No video :(

A TRUE No Sag Gate | 12ft Wide Steel Frame w/ Cedar

Подписаться 587 тыс.

Просмотров 154 тыс.

50% 1

Links:
*LOCKEY DEAD BOLT: amzn.to/32DvrXj
*2 WAY GATE LATCH: amzn.to/3hLjghn
*SS SELF TAP SCREWS: amzn.to/37N5Ei2
*ABUS GRANIT PADLOCK: amzn.to/33VsTVQ
*PIPE SLEEVE HINGES: www.springcree...
Overall tour with build details on my 12 ft 8 in wide steel framed cedar gate. Then we head over my friend Tyler's house and weld up a similar one that is split gate design. I know a lot of people will see this and say "well I don't have a welder", but mig welders are super cheap these days and it's very easy to weld mild steel. So stop by your local Harbor Freight and pick one up. You won't regret it.
~Check out Tylers RU-vid channel: / @tyleremenhizer6325
RELATED VIDEOS:
~BEST WAY TO BUILD A CEDAR FENCE: • BEST WAY TO BUILD A CE...
~HOW TO TRIM THE BOTTOM OF PICKETS: • If Your Building a Fen...
~12ft NO SAG GATE: • A TRUE No Sag Gate | 1...
~CEDAR FENCE AFTER 2 YEARS: • Cedar Fence Made Picke... `
~~~~~Help Support the Channel Below~~~~~
~Subscribe Here: www.youtube.com...
~Follow on Instagram: / nononsenseknowhow
~Donate via Paypal: www.paypal.com...
~Shop on Amazon from this Link: amzn.to/2uDE6eT
~My Gear/Tools on Amazon: amzn.to/36S6J6s
*I get a small commission on any purchases made through the Amazon affiliate links on this page. Doesn't cost you any extra and helps me to continue producing content. Thanks!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Other AWESOME Channels You Should Check Out:
~South Main Auto Repair LLC: / @southmainauto
~BleepinJeep: / bleepinjeep
~Project Farm: / @projectfarm
~Chris Fix: / @chrisfix
~Andrew Camarata: / @andrewcamarata
~Humble Mechanic: / humblemechanic
~Essential Craftsman: / @essentialcraftsman
~EricTheCarGuy: / ericthecarguy
~Sailing Doodles: / @sailingdoodles

Опубликовано:

24 июл 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 115

@fernandop937 2 года назад

2 years later and still the best gate I’ve seen fabricated at someone’s home! Real inspiration to a lazy new homeowner lol

@kwinterburn 4 года назад

The tension cable makes the install perfect, people forget the movement comes from the post bending this amplifies the drop in the gate by balancing the load you remove the droop, superb bit of simple engineering

@NoNonsenseKnowHow 4 года назад

For sure. While I have not use the tension cable yet, who knows maybe 10 years from now it will come in handy! Better safe than sorry. If I could go back I probably would have used a 6 inch post, but I didn't want to decrease the width of the driveway

@Caveman125 Год назад

I greatly appreciate your upload, I’m looking to build something similar and found a lot of information and never would have thought of the rebar in the fence posts. Thank you so much!

@ChaoteLab 2 года назад

“The hinges are just decorative.” Hell yes! No nonsense engineering at its finest. Clearly, sir, you do not shy away from overkill. You’ve made the Cadillac of all gates.

@leehansen7006 3 года назад

We built this gate! Thanks for the inspiration!

@NoNonsenseKnowHow 3 года назад

You built one the same style? That's awesome. Send me a picture of it would love to see

@leehansen7006 3 года назад

@@NoNonsenseKnowHow Sure, Email address?

@NoNonsenseKnowHow 3 года назад

@@leehansen7006 just saw the pictures. That is so awesome! Looks like almost the same span as well. Thanks so much for commenting and sending the pics.

@alandscape4622 Год назад

Fuck it’s probably the best gate I ever seen and am a contractor to be exact 20 year fence contractor let me tell you sir your are smart

@MotorSwapDan 3 года назад

Great video, thorough, entertaining and you showed all the unique bits you did making your gate.

@NoNonsenseKnowHow 3 года назад

Thanks man glad you enjoyed it

@alexyummmy 2 года назад

Wow, super impressed. Probably the best gate I've seen on RU-vid.

@MetalSphere10 Год назад

Nice gate, Chris. Overkill is underrated.

