A Day in the Life of a 3D Print Farmer (Open to Close) 3DPD 3D Printer Farm Life

Подписаться 6 тыс.

Просмотров 206 тыс.

50% 1

Here's a glimpse into my daily routine in running a 3D Printer Farm. It's not a turn key business as I had hoped starting out, but I really enjoy it and it makes me happy.
Subscribe and hit the bell to see new videos: tinyurl.com/y42f4ydp
If you'd like to see a specific area of interest covered, please leave a comment in the section below!
FINISHING TOOLS:
3D Print Finishing Tools: amzn.to/3y4wFKm
Heat Gun: amzn.to/3IzwBqP
Ergonomic Pliers: amzn.to/3elgEqw
LED Magnifying Lamp: amzn.to/3Dz7lgU
BSI Gap Filling CA Glue: amzn.to/3lL9Ne8
BSI CA Accelerant: amzn.to/3oyqMlr
Super Glue Tubes (12): amzn.to/3y6NqVd
SHIPPING AND ORDER PROCESSING
Dymo 4XL Thermal Label Printer: amzn.to/3IrUYHb
Cheap Bulk Shipping Labels: amzn.to/3rLqkCx
Brother Laser Printer: amzn.to/3dzepzk
Cheap Computer: amzn.to/31KOphG
My Favorite Keyboard: amzn.to/3rMTq4k
AIR QUALITY MANAGEMENT
HEPA and VOC Filter Unit: amzn.to/3e9I8z2
Air Quality Monitoring: amzn.to/3GVRFXa
FARM MANAGEMENT
Raspberry Pi 4: amzn.to/3IrYzVH
Raspberry Pi 3B: amzn.to/3rN3w5p
Ender USB Cables: amzn.to/3oBKHjM
Prusa Mini USB Cables: amzn.to/3oCsCSF
8TB Network Attached Storage: amzn.to/3pVQSyD
TP-Link 8 Port Hub: amzn.to/31yNUrE
TP-Link 16 Port Switch: amzn.to/3IyG6GG
BUSOHE Cat 7 Ethernet Cables: amzn.to/3rHn3Em
FILAMENT STORAGE
Storage Containers: amzn.to/3sAMoA4
Filament Dryer: amzn.to/3estrYm
NOZZLES AND TOOLS
E3D Nozzles: amzn.to/3GrmEKc
Creality Nozzles: amzn.to/3oAmIS3
6 in 1 Nozzle Tool Kit: amzn.to/3GpjLtn
PRUSA MINI MODS
Legit BondTech Gears: amzn.to/3ExesYm
Budget BondTech Gears: amzn.to/3GovqIR
E3D Metal-Only Kit: amzn.to/3rSDDRT
Filament Runout Sensor Kit: amzn.to/3Gu3SlF
FYSETC Textured PEI Build Surface: amzn.to/33cYbKv
Mini Heat Sock: amzn.to/3oCiysw
Capricorn PTFE Kit: amzn.to/307h00v
Disclaimer: These are affiliate links in which I earn a small commission on purchases made. As an Amazon Associate I earn from qualifying purchases.
#3DPD #3DPrintedDebris #3DPrinterFarmLife
Timecodes:
0:00 - Intro
00:23 - 0930 Harvest
01:31 - 0940 Setup
04:48 - 1000 Finishing Session
09:47 - 1200 Walkaround
11:01 - 1200 Setup
12:04 - 1200 Finishing Session
12:39 - Mini Nozzle Change
13:34 - 1400 Walkaround
15:30 - 1400 Finishing Session
16:30 - Shipping Prep
20:35 - End of Day Closeout
20:54 - 1600 Harvest and Setup
23:00 - End of Day Walkaround
25:24 - Farm Metrics

Наука

Опубликовано:

2 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 601

@3DPrintedDebris 2 года назад

Here's my daily routine running a 100 strong 3D printer farm! Timecodes: 0:00 - Intro 00:26 - 0930 Harvest 01:31 - 0940 Setup 04:48 - 1000 Finishing Session 09:47 - 1200 Walkaround 11:01 - 1200 Setup 12:04 - 1200 Finishing Session 12:39 - Mini Nozzle Change 13:34 - 1400 Walkaround 15:30 - 1400 Finishing Session 16:30 - Shipping Prep 20:35 - End of Day Closeout 20:54 - 1600 Harvest and Setup 23:00 - End of Day Walkaround 25:24 - Farm Metrics Subscribe and hit the bell to see new videos: tinyurl.com/y42f4ydp

@alexdubois6585 2 года назад

Thanks for sharing. Interresting. Wouldn't it be worth it to invest in IDEX and use disolvable support if you spend so much time removing support?

