A320 Home Cockpit Startup and Flight EDDM - EDDH

Подписаться 459

Просмотров 43 тыс.

50% 1

Please forgive all my uuhhhs and uummms and the bad general quality. This was filmed spontaneously with my phone in one hand after my post on reddit in r/flightsim got such overwhelming feedback.
In this video I go through startup, flight preparation, then flying from Munich to Hamburg while talking a little bit about my setup. If people are interested, I can make a video talking more in-depth about the technical details of my setup, the planning and construction.
Reddit post: / flying_vatsim_in_recen...
Software:
ProSim A320 Suite
Skalarki ProfilerIO
Fly Elise Immersive Display Pro
Microsoft Flight Simulator 2020 or Prepar3D
TopCat
Simbrief
ForeFlight (ff2fs for connecting MSFS)
Navigraph Charts and Data
NDP Charts (LIDO format, which I like better than Jeppesen)
vPilot (when flying VATSIM)
Hardware:
Vier im Pott customized Self Builder Cockpit, using Skalarki Panels
MFG Crosswind Rudder Pedals
3 Optoma GT1080e projectors
Projector screen made out of MDF panels
Main PC: i9 10900K, 32GB Ram, GTX 3090
Second PC: i7 2600K, 16GB Ram, GTX 1080 for MIP displays
ASUS ZenScreen USB monitor with touchscreen
iPad
Steelseries Arctis Pro Wireless
Logitech Z607 5.1

Игры

Опубликовано:

31 дек 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 105

@pilotpawanc 2 месяца назад

I think it's every aviators dream to get a setup like this and you are one lucky man!!!

@juancarloslorente668 2 года назад

Hi my friend, awesome simulator you have! I have seen which is your speed problem on final approach. Usually the standard steps during approach are: set approach phase at 20/15 mile before tdz, flaps 1 on final, flaps 2 with g/s alive, gear down, flaps 3 and 4 on the glide (but before 1000 agl). If you do so, you ensure that speed will be decreased to green dot before stay on final and all the further configuration stages (flaps 1, flaps 2…) will be on the right speed to set on. Your problem is that you set the approach phase very late and speed doesn’t goes down because the aircraft understands it is in descent yet. I hope you find this useful. Regards.

@a320home9 2 года назад

Thanks a lot. Will keep this in mind!

@NemoF4 2 года назад

Great Video! Looking forward for other videos. And great Setup. Thank you for the list of your Soft/hardware

@th3aviationguy 2 года назад

Awesome setup! looking forward to more videos!

@pkboy546 2 года назад

This setup is insane!

@fmproductions5978 Год назад

You earned a sub! You have really good production quality- keep going man!

@danilomihaljcic Год назад

Realy awesome simulator! Very nice!

@sundar999 28 дней назад

You've got an interesting video with a fully populated cockpit(Skalarki?) . Good thing your'e also open for suggestions. Most airlines put on the seatbelt signs at about 10000 feet I think, but in your airline they put it on at FL380 ;) But a very good flight in a nice cockpit, thank you !

@a320home9 27 дней назад

Yes, it‘s Skalarki. I have been turning on Signs at TOD since years, no idea why. Maybe next flight I turn them on at FL100. ;)

@Aveno_music 2 года назад

Verry clean 🤓

@Santy4tas Год назад

I LOVE IT!

@blacknass1943 2 года назад

ohu wow ! oh i see the MFG Crosswind ! :) Milan says the Boing Foot Rests ar soon redy to buy :) an i can say the Damper ar Crazy nice

@donniel7758 2 года назад

Hey how did you get all the buttons mapped in MSFS? There are many buttons in the A320 that can't be mapped in the game controls. Are you using another software for that?

@a320home9 2 года назад

It is done via SkalarkiProfilerIO and ProSim A320. MSFS has no say in that.

@Keitan97 Год назад

Hi, is the environment sound for prosim 320 still not that great?

@Capt_Tarmac 2 года назад

Great video..thank you. Where did you buy the equipment. I’m just looking into buying and building a complete home cockpit. I retired 1 year ago after 41 years as an airline pilot and would love an A320 or A330 simulator.

@a320home9 2 года назад

I got it from www.vier-im-pott.com/en/home . They deliver worldwide.

@filippodeluca9464 2 года назад

wish i had onw of these in my badroom

@hkr4life 7 месяцев назад

hi 1 question: the a320 prosim license for home cockpit is 1500 euro. Are the updates free? thx

@a320home9 7 месяцев назад

Hi, if you want to receive further updates, you need to buy a yearly subscription for ca. 150$ iirc.

@hkr4life 7 месяцев назад

@@a320home9 thx for replaying. congratulation. it's amazing

@hkr4life 7 месяцев назад

@@a320home9 1 more question: Does Prosim A320 have a Virtual cockpit? For example: if i use ProsimA320 in MSFS 2020 and i only have the pedestal like hardware, do i have the virtual £d cockpit like the Fenix?

@a320home9 7 месяцев назад

@@hkr4lifeNo, it only has 2D panels, but not for everything. So you definitely need hardware cockpit components.

