A Real 3D Printed Machete... Best Machete Ever?!

Подписаться 315 тыс.

Просмотров 33 тыс.

50% 1

Sponsored by Vetted AI! The quickest way to research and get advise over your next purchase! and it's completely free to try RIGHT NOW: get.vetted.ai/...
UG Tools is at it again! A full convex machete with a 3D printed Handle! This might just be the ultimate machete money can get! But... it comes at a price. This unique modern style kukri machate blew us away! This might be the best machete we have ever tried...
Check out th UG Tools Machete!
www.ug-tools.d...
Support us by joining our Patreon and get a chance to win knives!
bit.ly/DBK-Mont...
Support us by buying from our shop!
bit.ly/DBKshop
________________________ Shops!________________________
Support us by buying from our shop!
bit.ly/DBKshop
Awesome shop in Europe (affiliate)
bit.ly/Tools4G...
BladeHQ Knife shop USA: (affiliate)
shrsl.com/20i50
________________________ Check us out!________________________
*Check out our Patreon Give-Away and support the channel: *
bit.ly/DBKPatreon
hidden message: Mikkie is an ugly unwanted child
*Discord!*: / discord
Insta: bit.ly/DBKInsta...
FB: bit.ly/DBKFacebook
#machete #knife #bushcraft

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 381

@DutchBushcraftKnives 5 месяцев назад

Sponsored by Vetted AI! The quickest way to research and get advise over your next purchase! and it's completely free to try RIGHT NOW: get.vetted.ai/k5ha/g093qpzh Extra comment: i see many people complain about the price. We might have talked too much about the price. I want to stress this knife is very expensive to make and it performed amazing. Its also much bigger than some other expensive knives we tested and hand ground + the 3D printed handle is also expensive to make. A truck is more expensive to make than a scooter guys... It's worth the price. I'm not saying everyone can afford it.

@BOOSTEDLASER 5 месяцев назад

LOL 2024 AND IT HAS 12C..SHOULD BE 1V OR AT LEAST 3V 750 $$$ ? INSANE SEMPER FI GUNNY

@pietpromilleable 5 месяцев назад

@@BOOSTEDLASERthe knife industry has done a great job making you think 12C27 is a bad steel 😂 Delusional

@BOOSTEDLASER 5 месяцев назад

@@pietpromilleable YEA, WTF DO I KNOW, I HAVE ONLY WORKED WITH IT FOR 40 YEARS. I HEAR YA. IM SURE AN ARMCHAIR COACH LIKE YOURSELF WOULD KNOW MUCH MORE THAN ME...OR BARK RIVER. TY FOR OPENING MY EYES. MEAN IT ! I CAN TELL YOU'RE ONE OF THE "BUDGET" GUYS WHO STILL THINKS 1095 IS GOOD AND USEFULL IN MODERN TIMES. I BET YOU THINK THE GAS ENGINE IS DUMB AND GO GO GO STEAM POWER. KID, LET THE BIG BOYS TALK. NOBODY WANTS TO HEAR YOU SPOUT OFF ABOUT THINGS YOU DONT KNOW. NO RETORT NEEDED (LOOK THAT WORD UP) FREE INFO : 12C WAS DECENT IN THE 80s,NOT SO BAD IN THE 90s. LEARN WHAT 1V IS AND WHY BARK RIVER MADE THE BRAVO MACHETE OUT OF IT. OTHER "BUDGET" OLD GUYS HAVE DONE A GREAT JOB OF TELLING YOU THAT STEELS FROM 20-250 YEARS AGO ARE "JUST FINE" GONNA HOP IN MY MODERN TESLA AND DESTROY EVERY V8 GAS CAR U HAVE HAD A DREAM ABOUT. AS U LIKE OLD TIME METALS...TRY USING COPPER OR ANIMAL BONES AS TOOLS. YOU DOLT AND DULLARD. ( LOOK THOSE WORDS UP) I CAN SEE WHY YOU ARE NOT MARRIED PRO TIP: NOBODY WANTS TO READ YOUR USELESS POSTS, POST LESS FACT

@BOOSTEDLASER 5 месяцев назад

@@pietpromilleable BTW KID, I NEVER SAID "BAD" I SAID IN MODERN TIMES 12C FOR 750 $ !!!!!!!!! IS INSANE. LEARN 2 READ.THIS IS A 150 -200$ KNIFE AT MAX. NO RETORT NEEDED

@Ural1706 5 месяцев назад

@@BOOSTEDLASERthats why you NEVER heard of 3D Printed Titanium handle in modern times… the handle is special here and the weight

@apollosun6268 5 месяцев назад

Pretty much stopped the video at the €715 mark.