@3DPrintedDebris 2 года назад

@@alexdubois6585 I might in the future! BVOH and PVA didn't perform well enough for me to commit to it a couple of years ago. Perhaps it is time to dive back into it.

@Anyone700 2 года назад

@@alexdubois6585 You are left with tons of water that is illegal to dump down a drain and can hurt your septic. Also keeping it dry is a massive pain even an hour outside a sealed humidity controlled chamber can give bubbles. Not to mention if it gets left in a heated hotend for too long it turns to sand risking a clog. Using PETG/PLA interchangeably as breakaway support with each other is a far better solution.

@alexdubois6585 2 года назад

@@Anyone700 Also correct, you can disolve a fair amount before needing to change the water, or let it dry. It is also that or plastic support. So I don't know what is the best ecological footprint. None is great I agree.

@srikrishnasaichitakana773 Год назад

This means that single operator can handle 100 - 3d printers ? Is it possible?

@MrButuz 2 года назад

Great and really interesting video. I've just doubled my farm size tonight, from one to two printers!! :D

@3DPrintedDebris 2 года назад

Thank you! Onward and Upward!

@GeoFry3 2 года назад

100% growth! Soon you will have an unstoppable robot army!

@3DPrintedDebris 2 года назад

@@GeoFry3 ahem.... unstoppable EVIL robot army.

@GeoFry3 2 года назад

@@3DPrintedDebris lol no, that is what one builds will with the 3D printer robot army. Robots with freaking laser beams on their heads.

@adamhorn8414 Год назад

Im about to double the size of my farm too, already have a mk3 im about to get a mini just so i can double my print speed for my own projects!

@gator7905 2 года назад

Its very handy to have the urinal in the print farm. LOL

@3DPrintedDebris 2 года назад

Yessir it is! One of these days I'll actually clean it.

@lazyman1011 2 года назад

Also thought about the perfect productive room layout. The smell in it must be also very special.

@3DPrintedDebris 2 года назад

@@lazyman1011 No smell, I have HEPA filter units and I blow out the heat a couple of times a day. The shop has a roll-up garage door and front door. I just open those up and the desert wind takes care of the rest.

@lazyman1011 2 года назад

@@3DPrintedDebris Nice place, directly felt like a garage. Wish you all the best for your business. It was inspiring and a learned something.

@antlu65 2 года назад

Fascinating, always wondered how these operations are run. Also, dont have to run far to use the urinal! 😂

@3DPrintedDebris 2 года назад

It does same a a lot of time for sure!

@Infernoblade1010 2 года назад

🤣🤣🤣🤣🤣

@andrewrobinson28 9 месяцев назад

I hope it's 3d printed..

@nickdarrow4873 2 года назад

I have a print farm in the room next to me, but for some reason I love re-watching this video. Especially while grinding into the early morning hours tending the farm. Love your content- hope you get the time to make more.

@3DPrintedDebris 2 года назад

Thanks!

@lazyman1011 2 года назад

Thanks for sharing! Reminds me when I've got my first printer and had the feeling it needs to run 24/7.

@3DPrintedDebris 2 года назад

It starts with 1.... next thing I knew I had 100.

@Dras1172 2 года назад

I went from hearing about consumer 3D printing, and not caring about it, over the last few years to becoming utterly obsessed with printing over the last 6 months or so. It was great to see what a day in the life is like for you as this is certainly something I plan to do in the future, though on a much smaller scale from my garage. What got you into printing initially, then pushed you into farming full time? Definitely subbing and am about to run through all of your videos so thank you for the content!

@3DPrintedDebris 2 года назад

I release a video on how it all began here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XtNUq2rOr5Y.html Thanks for the sub!

@raybang9891 Год назад

Awesome video! Thanks for sharing your daily labor! Makes me laugh even more when i think of previous comments and videos when they say they do "passive income" doing 3D printing... 😂 my only printer already gives me enough struggle to not consider it "passive" hobby! ;)

@ansphotographics 6 месяцев назад

thanks for showing the raw side of running a farm. no fancy lights no fancy crap! cheers!

@IAmTheCraftsman 8 месяцев назад

Liked, Subbed, and commented Sir. I just got my first 3d printer a few weeks ago (Ender 3 V2) and it's been very fulfilling to a techy, creative, nerd like myself. This video has shown me a world I had only heard about. Thank YOU!!

