Тёмный

96-00 Civic Hesitation Problems Fixed with New Exhaust Manifold from Maxpeedingrods 

Подписаться
Просмотров 15 тыс.
% 368

MXR Black Friday Sales Page: www.maxpeedingrods.com/2022-black-friday.html?tracking=58deec5d-3b72-49e7-bfe2-aae52bcbb8af
www.maxpeedingrods.com/category/coilovers.html?tracking=58deec5d-3b72-49e7-bfe2-aae52bcbb8af
Use coupon GBH to save 10% on all orders.
My Favorite Products
Wheel Bearing Tool - amzn.to/33IplZZ
Milwaukee Ratchet -amzn.to/3EtpNJp
Jack Stands - amzn.to/3lvA5A2
Cameras used in this video
My GoPro - amzn.to/2YQ3OGZ
My Mirrorless Camera - amzn.to/2HzzFFT
Decals available for purchase here - garagebuilthondas.bigcartel.com/
Send me stuff here!
Jon Widmer
PO Box 13594
El Paso, TX 79913
GarageBuiltHondas
Thanks for watching!
Disclaimer
"Due to factors beyond the control of Garage Built Hondas, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Built Hondas assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair videos. Due to factors beyond the control of Garage Built Hondas, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again, any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Built Hondas."
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll potentially receive a small commission at no cost to you. This will help support the channel and allows us to continue to make videos like this. Thank you for you support!

Авто/Мото

Опубликовано:

 