@ddrod8128 5 месяцев назад

Thanks for letting me know 😂 Stopping now lol

@couchcamperTM 5 месяцев назад

I stopped at Otto.

@czed7515 5 месяцев назад

I stopped the video at 0:02 as soon as i seen your comment 😂

@kevinj2334 5 месяцев назад

With the same steel as a mora companion 😅

@madmax82988 5 месяцев назад

I'm glad I waited before commenting cuz I thought you meant that in time and I was very confused lol

@mickjacobs8295 5 месяцев назад

It would absolutely be worth the price if it was 3V

@SeacryBlastsAloT 5 месяцев назад

3V in a jungle? No, thank you. It is a budget steel, yes, but it was properly heat-treated so it outperforms probably every 3V Bark River Knife

@StephenMcGregor1986 5 месяцев назад

@@SeacryBlastsAloTMagnacut for this price buddy

@Laurarium 4 месяца назад

Wear resistance is pretty useless and more of a drag in maintenance on a machete. 12C27 is just as tough as CPM-3V 12C27 is much more corrosion resisitant than CPM-3V

@Laurarium 4 месяца назад

@@SeacryBlastsAloTTrue, cheap steels do not mean bad steel, they are just cheaper due to less alloying element etc. The issue is, since the cost is kept down by using an excellent steel which has an excellent price, the price of the knife should be cheaper. Otherwise, I just think that one advantage of 12C27 is wasted😂

@SeacryBlastsAloT 4 месяца назад

@@Laurarium well, I do not disagree with your general thought. However, I don't think that you can have that machete for much cheaper. Who is offering you sth similar for less?

@Phaminator525 5 месяцев назад

Let’s go DBK !!!

@arctticwaffles354 5 месяцев назад

Will you guys bring back the survival challenge like what to buy at different price point or give us clues of the dbk budget knife plz 😉

@Jussydergraf 5 месяцев назад

UG Tools is an impressive Brand. Not cheap, but maybe the best blades on this planet

@WilliamLaroche1.618 5 месяцев назад

Nah Fallkniven.

@Warek200 5 месяцев назад

@@WilliamLaroche1.618 jea "Fallkniven" pretty much describes their brandevolution

@Jussydergraf 5 месяцев назад

@@WilliamLaroche1.618 got the Full Fallkniven Pro Series. Very good knives, but not the best

@andrepochini1805 5 месяцев назад

You should try a knife from Zakharov.

@davidallen5976 5 месяцев назад

Butter is perfectly fine for your heart.

@DinoNucci 5 месяцев назад

Correct

@jamesbarisitz4794 5 месяцев назад

Even in Magnacut it would be $300 too much.

@gordonmacdowell8117 5 месяцев назад

I'm not sure if I'll ever be involved in the luxury machete market.

@Johan_the_Marshal 24 дня назад

Give it time… the dust printers are getting there

@martsec9330 5 месяцев назад

Why would I buy that knife when I can buy a 3D Printer, laptop and rent for a month for 700

@rko2016 5 месяцев назад

Haha its been a while since you prodded survival lily

@Hypnoticshrimp1989 5 месяцев назад

Martin... that hair is almost as bad as the price of the knife... shave it my dude! It would look light-years better 😜 love you guys! Keep up the best knife videos on RU-vid!

@imgadgetmanjim 5 месяцев назад

Cheaper than a Rockstead.

@deonpetrus 5 месяцев назад

the handle looks too small. Other than that , the knife is beast.

@pietpromilleable 5 месяцев назад

They have 2 sizes

@frostys_bushcraft 5 месяцев назад

Handle is actually quite big and "meaty" so really comfy to hold and work with.

@johnproctor6438 5 месяцев назад

It’s a machete. There’s no way a rational person is ever going to spend more than about $150 on a damned machete. There’s literally zero reason to do that. At that price point, it better be cleaning my house for me while I’m at work.

@mishnok11 5 месяцев назад

👏👍👍👍

@jnzupka 5 месяцев назад

So does the B in Mikkie B stand for “Bitch and Moan”? X3

@Aaron-pf7eh 5 месяцев назад

Be a cold day in hell the day I pay 700 euro for a machete

@StephenMcGregor1986 5 месяцев назад

Yeah, wtaf is that price. No magnacut, beryllium, or diamonds.

@vllad74 5 месяцев назад

. I am just fine with my Mini Duku Parang Machete... which is basically 6 times cheaper..

@Darrenski 5 месяцев назад

This does pretty much what all machetes are meant to do - chop a path through a bit of jungle. You could get a basic british army machete that works just as well and looks as shit for 50 quid max @vllad74

@vllad74 5 месяцев назад

@@Darrenski spot on

@Phaminator525 5 месяцев назад

@@Darrenski facts, a decent machete will only be a tiny bit worse than an expensive one.