@3DPrintedDebris 8 месяцев назад

Thanks for the sub!

@henricoderre 2 года назад

I appreciate your videos and insight into 3D print farming.

@3DPrintedDebris 2 года назад

My pleasure!

@hoodie_tee Год назад

Probably one of the most fascinating videos about 3d Printing I've seen thus far.

@3DPrintedDebris Год назад

Thank you!

@jaredschwartz153 2 года назад

My print farm has taken over my entire apartment. I am working on saving up for a warehouse, though. I can't wait to keep growing, and I'm happy to see other successful people. I just got in 4 form 3s to take my resins to the next level.

@3DPrintedDebris 2 года назад

I'm not a fan of the Form 2 or 3, due to the RMA costs and the high price of resin. If it were me, I'd go with the Elegoo SATURN instead.

@jaredschwartz153 2 года назад

@3DPrintedDebris I personally dislike lcd printers and get way more reliability with my formlabs line up. One click ready to go. I modified my resin cartridges (can get about 20l out of them) and bulk order resin specifically made for formlabs printers about $40 a liter ordering in 10 gal intervals. I also modified my tanks, replacing the acrylic sheets with glass, and I have about 5 gallons of optically clear silicone for them. Making my tanks cost about $7 a full restore. That is what I use for my online retail (cosplay props), which brings the cost down quite significantly for my customers. I personally need the line up of materials formlabs provides as most of my printing is for businesses needing abstract requirements. When I need to use an expensive engineering material every liter counts, and I can count on my formlabs. But for what you do, the chinese lcd printers make sense. Thanks for the reply, and keep up the grind!

@flamaest 2 года назад

Wow, what an incredible video. Had no idea there was so much involved in a printer farm.

@3DPrintedDebris 2 года назад

Glad you enjoyed it!

@jhsevs Год назад

The urinal in the corner and the kitchen back to back are the cherries on top of this great video dude!

@3DPrintedDebris Год назад

59th person to mention the urinal

@jhsevs Год назад

@@3DPrintedDebris I couldn’t find one before commenting myself

@markwhiting4669 Год назад

Hi there, very interesting about what it would be like running a print farm. Can I ask where you got your round stackable filament tubs that you have on the shelves with little blue clips, are they designed for filament or just regular round tubs, for like cakes???? And do you put anything in with them so stop moisture?

@HotCarTrack 2 года назад

Great vid mate, I'm running 4 MK3s and hope to expand one day. I'm interested in your power cost method.

@3DPrintedDebris 2 года назад

Thanks! I'll do a vid on that in the future.

@Liberty4Ever 9 месяцев назад

Thanks for this behind the scenes video. On demand printing is a tough business and your efficient and orderly operation are essential. I run a much smaller print farm printing functional designs that I create for niche products. I'm able to design the parts for 3D printing so they need no support material and that's a huge time savings. You've forgotten more about post processing FDM prints than I'll ever know. I print a lot of black TPU, so my post processing consists of a quick pass with a heat gun and lighted and magnified inspection. I do 100% pull testing to verify layer adhesion but it's never a problem. How do you handle end of spool waste? On my PLA prints and ABS prints, on the new Neptune 4 Pro printer, I can run a reel empty and if the print stops anywhere other than the outer layer (and that fortunately always seems to be the case), I can swap to a new real and click "Continue" and the print is perfect. On ABS, I use 2.25 kg spools. Klipper has been a game changer for me, for print quality, faster speed on everything but TPU, and much better 3D printer management. 1:50 - Your print farm has a urinal? That may be taking labor optimization a bit too far. 😀

@FullCircleTravis 7 месяцев назад

I have a 2-piece bathroom in my garage. I'm re-finishing right now with a slate floor. Should be a nice place to take a shit.

@eatxthatx2k9 2 года назад

Thanks for the great video to give insight of what it really takes to run a print farm! What can shrouds are you running on the i3 prusas? I've never seen that design before.

@3DPrintedDebris 2 года назад

It is just the standard MK3S+ fan shroud. The design performs well enough I didn't see a need to fiddle with it.

@user-ez4sl3ku8v 9 месяцев назад

I have an 8 printer farm. The only noticeable difference is most of my printers are making stock across my whole colour range so I am not swapping colours. Much less printing on demand. I get a 6 x volume at Christmas so this is a better model for me. I know from the past how many to keep of each colour. Print on demand is for personalised stuff and uncommon orders..

@3DPrintedDebris 8 месяцев назад

Cool!

