Accsoon CineView HE & Quad: Cost-Effective & Beginner Friendly! 

Is this good for livestreaming Like connecting to atem min pro?

the Accsoon CineView HE model does have USB/UVC output for streaming

Curious about this too. @BandH any idea if something like this would work?

Yes, The Accsoon CineView HE has very similar specifications to the Pro 2 in a more compact solution. Please note that HDMI is only supported.

Try a "Network Reset". On the transmitter: Access the" Network Reset" menu. Press the menu button to enter “Network Reset” → Select “Yes” → Press the menu button to confirm → Select “Yes” → Press the menu button to reboot. The SSID and password of the 5G WiFi will be reset to factory settings. Note: CineView HE has two WiFi signals, one is 2.4G and another is 5G. Please confirm that the mobile devices are connected to “Accsoon_****" 1. Please be sure to update the firmware. Please ensure that your mobile devices can access the Internet via WiFi. Open the Accsoon Go App, select “CineView'', then tap the “Firmware Update" button. The App will automatically search for the latest firmware update on the server. Once a new firmware is available, tap “Download" to download the latest firmware to your phone. 2. Update: Once the new firmware has been downloaded, connect your mobile devices to the CineView HE → Tap “Next” on Accsoon Go App to update. Note: 1. Make sure the battery level of CineView HE is above 50% before updating. 2. No power cuts should occur during the upgrade process. 3. The CineView HE will reboot automatically when the update is complete. 4. If you have any questions during firmware update, please refer to “Accsoon Go App Tutorial - Firmware update” video on Accsoon's official RU-vid channel. If these tips do not remedy the issue, please contact us:askbh@bandh.com >Mark

@@BandH Thank you very much for answering, I have tried pretty much all those steps, but when I click on firmware after a few seconds it pops up, you are not connected to the internet ? what I do not understand and think maybe the problem, if I am connected via wifi to the Accsoon, how is my iPhone all to be connected to wifi at the same time? And I have 4G iPhone , so I should not have to be connected to wifi? I have tried 10 times, if I have my wifi connected to my phone, it says I need to be connected to the transmitter and when I connect to it it then says please check your network? What the heck?

PS> Finally got it , thanks, You have to connect to wifi first then when the app says connect to device you have to, while keep the app open, then connect to the device when it asks... But it finally worked and updated in about 10 seconds... Not sure what improvements have been made but I am wondering why so many report that transmitting to an apple decide usually has less lag but mine is pretty terrible when connecting to an iPad from 5 feet away.. any suggestions on how to improve this? it is almost non useable. I have an iPad version 6