@greenman5255 5 месяцев назад

(3:45) "Why would I buy the knife when I can buy my own 3-D Printer for $700?"...Hahahahahaha!

@xPumaFangx 5 месяцев назад

Not only that you can then make money with your 3-D printer. Then buy the knife latter on.

@Alex-ze8pz 5 месяцев назад

Titan Printer 700€? 😅

@lethPointer 5 месяцев назад

@@Alex-ze8pz 200k upwards

@stefthorman8548 5 месяцев назад

@@lethPointerI bet 200k is for industrial scale printers, an hobby printer should be way cheaper

@lethPointer 5 месяцев назад

@@stefthorman8548 titan printing is not for hobby

@bladeandsimple3601 5 месяцев назад

no one is paying 800 euros for a machete that I can guarantee my 30$ machete will outwork! machetes are supposed to lightweight. not worth it. for basic scanvik steel!

@maxlvledc 5 месяцев назад

I'm sorry that price for a budget steel is ludicrous...no doubt it performs well...but at least 3V for that price.

@StephenMcGregor1986 5 месяцев назад

yeah, complete rip off

@vilhamdutch2962 5 месяцев назад

@@StephenMcGregor1986yea they are smoking crack

@xencorex1713 5 месяцев назад

what do u think, how expensive is the 3d printer? Btw such a steel would be shit at a machete;)

@maxlvledc 5 месяцев назад

@xencorex1713 the 3d printer only represents the handle, which I'm not convinced is worth it for this type of knife.. 12c27 is strictly worse than 14c28n. But performance wise is far far behind 3V as a steel for this purpose. I can get a fully custom made in USA machete for around $400 in CPM 3v with practically any handle material (I'd probably pick terratough)

@xencorex1713 5 месяцев назад

@@maxlvledc no u couldnt get a custom made machete with such a handle for this price. Btw the steel is perfect for this blade, cpm 3v would be shit for this tasks. Its made for the jungle, with saltwater. Cm3v would be shit

@frostys_bushcraft 5 месяцев назад

I have few of their knives with this machette on the way and they're basically only knives I use anymore. Designs are great, ergos awesome, materials top notch and cool factor is off the charts. Yeah they're pricey but there's a LOT of knives in their price range that offer nothing new or innovative - just a slab of steel, some G10 on the sides and call it a day. And a shitty sheath... talking about you BM.

@frostys_bushcraft 5 месяцев назад

@BorealEDC mate, you really don't know what you're talking about. None of their handles are polymer, they're 100% titanium, laser welded. They use Magnacut on most of their blades but it would be a dumb choice for a machette. 12C27 is one of the toughest stainless steels there are, just check Larrin Thomas (guy who invented Magnacut) testing on it. Don't be a tool.

@mishnok11 5 месяцев назад

@@frostys_bushcraft🤦🤡

@mishnok11 5 месяцев назад

@BorealEDC👍👏

@Nebolo 5 месяцев назад

Woopwoop. It's the sound of DBK 🙌🏽

@tommysoderholm8305 5 месяцев назад

Didnt mickie get a 1000 dollar bowie from fällkniven? Seems like hes paid more for less before.

@turtledunkknucklebaby8089 5 месяцев назад

Yeah. But one of the best steels ever created vs bottom of the barrel sh*t steel. But yeah. Still outrageous.

@Phaminator525 5 месяцев назад

@@turtledunkknucklebaby8089Fr $700 for 12c27n is crazy lmao

@Phaminator525 5 месяцев назад

@@turtledunkknucklebaby8089true $700 is crazy for 12c27 lol. That’s literally the same steel as a $10 mora

@paulkopacz5051 5 месяцев назад

My Kukri cost like $25, just sayin'.

@BenCase88 5 месяцев назад

You can buy a real hand forged, Nepalese Gurkha Kukri for $150 with buffalo horn handle or the Condor kind for $ 100. I think they will chop just as well.

@pietpromilleable 5 месяцев назад

You can buy a Fiat 500 or a Porsche 911. They both drive but one will perform better while the other is cheap. You really only understand those UG-Tools products when you have them in hand. I have some knives of them and got to „play“ with that machete at a fair. It is absolutely insane and the products you mentioned don’t come close

@mishnok11 5 месяцев назад

@@pietpromilleable😂😂😂🤦🤡

@adriaandoelman2577 5 месяцев назад

maybe, but they would both cost me a limb anyways.