@WhereNerdyisCool 2 года назад

I'm curious about your air quality and fire suppression/detection setup? I work in a research lab and the experts we speak to about VOCs/Nanoparticles and general off-gassing is downright scary. So, when I see a setup like this, I wonder what you do? (Not criticism, just very differently than I do it!)

@3DPrintedDebris 2 года назад

Currently I only work in HTPLA and PLA+, so that buys down a lot of those concerns right off of the bat. We tend to print no hotter than 210-215, and the RH here is almost always 10% so there's no pops or steam. I have multiple air quality monitors around the shop, and I have large volume HEPA filters next to our work areas (finishing station, production control). Additionally, I have a forced air HVAC system with a filter on that, and I do tend to blow all the heat out of the shop every night by opening up the doors and letting the desert do it's "thing"./

@dittagecoeco2738 Год назад

Master at work! Thankyou for the share

@3DPrintedDebris Год назад

Glad you enjoyed it!

@andreaseriksen1247 2 года назад

Hi and thanks for sharing! I noticed you seem to be using printed belt tensioners for some printers, what's your reason for and experience with that? I figured they would sag or break eventually, and was looking for metal ones for my plain ender 3, but now I'm curious. Any recommendations for a good design?

@3DPrintedDebris 2 года назад

It makes maintenance so much faster to just turn the knob instead of loosening the OEM hardware. I think all of the newer enders have them standard. Mine pre-date even the bed wheels. I'll do a review/mod vid here soon on the Ender 3 and link all of the mods I use.

@dronefootage2778 6 месяцев назад

i loved this video, so peaceful :)

@winslowjoy2629 2 года назад

Just came across your channel and love your content. I do have a question? You mentioned that you monitor and collect data on power consumption on a daily basis. I understand power cost a component of price. You have data on each machine type. Overhead energy costs for lights, HVAC, maintenance equipment should be averaged across the entire year of consumption. I totally understand collecting the data but at a daily data point I find curious.

@3DPrintedDebris 2 года назад

I total up the daily profit, and my end after all costs are settled. It's a tad OCD for sure.

@kenlipper874 2 года назад

I was waiting for the bathroom break! Mate, you're so damn organised!

@3DPrintedDebris 2 года назад

Thank you!!

@123loopyman 2 года назад

He keeps the bathroom in his shop if you couldn’t see the urinal. That’s his secret to success

@3DPrintedDebris 2 года назад

@@123loopyman LOL

@FunoXXX Год назад

that is such an interesting video! Thanks for sharing!

@3DPrintedDebris Год назад

Glad you enjoyed it!

@goatpepperherbaltea7895 7 месяцев назад

5:07 filler on printing busts? As in the pellets are inside of the busts? How does that work

@yourlocaltoad5102 2 года назад

A Video on how you finish prints to make them look perfect would be very interesting

@3DPrintedDebris 2 года назад

You're in luck, I have the footage together. Just need more time. Do you know how I can get another hour in the day? Like 25 instead of 24?

@shawz10 2 года назад

I'd also like to see how you finish the prints!

@michaelcutler7481 2 года назад

I'd love to hear more about your Prusa MINI modifications. They all appear to have V6 hotends? Have you covered these mods in another video?

@3DPrintedDebris 2 года назад

yeppers, check this out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-W5fycPPCwyo.html

@GeoFry3 2 года назад

What is your favorite filament and what are your top favorite printers? When it comes to filament sensors I just remove it with a small piece if filimament stuck in. The only time I hook it back up is for big prints on questionable length partial spools.

@3DPrintedDebris 2 года назад

Probably ProtoPasta at this point, and the MK3S+. About 15% of my sensors are inop, I'll pay off this maintenance after the holiday rush has passed. I use them to get rid of partials that are well matched.

@daniell2574 2 года назад

Nice vid. Just an idea: couldn't you cut down your power costs drastically if you had an isolator under every heatbed? The heatbed with 200-300 W/h is the most powerconsuming part of a 3d printer.

@3DPrintedDebris 2 года назад

I went through a glue phase for a while to eliminate the heated bed, only to find it slowed the harvest and setup time way down so that any power savings were sacrificed to labor costs. I do have insulating pads under all of the chinese beds, and it did reduce the power consumption of the rack by about 20%.

@ikmalxhakim4419 2 года назад

Thank you so much for this wonderful video!

@3DPrintedDebris 2 года назад

You are so welcome!

@silverwaffles 2 года назад

Really interesting video. What are the articles you're adding to the finished models? Are they to tack who it's made for?

