Accurate & Repeatable Dados With This Super Simple Router Jig

Подписаться 284 тыс.

Просмотров 190 тыс.

50% 1

Today we’re making a router jig. Cutting dados with a router seems so easy and yet can be so daunting at the same time. With this quick and easy shop-built jig, you’ll be cutting accurate and consistent dados in no time!
TOOLS I USE:
Bosch Router -amzn.to/2DwhZYG
Looking for BLEMISHED PEC COMBINATION SQUARES, DOUBLE SIDED TAPE and overall great savings ALL THE TIME? Shop where I shop! lddy.no/go67
YOU CAN SAVE 10% ON STARBOND CA GLUES AND ACCELERATOR!
Use the code “INSPIRE10” at checkout! www.starbond.com
SAVE 10% ON OLIGHT FLASHLIGHTS, TACTICAL LIGHTS AND HEADLAMPS!
Use the code "INSPIRE10" at checkout! olight.idevaffiliate.com/idev...
BANGGOOD WOODWORKING TOOLS: www.banggood.com/marketing-Wo...
MY HAND TOOLS, POWER TOOLS, CAMERA GEAR AND MORE:
www.amazon.com/shop/inspirewo...
VISIT THE INSPIRE WOODCRAFT SHOP: inspirewoodcraft.com/product-...
Adjustable Box Joint Jig Plan: inspirewoodcraft.com/product/...
Multipurpose Shooting Board Plan: inspirewoodcraft.com/product/...
All Purpose Tapering Jig Plan: inspirewoodcraft.com/product/...
EMAIL: inspirewoodcraft@gmail.com
WEBSITE: www.inspirewoodcraft.com
PATREON: / inspirewoodcraft
INSTAGRAM: / inspirewoodcraft
If you appreciate this content and would like to help give back FREE OF CHARGE, simply give this video a “thumbs up”, leave a positive comment, subscribe to Inspire Woodcraft’s RU-vid channel and SHARE THIS VIDEO with someone who you think would enjoy it. Some of the links that we’ve provided above are affiliate links. That means that when you make purchases through those links, we earn a small commission of the sale at no additional cost to you. While we do use affiliate links where we can, we only endorse products or services that we believe in. That commission is a big part of our income, which also goes back into making more videos, so by using the links you help support what we do and for that we are very grateful.

Хобби

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 269

@InspireWoodcraft 5 лет назад

Who else likes race cars in the neighborhood?

@gusfavoreto2966 5 лет назад

I like it!

@giantpune 5 лет назад

Save time and money having to drive to the track to watch the cars. I like it when the neighborhood teenagers rev up their hondas with their fart can mufflers. They stomp on the gas and launch at the stop sign and they've already shifted gears 3 times before they reach the other side of the intersection. It really gets my ol' lady in the mood.

@nmoran2046 5 лет назад

I wouldn’t exactly call of those racecars You could use the same idea for angled shelves to quote Izzy swan “jigs I love Jigs”

@adrianbrewer1708 5 лет назад

It didn’t stop me from enjoying and appreciating the vid bro. Nice job

@kouathao88 5 лет назад

No noise after ten where I'm from, the police are waiting lol

@sparks6666 4 года назад

Nice simple jig, vey useful. One thing you could do is make the jig long enough to do both sides of the shelf/bookcase. That way the shelf dado will be 100% lined up and you could knock 2 out in one operation.

@chriszeien9112 7 месяцев назад

Absolutely agree. I am going to build one to do just that. Always a good idea to dado both, you know they will be right on or as close as I would ever get.

@hogue3666 5 лет назад

I love seeing jigs like this that you don't spend a month to make. Awesome simple ideas to get a job done right! Well done, sir.

@InspireWoodcraft 5 лет назад

Thank you!

@mightyporky 3 года назад

I have watched you instruct before and now I subscribed. I am old now and still work in my shop, when I am not there I am on youtube. When I began woodworking TV was very new to most folks and No way to learn except hands on. The approach you show here is practical and informative. The fit was perfect as you know from experience to leave our friend glue, some room.

