9 PCB Board Holders reviewed - Qianli iPinch Kaisi Magnetic - Which is best 

Absolutely love your channel man. I found it a couple weeks ago and can't get enough. I really do enjoy everything you put out and can't wait for new uploads, please keep up the good work, 🙏 and be sure you have a new life time subscriber indefinitely.😊

Hi from Australia. Thank you for the great videos and reviews. I've just ordered the Universal PCB Board Holder and a silicone mat from your site. Keep up the great content.

Good day sir I’ve been sick had chemo done last week and wasn’t able to keep with your videos ! Yes 🙌 we do you a master teacher , leader and inspire , you are part of my prayers and the reason I don’t give up but since I started I’ve been rob twice and left me clean

Nice review. I’ve noticed you are just smashing it with new subscribers!! Congrats!!

Great video been watching you a while now, keep em coming!

Just in time for my new PCB bolder options. Thanks Alex!

Very nice explained. You are the best, such long videos mean a lot of work. Thank you very much for let us be a part of you and your work. Thank you👍👌

Ordered based on video. Looks sturdy and functional. Thanks!

needed some supplies was going to go aliexpress but I have to buy from you now since you did all these videos with excellent reviews

My favorite part of your videos is when you smile after you fix something!

Great review and this "TANK" looks really awesome and a life time companion 😄.Thank you 👍

Awesome ✌🏻✌🏻✌🏻 Feels good to hear your valuable thoughts and worthy experiences 👍🏻👍🏻👍🏻 Keep it up 🙏🏻🙏🏻🙏🏻

Thanks for your over view of all the Board Holders, your opinion matters to us, so Thanks!

I am considering that iPinch because it looks just great for holding watch cases, quartz pcb's and watch movements on a nice level surface that I can get my glass over without fouling or my scope too.

Love that 'tank! Nice review video.

Very nice. I had been wondering about these magnet boards. I do also have the oldest one you show, have it already for 10+ years, but its not so good. Usually I use one similar to the Clamp at 9minute

Good review on all the board holders one question though when are you going to restock on your custom magnet holder?

This guy sees himself as aged with his hair colour but i see him as a teacher in late 30s who is keeping alive the young version in it. I can see it from your talk, from your eyes, even from your glowing cheeks. You have family, you have your own shop which you its a great job for someone who loves tech, you have people who loves you (count me) and you have great kids. This is grace sir! Everyone wants a life like that!

The advantage of the ipinch is that you can easily rotate the entire fixture if you need a certain angle and you have limited space under a microscope. works great. does hold a switch board and opens and closes equally as quickly as any board holder that has screw fixtures.

As a user of the last type, I agree. A few tips though. 1) it comes in 4 or 5 different sizes. from 2 to 6 sliders. The one with 2 sliders is a bit shorter, 3 and up is same length. I have the 3-slider one, and its still heavy, probably 400 grams. 2) I'm not sure what it is, but there is a hard coating on the surface that is non conductive. 3) There are 3 different heights the board can sit on, on the blue pieces, but no groove that close in again that can knock off components. Its shaped more like stair steps. So you lift the board up 2 different heights, or at the lowest, sit flush directly on the surface. 4) you can loosen the screws with a hex key, then there is a little room for adjusting the blue pieces if needed. Same for the spring and button sliders. 5) If it gets really grimy, the whole thing can be disassembled easily, and plop the parts in the ultrasonic cleaner.

I could use the "TANK". Thank you for detailed review.

Hi. Thanks for a great video, as always. Wondered what do you or anyone else think about Hakko Omnivise? Have any of you guys used it? Do you recommend? Is having two of them beneficial for everyday use? Thanks 🙏

ಅದ್ಭುತವಾದ ಸುಂದರವಾದ ಮಾಹಿತಿ 👌🌹❤️ amazing and beautiful information 🌹❤️🙏

Great video. Thanks for the review. You need to work on the " But wait there's more" :) Like the infomercials. Joking. Keep up the great work. I will be buying one you offer magnetic.

Your soldering techniques are best😁

Great review, thank you.

For the QianLi have you tried to clean it with IPA ? I do it once a wile to bring it back to normal without the need of a lubricant . I really love this tool by the way.

Great comparison 👍

Thanks for the good information video's.....👍

Great review 👍

Great information friend!

How did you know I'm looking for one? Very convenient video. :D

Sir can i know what microscope arm/stand do you use before you use this Articulating Arm? Looking for low budget arm for my low budget microscope.

Can the PanaVise PCB Holder Plastic Clamps take excessive heat from a hot air station (is the plastic heat-resistant)?

the winner, looks like its big enough to work on MacBook Air and MacBook Pro boards too! a big plus for me!

useful video to me now i know which 1 is the best

i think the first holder's usage should be, you tighten the screw approximately depending on the size of the board, then push the spring and fit the board

Haha... I can remember how lucky I felt when a video got a comment. :) Also funny that your "worst" holder is the holder I use a lot. But... the boards I design are usually bigger and also less oddly shaped with more room at the edge of the board.

