Тёмный

A Quick Plumbing Tip To Avoid Headaches! Don't Fall For This Common Mistake! 

Blue Bulldog Plumbing
Подписаться 13 тыс.
Просмотров 7 тыс.
50% 1

Plumbers do you do this test? Back after the Easter break with a day in the life of a plumber episode and the one job would of caught me out if i didn't do this plumbing tip and test this appliance correctly, its something I've seen misdiagnosed so many time in my plumbing career.
Also we have a simple plumbing jobbing thrown in there, i get asked why i do plumbing when i'm a trained gas engineer, the reason is simple, plumbing repairs can be simple and you can earn good money from doing them!
Lastly we have a not so simple gas run to do after the customer smelt gas in there property. Cadent was called and found the old steel pipework leaking. There was no easy way to get the pipework back in, check out how we get around this one
Thank you all again for your support we are getting closer and closer to 10k!!
Subscription Goal 8910/10,000
#plumbing #howto #plumber
Check the links below if you considering any work wear from Big Boots might save yourself a few quid
BIG BOOTS 10% OFF LINK BELOW OR USE BULLDOG10 AT CHECKOUT
www.bigboots.c...

Опубликовано:

 

23 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 74   
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
So…what’s your worst callback that could of been avoided? Let me know below 👇 We are closing in on 10k…if you haven’t already help me out and hit that button…much appreciated 🙌👍
@SeanRidley-g7z
@SeanRidley-g7z 5 месяцев назад
Just subbed to help you out. I hate all the emails and phone alerts! Great videos. I like your honesty showing all the problems you get. Same as I do. Plumbing and heating is so unpredictable..
@Lutonman2010
@Lutonman2010 5 месяцев назад
The blackening on the wall behind that boiler on the left peaked my interest straight away.
@craigmcgregor5463
@craigmcgregor5463 5 месяцев назад
Great videos and great delivery on what your doing. Didn't know that's where you use to work. I'm here just now living it up on lunch break haha. Enjoy the content and keep it up mate 🎉
@cputilitysolutions
@cputilitysolutions 5 месяцев назад
Nice few jobs there Luke 🙌🏾
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Thanks mate 🙌👍
@JimmMacc
@JimmMacc 5 месяцев назад
Nothing wrong with replacing an expansion vessel. Nice big red tangible part, cheap on eBay, easy to install and no nasty surprises
@bang234
@bang234 5 месяцев назад
Some serious aim with that LDF!
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Good shot sir 😂👍
@Horsecockbadger
@Horsecockbadger 5 месяцев назад
Your a good young plumber i like watching your stuff
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Thanks mate appreciate the support 🙌
@markhoward5780
@markhoward5780 5 месяцев назад
Thanx for taking time and effort to make these videos
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
No problem 👍
@bobbymckean915
@bobbymckean915 5 месяцев назад
Hi Luke, If you put a smear of silicone gease on the schrader valve before you re inflate the vessel.You will hardly ever have to change a new core again mate👍👍
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Thanks mate 👍
@jacquelinestanyer8533
@jacquelinestanyer8533 3 месяца назад
🔵🔵🔵🔵🔵 great video above and beyond 🔵🔵🔵🔵
@SteveN-pw4dj
@SteveN-pw4dj 5 месяцев назад
Yep my next door neighbor had this issue, i checked it for them and pointed out the issue with the schrader valve... They called vaillant who sent an engineer and he changed the whole expansion vessel under warranty.
@Fraserkins
@Fraserkins 5 месяцев назад
i very rarely change the prv, i just clean them up ,clean the brass seating silicone grease and put them back. also when i do change them i just change the internals unless its really bad.
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
I used to but not worth the callback if it doesn’t sit correctly once cleaned
@cadle11