@mariaconcepcionrodriguezhe2850 5 месяцев назад

@@pietpromilleableyou are really a clown. The chops shown in video are not even close to impressive

@pageophile 5 месяцев назад

Or you could just get a proper forged kukri, save a ton of $$$ and call it a day 👍

@martius8267 5 месяцев назад

Shit steel big prise😂😂😂😂 marketing.Tops sthorm Vector king

@jangierseugtools1845 5 месяцев назад

Shit steel? The decision 12C27 is just perfect for a chopping knife. Super high toughness, awesome microstructure, some carbides but not too many, enough corrosion resistance, good edge retention in wood. What else could you want? All high alloyed steels are a bad idea. Why are axe makers still using C60-C80? Good old 1.4034 would be an awesome decision as well for a machete.

@martius8267 5 месяцев назад

@@jangierseugtools1845I agree with you 100% but for this price it's still shitty stalmax 50ero is good

@jangierseugtools1845 5 месяцев назад

@@martius8267 I would take 12C27 every day over steels like N695 and expensive PM steels.

@Ajaxykins 5 месяцев назад

3d printed is cool and all... but you could just pay someone to grind a kukri better and save $500+ easy. It would do everything the same or better UG Tools- cool innovative ideas but with no common sense

@cryptidtacticalauxiliary 5 месяцев назад

I’ll GO BBUY 5 OTHER KNIVES INSTEAD…

@WilliamLaroche1.618 5 месяцев назад

The Fallkniven modern bowie they have is $1000, so that machete isn't so bad lol

@HankSielski 5 месяцев назад

I have a $10 USD Mora Clipper in front of me made with 12C27 steel…

@Warek200 5 месяцев назад

gotta love those experts saying 3d printing is to weak , titan is too weak , i want 3v , its so expensive .... 80% of these comments could be prevented with knowledge

@pietpromilleable 5 месяцев назад

It’s painful how good of a job the knife industry did convincing people that absolutely fine steels like 12C27 are not enough 🫠

@mishnok11 5 месяцев назад

@@pietpromilleable🤡🤦

@Warek200 5 месяцев назад

@@pietpromilleable so true

@Warek200 5 месяцев назад

@@just9911 it isnt ridiculous , most 3v that you are gettin is so falsly heattreated that its still worse than a good heattreated 12c27 or 14c28 , the problem is people who buy such knifes never ll get anywhere near that point of harduse where you need 3v and so they ll never know that the steel is near useless , i learnd it the hard way on barkrivers and new coldsteel just to name it, there is a reason for the price , the convex alone on such a long blade with thinner egde near the guard , who the fuck does that know a days?

@SeacryBlastsAloT 5 месяцев назад

A lot of people are complaining about the price. I mean, yea, it is crazy expensive, but ... just don't buy it.

@Asitri 5 месяцев назад

No extra Work for a handle all handles are the same. Prefinished blade. Production maybe 80 bucks. 720 bucks profit. We’re do I have to sign for this profit ?

@jangierseugtools1845 5 месяцев назад

Please inform yorself before you type. Take a look at some videos about our knives and you might understand our inovative product.

@mishnok11 5 месяцев назад

@@jangierseugtools1845🤡🤡🤡

@Thechanneloffside 5 месяцев назад

I love ug tools but the Bravo machete in 1v is superior because of the price and steel. The advantage of the ug Machete with a lighter weight (because of the handle) is only for smaller knives relevant.

@martinerhard8447 5 месяцев назад

I see the benefit more in cold weather. That partly holloe titanium handle has super low heat capacity and cant conduct it well You can in winter even through gloves get very cold hands quickly if you touch a regular bigger fulltang

@tubulzr 5 месяцев назад

Convex falcata-design bush/junglecraft machete, with 3D handle, that sure is a niche blade. Unless you want to pass on to your grandchild, a convex falcata design bush/junglecraft machete, with 3D handle, I wouldn't buy it though.

@johnwoodcock6468 5 месяцев назад

Its all about the convex edge. The greatest cutter ever

@beepster991 5 месяцев назад

Thumbnail says "REAL 3D printed knife".... Only 5 seconds in... "the blade is not actually 3D printed, it's the handle..", not a great start. Mostly when can find machete under $30 that will last for life with minimal care.

@mishnok11 5 месяцев назад

👍👍👍

@goncalovazpinto6261 5 месяцев назад

So what happens if you damage the lanyard of your 700+€ knife?

@prometheus_beard 5 месяцев назад

Acccctuallllllyyyyyy haha, there is evidence that metals CAN be printed molecule by molecule and even some prettttty exotic materials can be created. Imagine, if you will, a self-healing, self-sharpening blade. I submit to you that they do in fact exist already, just not publicly, but the tech is there publicly.