2 июл 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 76   
@p1epoppa
@p1epoppa 3 месяца назад
Looking good and clean under there!
@phillipbarrett6274
@phillipbarrett6274 2 года назад
Had the same issue. I replaced mine with a two piece unit as well. The problem I ran into with the two piece unit is after time the gasket breaks down and you end up with a pretty bad leak. Replacement gaskets were nowhere to be found and making my own only lasted months at a time. I ended replacing it AGAIN with a 1 piece unit from Rockauto...I believe the one piece is from magnaflow.
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
Thanks for the input. Good info to have here!
@johnwalker9614
@johnwalker9614 Год назад
How long did it take for the gasket to break down?
@jayintwala6807
@jayintwala6807 2 года назад
Thanks for the how to. I almost had to do this on my 98 dx since it had a crack in the same place. I didn’t have any engine running issues and the car passes CA smog very well. But it did have bad gas mileage (200 miles on a tank). Come to find out when I was taking it off to have the crack welded, the o2 sensor came off very easily. I retightened it and I have my good mpg back. Hoping to not have to replace or have it welded.
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
My MPGs are only 25 in this auto y7. Wonder if it'll be restored a little. I'll have to keep track of it.
@ThmsPtrsn
@ThmsPtrsn 2 года назад
That manifold is cool, glad they redesigned to make it 2 piece, easy to make a "track/test pipe" too if it's desired.
@yakusee2680
@yakusee2680 6 месяцев назад
Any examples?
@SubaruDude2005
@SubaruDude2005 Год назад
Hey do you happen to have a link to the manifold? I'm looking to get one for myself but I am noticing two maxpreedingrods websites and I can only find the manifold on one of them.
@Busydadgarage717
@Busydadgarage717 2 года назад
Glad it went easy. I am getting ready to replace the entire exhaust on my neices 04 Element and it has spent its entire life in IN. Going to be a lot of cutting I am guessing!
@ernestovelazquez369
@ernestovelazquez369 2 года назад
I had an element catalytic converter that I sold for $900 to a recycler on Facebook, then I used that money to buy the exhaust 😅
@Busydadgarage717
@Busydadgarage717 2 года назад
@@ernestovelazquez369 now I have a new plan!
@Option23AP1
@Option23AP1 2 года назад
Yoooooo Widmer!!! It’s Jerry (JLuda) from back in the day! Just wanted to shoot you a shoutout and glad to see you still doing your thing in the Honda game 👍🏼awesome channel bro!
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
What up man!!?!! Good to hear from you! Thanks homie! You still in EP?
@Option23AP1
@Option23AP1 2 года назад
Yea man still reppin Chuco 🤙🏼lol
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
Nice man, should hit up one of the Honda meets. You'll see a handful of peeps you know. It'd be cool to catch up too
@Option23AP1
@Option23AP1 2 года назад
Due I’m in!!! 👍🏼I miss them good ol’ JDM meets, it’d be dope to catch up with everyone.
@nathangerow4562
@nathangerow4562 Год назад
Hey just curious how well/ long did this hold up. I just got a 2000 dx coupe with a cracked manifold. Im wondering what my best replacment options are.
@GarageBuiltHondas
@GarageBuiltHondas Год назад
This is your option. It's inexpensive.
@Cherokee93
@Cherokee93 Год назад
Mines cracked in the same exact spot I’m gonna try welding it up
@GarageBuiltHondas
@GarageBuiltHondas Год назад
Let me know how it works out!
@anggelobelletti4027
@anggelobelletti4027 17 дней назад
Did it work ? Mine is cracked too and I'm debating on what to do?
@Cherokee93
@Cherokee93 15 дней назад
@@anggelobelletti4027 just replace it it didn’t work
@Cherokee93
@Cherokee93 15 дней назад
@@anggelobelletti4027 I ended up selling the car but yeah it was still leaking after I welded it
@geramane5184
@geramane5184 2 года назад
Any help/tips works! Before I give up I have a 1991 civic sedan the problem with it when you turn it on and let it run for 1min it starts to slowly bog down and dies the exhaust takes out light clear smoke I change the spark plugs fuel filter and temperature sensor and thermostat any more ideas on what to do or how to fix it no check engine on
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
Verify correct fuel pressure. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-i9t9OapKffg.html
@yakusee2680
@yakusee2680 6 месяцев назад
Just replaced mine with the 2 piece now there is smoke coming from the top as if the gasket are leaking or something
@rpmwizard
@rpmwizard 2 года назад
I had a 98 EK and when I installed an aftermarket 4-2-1 header on it, the oem header also cracked in that same spot. The O2 sensor was a real pain to get off the header, I used PB Blast to help with getting it loose
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
Thanks for the input!
@rpmwizard
@rpmwizard 2 года назад
I do currently own a 2012 lx 5speed and a 94' gsr. The gsr was a one owner before I bought it and had not been modified in any way. He sold it to me for $1000 and I drove it home. It needs some regular maintenance items replaced. It's work in progress lol
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
Even the nicest ones are a work in progress. There's always something that can be fixed or replaced. At least you own one now.
@darealoscar
@darealoscar 2 года назад