@cadle11 5 месяцев назад
The 27 years never checked the bleed value on expansion. I usually fill to 1 bar then replaced..
@Fraserkins
@Fraserkins 5 месяцев назад
put a ton of silicone sealant round the syphon backnut ,then if you ever go back to change the dump valve you can unscrew it from inside the cistern.
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
I can see why people do it but I don’t use silicone on toilets never have 👍
@SeanRidley-g7z
@SeanRidley-g7z 5 месяцев назад
Soldering with a heat mat behind never looks as good. You done well I recon.
@pauljohnston-s3x
@pauljohnston-s3x 5 месяцев назад
Just ordered up shader valve kit cheers for great video as always 👍
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Thanks mate 🙌👍
@paulbell7654
@paulbell7654 5 месяцев назад
Well done checking and changing the expansion vessel valve, about 50% of the ones I pump each day need to be replaced. Unfortunately, spraying it with LDF like that and sealing it in with the dust cap will result in a rusty mess when its next opened! Tip of the day is to just spray the LDF on your finger, then just smear it over the end of the valve to stop it getting inside - i always use my electric pump to blow out the valve (using the pump like an air duster afterwards to clear any LDF or smeg out before replacing dust cap)
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Nice tip Paul thanks 👍
@audibell
@audibell 5 месяцев назад
Good job
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Thanks mate 🙌👍
@paulsmith2931
@paulsmith2931 5 месяцев назад
A bit of an eyesore that kitchen pipe, but sometimes a man’s gotta do what a man’s gotta do, and it gets their cooker up and running. On that toilet I always just chuck those crappy straight through plastics bolts and fit the metal ones with the bolts that tighten on the cistern first, had a few of those plastic ones leak on me, think they work loose with movement.
@peterzmuda
@peterzmuda 5 месяцев назад
If you put a little silicone grease in the valve before you pump it up they usually don’t leak
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Have to give it a try on next one 👍
@martinthornley1610
@martinthornley1610 5 месяцев назад
We all need the tips, we learn everyday
@martinthornley1610
@martinthornley1610 5 месяцев назад
Learned loads from you and heat king
@martinthornley1610
@martinthornley1610 5 месяцев назад
I used change full prvs b4 learning to unscrew them and clean up! Same with pumps on a combi! B4 I knew how to just replace the head 20 years ago!!
@MegaShan001
@MegaShan001 5 месяцев назад
Nice one Luke 👍🏻
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Thanks mate 👍👍
@craigmcgregor5463
@craigmcgregor5463 5 месяцев назад
Them steps look familiar 🤔 😂😂
@bluebulldog_uk
@bluebulldog_uk 4 месяца назад
Bostin them steps am…got big pair as well 😂
@craigmcgregor5463
@craigmcgregor5463 4 месяца назад
@@bluebulldog_uk Do you mind reaching put Personally. Got a few questions. Regarding after BG? Thanks 😊
@pauls826
@pauls826 5 месяцев назад
Commercial lads kicking off saying don’t touch it it’s all commercial 😂 might of got that gas pipe right against the wood door frame at bottom
@jasonsimpson-ks8un
@jasonsimpson-ks8un 5 месяцев назад
Great video do you have a link to that pump looks ideal for ex
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Here you go mate UPBOOST Eco | Smart Portable Tyre... www.amazon.co.uk/dp/B0BRGSNDVY?ref=ppx_pop_mob_ap_share
@olympusplumbingheating5027
@olympusplumbingheating5027 5 месяцев назад
Don’t forget to stick me in the giveaway mate 👊👍
@MrVictorvolvo
@MrVictorvolvo 5 месяцев назад
That mini pump looks brilliant! Is it an Amazon job?
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Yes mate here is the link UPBOOST Eco | Smart Portable Tyre... www.amazon.co.uk/dp/B0BRGSNDVY?ref=ppx_pop_mob_ap_share
@deathstr0kexorn765
@deathstr0kexorn765 5 месяцев назад