@3DPrintedDebris 2 года назад

I add a logo sticker and URL to every model for return customers.

@karmaq8462 Год назад

This is awesome. I hope one day I can have a print farm so far I have two resin printers and a fdm , my fdm one isn't working though , I need to look at it again .

@3DPrintedDebris Год назад

You can do it!

@gladiatormechs5574 Год назад

Here is a guy who works efficiently, MOVES FAST and refuses to waste any time... with that urinal in his work shop... and his porta potty, This guys got it down.

@3DPrintedDebris Год назад

Thanks! I spent years refining it. I jealously guard every second!

@Joshua11Saragih 4 месяца назад

Your avarage day is my dream, I have only 2 3d printers for now, planning to get more

@rishiagarwal2071 2 месяца назад

which software do you use to manage your farm and print queue

@snowwolvesproductions 2 года назад

I see you have several different model machines. Other than bed size, are there any reasons you have so many different ones? I thought I saw quite a few resin printers too... Do you run them too? I have one Mars pro 2 and one Sidewinder x1. I'm thinking of trying to start something too. Thanks, Great video!

@3DPrintedDebris 2 года назад

A lot of it was cost vs. time at the time. If you have little money and a ton of time, go Creality. If you have a ton of money and no time, go Prusa. Going forward I will be phasing out all of the Enders for something with a similar volume. I'll probably go with modded clones. The resin rack gets about $2,000 worth of work a month, and isn't something I do D2C. That rack is B2B only, and I pretty much scaled it to grow with one of my client accounts. I did a vid on a typical production run here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yfJgc8yfulk.html

@jeffjefferson4624 2 года назад

Hey Im Running a prusa Mini + Farm and they’re all stock. I was curious if you upgraded something on your minis? Many people told me to get bondtech extruder and heatbreak but I made bad experience with both of these

@3DPrintedDebris 2 года назад

Buy have I. Check this out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-W5fycPPCwyo.html

@MrKennykyle1 6 месяцев назад

what software did you use on your pc first few moments in the video?

@aussiegolddogcnc3d412 2 года назад

Great video mate. Any chance on seeing how to use some of the software to run the print farm. Cheers Robert

@3DPrintedDebris 2 года назад

Check this out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qPcq53zWjM8.html

@mjordan812 9 месяцев назад

Loved the urinal on the back wall. Efficiency!

@3DPrintedDebris 8 месяцев назад

It's quickly becoming famous. I'm considering making a video just about that.

@LudwigRuderstaller 2 года назад

Nice. Thank you. Wanna make a video on your support cleaning process seems effective.

@3DPrintedDebris 2 года назад

I hadn't considered that as a topic, thanks for the idea!

@mariogayoso 11 месяцев назад

Very cool ! How are you managing the printers (octoprint,kipper, etc

@triadnlphotography1313 2 года назад

Nice video, Buy hikvision dome place 1 or 2 middle of the room to see around in the whole room. You can move the dome from home. And you would have really Nice videoquality. You have a lot of options with a hikvision or dahua dome. Keep up the great bisness

@3DPrintedDebris 2 года назад

Thanks for the tips!

@fellzer 2 года назад

I saw some research that looked into smart particulate matter given off by various types of filament. ABS was of course horrible but PLA also had a fair amount. Are you at all worried about that in the long term?

@3DPrintedDebris 2 года назад

I speak to that in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iKInGAKbQI0.html

@eliezedeck 11 месяцев назад

I'm wondering: what's the heat gun used for?

@the23er 2 года назад

You mention a pelletizer for the support material? What do you do with that and what does it do?

@3DPrintedDebris 2 года назад

That will be in a later video for sure!

@nash2337 2 года назад

Hi Excellent Video, thanks!. what is the power monitoring and logging software you use as well as the printer server software ? I am thinking to get into this line of work as I have retired and trying to get a handle on it all. Your help much appreciated.

@3DPrintedDebris 2 года назад

For power logging I have a stand-alone meter on the mains to the shop that I take a reading on every day. Network and control can be seen here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qPcq53zWjM8.html

@mcgeedigital 10 месяцев назад

As a newbie to this all, I’d be interested in a video on the business end of finding the work for all of those.

@MiningMagnets 2 года назад

Hey I was currious are you running ocroprint on those pc's under your printers? I'm at about 17 printers now and looking to move away from the SD cards. I've got a linux computer I'm working on installing multiple instances of octoprint and wondering how many printers can a migrade pc handle? Thanks

@3DPrintedDebris 2 года назад

Those are actually UPS. Here's a vid I did on C2: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qPcq53zWjM8.html

@MiningMagnets 2 года назад

@@3DPrintedDebris Heading there now.

