Mytee 8070 new model no pressure DIY REPAIR 

This helped me troubleshoot no pressure in my mytee 8070. In summary I removed all hoses; from water feed to pump, from pump to heater element, from heater element to housing. I used compressed air to blow air through all the hoses, water pump, and heater element. Then I put everything back together and viola. It was good to go!! When i removed the hoses from the pump i turned the pump on to see if it worked and it did. Turned the heater element on and that worked also. So, decided it was clogged somewhere through the lines. I'm not a technician but it worked out for me. God bless you all.

Thank you brother!!! I was so frustrated and didn't knew where to start but I just fixed my machine thanks to you.

Thanks I did used a paper clip and hose was clogged going out into heater. That’s all I had to do, I wasn’t getting no water on sprayer.Thanks for your video.

Good job man. You figured it out.

Thank you for this video! Well done!!!

Problems with the vaccum, when i started takes a few second to get a strong vaccum any reason? It is almost brand new

My mytee 1003 just stopped spraying in the middle of a job smh... I guess I'll try to self repair mines now...

My pump starts up but then it turns off. Only when I squeeze the nozzle does it turn back on

Having same problem now can we purchase the hose

I have a 8070 brand new and the pump is not working at all . I will call the the dealers if a have some kind of warranty?

😌

My mytee is doing the same thing

I can't connect to the quick connector?

I hope I can fix it I have a big truck tomorrow morning I'm so nervious 😰

So expensive for one of these but every one I see in use is taped together and fucked up

Bro we dont need to know your mental dialog to the T, just summarize what you DID, this vid should have taken 3 minutes. BTW you didn't need to remove the water recovery tank to access the pump compartment.

This didn’t help me do anything . Why would you put diy repair if your not even fixing the problem

You don't put tape on those fittings. They look like JIC.

hello how can i find you on facebook