@MrJackfriday 5 месяцев назад

As a small time 3d print business owner and a knife enthusiast ,i agree. Would love to see it demoed someday. That would be a total game changer

@prometheus_beard 5 месяцев назад

@@MrJackfriday Aircraft control surfaces and wing changes in flight, same for subs, missiles, aircraft, spacecraft, vehicle self repair and survivability, armour both personal and vehicles, lenses that change shape on demand, lasers then become much more adaptable, surgical tools that change shape for different tasks, so many uses for intelligent materials, it's amazing but pretty scary too though.

@emeraldplatypus9870 5 месяцев назад

Unfortunately, most of these things are done by heating, electric currents or are repaired with resin, so we might be a little way off this. It does sound awesome tho!

@demo2952 5 месяцев назад

No knife is worth $300+

@stefthorman8548 5 месяцев назад

Yes i agree, no 6inch and under knife should be over $300, but this here is basically an small sword, and this isn't an machete, since it's hard edge instead of soft. And I agree that this knife should also be around $250 with some cheaper g10 handles

@demo2952 5 месяцев назад

@@stefthorman8548 i have Himalayan imports full sized khukri blades that were around $200

@leonidasnorway9821 5 месяцев назад

715 for 12C27? No thank you btw nice video boys keep up the great work 👍

@horstelvis83 5 месяцев назад

I did not expect such a good summary! Lol! Hell of a machete it seems. ;-)

@Westlandsurvivalbuscraftknives 5 месяцев назад

Dammt dbk you guys keep getting me in money problems anyways great video

@Westlandsurvivalbuscraftknives 5 месяцев назад

Also that dish of your mother I remember eating that ones at my grandma's house she learned that from her mother

@user-po7iv4ni3o 5 месяцев назад

To get the most radical convex grind possible, I like to make my knives out of round stock. They don't cut very well, but they're sure as hell more convex than your knives 😆

@nickventruella2493 5 месяцев назад

Stop using AI boys

@vandelftcrafts2958 5 месяцев назад

Most Machetes have soft steel, are hard to break and easy to sharpen. This has a hard steel to keep the convex sharp longer, it is more comparable to a high quality bushcrafter that outgrew its sheath. Curious how hard the spine is, should be less hard somewhere to take vibrations and abuse. Well thought out blade geometry and it is ground for purpose with varying grinds along the edge. Not even that a bad prize for this blade, a lot more work in a knife double the size of a regular bushcrafter. Loved the Video!

@cryptidtacticalauxiliary 5 месяцев назад

$299.00 would be high..l.

@Hypnoticshrimp1989 5 месяцев назад

$700.....? For?? The handle? 🤣

@SunShine-vr4km 5 месяцев назад

Send me a knife here in Perú! hahaha Greetings DBK!

@leluhantjoel8313 4 дня назад

Did you try the Condor Amalgam ? A Joe Flowers design, kukri style. Very much the same vibe and convex as well.

@PredatorX8033 5 месяцев назад

Made in Germany 💪🏻

@richardpaul1114 5 месяцев назад

I hope you guys don’t get too commercial

@JosephOlson-ui2pg 5 месяцев назад

They can be as commercial as they want. We all will be who we are, they won't ruin our enjoyment of knives or outdoors. It's not a competition who spends the most, it's not a competition who doesn't the least. Fuck money! Fuck caring about money all the damn time! I don't want to be controlled by that or anything else!

@richardpaul1114 5 месяцев назад

@@JosephOlson-ui2pg lighten up frances

@mishnok11 5 месяцев назад

@JosephOlson-ui2pg 🤡🤦

@StevanOutdoor 5 месяцев назад

They already did long time ago.

@shockwavecity 5 месяцев назад

You can totally print hardenable materials now, you're just getting zero advantage from it on what is effectively a bar of steel with no need for complex internal geometries. Shit, they've been 3d printing stellite and even inconel for years now.

@Mastermindyoung14 5 месяцев назад

Years ago I worked for Markforged and we printed with D2. I have a blank of it that I've been meaning to make a knife out of.

@DutchBushcraftKnives 5 месяцев назад

thats awesome!