@Sonderax 2 года назад

this is actually rly interesting to watch. We brought 2 printers in late november 2021 and just ordered 2 more as weve seen a large influx of orders. Interesting to see how somebody who does this for their job manages it

@3DPrintedDebris 2 года назад

It's a fun job, but it's still a job!

@thedarkknight6159 2 года назад

Hi, on which platform are you selling or do you have a website? And who are your customers? Students? Engineers? Tech nerds? Best regards from Germany!

@3DPrintedDebris 2 года назад

@@thedarkknight6159 I sell on Etsy & eBay, and I have a stand-alone website.

@Weirdomanification 9 месяцев назад

Nice workflow and layout!

@3DPrintedDebris 8 месяцев назад

Thank you!

@amats3 2 года назад

Yes. Your prints really do look fantastic. 💪

@3DPrintedDebris 2 года назад

Thanks! Some of it is the manufacturers and their progress over the years, some of it is mine with the design of the racks and the controlled environment as well as designing the models to cater to the strengths of the tech.

@BresStephane 10 месяцев назад

Thanks for sharing your day super intresitng. How do you handle the shipping, do you have a bunch of different box sizes ?

@3DPrintedDebris 8 месяцев назад

I have about 1,000 mixed sizes on hand as well as a peanut dispenser and large rolls of bubble wrap. I need to do a video on the packing room.

@MichelleGianni Год назад

Great video! which printer produces the best print and is more liable as a workhorse? I see you have a variety of them

@3DPrintedDebris Год назад

Prusa MK3S+ hands down. If I were to add more FDM, it would be more of those.

@AsbestosMuffins 2 года назад

quite interesting, how do you deal with the finicky startup and bed adherance issues? Im rather new and have to watch 1 printer like a hawk for the first 20 minutes, let alone your farm

@3DPrintedDebris 2 года назад

I've done away with finicky startups with proper hygiene and harvest practices. I don't wait for the first layers anymore, just do a walk-around.

@macombiam 2 года назад

Which camera mount are you using for your MK3 Printers? Would appreciate a link if possible. Thanks for the great video.

@3DPrintedDebris 2 года назад

I'll have to dig that one up. I don't remember off of the top of my head.

@sonnychiba5270 8 месяцев назад

i love that you have a urinal installed in the production area

@3DPrintedDebris 8 месяцев назад

It's quickly becoming famous. I'm considering making a video just about that.

@JamoDog 29 дней назад

What shelving units are those? Looking to upgrade myself. Are they sturdy? Vibrations?

@V1N_574 Год назад

have you pondered the integration of a dual nozzle printer where one of them is exclusivly for water soluble filament to printi supports?

@3DPrintedDebris Год назад

I tested PVA and BVOH, and it takes too much time to dissolve, and then there's the issue of disposing of the dissolved solution. I might return to it, but for now it's an expensive add that I'm not sure is worth it.

@prawncracker1304 2 года назад

If you were just starting out - what printer would you buy? would you go for a cheaper one like an ender or (knowing what you know now) go for a more expensive one (I assume the print quality is better).

@3DPrintedDebris 2 года назад

I would figure out what product I want to make first, then let build volume guide the purchase as well as material handling ability.

@chris76579 2 года назад

Awesome video 👏 I’m wondering, have you considered using injection moulding considering the amount of products you sell? Have a nice one!

@3DPrintedDebris 2 года назад

I did the math on the mold costs vs. my order volume, and no one subject in my portfolio warrants production at a large scale. it's both a strength and a weakness in the business model at the same time.

@timothytherrien3624 2 года назад

instant subscription from myself. Curious however, Been looking into expanding my farm a bit. I only run 2 printers. A heavily modified ender 3 running klipper and a prusa mk3s+. Looking into a 3rd or possibly 4th printer and noticed you have a handful of prusa clones. I myself have been looking into the clones as they are less than half the price shipped so that could help me to justify buying the 4th printer. I understand that its luck of the draw with some parts and how quality of bearings/rails/motors you'll get. was your experience with your many clones good? did you upgrade those clones at all? Basically im thinking on getting the clones then upgrading the motors and I already have backup rails/bearings for if the ones included are junk. Thanks again Tl:dr curious if you like your prusa clones and if you had any issues with them. Thanks

@3DPrintedDebris 2 года назад

Here you go: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tNtWpN-rPtU.html

@VegascoinVegas 2 года назад

So glad you didn't need to take a leak during all those hours of time lapse.

