Here’s a simple fix for the Mytee 8070 Lite no water pressure issue. I searched other videos and none that I saw went over this easy fix! Hopefully this helps someone!
Thank you, I don’t have an extractor but I do have that upholstery wand. It got clogged the very first time I was trying to use it. I’ll see if that tip is the problem. Thanks again.
I do carpet cleaning and have to clean the nozzles because stuff from the water supply gets stuck in the nozzles from time to time. I also do power washing. I lost pressure the other night. I was in a hurry and didn't run water through the hose before connecting it to the pressure washer. My 4000 psi pump only put out 1000psi then zero psi. My wife asked if the filter was clogged. When I finally listened to her I checked and found the filter was covered with leaves from the water faucet. Easy fix once you know. Thanks for the video.
I spent way too long working on this thing and then I finally checked the tip lol figured it may be helpful to someone out there. Thanks for watching Paul!
I have the previous version of this model. I've checked the tip and the lines inside and they're clear. How would I go about clearing the actual spray hose?
Man I got lucky and it was just the tip on mine, I’m not too sure about clearing the hose. Maybe take all the fittings off and try some compressed air. It may be easier to just get a new hose though.
I always have to prime mine before filling it with water, I shoot water inside the water intake (where the screen is inside the tank) with a garden hose.
Pushed it in but it just pops back I’m not sure if the issue is using a 220 to 110 converter but vacuum seems to work pump makes no noise or sound and no water comes through
Sorry brother I don’t know which caps you’re talking about, I haven’t had to buy any spare parts for my machine yet luckily. I just try and keep it clean. I’m sure you can find replacement parts online I’m just not too sure where.
Yes sir! Great question! Vapor lock happens on this machine when you turn on the heater before your pump is running. Always turn the pump on first and run water through it for a few minutes then turn the heater on to heat the water. The pump should be the first thing on and the last thing off. It says it takes about 8 min to heat the water but mine has always heated faster than that.
You may have to contact Mytee and see if you can get a new pump or if there's another option. I think the pumps run about $300ish but its been a while since I looked them up
Man I couldn’t tell you what it’s called but it’s a little clip that came with mine that is designed to keep that quick connect from coming apart. That’s exactly what you need so that’ll stop happening to you. I wish I knew what it was called.
My mytee is a year old I smelled a rubber burning smell then bam no pressure then the pump light stays on even when it's off any idea we're to start brother ?
I don’t man, my first thought would be that the pump burnt up for some reason but that might not be the case. I would try some of the steps in this video and see if any of those help you out. You may try contacting Mytee and see if they have any idea.
What kind of update are you wanting to see buddy? I’d love to make one. I have a video planned hopefully soon for our new trailer build. That should be coming up soon. We’re having a beast mode 2.0 made from Shawn Hodges at Arkansas Washing Equipment. Going to be 2- 8gpm hot water machines, gas roof pump, remote downstream kits for each washer, light bars, tank lights and all kinds of good stuff. I’ll definitely be making a video of picking that up and doing a full walk around. Anything else you want to see let me know and I can work on getting it up on the channel🤙🏼