@SamFlies Год назад

Hey just wondering are you using the exp, dev or stable version of the fbw?

@a320home9 Год назад

This is not FBW. I am using ProSim.

@itts 2 года назад

What A320 is this? The stock Asobo one? Or does ProSim provide an aircraft as well?

@a320home9 2 года назад

ProSim provides an A320 flight model and visual model for MSFS. It is still in beta though. Still flying better than stock Asobo or FBW.

@saren6538 2 года назад

@@a320home9 newbie question.... as it seems the prosim driver or whatver it is allows flawless connection from hardware to plane... can you buy this software/driver without the prosim a320 aircraft as i am reading its 1500 euros for a year licence ? thanks

@animatedchristmascollector3754 Год назад

@@a320home9 is it better then the fslabs or phonix?

@ScoobyMoony 15 дней назад

How much did the whole cockpit setup cost?

@Krsnda 10 месяцев назад

Sorry, this might sound dumb but is the ProSim the "payware aircraft" kind like the Fenix A320?

@a320home9 10 месяцев назад

Yes and no. It works like one, but it does not have a full virtual cockpit. You need to have cockpit hardware.

@jettrude 3 месяца назад

Hi can i ask how to bind the FDs of both captain and f/o side in one button? I got the f/o single trainer and Im trying to bind two functions in one button

@a320home9 3 месяца назад

I quickly checked and I do not have them synced. They need to be pushed separately. After startup, they are both on though.

@butter-pilot-a380 26 дней назад

Did you Made tue push Buttons your selv? Or did you ordered them. PS: good Video

@FlyWithRookie 2 года назад

Very nice job. Not sure if I missed it or not but what projectors are you using?

@a320home9 2 года назад

3 Optoma GT1080e, see video description.

@FlyWithRookie 2 года назад

@@a320home9 awesome thanks. I just purchased projectors too. How long did it take you to blend them for the 1st time. I know I’m up for a challenge.

@a320home9 2 года назад

@@FlyWithRookie Within one day you can have a decent result. But be prepared to be tweaking for some time. Some things you only recognize while simming.

@FlyWithRookie 2 года назад

@@a320home9 ok sounds good. Are you able to cover the entire screen with the image yet?

@a320home9 2 года назад

@@FlyWithRookie You can cover 1,5m height and 180 degrees completely. But you lose a lot of pixels. More pixels used, better warping quality. To utilize more pixels, you need to give up some coverage. In my case I sacrificed the left and right lower corners, which normally are obstructed by the frame or cockpit shell anyway.

@ryane2507 2 года назад

Hi can I ask does prosim fully work with skalarki products on FS2020 A320

@a320home9 2 года назад

Yes, it does. The skalarki panels are communicating with ProSim anyhow, no matter what simulator is behind. I can switch between P3D and MSFS at any time without having to make any changes to ProSim nor Skalarki hardware.

@theperfectpilot2135 2 года назад

Very nice , I like it so much , how much does it cost?

@a320home9 2 года назад

Thanks. Follow the link in the description, there you can check the latest prices.

@slaapzz 2 года назад

How do you get the blue lien go around thing 29:19 (hope you understand what I mean)

@slaapzz 2 года назад

nvm thought you where using a A32NX

@a320home9 2 года назад

ProSim calculates the GA automatically from nav data.

@saren6538 2 года назад

Hi may i ask would something like this work on the toliss A340? thanks

@a320home9 2 года назад

Well not fully with the A320 cockpit, since it is different from the A340. Also I do not know the Toliss A340 and its interfacing capability. In my case, with ProSim, the hardware does not interface with MSFS or Prepar3D at all, only with ProSim. So there is a hardware abstraction layer needed to be implemented.

@SamFlies Год назад

Have you tried to fly in the fenix a320?

@a320home9 Год назад

No. Afaik Fenix is not yet compatible with this kind of hardware.

@sgsandeepk Год назад

How much did it cost and is there a step by step guide anywhere in the internet to Sept up a simulator ????

@Chernyavskiy Год назад

About $80k

@SuperBoris81 2 года назад

👍👍👍

@bronzefanpage8256 7 месяцев назад

How do the projector screens look like at night time flying in the simulator?

@a320home9 7 месяцев назад

Well, it is not totally black, of course, and the overlapping / blended areas are brighter than the rest, but if you turn down the light in the cockpit, you can see all the details you need to see.

@bronzefanpage8256 7 месяцев назад

@@a320home9 nice! I just thought night flying might look more real, since the buttons arent that lit up :) but i forgot about the projector! Anyways, you have an amazing simulator! I wish i could have one one day 😃

@sgsandeepk Год назад

I would like to build one can you help ?

@dangames7400 Год назад

where did you get the a320 simulator?

@a320home9 Год назад

www.vier-im-pott.com/en/

@therobbit5657 2 года назад

What projector you did use for display

@a320home9 2 года назад

3x Optoma GT1080e

@therobbit5657 2 года назад

@@a320home9 but in the video I saw only two at the top, where is third one?