@usernick8928 5 месяцев назад

I was gonna say... You can absolutely 3d print steel, I don't know how strong it is though

@Mastermindyoung14 5 месяцев назад

@@usernick8928 The only risk I could see is if you printed the blade vertically, the layers might delaminate with impacts. I printed mine flat, so as long as it's heat treated correctly it should be surprisingly strong

@cameronhutchinson3192 5 месяцев назад

Love your work, can I suggest you use I lanyard the way it's intended not around the wrist, over your knuckles. Hard to explain but way more support you can nearly let go of the knife and it will stay in position. Not like if it slipped out the way you have it, it will be out of control. Brief description put lanyard over top of handle and slip fingers through lanyard at bottom. Just a suggestion. 🤙

@CristoffelBonorand 5 месяцев назад

Because the 3D printer to print Titanium costs 250‘000€, and not 700€ 😉

@matthewkuhl79 5 месяцев назад

titanium isn't a good choice for knives

@Shiwwy 5 месяцев назад

@@matthewkuhl79only the handle

@pietpromilleable 5 месяцев назад

@@matthewkuhl79 it is unparalleled for handles. It’s pointless for blades. That’s why the handle is titanium and the blade is steel…

@CristoffelBonorand 5 месяцев назад

@@matthewkuhl79 thats why the blade is still made of steel…

@azimcz 5 месяцев назад

It's not knife, it's machete guys!!

@Gterr1971 5 месяцев назад

Can it get the last bit of peanut butter out of the bottom of a jar? Prob not . But will carve a flat stick quick enough.convex , awesome. Rare these days. 799 USA dollars !? Im out the game yo.

@pietpromilleable 5 месяцев назад

UG-Tools really makes no-compromise tools🤯 Already have knives of them and haven’t used anything else since 😍

@merpius 5 месяцев назад

Price is the compromise. There is always a compromise, the question is always where are you willing to compromise.

@Warek200 5 месяцев назад

@@merpius you get what you pay like always... the customer support is peak too

@StephenMcGregor1986 5 месяцев назад

The compromise is the metal. No tip test, no torture test, no shooting test. This seems like a biased sponsored video to support rubbish for some reason. Shit on Kabar then love this. What a bizarre channel.

@Warek200 5 месяцев назад

@@StephenMcGregor1986 i ve 3 knifes from them and i dont treat them softly , never had a problem, they did a torture vid of their knifes themself

@aaronallen7777 5 месяцев назад

Let’s go, boys

@kevinAuman1 5 месяцев назад

Notification gang!

@bldy_FrmdaiX 5 месяцев назад

4:14 😂 Omg ribeye steaks😋 with beautiful machete

@dabossmanyt4844 5 месяцев назад

@DutchBushcraftKnives do you still recommend the Joker nomad or has it been surpassed for the price range? (I see it didn’t @ properly lol)

@hellhound2260 5 месяцев назад

3d printed handles and 12c27 for 715 euros? lol they must be making 700 euros from each one.

@eyeofthetiger4184 5 месяцев назад

G'day Guys, 700 odd Euro ay .............. does it come with a coupla bottles of Grange, a box of cigars and a blow up doll ? Cheers Duke.

@f804.de.ruyter 5 месяцев назад

Looks like an scimitar or kopis maybe leonidas sword though thats more rounded and not as peonouced.

@StephenMcGregor1986 5 месяцев назад

No shooting it, tip test, rope cutting, fine detail peg making, pan chopping, steel drum hacking, bone chopping, edge retention testing, sharpening testing???? Most disappointing and lack luster review I have ever seen from you guys.

@achimgeist5185 5 месяцев назад

The UG Tools 3DTi machete generally comes without a sheath. I would like to see a side by side comparison of several choppers. The best choppers I own: 1. Bark River Ja-Nap, 2. TOPS El Chete / Cold Steel Gurkha Kukri Plus 3V, 3. Bark River Bravo III, 4. Fällkniven Moderne Bowie / Fällkniven Thor / Cold Steel Trail Master 3V / Bark River Grizzly. I think at least the Bark River Ja-Nap can easily compete with the 3DTi machete!

@oldcol8923 3 месяца назад

Guys, you might want to checkout the English police truncheon lanyard style (through thumb, over the back of hand)

@Darrenski 5 месяцев назад

€700... Pass. I'd does what all machetes are meant to do. The end. I'd sooner get a TRC and a pair of haix scouts and probably still something else cool as well.

@piotriwaszko2295 5 месяцев назад

It seems to me that this machete is not better than Bark River 3, but it is definitely 7 times more expensive than Terava Skrama and 100 times uglier than the ugliest Extrema Ratio 😆!!!!

@alpine1600s 5 месяцев назад

It's only $800 US. I just had to shell out $1,300 to the FED out of my pocket, that's including to what they already deducted from my paycheck. So what's $800? 🤦‍♂️

@OCompton 5 месяцев назад

That Darth Vader cut away - hilarious! Great video

@dingogreens7472 5 месяцев назад

sorry dudes, you can 3d print a steel blade. another german do this, that guy from midgards knives has 3d printed blades , the steel is something in the range of n690

@boubouboubou7875 5 месяцев назад

Vetted😂😂😂if you are not an industrial knife maker you will not be in there liste,it's like asking deezer who is the best singer and you will have a liste of artistes that sell millions of song but not specialy the best.

