Great job. I relax watching you. An old Amish guy taught me to light a candle and put it on my workbench when I am working. He said candles burn slowly and so should a craftsman. He said any time you feel like you are rushing blow the candle out and come back later. I think this same Amish guy taught you how to work.
Not a welder but really love to watch a craft like this. From what I see you really do some professional work. I also like to see the repair jobs on the big equipment, it really shows your knowledge on how to repair high stress areas.
I thoroughly enjoy watching your channel. It’s nice to see that there are still some great fabricators out there in the field. One of the reasons I enjoy watching you work so much is because I find that you and I think and work very similarly when doing welding repairs. It’s almost a little scary. Keep posting great content. It’s a pleasure to watch your strategy and methods and skill. Keep up the great work!
always love your videos, I've been watching your channel for over a year now. I'm just about to get out of welding school, I like to soak up all the knowledge and experience from people like you!! good work!! 😃
Great video brother you have some serious welding and repair skills. I worked in the Tower Crane field for 30 yrs and I’ve only come across one guy who could repair, fabricate, and weld like you. Sir I just subscribed and want to see more of your work my hats off to you.
Hey man, as a logger/farmer/welder for a long time that’s done a lot of jobs like, you did the damn deal on these bosses. No joke, my hat is off to you. That’s the most Percision job I’ve ever seen for a mobile job. New sub. First vid I’ve seen of yours, but I’m sure I’ll see a lot more here soon
Hi if been watching this guy for the last few months and every video is even better than the last I'm a farmer -heavy excavation driver all my life in Ireland and and iv an ark and co2 welderbut I'm totally blown away every time I see him at work iv so many questions for him I wouldn't know where to start Tahe care from Ireland shay😎
Man that's some pretty work right there. I work for a company as a machinist and most of my jobs are drilling and boring. To see someone repair something like that, oh man thats crazy. Love your work, keep on at it. Wish you the greatest.
Nice repair! Good job. I’ve done some of those. But they didn’t get any other parts. Just said fix to me or put back together. They didn’t have any more issues after I welded it up like you did. Patch jobs I’ve been used to.
Nice work! We finally got a gouge in the shop and I have been playing with it. I am clumsy and uncoordinated. Like a new borne colt walking for the first time! Shaky. I am beginning to get a feel of it but it's not intuitive I can say that. Of course I am relying on RU-vid to teach me. You, CE Engineering, IC Weld (he's a really good one) and a few others. Love it!
Over the years I have become an expert...at watching RU-vid videos of this nature. Now according to my untrained eye and years of ignorance, let me say...looks good to me! At least I enjoyed watching the video!! Thanks for sharing.
Nice job. Add plate on either side so your weld is continuous past edges then grind off after. Needle gun good idea too helps relieve stress build up plus gets slag off quick. Should really be nothing wrong with the repair vs the new one if done right but pin should be a proper fit as the slop will cause it to beat on it which may break it again.
Excellent job! May I suggest that any repairs you make and safety recommendations that you could give to the company regarding there equipment be put into writing and sent via recorded mail delivery to the company, and keep at least one copy for yourself, kept away from your home and office address, as in the event of equipment failure, the company will be looking for "A peg to hang the law suit on" Keyboard commandos ALWAYS know what's best for the company, but not you. A trailer break down on a public road COULD result in fatal injury to a member of the public resulting in millions of dollars going away from the company. Just making them aware.
Looks like a great repair. One way I like to gusset a round repair is cut off some flat bar to an appropriate lengthXwidth, weld to one side and use a jack on the opposite side to form it to the radius. Then you have a virgin steel gusset around the whole piece, though the two section gusset should strengthen it quite a bit also Some of my favorite tools for prepping in field repairs are the metabo 7” tube sander, metabo 4” burnisher and the metabo chamfer tool Cheers buddy
Hey bro your job is cool, I like watching. Nice seeing others work hard. I’ve ground a lot of schedule 160 hastelloy with those rocks work well. I usually smooth it with a carbine teardrop, then rock it. Works good
not too bad, hope that the customer takes only light weights on it until the whole repair is done, the insurance will find any way to refuse a payment if anything will happen that could be related to your welding, even you and us know that you don't do shady work... Thx for the vid, great to watch! 👍👍👍
Awesome job , Hopefully they will get the new fitting so you can fix it up back to factory spec , unfortunately ,like you said , they will run it until the break the other side , then replace both sides at one time . Great job ,
Only my thoughts for what they're worth. I'll bet that if you were to wrap a piece of 5/8 strip the width of the ear that went from top to bottom and welded it completely that ear would never break. We'll never know . Your job may never fail either!! Would be interested to know! Great job !!!
Well, if you don't schedule the maintenance, the machine will schedule it for you! mostly at inconvenient times though... When you do the full repair, might be worth adding some wear pads underneath.
Bad ass job like the fuel leak one, this is another one that really is relying on your skill, I also say bad ass because you said the trailer company said you can't do that and you said "well they don't know me" 🤣 your a steel surgeon, it's steel, it can and will be fixed hell or high water, you do some good gigs! Big gigs! Got a great setup and plenty of skill I think you'll be fine for years to come
If the company said "You can't do that." they sure as hell would not be offering the component(s) for sale. Customer service (in India) says your computer will not work until you install Win11 too.
