8s Freestyle Drone! 

totally, he's gotten super good. No surprise really - he practices a lot

True i never knew how good he really is untill this video

@@pepegac9999 yeah he also has a great series where he learn sbang on his channel

Who rated it?

@@andyhoughtaling6319 well I feel like there’s this image of him being like a coach of some sorts, someone who knows a lot about it but isn’t that good at it but after seing his sbang series it’s clear that he’s a top tier pilot himself!

he keeps improving

That was not bad for Bardwell, He got a lot more in him

he is learning each day do u got that time? And i preffer le dribes flying any day...

@@patrickfrensdorff7485 no need to get hostile with him lol DO U GOT THAT TIME?!

How much power. All of it.

huh?

Feels like the missing pieces in his fence have made him really good at tight controlled power loops

Good point

It was just odd that the punch-out was totally there 10 seconds before it died though. Although the one time I've had that issue, my 4s was DEAD DEAD and it wouldn't even come down in a controlled manner to land.

A lotus is still a lotus with a v8 Your just talking 😂

@@harryfp1494 I am a canyon carver that has built several Volkswagen MKII GTI, and I can assure you that a W-8 under the hood of what used to be a 1850lb. dancer can no longer hold the same line without more meat on the tires, and better suspension.

More blades can always suck the power. And when you have 20 blades and the tips go supersonic you just add a duct to keep the blades from biting off more than they can chew. The duct in a turbofan regulates flow to pitch speed to keep AoA small and alleviate wave drag (typical tip speed is 1300 fps). IMHO you could put over 100 HP into a 5 inch fan before you'd truly need to upsize the diameter.

This good to know as I got one to build an 8s 7" on molicel p42a . What fc u run ? I found rush blade f722 has 8s fc so have paired them two together.

I killed my 7 in 8s reaper on 1350kv 😭 it took my matek hdte with it. The saddest part is I didn't even crash it when it decided to fry, the voltage reg died on the esc just cruising around. Was a sad sad day

@@Brian-S oh this is basically exactly what my build will be . 1300kv on 6s is slow af . So was going try 8s . Maybe not a good idea now .

​@@mx118racer you will need lower kv motors for 8S 7" setup. The only ones off the shelf I could find are the diatone 2808 1100kv. Make Sure to use a 50v330uf capacitor or higher

@@mx118racer #1. Tmotor F7 Pro 2. Lumin. Lux H7 Ultimate

Hey Ian! Mad's Tech, My favorite FPV channel! Interesting it really is is, but is it needed? 🤔 I think the biggest advantage of running higher number cells like this would be the lower current, which could help reducing heat, and being more efficient. But for the increased power, at least for freestyle I think there is not much benefit. And for our pocket, well, zero benefits..

Sounds like it's time for you to grab a pair of Dji Goggles, their RC2 remote and any dji 03 compatible quad.. I started with the DJI FPV Combo, was super great for learning how to fly after first practicing in a simulator(Step 1), putting at least 36 hours in... Now I'm practicing low level and indoor flying with a 2 inch/4s CineON C20 V2/Dji03. The Dji FPV makes you a cautious/safe pilot because if you crash that's ur ass(and some cash)! The avg cost of repair is $80-$100, no need to bother with DJi Care. Any other 2s,4s or 6s quad is practically indestructible compared to the Dji FPV, but I would have never even gotten into the hobby if it wasn't for the DJi FPV, for sure... It is probably the best introductory FPV Drone on the market... In addition to its safety features, it also has normal and sport mode so you can fly it just like your mini 2 until you master manual/acro mode.

So you’re not hoping for innovation

New hype calls for new ideas new trends

​@@denis69istguessing that comment is from the cost perspective 😀

Xnova 2208 1500kv work too.

Holy shit 2.5" 6s... awesome.. git vids on ur channel? Ill check it

@@SpaghettiFPV-tg3qh Sorry, early in the morning and was going by memory! It is a 3", not a 2.5" I have so many quads that I et them mixed up LOL! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-y0nVTdLJxGA.html&ab_channel=CAPTAINDRONE

yea i was gonna say hahah I got an AOS 3.5 im doing into a 03 air unit 6s right now :) should be fun hahah

@@SpaghettiFPV-tg3qh hows the aos3.5? I am looking at aos 3.5 vs quadmula f3 split with those hv 6s.

@@GlobalSourcing mate im still building im just waiting on a few lil things antenna etc from order. I made an aos 5" if it flies anything like that it will be gold those frames are fuckin tight they feel so locked in when u fly.

What about rcinpower smoox 1300s ? I am building one(8s5") right now. Trying to figure out the motors. I'm thinking foxeer 8s 65 amp esc, the 8s foxeer FC, vista, and running the vtx off a 9 volt bec. I also don't know why the couldn't get osd. They should be able to no problem.

@@skyweaver3199 you mean the rcinpower 2306.5 1350kv motors? Yeah, they will work. Might just be a little slower than 1500kv. Mathematically you need to multiply your prefered 6S motor KV by 75% and add an other 7% on top to get the same kv like the switch from 4S to 6S. If you want to know why, watch KabaFPV Video on 4s vs 6s motor talk. Basically the same applies here from 6S to 8s. I`d try find 1500kv.

I mean yea technically yes but the difference between 4s and 8s is so negligible in terms of arc length that I honestly don't think it makes a difference

I mean even at 400v dc the arc maximum length is like 0.03mm

Yes lol, but that higher voltage is not going up 8.4v 😂😂😂. It take quite a bit of voltage to jump any gap.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-76TIanhpReA.html

I built one with some 2408 1350k test motors on an apex 7 inch. Unfortunately I only had 1300mah packs to test it out but was getting about 4 mins of balls to the wall full throttle ripping. So I'd imagine it's be stellar on a long range set up with something like a 3000mah 8s