@Joshuaskehan-mk8cj 5 месяцев назад

Listen I'm not a steel snob, I love budget steels and cheaper steels but for 700 quid I'd want something a lot better than 12c27, good steel don't get me wrong but 700 quid? Where are they getting this price! To put it into perspective, I got a cold steel kukri plus machete today for 40 euro, I could buy 17.5 of those for one of these and one of them would probably last me a lifetime. I love khukuris and own 5. Traditional, modern, modified, thick, slim you name it I'll love it. This is an unreal design but that pricetag is just unjustifiable. You could buy two work tuff gear blades for this price at the end of the day.

@jangierseugtools1845 5 месяцев назад

What steel would you want? I would take 12C27 on a 5000€ machete as it´s a perfect steel for the requirements. For sure it´s expensive but they left out some good reasons for the price. They tested way more expensive knives with less function and nobody ever complanined the price.

@Joshuaskehan-mk8cj 5 месяцев назад

@@jangierseugtools1845 I agree it's a good steel, I have many khukuris from Nepal with what would be considered cheap steel by steel snobs but it's perfect for the job. Takes an edge quickly, rolls doesn't chip etc. @700 euros I'd definitely want 3V minimum, cpm D2, Cruwear, k390 (or other k3xx) etc. My main point is where are they getting 700 quid from. I understand it's custom/semi custom and a good design but there are knives with better materials, at a lower price point which are readily available and will do the same job. I could buy 2 WTG knives for this price which are also done in batches and have great study designs. Just doesn't seem right to me, 700 for a knife which you can buy other knives with similar specs that will last a lifetime for much less.

@russellcharles7839 5 месяцев назад

@@jangierseugtools1845 Tell him what are the good reasons left out then.

@Joshuaskehan-mk8cj 5 месяцев назад

@@jangierseugtools1845I left a reply but I'm not sure what happened I think it deleted on me. My main point is yes it's a good steel but for 700 quid I don't want good I'd want great. 01, cpm D2, s30v, elmax, k390 etc. I have many khukuris from KHHI which people bash the steel online, but from my experience the steel is good. Holds an edge decently, sharpens fast and nicely, doesn't chip and so on. My main point is where are they getting the price from. For 700 quid I can buy two WTG knives which also are made in batches, from great materials and are solid. One WTG knife would last you a lifetime. Despite the great design and all the positives, definitely a big red flag being it costs 700 quid.

@jangierseugtools1845 5 месяцев назад

@@Joshuaskehan-mk8cj You should read arcticles from the knife steel nerds. He would 100% support our decision on this steel and never use high alloyed PM steels like Elmax for this. It is simply a bad choice due to super high carbide volume, which leads to super low toughness. 12C27, AEB-L, 1.4034 are a perfect decision for a chopping tool. An expensice PM steel does not mean it´s good for everything. DBK did not show the innovative lanyard, which goes through the handle and is much better than at the end. The handle is produced with high strenght titanium, everyting is hand made in Germany and no industrial product. So many details that explain the price at least a little are completely left out.

@encyclomatic5062 3 месяца назад

Markforged metal x is a 3d printer that can make metal objects and is considered a home printer.

@Biomass1 4 месяца назад

If I'm payin for a 3D printed handle then throw some wood handles on it and drop $600.

@outdoor-buddy 5 месяцев назад

This thing is awesome - as they guys from UG Tools are.

@mishnok11 5 месяцев назад

This thing is overpriced 💩.

@outdoor-buddy 5 месяцев назад

@@mishnok11 wow. What a nice comment.

@magking1971 3 месяца назад

You can 3D print titanium foam now. They make suppressors with it.

@fabiangartner836 5 месяцев назад

These guys have the most advanced machete in the world and all they do is talk about the price when for example a TRC knife can cost 500+ Euros😂

@leonidasnorway9821 5 месяцев назад

Yes TRC costs 500+ but TRC knifes is made of elmax M390 and other supersteels not the crappie 12c27 and all TRC is also hand made

@DutchBushcraftKnives 5 месяцев назад

Mikkie was trolling a bit too much :D

@rigajykra3159 5 месяцев назад

@@leonidasnorway9821I assume the convex was done by hand

@charlessalmond7076 5 месяцев назад

@@DutchBushcraftKnivesnah, its expensive...

