AC Tools Every Auto Tech Should Have!

Подписаться 55 тыс.

Просмотров 4,5 тыс.

50% 1

Join this channel to get access to perks:
/ @flatratemaster
www.aeswave.com/
Amazon Affiliate link below - tools in this video
Power Probe PPTEMPKIT Red Temperature Kit
amzn.to/3xzv2su
POWER PROBE Add-on Temperature Probe
amzn.to/3VKCtVx
Robinair LD7 Premium Refrigerant Leak Detector, Red
amzn.to/4boDpEU
MASTERCOOL 58490-YF Universal R1234yf Valve Core Remover/Installer Master Kit, Brass,Silver,Red,Blue
amzn.to/3zm888n
Mastercool 58490 Universal A/C Valve Core Remover/Installer, Black
amzn.to/3XCp7xn
Mastercool 98234 Socket
amzn.to/4ez6oJ0
Astro Tool 7835 Protective Thin Wall Impact Socket Set - 5-Piece
amzn.to/3LACQ1K
Vessel Megadora 980 Impacta P2x100 #2 Cross Point Impact Screwdriver
amzn.to/3FvZnsH
VESSEL MEGADORA IMPACTA Impact Driven Screwdriver +3x150 (6") No.980 980P3150
amzn.to/3FCjFAC
Mayhew 61366 Dominator Pry Bar Set, Curved, 5-Piece
amzn.to/3TpCg8U
KNIPEX Tools - 2 Piece Cobra Pliers Set
amzn.to/3lnOcva
KNIPEX - 74 01 250 SBA Tools - High Leverage Diagonal Cutters
amzn.to/3LBtyTc
IAG Performance Multi-Directional Hose Clamp Pliers
amzn.to/40BX1AL
Vim Tools TMS34PF Torx Master Set 34 PC
amzn.to/3yO6clo
Vim Tools VIMMMS64 Mechanics Master Set, Hex & Torx
amzn.to/42C3v4r
Lisle 45900 Hood Prop
amzn.to/42rZkIj
Trusty-Cook Model 3-45 oz Polyurethane Dead Blow Hammer - Red
amzn.to/3Z5mMrD
www.amazon.com...
www.amazon.com...
www.milwaukeeto...
#flatratemaster
Instagram
/ flatratemaster
flatratemaster@gmail.com

Опубликовано:

8 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@gieauto7175 3 месяца назад

Those schrader valve tools are golden. As you said serious time savers. It's one of those tools that raise your confidence of not blowing an afternoon

@dougr3715 3 месяца назад

1234yf , I usually call it Twelve Thirty Four Yf. I have an old Snap On leak detector that does R12 as well as 134A, that I bought in the mid 1980s. I’ve been planning to buy that Robinair leak detector.I wasn’t aware that Mastercool made a socket for quick release fittings. Thanks for the video!

@ClaytheBMXer 3 месяца назад

The UVbeast lights are awesome. I have the big unfiltered one and it seems to work with any ac dye I can find. Much better than other inexpensive lights I have found. I believe I paid 60 bucks at the time.

@scientist100 3 месяца назад

the ATS kits are great for very small leaks, I would only use the material for very small leaks due to cost. I will be using pressurized nitrogen and soapy water otherwise whenever I can lol

@declanfarber 3 месяца назад

Conspicuously absent from this discussion is something that could detect what refrigerant you’re actually working with, an identifier. Some scoundrel trying to game the system could ruin your whole day (and bugger up your equipment and supplies.) You need to be prepared for this.

@eric-tr7gf 3 месяца назад

the reason some dyes dont reflect with all UV lights is the spectrum used by the dye manufacturer. Get a multispectrum UV light and you will be good to go for all the diff dyes

@corbettknowles9942 3 месяца назад

I have a leak detector put out by autool it isnt expensive and it it detects 134a now it's not directly a AC leak detector just for the automotive industry the one I have it covers like 410 r22 and different ones down on when I know it does not cover is one want the new one 1234 YF that's the one I use and it seems to work pretty good and it has a sensitivity setting on it

@mikekotarba5828 3 месяца назад

Thomas lech does good a/c videos using the micron method

@josephg3739 2 месяца назад

As usual great video

@davidkanengieter 9 дней назад

Mastercool valve kit saved my ass a lot of wasted time on many occasions.

@ryanwilson3632 3 месяца назад

I've got the power probe they really need to do something better those probes don't hang on vents very well. Half the time they fall off. I've also found compared to a fluke better with the thermometer it's about 10 degrees off what it says.

@oldguy2082 3 месяца назад

If the vehicle was more than a few years old, I automatically replaced the Schrader valves when doing an A/C service. Only takes a moment and cheap insurance for reducing comebacks.

@gieauto7175 3 месяца назад

Keep in mind with Co2, not to exceed the systems pressure limit. Never go beyond 200 psi or you'll be pulling money out your own pocket. Weld equipment can easily exceed this limit.

@smitty2jones 3 месяца назад

20/30/40 minutes for yf evac/recharge? nah, our robinair takes almost 40 minutes if the system is already empty. Add at least another 40 minutes if it has to evac.

@embreesmith7613 3 месяца назад

VACUUM PUMP MICRON GAUGE

@eugened41 3 месяца назад

Sold a lot of my tools to move on to a better carer and I don't miss it at all. It turned out to be a thankless job that I would encourage young folk to find a better job than this crap, everyone is called a Tech, more like a mule with no name. Your nothing more than a slave to the industry. If you hurt yourself fixing cars, you life will be over. Just because you want a great career, not worth wasting your time.

@DJV94022 3 месяца назад

So true, P.s. your local hvac residential guy(tech) that no one cares about even if the city is on a heat advisory

@frankstavalo5788 3 месяца назад

Unfortunately, there are a lot of industries out there that are the same

@eugened41 3 месяца назад

@@frankstavalo5788 I work as a electrician helper and I made more money and a lot less stress and I got bonuses and paid Holliday's. I don't think all trades are like automotive. I sold my snap-on toolbox for what I paid for and that is now my foundation for my Retirment which is very soon. I turn wrenches for many years, and I will tell you, I don't miss the bullshit scammers and there is no honor with these crooked shops operating. Private places and people like Ivan from pine hollow are a great example of how it should be done! Honesty is Golden. For example. Ford fiesta comes in for rotating tires and all the lugs need replacing and we do the job ,I look at the ticket and i almost shit 1,100. Really sad. I walked out that day. Never looked back.

@thisisausername1265 3 месяца назад

Shops invest in tools? LMAO Shame because testing with cheaper gases and proper billing would save $$$ in the long run.

@eugened41 3 месяца назад

Why talk tools when half of these so-called mechanic's can't read a clock. Most of these folks are scammers for a small company and are looking to have one job that pays for the whole shop for the month. The beat keeps going and that's all I see is angry customers paying through the nose for things that are not broken. Simple oil change turns into a thousand dollar's and everyone in the shop knows that there ripping them off. Sad to say that I don't want anything to do with criminals in this industry!

@COBRO98 2 месяца назад

More like Karen goes in for an oil change on her shitbox that's 4,000 miles overdue and finds out her front end suspension is shot or she's been slamming into curbs You have no idea what you're talking about