@3DPrintedDebris 2 года назад

Ha!

@dronefootage2778 6 месяцев назад

can you tell me what the name of the song is that is in the beginning, starting around 0:30? I really like it.

@jayedhasan4835 2 года назад

Neitzche's head on the table looks good!! Is there any option to order custom-painted models?

@3DPrintedDebris 2 года назад

I used to, but it adds $100 to the price to do the paint job. Most people aren't willing to pay that.

@irwinpks 2 года назад

do you use a 3D printer management software? if so, what is it and where can it be acquired from?

@3DPrintedDebris 2 года назад

Check this out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qPcq53zWjM8.html

@TimJonas 2 года назад

Hi, great video! Where did you find all the models you showed in the video or did you make them yourself?

@3DPrintedDebris 2 года назад

Almost everything I sell is original artwork, somewhere in the order of 90%.

@stoniebro-nies Год назад

Quick question probably obvious. Do you print in dynamic “0.16” or standard “0.2” quality? I print only in dynamic quality and it turns out exactly how I expected it to but just wanting to know what a professional uses for layer heigh.

@3DPrintedDebris Год назад

It depends on the size of the model.

@dabandel 10 месяцев назад

Just noticed the urinal on the wall. Handy. 😆

@3DPrintedDebris 8 месяцев назад

It's quickly becoming famous. I'm considering making a video just about that.

@treemot2417 10 месяцев назад

Living the dream!!!

@3DPrintedDebris 8 месяцев назад

Yep!

@Winter1x 2 года назад

Great video, totally got thrown off by the urinal in the corner! 😆

@3DPrintedDebris 2 года назад

For some reason everyone latches on to that.

@madnlooney 2 года назад

Do you run any type of Filament tracking? Or just play the spools by eye?

@3DPrintedDebris 2 года назад

I have a couple of methods I will detail in a later video.

@Blackburnerable 2 года назад

Where did you learn the managerial side of things? I want to start my own print farm but I don't know what my first steps should be, or how to run the business

@3DPrintedDebris 2 года назад

I actually founded a company prior to this one where I took all of my hard knocks in business. Your first step is to decide on a product you are passionate about, and then see what core tech can fill the production need. If it's 3D printing, great. If it's CNC or laser cutting, go that route.

@BorisH2000UK 2 года назад

Really useful video, thanks for sharing

@3DPrintedDebris 2 года назад

You're welcome!

@markgrayson4460 Год назад

Do you use ups for each printer or do you have them on banks? If so which ups do you use ?

@3DPrintedDebris Год назад

I have a video about that.

@planetace3227 2 года назад

Nice workflow and a nice Printfarm, very organized! What type of controller software you are using for the farm?

@3DPrintedDebris 2 года назад

I show that in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qPcq53zWjM8.html

@Dreadnoks13 2 года назад

Hi! Thank you for the video. What printers are you running? Do you find them easy to maintain and are replacement parts easy to obtain? I currently have one FDM and one resin printer, and I’m looking to expand.

@3DPrintedDebris 2 года назад

Check out my channel, I've put up 31 vids speaking to those very topics!

@Dreadnoks13 2 года назад

@@3DPrintedDebris I am doing just this, and subscribed. Thank you!

@SchwartzMonster Год назад

what cooling fan assembly do you have on your cr-10?

@3DPrintedDebris Год назад

It's the E3D modular hotend design off of Tverse, with dual 5015 fans.

@Anyone700 2 года назад

Using PETG/PLA interchangeably as breakaway support with each other is a far better solution. Qidi iFast with servo lifting of the unused hotend is a very compelling value. Dissolvables, same material supports, and IDEX all proved to be too much trouble for me.

@3DPrintedDebris 2 года назад

With my aspirations of recycling, I don't see a good fit for another opportunity to cross-contaminate polymers. Thanks, though!!

@UnitedGloryMedia 2 года назад

Got any more info on this process? It sounds like something I would want to incorporate for the types of prints I'm doing

@CSparzo 7 месяцев назад

Have you ever considered using vibratory polishing to finish the parts? Youd still have to break off the supports but everything else would be automated.

@adrenalinem4n 2 года назад

are your resin prints just few and far between? NVM see not d2c just b2b

@3DPrintedDebris 2 года назад

Yeah, just B2B, and really just a couple of customers.

@wvwExorcistwvw 8 месяцев назад

Amazing work & dedication, hope your business prospers. I own a single 3D printer but nothing to print. My only question: How does the world come up with all these "Junk " to print ?

