First, oil level is checked only at engine idling. There is no level for stopped engine. Ur oil looks more like necessary to change. A440f was used only with gasoline engines, diesels (turbo) had non electronic A442f in 1990-6.1992. Not remember sure how it was with 1hz engine, mostly those are manuals.
Mine has slight flare during lockdown about 100rpm from 3rd down to 2nd. Have also noticed it with no load going downhill around a rhs corner. Fluid not to dirty bout same as yours. Would that be a solenoid?
Hi mate, Is a 2 - 3 lag caused by this?? Sometimes my motor free revs for a second before changing to 3rd, It annoys the hell out of me. Even a full rebuild didn't fix it.
Hey mate I got code 41 from the flashing OD light. Says TPS. Should I see if it’s fixable by readjusting it or just swap in a new one and call it a day? Mine is a 1hdt btw
The A442 should hit the rev limiter. If one is fitted. Meaning just before the redline of the tacho. Mine will change on any gear 1-4 at 4200ish rpms. However, it is never a good idea to get a standard engine/transmission into that rev range in general