@JohnStrandt 8 месяцев назад

SS40 seems to be a fencing specific product. Pipe schedules are ASME standards for pipe sizing. Sch 40 is standard weight pipe (wall thickness). A 4” sch 40 pipe will be ~4” ID, and 4 1/2” OD.

@eschrader Год назад

13:20 the benefit of not having a post on the left if you try to pull your truck past. It's a bit back after the house edge so you can start to sweep the front wheels at an angle. That's what you should tell people 😊

@simplyhandy2769 3 года назад

No such thing of "Over-engineering" when it comes to your own home! Lol

@NoNonsenseKnowHow 3 года назад

LOL yeah I suppose so. Better to Overkill it and get the extra life span

@tyleremenhizer6325 4 года назад

Thanks for putting me in the video man! Your way of the gate is the reason why I went that route, very strong last forever! Great video on the gates, next time I will use bigger better post lol

@NoNonsenseKnowHow 4 года назад

My man! I appreciate you! Hope you're gate lasts for many years to come

@blakescorsone4958 6 месяцев назад

Hey Tyler; i cant find the exact link to the hinges for the 2 3/8 pipe that you have!! Could you post a link??? Please

@brolyv5802 3 года назад

Wow crazy secure!

@qomco 3 года назад

Nice work! Very secure

@annettesurfer 2 года назад

You could always half-lap the picket edges to eliminate the gaps. Just enough to allow them to slide across for expansion and contraction. Or it might be possible to cut a kerf-sized slot to insert thin strips of metal or FRP to provide privacy and perhaps additional stability for pickets that have a tendency to warp out of alignment. A half-lap would help there too but only if the warp is toward the lap, meanwhile a strip would probably need to be painted to blend. Just remember to reapply anti-seize on the fasteners to prevent dissimilar metal galvanic corrosion. I have a crazy idea to install lightweight cedar pickets onto an aluminum frame and rather than swinging inward or outward, use garage door hardware to slide it upward into a carport. Garage doors are segmented into panels to pass the track radius but I’d just use the top and bottom of the assembly to achieve the same purpose. I still have to determine how much weight a torsion spring can handle.

@rubenmartinez1140 2 года назад

looks great built very strong even a tank ram would have trouble 😁

@MISJPEREZ 3 года назад

Thanks for the links much needed

@NoNonsenseKnowHow 3 года назад

No problem Janina!

@thebeek123 4 года назад

After paint it looks like a million bucks. 😂 Nice editing. Like how you added the little girl swinging on the door in the wind. 👍

@NoNonsenseKnowHow 4 года назад

It's funny you say that , this was my first time using Adobe Premiere and it took me a god-awful amount of time to put this together since I was just learning how to use it. So thank you! Made my night. And yeah LOL, that clip is hilarious. Can't believe she held on to the door and if you look close she actually held onto her cell phone as well. Girl is tough as nails

@jfxr3576 3 года назад

Great video mate and wat a awesome gate ,I'm just making my gate at the moment and are going for a heavy gate your got some great ideas ,cheers from new Zealand

@NoNonsenseKnowHow 3 года назад

Thanks man. Happy to hear it you got some ideas out of the video. Good luck on your build! Cheers!

@Justin-kj5sv 9 месяцев назад

This is one of the best built gates I have seen

@glenmartin2437 3 года назад

Thanks.

@NoNonsenseKnowHow 4 года назад

I apologize for the re-upload. After uploading the original video, I did a small blur edit through RU-vid and it got stuck in limbo. Had to delete and repost to correct the issue. Also thank you to the couple guys that commented letting me know the video wasn't playing.

@kwinterburn 4 года назад

No problem nice bit of engineering as usual from you. Elegant is the word, overengineering is when OCD meets engineering. I'm guilty of that ... my kids playroom has a cable tensioned roof just for fun and to upset the mere mortals

@NoNonsenseKnowHow 4 года назад

@@kwinterburn thanks for the kind words and support man. The playroom roof sounds like a nice piece.

@christophermays8998 2 года назад

Very nice video I’m thinking about doing this at my new house

@NoNonsenseKnowHow 2 года назад

Thanks. Good luck on your project

@blakescorsone4958 6 месяцев назад

Hey man killer work! doing a similar build to Tylers house but I cant find those exact pipe hinges on the website that you used at Tylers house. Can you post a link to the exact ones PLEASE??

@Steve44036 Год назад

You sir just solve an issue of me banging my head against the wall on how to close the gap on my six foot wide door project. Also appreciate your tips on securing the post to avoid deflection. In addition, I like your robust security features. Anyway to get more details on the rebar set,up and security?