@3DPrintedDebris 8 месяцев назад

Everyone starts out with open source models. Just dig through the analytics and see what sells.

@bluedrago505 2 года назад

What are those pliers that you're using for finishing?

@3DPrintedDebris 2 года назад

Here you go! Ergonomic Pliers: amzn.to/3elgEqw

@petrovk427 2 года назад

do you use the urinal near the air compressor?

@3DPrintedDebris 2 года назад

Lol... wut?

@paprott_8s Год назад

Dat urinal at the back… loving it 😂

@3DPrintedDebris Год назад

58th person to bring up the urinal.

@TheVirtualFoundry 2 года назад

This is really cool. It looks like you've managed to tame one hundred wild animals. What software do you use to get the print jobs from your terminal to the printers themselves? We're up to 7 printers in our R&D lab but still 'sneakernet' the files around the shop on sd cards. Could multiple terminals manage the same cloud of printers?

@3DPrintedDebris 2 года назад

Check this out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qPcq53zWjM8.html I've laid all that out flat.

@TheVirtualFoundry 2 года назад

@@3DPrintedDebris That's exactly what I was hoping to learn. Thank you for sharing!

@3DPrintedDebris 2 года назад

@@TheVirtualFoundry You're welcome! Good luck!

@nikzamora9559 2 года назад

What is that liquid you're using during the finishing session?

@3DPrintedDebris 2 года назад

BSI accelerator. It cures the CA instantly, and greatly speeds up the production bench.

@philr6829 2 года назад

Got to love the urinal right there in the print farm. Have to ask - what was there first - the farm or the urinal?

@3DPrintedDebris 2 года назад

The urinal. You can see the move-in in my origin video. It used to have a sign that said "Deposit Coors Here" above it.

@JoeStoffa 2 года назад

Do you have any videos specific to the economics? I know absolute numbers are a sensitive subject, but I’d be curious on a breakdown between materials/printers/shipping/transaction/labor. I’m getting ready to mass print a product. Initial calculations suggest it’ll cost about $50 to produce (material, printer, labor), and I estimate I’ll need to charge around $100 to make it worthwhile after accounting for transaction/shipping costs.

@3DPrintedDebris 2 года назад

If the CTM is $50, you should charge $200 for proper margins and taxes. I'll do a video later on about admin, overhead, margins, and sustainable profit.

@Blackburnerable 2 года назад

@@3DPrintedDebris please do make a video on this, I really want to start up my own business

@jonnyboytech2574 8 месяцев назад

this means good times getting things done!

@bhavinnagda4167 2 года назад

how do you deal with fumes from all the printers ? you also operate from same room as all printers

@3DPrintedDebris 2 года назад

I made a video about that, check it out! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iKInGAKbQI0.html

@pequodexpress 2 года назад

The open-plan urinal is a great time-saving idea.

@3DPrintedDebris 2 года назад

I was a hold-over from the prior owner I just never saw a need to remove.

@pequodexpress 2 года назад

@@3DPrintedDebris I'm still going to do it without the wife's consent.

@mneliason 2 года назад

Just wondering if you have any concerns with all the toxic fumes from 100 printers all day. Do you have good ventilation?

@3DPrintedDebris 2 года назад

Yep. Check this out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iKInGAKbQI0.html

@formysindesigns 2 года назад

What system you use to manage everything?

@3DPrintedDebris 2 года назад

Octofarm and Google Sheets. I'll probably code my own order/workload management SW next year to get off of google.

@L337f33t 8 месяцев назад

Man the logistics are crazy! I wouldn’t be able to keep track of more than maybe a dozen printers.

@3DPrintedDebris 8 месяцев назад

Errors and omissions certainly scale with the number of orders and printers. Organizational skills and automation are key!

@swindmiller 2 года назад

For printers not currently printing, do you shut them down or just leave them up for the next time you use them? If you shut them down do you have something to remotely power up/down via octoprint or just manually? Thanks!

@3DPrintedDebris 2 года назад

I usually shut them down every night, including the pis. I just kill power to both, never corrupted a SD card either.

@swindmiller 2 года назад

@@3DPrintedDebris thanks! I didn’t know if you had a way to kill power to the printers from the pi. Wanted to make sure I was safe…lol

@3DPrintedDebris 2 года назад

@@swindmiller I can through Octofarm, but I find the time it takes for a graceful shutdown isn't worth it. 6 years running, I've never lost a SD card on a pi.