Interesting video, Thank you

WAIT!.. With regards to PCB Holder Number 5 @ 19:16 Is it possible to use the central opening so that the clamps can be screwed inward, ergo having the board central to the PCB Holder? 🤨 Never Mind I just got to the point where you answered my question..

You should clamp one of the magnetic ones in the one that swivels that way you could pull up one of the boards that needs to be in one of them at a 90 degree angle

Will you please make a video on your instruments? I wanted to know which soldering iron you use thats to comfortable in use and mini in size, which hot air gun you use and all other I really appreciate if you make one video about this. Love from Pakistan 💓 and waiting for your response ✌

Have you ever repaired a tech 2 scanner? Mine won't power on. One video shows a dc-dc converter usually faulty. Any info would be appreciated.

It’s okay to compare before suggesting things to others... thanks mr. flash 😌

i after using it quite a bit I suggest the ipinch for cellphone boards , works great and can be rotated for just the right angle without hitting your microscope base.

Does heating reduce the magnetization power of magnetic tips

Nice job and video

Watching here from Doha Qatar 😊

Thank you 💐

Do what I did!!! I got myself a mini lathes bottom piece, you know the part that holds the part to get worked on, and changed the clips, voila...instant multi size board holder, and you can even pivot on three different axis's...works great costs a bit, but did I mention it worked great?

What about Macbook logic boards? Can they fit? If not what's the best holder for larger pcb?

Thank you Sir.

thx a lot , usefull video

Thanks for your video is help me

what's the model number of the last 2 pcb holders?

The qianli ipinch is a brilliant board holder, I think you just got some flux or dirt on the mechanism. You should put your one in a ultrasonic cleaner, it would probably start working again if you did.

I would have asked for the Hakko Omnivise to be included in a comparison, which also differentiates between soldering work and hot air work...

regular watching your videos, i have 1st one pcb holder

Hi Huseyin! I have a question. How we can verify a broken iphone (black screen) if it's a clone 1:1 and it's not a real one? I mean in that case if you want to buy a broken iphone from a guy on the street and you don't have the possibility to open it. THX!

usefull video bro. i found the smaller 'tank'. the 'tank' which you are using too big me. anyway, once again thanks bro.

You are smile any problem solved sir 🙏

5:53 i click like because you use grams

Looking at the condition of the table,any one can predict how much work you have done on it and how much relief and satisfaction you have given to your customer by reparing there gadgets.Just awesome.

Where can i get that silver magnet sir?

Thank you! you saved me 20 dollars

Great Great great Really appreciate it 👌👌👌👏👏👏

is the last one magnetic?

I have the worst one of the 9. I thought it was a little awkward to use. Time to invest in a better one

I am from Indonesia, i like this video

Yes you right. that was the best.

The last PCB holder looks really neat, anyone knows if it's also available in Europe?

I know it's an old video, but surely you are not using that 'previous winner' holder correctly? It looks as though it is designed to clamp the board in the centre, by winding both clamps in onto the sides of the pcb. Looked like the switch board would clamp fine using it that way.

I LIKE YOUR VIDEOS TANKS BRO

Trust me this board holder is a tank I purchased one from them and it’s flawless the best I’ve ever had If you haven’t had one yet then buy it you won’t regret it 👍🇬🇧

Northridge Fix - we wear the threads off board holders in two years. This is how hard we work for you. :-)

I buy one is the best holder !

sir how to get technician job in your firm

nice

I am indian how to purchase magnetic PCB stand

Super board holder

👍👍👍👌👌

HAHAHA cocomellon song! i get it because i have a daughter OBSESSDED with cocomellon.

For me the 5 is the best

💗

Hello friend, please respond. I fix the phones and follow your wonderful channel. I have a request to whom I need plans for all Samsung phones. Please thank you. Please reply

الله ينور طريقك و يوفقك

Not only in Europe my friend, but the rest of the world use cm and gram, haha

You can do infomercials too? is there anything you can't do? Big Boss is right ; you're the boss of all bosses 👌👍👏😊

“Click of Quality”!

شكرا من القلب ❤️

hi do you have a paypal working

review board holder no 2 🤣🤣🤣🤣 This holder Board LEGEND😂😂😂😂

My regards from IRAQ - Baghdad

Selam alejkum brother you ar best

1st

I think board holder number 3 is the best but you gonna need 3 or 4 of them to hold big motherboard

First 👍

I misread it as "hoarders". Sorry.

Late uploaded

👍 تحياتي اخي الكريم