@TheLaidbackBiker 3 года назад

Outstanding!!

@leelunk8235 7 месяцев назад

YOU MADE ME A GOOD FOOT HOLDER WHEN I JUMP YOUR FENCE😂 IN 3 SECONDS

@najirkhanpahelwan5899 2 года назад

Excellent idea 👍

@operationhotshotinc.6887 2 года назад

How about adding casters to help with the sag

@vlsr71 3 года назад

Looks like i found the overkill channel. Alright!

@NoNonsenseKnowHow 3 года назад

Heck yeah man!

@makaimycynek4128 2 года назад

Do you have a material list for this?

@jasonestepp6846 2 года назад

Impressive

@law35penn 3 года назад

Those hinges are nice but not for some one who can't get welding done and expensive

@aledzbuilders 2 года назад

Impressive n interesting project.. thanks for sharing 👍

@gnawty4662 2 года назад

How did you screw on the Wooden pallets today to the iron? (What equipment did you use?) Looooove the gate Update: you used stainless steel self tapping screws 👍 - thanks!

@frankish5314 Год назад

Very nice.. I love the DIY gate hinges and might be stealing the idea. Are the gate posts galvanized or just regular steel?

@operationhotshotinc.6887 2 года назад

Thanks for sharing

@nawfalwaraqa3238 2 года назад

Very good job.. What is the brush thing in black called?thnks

@NoNonsenseKnowHow 2 года назад

Thanks. And I'm not sure of the exact name. I think I was looking up garage door brushes to find it.

@JPEBeard Год назад

Did you use 16-gauge steel post on for the fence (not the gate) or was that schedule 40?

@db0nn3r 4 года назад

Awesome gate. Hook us up with links to the hardware man. Been looking for those gate latches forever. Grease fitting Sleeves, gate latch and pin code lock. Link me up!

@NoNonsenseKnowHow 4 года назад

Thanks man. I'll see if I can find some links for the stuff and plug it in the description

@TomTom9290 2 года назад

Where did you get the 4 1/2" OD, 4" ID Pipe and collars? The largest pipe I can find is 4" OD.

@kimgardner4464 3 года назад

Too bad the fence at 4:08 was put in backward. Always polite to put in a fence with the outside facing your neighbor, so they don't have to look at the back side.

@davez2989 2 года назад

I have to ask WHY? When did this become a thing? If the neighbor wants a good side they can build their own fence. Why is the good side supposed to go to your neighbor? Why can' you be the neighbor? Especially if they aren't paying for any of it, and or building it with you. In my opinion you put the good side the direction that makes you the happiest. There are lots of ways to make a fence nice looking as well on both side.

@ShyRage1 Год назад

Lol, who made that a thing? If you're paying, you can do what you want. That's the rule.

@danielakalis 3 года назад

What is a helical rod? And did you bury that thing in concrete too?

@NoNonsenseKnowHow 3 года назад

It's a twist in ground anchor. In soil

@clarencewiles963 Год назад

101 Thumbs up 👍 comments

@GingerBeardMan_ Год назад

You mentioned making a video about filling the post in with rebar and concrete around the 8:10 mark, did that end up working to get rid of the sag from the added weight of the pickets? I looked but wasn’t able to find the video. Great channel btw! I really enjoy your overkill designs and creative solutions

@NoNonsenseKnowHow Год назад

Yes it helped out but I still wish I went with a thicker post

@salmanclay3668 9 месяцев назад

I've got a 65x65mm post holding a 1.3m by 1.8m fence up and can see some flex. Now that I have the reinforcement idea I will try it thank you.

@phantomg2151 9 месяцев назад

Does he ever mention the size wire he used to weld it

@NoNonsenseKnowHow 9 месяцев назад

.030

@farealwitit7947 3 года назад

would b nice if u edit the weld light out. very hard on the eyes

@NoNonsenseKnowHow 3 года назад

Noted. Thanks for the recommendation. I actually did that in one of my previous videos because the light was particularly harsh. Basically gave the viewers a little welding shade box

@Prairie_Barbarian 3 года назад

Wear your welding mask then

@rogervrooman1658 2 года назад

Awesome build, and I am using this to build a double swinging gate spanning 17'... Couple of questions, 1) what did you use to paint the galvanized posts and sleeves??? That black color looks so much better than just regular galvanized!!! and 2) Did you use wafer head stainless steel self-tapping screws??? (I tried the amazon links, and they don't work for me, sorry)... Thanks again, will shoot you pics of mine after complete in a couple of weeks... Roger V

@NoNonsenseKnowHow 2 года назад

Thanks. I used semi-gloss rustoleum brush on paint. And cleaned the galvanized posts with acetone first. It will tend to peel as it gets older though in areas. But it's easy to touch up. Hard to get paint to stick to galvanized.