@thehobbyfanatic4610 6 месяцев назад

I am way late on the video but finally, an actual EASY jig a beginner can replicate. So many videos say easy jig then you click on them and guess what? They ain’t easy!

@yoohjeaneabe5018 4 года назад

i've watched a few router jig idea, damn they make it so complicated, yours is the best! the simpliest yet very practical and beginner's friendly, thanks a lot for the idea, i'll make one for my use...

@DunerecordsGent 5 лет назад

Love the very calm approch of this... a soothing voice and not that over the top " Hé Mom look, I'm a DIY rockstar on RU-vid " thing... Really love that humbleness ..... and a simple but clever idea..

@InspireWoodcraft 5 лет назад

HA! Well I appreciate that. Thank you!

@danielrisberg2112 4 года назад

Great idea! I really appreciate you showing when you make a mistake as well so that I can try to avoid it myself. Thanks for the video!

@calyodelphi124 2 года назад

I'm definitely saving this one because I want to build some custom plywood bookshelves for myself and my boyfriend when I can afford to do so, and I'm going to need to cut some dados! :D

@briankranson9195 5 лет назад

Nice job! One thought is to add a strip or two of tape along the rails to tighten the fit a tiny bit. :)

@InspireWoodcraft 5 лет назад

You know I thought about that too, but then I waxed it to make it slide better so I kind of screwed up that idea. Thanks for the suggestion though!

@samhoschar5794 4 года назад

Thank you from Petersburg Alaska. I have been watching your videos along with lots of other woodworking channels please keep them coming as I plan to build upper and lower cabinets for our kitchen. You put out great content and are safe at the same time. Look forward to your next ones. As always stay safe out there

@wannabefunnyman 2 года назад

I love these problem solver videos. For those of us who don’t have all kinds of money to throw at problems it’s great to find these videos that usually don’t require much aside from a trip to the scrap bin and some ingenuity, graciously supplied by you.

@Hateweek1984 4 года назад

Really ingenious and simple, thanks for the share! Appreciate it and will be making one tomorrow for my cabinet projects!

@JungleTedandtheLBP 5 лет назад

Really love your videos. Editing is great, your camera angles are excellent, your volume adjustment (and speed up moments) for when tools run.. everything right down to your very easy and calming voice. Look forward to the next video :)

@InspireWoodcraft 5 лет назад

Wow what an awesome comment. Thanks a ton for that. I don’t have a lot of videos under my belt and I’ve been trying different things to find a groove so comments like this are helpful. Thanks for watching!

@rico1319 5 лет назад

I use stuff like this all the time! Great video and thank you for sharing it! 👍👍👍😎🇨🇱

@MySickstring 2 года назад

I know this is three years old an you probably don’t read these comments, but a trick I learned about glue ups is, a pinch of salt in the glue will keep the parts from sliding around on you while you fasten them. Love the channel, the content and the simple way you out things. Hell of a job, brother. Keep it up.

@jackieb1432 4 года назад

Thank you! I am just learning woodworking and was looking for a way to make a jig so I could put a T-Track system in my workbench and this is perfect! I'll just make mine a little longer and then I'll be able to make 3/4" dado's at any time. If I need to, I can just cut it down shorter but if it works, don't knock it.

@kouathao88 5 лет назад

Thanks I've been meaning to make one of these and had no idea what it's called. Now I can finally get on it. Thanks for these tutorials my man, I often refer to your videos when I'm looking to build something cool. Keep it up man

@NZdiagnostics 2 года назад

I enjoyed the commotion! It's somehow fun to realise that you are not in a studio but are a real person in a real environment. Don't stress over it.

@woodprojectswithalex2692 2 года назад

I didn't see this excellent method anywhere! wow! Fair and straightforward enough to have a precise dado. Thanks for sharing that with us

@jeannettehoward7990 3 года назад

Love your videos, so simple when someone with knowledge explains it. Thanks

@charlessmith6636 4 года назад

I have watched many of these Dado jigs bud but this one was so easy to build thank you bud

@The9mmProfessor 2 года назад

Yes! Exactly. Simple. Build specifically for my router and bit of choice. This is what I wanted...well done sir. The race track is by my house too.