Love the idea of the up boost! You used it on unvented vessels yet? 3bars a pain with a footpump! Am considering getting the bigger one that’s £29.99
@bluebulldog_uk
@bluebulldog_uk 4 месяца назад
Not yet but will save my legs when I have to 👍
@deathstr0kexorn765
@deathstr0kexorn765 4 месяца назад
@@bluebulldog_uk brought the smaller one in end, used it on 4 vessels and barely dropped 1 bar on the battery
@Fraserkins
@Fraserkins 5 месяцев назад
remember the early ravenheats where it was impossible to reinflate the pressure vessel.
@martinthornley1610
@martinthornley1610 5 месяцев назад
Old cdis are a pain to inflate to! But yea them ravenlunitic boilers was bad!
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Yes I do! Ferroli as well can’t remember the model but the test point was at bottom, always failed 👍
@bobbymckean915
@bobbymckean915 5 месяцев назад
modena or domina always had the vessel test point on the bottom🤦‍♂️​@@bluebulldog_uk
@noeldunford4955
@noeldunford4955 5 месяцев назад
One honest plumber
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
🙌👍
@martinthornley1610
@martinthornley1610 5 месяцев назад
Your tight you lol, I would of give 2 quotes for the re run then if they accepted the run they have for budget reasons then ad just do the neatest route lol good work love your channel
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Thanks for support mate 🙌👍👍 I really wanted to do neater route but customer happy to have cooler back on, no more takeaways 😂
@Heatking
@Heatking 5 месяцев назад
Good episode this. Really enjoyed it… until I seen the working in the mess 😂😂😂😂♥️♥️
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Trying to keep my word…I’m learning to tidy up mate 😂 it does make a massive different working without the clutter! 🙌👊
@charliewillis8527
@charliewillis8527 5 месяцев назад
Don't worry Dan he trips up on his own shoes laces and that spider went to see luke to see how he does push fit
@charliewillis8527
@charliewillis8527 5 месяцев назад
@@bluebulldog_uk Luke were did you get the battery pump you had the other day and is it any good
@paulkipling3112
@paulkipling3112 5 месяцев назад
Do you have a link for that pump mate?
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Here you go mate UPBOOST Eco | Smart Portable Tyre... www.amazon.co.uk/dp/B0BRGSNDVY?ref=ppx_pop_mob_ap_share
@richardhodgson7443
@richardhodgson7443 5 месяцев назад
Hi mate, where did you get your Schader kit from please
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Amazon mate 👍
@Howto-hj4sq
@Howto-hj4sq 5 месяцев назад
Stick a magnet onto the back of the pump….
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Great shout that is 🙌👍
@Howto-hj4sq
@Howto-hj4sq 5 месяцев назад
Let’s see it in the next vid bud or whenever your pumping up a vessel again
@charliewillis8527
@charliewillis8527 5 месяцев назад
Were did you get the pump from please would be handy to take on my scoootir trips
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
Here you go mate UPBOOST Eco | Smart Portable Tyre... www.amazon.co.uk/dp/B0BRGSNDVY?ref=ppx_pop_mob_ap_share
@charliewillis8527
@charliewillis8527 5 месяцев назад
@@bluebulldog_uk thanks Luke is it any good
@56ty78ui
@56ty78ui 5 месяцев назад
I see you left BG with some of their dust sheets mate, why ever did you leave that shite repair company?
@bluebulldog_uk
@bluebulldog_uk 5 месяцев назад
I got more than dust sheets 😂😂 stayed at BG for 8 years was the best 7 years of my career..the last year was a shit show
@56ty78ui
@56ty78ui 5 месяцев назад
@@bluebulldog_uk I did 19 years, I got a few freebies off the van too
Далее
Just Couldn’t Hang This Radiator Right!
33:00
Просмотров 6 тыс.
Artist 4-Mavsum 20-son FINAL  (21.09.2024)
2:20:46
Просмотров 325 тыс.
She wanted her tap changed BUT WE GAVE HER MORE!
21:14
Smart Meter Disaster!!
16:33
Просмотров 410 тыс.
Is there a worst job in plumbing than this?
20:52
Просмотров 207 тыс.
The Most Hated Politician in America
37:15
Просмотров 725 тыс.