That’s a good owner / operator. Why wait for the correct repair? Just risk it and hope. After all, time = money. Hopefully the owner signed an affidavit that you are not responsible or liable for anything after the repair when he takes it down the road under load again.
Sheering pins on that Murray is really squattin er more than once! GREAT SOLVE MAN!!!!! Tip my hat to yer skill and discipline to do what ya need to do to your standards! Not a welder or anything just a RU-vidr but ya got a new sub here! Dig yer stuff
I would be scared to pull that trailer loaded after a repair like that. Nothing wrong with what you did that's what the customer wanted. That's also why the better trailers have a 3 to 2 plate joint.
First and foremost.love your channel. It just boggles my mind how customers want to go the cheapest way out but yet it's going to cost them double in the long run to the job right. Been there done that. If it was me i wouldn't touch that job. It's a safety concern and a liability. Cutting corners will get someone killed. Do it right the first time.👍
Sounds like lack of inspection and Maintenace is the cause. If they checked over those pins probably would of found that crack beforehand. Should be standard to check over all that on reg basis or if its been unused for a time before use.
Just a personal thing, this job is big enough some run out tabs might be worth using. I've rarely use them because I almost always stick weld any high stress joint. I really want to look into dual shield. Understand it has almost the same penetration stick does and builds faster than mig.
It’s a temporary fix. Or I would have used run out tabs. Dual shield has the same strength as stick depending on the wire selection. And a way faster deposition rate. Only flaw is sometimes the wind will get to you.
@@OFW I got my first welder back in 1985. Done one or two beads since then. I still feel like a newbee almost everyday there is so much to learn. For the wind I was thinking a folding screen like you see the pretty lady changing behind in the movies but bigger and some sand bags to keep it from flying away. Another reason I like stick, doesn't care the wind. I have been hit with a gust strong enough to push me off the weld though. Can't account for everything in life. Good thing I had loads of room before I got in trouble by being pushed around by the wind.
Man using that rose bud to heat that thick steel had to be time consuming, I guess it wont be long until there's an induction heater to heat up steel that thick really quick but that was an excellent repair
"They don't want you yo do it, but they don't know me." I love it! Within the field of mechanical engineering repairs, you are the Man. Your customers are lucky bastards to have you as many others would walk away from jobs you take in your stride.
I’ve done those befor get a crane on site so u can dip it up on its sides .then u don’t have to lay on your back gouging .cut the front cross member in half take it out makes it easier . Then fish plate it when it goes back together.use a number 5 tip in your touch and do as much cutting of the old hinders out lest air gouging then to . Just way I did it look forward to see how u do it
Great work! I’m curious. I’m not a welder, but… would it be a good idea to magna-flux the entire bracket before and after the repair in order to see if there were any cracks that needed to be gouged out and welded up at the same time in order to complete the temporary repairs? That’s a high-stress (understatement if there ever was one) connector and given that a prior-existing/long-ignored fatigue crack eventually led to a catastrophic failure, a few extra ounces of prevention would seem worth the effort. For that matter, it would appear that the trucking company should do a better job of completely inspecting their equipment upon a regular basis in order to make smaller repairs before bigger problems end up occurring.
please put up a vid of your truck and the gear on it welding stuff, wire used etc and give us your history, interested, I used to build ocean sailing yachts in aluminium
If they really need it that bad they'll be willing to pay a very handsome price to get it fixed. A lot of guys make extremely good money off rush jobs. Some of the best money you can make as a welder is when the customer is losing money every hour the equipment is down.
If this is where I work, once it was operational, they would have called and cancelled the parts.... Seen that happen before when we were asked to do whatever it took to get it running until a new machine arrived. Once it was operational(by replacing a snapped off piece of a 4' long pin with a 5/8" bolt, ( roller going into drive sproket mounted on the missing shaft)(on a steel belt conveyor)), new(i.e. new to us, very well used) machine was canceled until 9 months later a manager saw the repair and asked what it was...... Response was that we told you that conveyor was being driven by a bolt. We had a new to us conveyor installed within weeks.
Been watching quite a few videos of yours now. A lot of these seem like engineering failures first, maintenence failures second, and then some times you get a one off cradle death or accident. I know steel can feteuge over time, but it seems like something like this could be made 1-2cm thicker and avoid cracks like these. This does not seem like that old of a trailer. And then some of the repetitive failures on cat machines I hope they have fixed with design changes.
I run lowboy for a local construction company, we do the wet utilities, I move our wheel loaders , excavator's. Our biggest excavator is a JD 850D it comes in @ 160K& some change. To me that's a engineering flaw, you would think that part of the trailer would be over engineered. Q: wouldn't it been better to wrap that with a piece of flat plate? And wouldn't that spread the load out better that on a 1" guesset
How loose where the pins? Good call on adding the gusset on the outside. I probably would have doubled that gusset still that was good instinct to add it.
Great video! I love seeing you take the time to throw tacks on all the low spots and blend them out, true craftsmanship. What dual shield wire are your running in this video?
I learned years ago nearly everything like this can be replaced/repaired if someone had made it in a nice shop. Line boring would be great if you had it in the field but theirs ways to get it so close it’s not funny. Naturally,the trailer sellers say can’t be fixed as they want to sell another one lol. It ain’t fricking rocket science people, just know how.
I'd happily take on this job once the owner signed a waiver clearly indicating their knowledge and acceptance of the face that the part of the pin boss that bent is now significantly weaker than it was when it was new.