@adrianbrewer1708 5 лет назад

Great vid. Enjoyed very much. Keep up the good work. Thanks from the UK 🇬🇧

@michaelmaier2341 5 лет назад

This'll be a great jig for doing bookcases.

@InspireWoodcraft 5 лет назад

YES! That's exactly what I was thinking too!

@heathcurry8566 2 года назад

simplest and best video for a router guide I've seen, thank you!

@ladykenja2700 4 года назад

- Really good. I did this really simple jig for both my routers, palm & plunge. Thanx.

@albertandrade9743 3 года назад

Great Jig, been searching for something simple just like this.. Thank you for sharing...

@luimelo6280 4 года назад

Awesome! Super simple and awesome easy to set up. Thanks for sharing.

@darrenvictor2648 2 года назад

Simple but so effective! Thank you! What I also like is that you made a mistake and show the correction... impressive!

@CalvinJ82 2 года назад

Genius. Super simple and extremely versatile. Thanks for sharing.

@jodeath2000 5 лет назад

That is so simple! I’ve watch several “Dado” videos and this looks like the easiest way. Thank you

@InspireWoodcraft 5 лет назад

That’s awesome!! Thanks for letting me know and thanks for watching! It was completely on the fly so I’m glad people are getting some use out of sharing it.

@jodeath2000 5 лет назад

Inspire Woodcraft I’m going to use that method in just a few days. I’ll keep you posted

@nmoran2046 5 лет назад

The only slight disadvantage is that that jig is best used with that size bit In order to use the fence cut to line up your router cut if you use a larger bit they no longer lined up,saves pencil marks all over the peace If that makes sense But they are easy to make and you could make a lot for the different size bits required

@ytbillybob 4 года назад

Nice. I like your style. As for those kids and their race cars just remember we too were crazy in days gone by.

@dwayneford1990 2 года назад

Great jig. Thank you very much for this. Simple build with excellent results.

@shaynesabala Год назад

Love it. I’m pretty new to wood working but I’m good with my hands. I built my first jig last year out of simply safety. I had to make a ridiculous cut on a small piece on the table saw and saw bad things happening lol. I rigged up a simple jig and It worked great. I remember how satisfying it was to think it up and make it happen. I think that’s one of the things I like the most about wood working, one is only limited to their imagination. Thanks for the video.

@gerdashupe1546 Год назад

Your jigs are the best, simple but effective,simple to make and use. Thanks for sharing. The best to you from Napa Valley, Ca

@jarmstrong2843 3 года назад

A simple and sweet jig that's easy to make in a few minutes time. Thanks!!!!!

@BeckyBlanton 4 года назад

I'm making a "murphy desk" with shelves this weekend and THIS is exactly the jig I was looking for for my 3/4 lumber. Fast, cheap, easy to make and it looks like it works great. Thanks for the video. Don't worry about the cars. My neighborhood is a bunch of high end whiny motorcycles - MUCH louder and annoying than cars. You don't even notice the noise on the video once you start watching you work!

@robertodavanzo5711 5 лет назад

Nice. Simple and Smart design. Good job Friend

@hassanal-mosawi6049 5 лет назад

Thanks for showing how and sharing that, well done

@mburke1211 2 года назад

Perfect solution for my planned project. Thanks for sharing!

@jcsrst 5 лет назад

Gonna use that idea tomorrow! Thanks.

@2sweetpaul 5 лет назад

Thank you for the great trips. Enjoy your video's. Will help alot

@whomadethatsaltysoup 3 года назад

Thank you for sharing! Excellent, time saving jig! 👍

@kennyg6482 5 лет назад

Very clever idea and a time saver.

@jimscott64 3 года назад

That was a really good tip buddy. Works great. I hope I can remember this one the next time I have to do something with dadoes like this.

@BDL090754 9 месяцев назад

So simple, so good, Thank you for this one.

@TheWoodWerker 5 лет назад

Well Done Man! 👍🏼 Thumbs Up. Thanks for the tips! Have A Super Week!.....Gus

@poncho6784 Год назад

Thanks so much. Your vid’s are really helpful and great format.

@shamsularfeen1676 2 года назад

So simple yet so effective...thanks for the video.

