9$ Delid 13900K CPU Opener Review 

I have to say thanks for the video! Helped me a lot deliding my 12900k. By the way I used quick hot air station with small tip to heat just the IHS, I set the temperature to relatively cool 150c heat the IHS for about 2 minutes and it went with EASE. Plus side is the tool itself didn't get too hot so no need for gloves, plus the plastic parts did weren't damaged so you could use it in the future. Few tips use a toothpick when cleaning the silicon and when removing the solder from the IHS, gallium based liquid metal is your friend here together with the toothpick (I like it over the razor blade because it mostly likely won't damage anything). To further clean the die use either normal thermal paste with paper towel, or use metal polish (it's not required but will give cleaner look). One difficulty I find is how much to tighten the waterblock screws I have it working but I have zero idea if it's optimal.

95 c with diret die pulling around 280 watts is pretty high.

this tool is sooo good 50 times better than those expensive ones

I'd definitely suggest to place the gallium onto a q-tip rather than straight onto the cpu. I'd like your overclock especially your ram cl30 7800 45ns very good 👍 I'd like to see your bios settings. Have you uploaded your bios settings before?

could you please tell me I could find gallium to remove the solder indium? i used aliexpress LT-100 liquid metal on it and it's not doing anything.

ayo f1-8x spotted

95C is still quite high... you sure that tape on the CPU isn't the cause for that high temp?

What's your daily settings like?

What was the temps before...?

someone needs to goto the gym lol