@a320home9 2 года назад

@@therobbit5657 All beneath the ceiling. One front, one left, one right.

@DavidStanko14 2 года назад

Where'd u get the fmc/mcdu and that from

@a320home9 2 года назад

www.skalarki-electronics.com/en/

@Straya65 Год назад

how the have more money then the average person plays simulator have fun p.s I'm jealous

@animatedchristmascollector3754 Год назад

Is there a option to change livery’s or use the iae engines in prosim a320 msfs?

@a320home9 Год назад

The ProSim flight model for MSFS comes with both engine types and you can also change livery.

@animatedchristmascollector3754 Год назад

@@a320home9 awesome do they have the Jetstar livery? Or how do you install them

@a320home9 Год назад

@@animatedchristmascollector3754 I am using the default liveries coming with the aircraft, in which I have not seen Jetstar. But there is also an additional livery pack which might have it included. In the sim you select the aircraft and the liveries like any other. They are installed via the ProSim suite and executables. But ultimately they end up in the Community folder of MSFS like any other addon. Keep in mind that ProSim is tailored to heavy duty. So all patches, flight model updates etc. can be done very easily. E. g. if the suite detects an available patch, you can download and install it on the spot, and all other modules and clients even across your network on client PCs are automatically patched to the compatible version, even during runtime. Also a revert or downgrade is possible and as easy as an updgrade, since in the suite you see the whole version history and can just install the version you want, no matter if higher or lower than your current one. So after the initial install of the suite I never had to mess around on file system level again.

@animatedchristmascollector3754 Год назад

Oh so is there a link to the livery pack? Or is it just included with prosim a320 as an addon

@a320home9 Год назад

@@animatedchristmascollector3754 Sorry, it is a paint kit with which people can make their own liveries. Sometimes people link their self-made liveries in the forums.

@Jassim-Al-Rahma Месяц назад

How muhc it approximately cost to have this complete A320 setup at home?

@a320home9 Месяц назад

Middle class car, depends heavily on what you already have, PCs, projection etc.

@hamzaouared7364 2 года назад

Hey, is it possible to pay a 2h session with you in your sim ?

@a320home9 2 года назад

No, sorry. There are many providers with way better and more professional setup than mine.

@blacknass1943 2 года назад

11:07 warum steht das Ordo ab Chao ? das ist doch latain und heist : aus Chaos wird Ordnung

@a320home9 2 года назад

Im Keller herrschte lange Chaos, bis das Cockpit ordnungsgemäß fertig war. ;)

@suryaachu4736 2 года назад

Bro how to build

@whii7y_370 Год назад

Can you release a full flight

@a320home9 Год назад

I need to think about the camera setup.

@MrBestvirginia 11 месяцев назад

He doesnt want his wife to find his secret room, thats why he talks to quietly haha

@m.c.7240 2 года назад

Hi. Kommst Du aus Hamburg?

@a320home9 2 года назад

Bayern.

@flobs83 2 года назад

Aus welcher Ecke von Bayern? Ich bin A320 Pilot und habe aus Platzmangel nur ein Mini-Home-Cockpit mit Skalarki/4imPott. Vlt. nimmst du mich mal mit und ich gebe dir bei Bedarf ein paar Tipps für deinen Approach 😉

@MT-oh2pu 2 года назад

How much it cost roughly?

@a320home9 2 года назад

Link to the company that builds it is in the description. There you can get the newest prices, depending on your config.

@abdullahalbuti7289 Год назад

How much dollars

@matthewkane502 Год назад

Could this work with x plane

@a320home9 Год назад

I have not tried myself, but I think in general hardware interfacing is possibly with XPlane and certain profilers.

@b0bl00i 2 года назад

That's an expensive way of looking at the clouds while the plane flies itself.

@ekjas_siket Год назад

Bolehla buak ghaso ghaso

@waltermelon3537 2 года назад

how people get that much money???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

@windshearahead7012 2 года назад

insane setup. Horrible approach management :P

@a320home9 2 года назад

What could I have done better? Always eager to learn.

@FlightAce100 2 года назад

@@a320home9 I know you were expecting to use managed speed all the way down, which appeared to be faulty, or it was going by the MAX speed limits which are not always recommended. Regardless, I always use selected speed to manage the aircraft's energy myself under 10,000ft with the idea of always being ahead of the plane. A big red flag during the approach was turning onto final approach at 220kts while on the glidepath. If it was me, I'd have dialed back the speed during those left turns while you had increased drag or better yet decend to the MSA and bleed that speed off. You cannot go down and slow down unfortunately, so you either decend, level off and bleed the speed or bleed the speed first and opt for a shallower decent starting further out. I personally perfer to decend first then bleed off the speed at idle thrust before decending again at a speed I know won't leave a heap of excess energy later on. Just my 2c on the matter, not a professional by any means :)

@a320home9 2 года назад

@@FlightAce100 I agree. Since I recorded this video, I give way more attention to separating descend and deceleration. Having to do both at the same time is never good. But even professional airliner pilots mention that sometimes they drop the gear earlier for the sake of drag.