@NoNonsenseKnowHow 2 года назад

And yes I used self-tapping steel screws. Actually ended up replacing them with stainless screws later down the line though to match the rest of my fence. Dabbed a little grease on each one also to help from the hole rusting out in the future. Good luck on your build!

@rogervrooman1658 2 года назад

@@NoNonsenseKnowHow Thanks much for the quick replies!!! Appreciate you documenting this!!!

@ShawnCNC Год назад

Great video! Where did you find the collars with the weld nut and bolt? All of the collars I see are the weld-on type. Thanks!

@NoNonsenseKnowHow Год назад

I made them

@NoNonsenseKnowHow Год назад

Unless you talking about something different. It's been a while since I did this project

@blakescorsone4958 6 месяцев назад

I think he is referring to the hinges at Tylers house. I can find those either?? In the video you said he found them online. But i think the link you had posted was the weld ok style you had on your fence.

@MrPhazeTwo 2 года назад

How much important is the rebar reinforced gate post and should I do that as well? I'm building a similar gate like yours.

@NoNonsenseKnowHow 2 года назад

I'm not sure how much it helps. I did it just because I felt the 4-in was thinner than it should be but the next size up was 6-in it was like double the price and also would have cut down on the width of my opening

@yuwang6469 2 года назад

Where can we find SS40 pipe?

@NoNonsenseKnowHow 2 года назад

I bought mine at suburban fence in Trenton New Jersey. I would think any fence supplier should be able to get it or stock it

@j808702 Год назад

can you come to hawaii to build my gate and fence? i’ll pay your ticket room and board .

@marcelclover6650 Год назад

DAM MAN.

@olderolderman4603 2 года назад

All those 🔐 s are to the honest people out right ?

@owstonlad3859 3 года назад

The basics of the gate are good, simple steel frame and wooden lath's but the accessories are, as been said, over engineered..... more suitable to fort knox.

@misaamane2850 3 года назад

What do you call that drop rod?

@NoNonsenseKnowHow 3 года назад

I call it a drop rod.

@NoNonsenseKnowHow 3 года назад

It's a piece of stainless steel round bar though

@Canamxrs 3 года назад

What gauge is that

@NoNonsenseKnowHow 3 года назад

I thought I mentioned it in the video but maybe I could be mistaken. It's 14 gauge and the vertical piece that the hinges are welded to is 11 gauge

@rickjames6948 2 года назад

Security? That gate keeps the honest people out. All those cypher locks crack me up. Probably a fire code violation more like it.

@jayfromtexas6718 2 года назад

Man! You don’t do anything half assed!

@blaydeesy2005 2 года назад

Are you building these for people? If not, you should be. I’d absolutely pay you to build one for me lol.

@NoNonsenseKnowHow 2 года назад

No I haven't taken on any jobs building these. I wouldn't even know where to begin with how much to charge.

@rickjames6948 2 года назад

WOW what a huge gap where the gate panels meet.

@ColdperpetratorLv 2 года назад

Yeah steel can do anything lol

@rickjames6948 2 года назад

Top horizontal steel is too low. No wonder your picket tops are deflecting all over the place. Should of repeated what you did on the bottom.

@BS.-.- 2 года назад

That's alot of gate for the theif to just use a cordless circular saw and cut a hole in the side of the house. But then again I bet the neighbors are alot easier to rob.

@DIRT-BOSS 4 года назад

Nice flag 🇺🇸🇺🇸🇺🇸🇺🇸

@NoNonsenseKnowHow 4 года назад

Heck yeah man! I actually tore it with my foot when I was hopping back down from sitting on top of the gate though. lol. Oh well, it was pretty faded and ready for replacement anyway. Got to order a new one.

@NoNonsenseKnowHow 4 года назад

@db0nn3r 4 года назад

Good man. Thank you!

@NoNonsenseKnowHow 3 года назад

No prob! Good luck on your build

@rickjames6948 2 года назад

Hope you have a light shining on that flag at night. Only way to display our flag properly.