fps-3000fps (some claim slower or faster few reliably deliver). The longer the bullet the more potential for penetration it has (SD). The higher the BC the flatter it will fly thus extending your range. So you should look at a bullet like the Berger 195 grain EOL Hunter bullet as long for caliber with a high SD and BC, get a twist to stabilize it and load for a muzzle velocity around 3000fps (faster and you risk it blowing up on close up shots, slower and you lose effective range). That does the most that can be done with what we have available to us. The 7 PRC fills that niche nicely, with some room to grow. The 6.5 PRC does it pretty nicely too in a "short" action. It however is too long for many short actions to see the best performance since it needs 3".

@frankspataro9714 Год назад

How would that prc shoot with 120s or 140s would it still shoot under a minute with the fast spin rate

@garrittkirchoff1672 Год назад

I just placed an order with my gunsmith to build a 28 nosler but considering switching to the 7 prc. When do you think the components will be available for reloading?

@thecheapshot1065 Год назад

6.5prc, 280Aai, 7mmprc? I'm leaning toward the .284's. I have to ask for a new rifle where I actually prefer weight and barrel length and I hand load so ammunition availability is not a concern as long as I can buy brass. Is 7 mm PRC going to be that much better then 280AI both with a 1 in 8 twist barrel. I'm looking at the Browning x-bolt long-range or Western Hunter long-range both right about $1100. Both 24 or 26" barrel. I'm hoping stock they've planned on this handling a 195 grain Berger but I'm going to be focusing around the 175 to 180gr bullet weight I'm just wondering if the hype around the seven PRC is going to be superior to the 280 Ackley giving that they're both going to be running the same twist. It for a target North American medium to large game rifle. I thought about the 300 my concern is recoil. I was looking at the 6.5 PRC but inside 500-600m I think he's larger diameter heavy your bullets will just be. Honestly I don't know would love the advice

@Ensign_Cthulhu Год назад

The big question: what new edge does it offer over cartridges with similar powder capacity?

@ja0298 Год назад

From the podcasts I’ve listen to on the PRC line, they essentially gave it a match chamber from the start. That and not having a belt.

@BadKarma.- 9 месяцев назад

Has anyone load the 197gr Sierra's in the PRC yet? If so how did they perform in the 1:8 twist

@christiansmith9414 Год назад

Tremendous!!!

@fuenstock Год назад

Can someone tell me what the correct Lyman shell holder I need for 7mm prc?

@BabeRuth1978 Год назад

Who makes a rifle for this 7mm Prc, I can’t find it.

@BrettMcNary Год назад

savage

@BabeRuth1978 Год назад

@@BrettMcNary thank you

@kuronyan3006Ackley Год назад

7mmPRC💪👍

@kerrypurcell6022 Год назад

great video,,but,,,,,,,,,,,,yesterday i bought a 1 pound bottle of imr 4831 rifle powder 53 dollars before tax,, bullets are like buying gold,, cases are really hard to find at any price,,primers dont seem to exist,,7mm prc ammo is at least 80 to 100 dollars a box,,, like it,,but my 308s are going to be what i shoot the most,,its affordable,,

@frankserra6709 Год назад

Wonder how this 7mm PRC compares with the 7mm Remington Ultra Magnum which I have in a new Sako model 75.

@paulmeek7964 Год назад

I had one in 7 still have one in 300 RUM . Personally I think you have the better hunting round. 7PRC components are going to be hard to come by. Just my 2 cents

@frankserra6709 Год назад

@@paulmeek7964 Hey Paul, when you had your 7mm RUM. Was there any specific round/load that you found that gave you consistent accuracy. I have only one box of 20 round of the Remington 140gr. now. So going to have to reload them in the future.

@paulmeek7964 Год назад

@@frankserra6709 I used H1000 with a 140 Accubond 95.1 and WLRM primer also the 215 worked decent. Work up to this because it a hair warm but no pressure signs or sticking bolt but shot less than 1/2. Good luck

@frankserra6709 Год назад

@@paulmeek7964 thank you so much, I have noted it down.