[81] How To Disassemble and Reassemble Your First Lock

Просмотров 24 тыс.

% 403

Easy To Follow Guide On Takes Your Locks Apart!
Link To Subscribe➜ ru-vid.com
This video goes over how to take your locks apart and how to put them back together safely.
Here Are A Few Links To Some Items You May Need Found On Amazon:
Kwikset Cylinder Removal Tool / C Clip Remover: amzn.to/2Ihjn5Y
Plug Follower Set: amzn.to/2FKlYjx
Pinning Mat: amzn.to/2HREA2F
Wooden Pinning Tray: amzn.to/2KEOM0y
Digital Caliper Measure Range: 0-6 inches: amzn.to/2K98pg6
Core Shims / Shim Stock: amzn.to/2KZ3Q9w
Beginner Lock Pick Set With Practice Lock: amzn.to/2KRzSUI
DISCLAIMER: This video and description contains Amazon Affiliate links, which means that if you click on one of the product links, my channel will receive a small commission at no extra cost to you.
Thank you for checking out this video! If you have any questions or suggestions please leave them in in the comments below.
If you liked this video and you would like to see more like it, please subscribe, and as always I hope you have a great day!
Thank You For All Of The Continued Support By Subscribing, Liking, Sharing, Clicking The Bell!
If you enjoy my content and would like to help support my channel, please consider checking out: www.paypal.me/HelpfulLockPicker
Your fan-funded support will go directly to helping improve the quality of my content. Giving back to the lock sport community is at the heart of my channel, your support will directly help increase the frequency and value of my giveaways. If you would like to contribute items to my giveaways please contact me via email at: Contact.HelpfulLockPicker@gmail.com
Thank You For All The Support!
#HelpfulLockPicker #LockPicking #LockSport

Опубликовано:

27 сен 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@HelpfulLockPicker 7 лет назад

Please Stay Tuned Every Wednesday at 4 PM Eastern For More Episodes To Come!

@lockmania-locks 6 лет назад

Nice info if someone want to take their first lock apart.

@HelpfulLockPicker 6 лет назад

Thank you for the kind words, I hope it helps!

@lockmania-locks 6 лет назад

I relly think it do😁

@j.gabriel8573 4 года назад

i probably already commented on this video, but thanks for this!! i just disassembled and reassembled one of my cut away locks, 6 pin, adding two spools and two serrated, while keeping two standards in the bible. i will say this much, good thing i have a magnifying lamp ( has to have corrective lenses @ times ) and sweaty hands made it a little more difficult than desired. i will definitely check out more of the videos you share of other sport lockers and once again, thank you !!!

@HelpfulLockPicker 4 года назад

Thank you for the kind words and I am glad it helps! If you have any questions feel free to ask :)

@j.gabriel8573 4 года назад

@@HelpfulLockPicker yes sir! i will do. i know that i like the feed back of the serrated pins and i will start swapping out some of the standard driver pins in my other two 6 pin cutaways i have and then make my way onto the learn lock picking 7 pin adversary. i really haven't messed with the padlocks in awhile, the brinks 50mm, the master lockm1xdlh and master lock m1xdblf. i will go back to your 10 locks list and probably see what i can locate at some of the local stores in hopes of getting a better deal on them. i saw a good idea where i may put out an ad to buy locks with or without keys at a certain amount a pound and see if that does well on getting some of those for a decent time frame. i do plan on buying some more of the 7 pin adversaries to make mods to them to practice with that i have seen others use in challenge locks. i have had a little more time to practice picking since i am between employers for now, but should be completing the on boarding process with the new employer hopefully within the next week or two. it's fairly easy to get employed in the tower industry, the work is definitely out there. if i have any questions or put together a good challenge lock for you i will give you a heads up. stay well, stay safe and stay sane!

@Timbo63a 5 лет назад

Nice video! (I already learned how to launch the springs the first time I tried this - too bad I didn't see this video first!). One thing I'd add - you might need to depress that pin to start turning the cap off on the American lock. And when putting the cap back on, be sure to tweak the position so the locking pin ends up in a notch to prevent it from coming loose.

@HelpfulLockPicker 5 лет назад

With American locks I typically turn the lock to the counterclockwise position and then the follower will line up perfectly with the actuator

@iyeetsecurity922 3 года назад

Greetings! I have a couple of cheap, 25mm padlocks (basically luggage locks) and want the cores out of them for a jewelry project. Is there a way to remove them? Destructively I imagine is the only way, which is fine as long as I can get the core. If not, is it possible to purchase cores that small, and if so from where? Thanks! Love your channel! Been hooked for weeks now!

@HelpfulLockPicker 3 года назад

You would probably need to cut it open with a dremel

@poisonouspotato1 2 года назад

I should have watched this before making my own cutaway

@HelpfulLockPicker 2 года назад

Thank you for checking it out. I hope it all worked out in the long run

@graveseeker 5 лет назад

I was surprised that you managed to unscrew the retaining cap from the rear of the Schlage lock without first depressing the spring-loaded anti-unscrew pin. That's tricky to do without launching the pin across the room and you might want to splice that in or add it to the end of the video.

