This is an instructional video on how I build my 8ft x 3ft snake enclosures along with some added bonuses. The basic setup will cost roughly from $200 to about $250, depending on what you have or don't have already. Hopefully this will help you build your own enclosures, or give you some ideas on where to start.
The Cage is constructed from 3 pieces of 4x8 Plywood that is 3/4 inch thick. You will shave 2 of those pieces down to a 8x3, leaving you 2 scrap pieces measuring 8ft x 1ft. The last 4x8 you will want to cut length wise also. Take from it, 2 pieces that measure 8ft x 17 inches wide. This will provide the back (94.5 inches x 17 inches)and the 2 side pieces, 2 (3ft x 17 inches). Home Depot or Lowes will cut this down to size for you. The remaining scraps will be used to construct the faceplate and inner part of the sliding glass mechanism.
21 дек 2018