Can anyone help me I need to find out the size of the 9 nuts that hold the manifold and head together . My cat got stolen out of my 99 and those are the last parts I need to get it all hooked up. Thank you!
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
I'm 90% sure this is the size you need. amzn.to/3IhFSnJ
@JustinsReviewChannel
@JustinsReviewChannel Год назад
What are these manifolds made out of?
@GarageBuiltHondas
@GarageBuiltHondas Год назад
Cast iron.
@PlasticDrummers
@PlasticDrummers 2 года назад
Ah yes my old lady’s hatchback has this cracked manifold as well. Grabbed my mig welder and some blue demon and patched it up lol her hatchback has d16y7 in it but I converted it to y8 head intake ecu vtec setup. Passes ca smog just fine and currently averages 37-39 mpg 🤷‍♂️
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
👍
@PlasticDrummers
@PlasticDrummers 2 года назад
Have you had any bb6s? That’s been my latest midlife crisis buying my first 5th gen prelude lol
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
Never owned a prelude. Sorta cool but I don't really care to own one so never tried to.
@PlasticDrummers
@PlasticDrummers 2 года назад
@@GarageBuiltHondas I felt the same way cool car didn’t really want one. Took 25 years of growin on me to get one lol the Honda meet in may after seeing a few i finally decided to suffer. Anyways love the vids keep up the good work
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
Very cool, hope you end up enjoying it!
@alonzocates4742
@alonzocates4742 2 года назад
Is this manifold California carb compliant? Thank you
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
No
@alonzocates4742
@alonzocates4742 2 года назад
@@GarageBuiltHondas dam thanks for the feedback
@yandel11210
@yandel11210 9 месяцев назад
Can any exhaust manifold leak cause car speed lagging?
@GarageBuiltHondas
@GarageBuiltHondas 9 месяцев назад
Yes, especially if you're o2 sensor is affected.
@yakusee2680
@yakusee2680 6 месяцев назад
Did you get a code ?
@GarageBuiltHondas
@GarageBuiltHondas 6 месяцев назад
No
@rendiix4269
@rendiix4269 Год назад
Do you have any idea to fix tht krack
@GarageBuiltHondas
@GarageBuiltHondas Год назад
Weld it
@rendiix4269
@rendiix4269 Год назад
@@GarageBuiltHondas i did lst time and its cracked again it last like 3 days , maibe use the wrong soldering
@yakusee2680
@yakusee2680 7 месяцев назад
Impossible to pull it out from the top? Instead of jacking the car up and pulling it out from bottom ?
@GarageBuiltHondas
@GarageBuiltHondas 7 месяцев назад
It didn't seem like there was enough room.
@yakusee2680
@yakusee2680 6 месяцев назад
Pulled mine from top, had to reposition the exhaust manifold so I can remove the upstream 02 sensor with extension by putting it through between A/C and heater hoses and the whole piece came out pretty easy.
@chidvon5064
@chidvon5064 Год назад
Thanks 🙏
@GarageBuiltHondas
@GarageBuiltHondas Год назад
Hope it helps!
@The_Redkween
@The_Redkween 2 года назад
Maybe those four extra nuts go on the short-side of the studs?
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
I didn't have a use for them, and didn't see a spot for them to work on anything. I just tossed them into my spare but bin.
@Buff008
@Buff008 Год назад
What size are those 4 nuts ? I’m currently having trouble keeping it from falling and in place
@BLAZEPSI
@BLAZEPSI 2 года назад
Can the Crack on the Manifold be welded?
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
Yes
@JohnnieIsBored
@JohnnieIsBored Год назад
cant you just take it to the muffler shop and get it weld on?
@GarageBuiltHondas
@GarageBuiltHondas Год назад
You can try.
@ernestovelazquez369
@ernestovelazquez369 2 года назад
I have sold my previous stock ek cats for like $300 each to a guy on marketplace
@Longtrailside
@Longtrailside 2 года назад
Be careful witht those aftermarket cats. Had one collapse and burn an exhaust valve in under 50,000 miles.
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
Thanks for the input!
@Longtrailside
@Longtrailside 2 года назад
@@GarageBuiltHondas If you start getting an unknown misfire for no reason, pressure check the cat. The honeycomb is not honda quality. This happened in a grandma car so no hot rodding or mods on engine, just a daily driver.
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
This one will be daily driven also, it's an automatic cruiser.
@MrTakeOne
@MrTakeOne 2 года назад
Mines is sluggish idk what to do 140k miles 00 DX
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
Try a tune up. If you have any CELs, figure out what they are and fix them.
@bungendores_finest
@bungendores_finest 2 года назад
American models have the weirdest factory manifold setups. Australia / Japan’s setup has the expansion chamber after the oil sump not up beside the block. So weird.
@tihiboomtihiboom9346
@tihiboomtihiboom9346 2 года назад
U didnt instal 4.2.1 not col
@GarageBuiltHondas
@GarageBuiltHondas 2 года назад
Of course not. It's a daily driver. Plus it's automatic. That 4-2-1 isn't doing anything for a sohc automatic.
@isaiahpeters6432
@isaiahpeters6432 2 года назад
🔥🔥🔥🔥😇😉🍻🍺
@djohnnineonesix820
@djohnnineonesix820 2 года назад
They crack because the cathalitic converter is too close to the head. Cathalitic converters get hotter than the cylinder heads so is fighting the cooling system and that provokes the crack. Is better have the cathalitic converter where the EX have it.
@Yaboii336
@Yaboii336 11 месяцев назад
Just take it an get it welded cheaper