@HelpfulLockPicker 5 лет назад

Thanks for checking it out! I sometimes use the Schlafe tool. It really sucks when you lose those tiny pins/ spings

@tipenengapuhi 7 лет назад

Very informative nicely paced tutorial

@HelpfulLockPicker 7 лет назад

Tipene Nga Puhi Thank you for the kind words!

@UKcuber 4 года назад

Am I correct in thinking that swapping which pin is where for the driver pins is fine?

@HelpfulLockPicker 4 года назад

I am sorry but I don't understand what you were asking

@UKcuber 4 года назад

@@HelpfulLockPicker swapping the 2nd driver pin for the 3rd for example

@HelpfulLockPicker 4 года назад

@@UKcuber if you are dealing with a lock with all standard driver pins likely not. Here are a few examples where it can make a difference. Some locks with standard pins which are more expensive do have driver pins length that corresponds to the key pin so switching them would de optimize their placement. Also, once you get to security pins (especially spools) if you place them over too long a keypin they can be less effective

@UKcuber 4 года назад

@@HelpfulLockPicker thanks for your help

@usaamahelkiki 4 года назад

Helpful lock picker, how would I open a clear acrylic door lock

@HelpfulLockPicker 4 года назад

I would need to have one in front of me to try it out but unfortunately I don't have one

@usaamahelkiki 4 года назад

No worries. You re still the absolute best

@MsJayrah 2 года назад

I got what looks like a small washer with a hole for the spring loaded pin, what do you do with that

@HelpfulLockPicker 2 года назад

It could have come off the tail piece

@rullynic5736 5 лет назад

Video yang sangat bermanfaat bagi saya.. Bro

@HelpfulLockPicker 5 лет назад

Thank you

@gillsgills 4 года назад

What if, when putting the lock back together, the springs are too long, sticking out of the holes, so there is no room to align and rest a driver pin in each hole?

@HelpfulLockPicker 4 года назад

It just takes more patience sometimes you can hold them with pinning tweezers and push them down with a pick

@gillsgills 4 года назад

@@HelpfulLockPicker Having some trouble with this. I got a set of hollow plug followers - does the flat backing in the groove of a solid one make a difference in allowing you to rest the pins on the back, or should it not really matter?

@Frosty901 7 лет назад

Awesome video buddy! 👍👍

@HelpfulLockPicker 3 года назад

I hope all is well with you

@Ianjowett1 6 лет назад

Hi Doug can i sak where did you get the rubber matt from got the pin tray on order now thanks to ebay but do love that matt

@HelpfulLockPicker 6 лет назад

You can buy it from Sparrow Lock Picks in Canada. Just Google "Sparrow Lock Picks"

@Ianjowett1 6 лет назад

ordered thanks so much

@Ianjowett1 6 лет назад

alxo seen they have some othr nice things so put in an order imclududing a few things ive seen you use, and the brit pound conversion doesnt work out bad at all cheeers buddy

@crazyjoe4247 2 года назад

What if I don’t know which is first second third fourth fifth sixth and seventh pins

@HelpfulLockPicker 2 года назад

I would use the key and see how the match up when you insert it into the plug. You can also measure your pins if you are not sure which pin is which

@Leonslockpad 7 лет назад

Great vide my friend cool info😎😎😎👍😊😊😊😊

@HelpfulLockPicker 7 лет назад

Leon's lockpad thank you for the kind words :-)

@dennyskerb4992 7 лет назад

Lots of information

@HelpfulLockPicker 7 лет назад

Denny Skerb Thank you, I hope it helped :)

@xderiwx 7 лет назад

Anyone have recommendations for DIY items for a plug follower while I wait to purchase some? This would be for a Sargent mortise lock.

@HelpfulLockPicker 7 лет назад

xderiwx Some people use wooden dowels and Sharpie Markers, whatever fits.

@xderiwx 7 лет назад

HelpfulLockPicker Thanks! Got some Sharpies! Is it okay if the plug follower is a little smaller in diameter, or does it need to be nearly exact?

@HelpfulLockPicker 7 лет назад

xderiwx A tighter fit is best. To be extra careful you could use a core shim or make one yourself by extracting the small pieces of metal out of the security tags in DVD cases

@xderiwx 7 лет назад

HelpfulLockPicker Sharpie is a bit smaller than my lock. I'll keep looking. Thanks for the tip on the core shim!

@Uniquettt 4 года назад

excellent and clearly methodically taught.when I first tried this I sneezed and everything went everywhere 👍👍👍🥇🏆🔑🔐🔒🔓🍺 I still dont know why its called a bible.

@HelpfulLockPicker 4 года назад

It is because in a key-in-knob (KIK) cylinder type lock it sort of looks like a book

@Uniquettt 4 года назад

@@HelpfulLockPicker Thank you Strange looking book but why chose the bible l.o.l. The lock bible is the part of the lock cylinder assembly that consists of: The bottom pins The top pins Any and all master pins (master wafers) The pin stack spring (This and the previous line items constitute the pin stack) The drilled chambers that hold each pin stack - four (4) to seven (7) drilled chambers in each lock cylinder. A locksmith refers to this total number of items and the drilled holes in the lock cylinder they rest in as the lock bible. the information from www.apexaccesssecurity.com/what-is-a-lock-bible/