@JosephOlson-ui2pg 5 месяцев назад

Why does a knife price matter? Guys hearing about it in 20 years would kill or give their left leg to only pay that price and it would only be having the money because there were lots to buy. You have to only look the wrong way through a telescope in time and see what a lucky bastard you are! Gawd, I'd love to live in Grandpa's time or in pioneer times! This is the GOLDEN age of knives, boys! If you only care about prices, they already got you by the balls!

@DinoNucci 5 месяцев назад

PizzA

@mussydesign7933 5 месяцев назад

3d printed grips are not as strong as injection moulded

@pietpromilleable 5 месяцев назад

SLM is plenty strong for such a use

@jangierseugtools1845 5 месяцев назад

Our handles will beat injection molding any day. It's high strength titanium why should plaster be stronger?

@mussydesign7933 5 месяцев назад

@@jangierseugtools1845 The layer-by-layer process of 3D printing can create weak points as layers are deposited, the finish is also porous another disadvantage is greater weight. I've been printing since 2013

@jangierseugtools1845 5 месяцев назад

@@mussydesign7933 this is not sintering, please inform yourself. There are no weak points between the layers at all, strength is almost identical in all directions. We have 1200 MPa compared to maybe 30 MPa for plastic? That's completely different level of strength. SLM parts are used in formula 1 safety components. If injection molding would be better they would use it. I worked also as a PhD student on this over 10 years from material developer to microstructure analysis and I can promise the material is incredible.

@danieltomasjr.5871 5 месяцев назад

Collaboration with Joe flowers would be awesome

@StevanOutdoor 5 месяцев назад

I don't think Joe Flowers will be interested.

@Herpetile 5 месяцев назад

for $800 no compromises is like....

@johncrouch8988 5 месяцев назад

Nothing wrong with hot dripping butter on fresh hot bread 🍞 yummy 🤤

@Barryhatchet 5 месяцев назад

Actually you can print a knife. There is some company I think in Denmark that can print high hardness steel around 70 HRC. I was talking to them about making a fixed blade. Talk to me for details if wanted. They make all kinds of hard steel products that can’t be manufactured the normal way. They can print with multiple steels in the same piece.

@topfueljunkie100 5 месяцев назад

Can you please share the name of the company? I'd like to check that out.

@Mo.89. 5 месяцев назад

400 Euro for TRC Apocalypse in Elmax with all the hand finishing or 700 Euro for this in 12C27 and 3D printed handle… how can they charge this much

@pietpromilleable 5 месяцев назад

Well the SLM print titanium with a printer that costs as much as a house. Ask anyone who is involved with that technology and they will tell you this is a fantastic price. I don’t know what people have with 12C27. It’s a fantastic steel with perfect toughness for such a product. We are just brainwashed to think everything needs to be PM steel to perform.

@ursusludens7174 5 месяцев назад

Clickbaiting and then blaming it on viewer, please don't

@JosephOlson-ui2pg 5 месяцев назад

I can't have Ug Tools because they don't ship to America. It's stupid. I wanted a knife only on Amazon Deutschland and wouldn't ship it to America. I hate bullshit that's for somebody else,and against me. I can't stand seeing awesome knives on DBK that aren't able to get here.

@philipputsch4687 5 месяцев назад

hey, we have been shipping to America since 4 months. so you can order if you want. And we are visitors on the Bladeshow in Atlanta this year.

@f1nch1312 5 месяцев назад

$800 for 12C27 🤣🤣🤣🤣 you can get 14c28n for next to nothing.

@kermitthorson9719 5 месяцев назад

i think midgsrd messer says they have a 100% 3d printed knife

@humbertobautista7773 5 месяцев назад

Falcata! Youre the Best guys!

@Muka0720 5 месяцев назад

Midgard Messer has had a knife with a 3D printed blade for a long time

@pietpromilleable 5 месяцев назад

UG Tools makes knives that have a purpose. The Midgard thingy was a marketing stunt with 0 advantage over a regular production process.

@Muka0720 5 месяцев назад

@@pietpromilleable Midgard Messer have occupied their niche in the world of knives, and if you are unable to perceive something, it does not mean that it is so. Unlike the Midgardians, I hear about the knife maker in the video for the first time.

@OzarkCherokee 4 месяца назад

I could buy a couple chain saws for $700

@connorpoopyhead1927 5 месяцев назад

can you do sum thing stong way tools

@wesleysnider2915 5 месяцев назад

Very nice video, had a eye on it for long. Its a very nice machety.

@hulkthedane7542 5 месяцев назад

Not your fault, it is crazy expensive.... but you are to blame for the clickbait title of the video. Not your style, and it does not suit you. Have a nice day.

@DutchBushcraftKnives 5 месяцев назад

Thanks for the feedback mate