@frogpondfarms3145 2 года назад

I just started watching your videos and they’re great. One idea would be have one arm permanent and then the other arm would be adjustable. That way it would be usable for a range of dado sizes and bits.

@timdales8300 2 года назад

Easy peezy!! Nice job! 😎

@gregghernandez2714 4 года назад

Great little jig. Thanks. Continue with your excellent video content. I am pretty sure most of us have learned to filter out background noise. Do what is comfortable for you. Thanks again!

@JonehJozieTM 3 года назад

Thanks a lot. It does help me. Keep it coming more videos like this. 👍👍👍

@deliaguzman1138 Год назад

Nice work, Jody!

@patrickdanna6363 5 лет назад

Dude!!! That was so awesome that you showed getting that second piece out of square and how to correct it!!! Most videos never let us know what to do when we mess up!!! And we mess up!!! Are you on patreon?

@InspireWoodcraft 5 лет назад

We ALL mess up!! I was really frustrated when that happened because I was in a hurry to do the actual project and this video was impromptu. But I though leaving it in there would be of benefit to some, so thanks for mentioning that. I AM on Patreon, I just haven't decided how to promote it yet. Thanks for asking. I believe the link is www.patreon.com/inspirewoodcraft.

@patrickdanna6363 5 лет назад

Inspire Woodcraft Be blunt. Tell how it will help you and in turn how that helps us.

@InspireWoodcraft 5 лет назад

Well said my friend and thank you so much for the support and encouragement!!

@the-handy-fixer 5 лет назад

Great little jig!

@geoffreynicholson6704 Год назад

Video was great back ground noise sort of helped made it real 😊well done. Geoff from uk

@kierannolan8859 5 лет назад

Love it,, so simple,, i would love to try that with a Dovetail bit!!

@DarylBambic 3 года назад

This is a great help for me! Thank you.

@tcbridges Год назад

Great Idea and going to be very useful. I will be using it. TY

@buzzpatch2294 Год назад

exactly what i needed- thank you very much

@thetwogardens6048 4 года назад

Nice simple method ! Will give it a go !

5 лет назад

Hi this is great. congratulations. i watched with excitement. thank you....

@felixreali7101 4 года назад

really handy jig. thanks for sharing

@belindamanning9851 5 лет назад

Very cool. Exactly what i needed. You made it easy.

@InspireWoodcraft 5 лет назад

SWEET! Thanks for watching!

@tinvy8291 2 года назад

Thank you very much, I being using Dado stacked table but can’t do anything longer then 30”, this will work perfectly.

@tvfrance3667 2 года назад

Thank you,,, the background noise is real life brother. Appreciate your lesson and expertise!

@mikedisimile2478 2 года назад

Great job explaining everything thank you

@nevillewebb2856 2 года назад

I prefer the ‘live’ commentary ! Great content, calm and very professional 👍

@waltermuehlebachn.5782 5 лет назад

Nice simple solution, thanks.

@fernandoescalante7753 Год назад

I am a fan of your work and have watched a few of your videos already. I have to say that I prefer you talking to the camera as opposed to voice over. I also appreciate you leaving in the part where it didn't come up square and you fixed it because often times in videos people just say check for squares and then move on but don't explain it show what happens if you're not square.

@josecenteno1454 Год назад

Nice idea, congrats

@paskmoe4969 4 года назад

thats so good...very nice build

@spacecraftbuildingservices Год назад

Really helpful and clear thanks

@christiancarrere319 5 лет назад

Hi, very nice jig but better explanation! Thank for yr effort to do that appreciate. Grettings from Argentina. 👍

@InspireWoodcraft 5 лет назад

You're welcome and thanks for watching!

@whitey211 Год назад

I used a parallelogram jig that I originally made for doing cove cuts on the table saw and it was super quick and easy.

@chikowhitey 3 года назад

thanks from Australia mate....great vid

@rrpp1425 7 месяцев назад

Excellent and helpful.

@enriquesanchez2662 3 года назад

Thank you man🙏 I gonna try that good job 👏

@grumpywiseguy5992 3 года назад

Great video!! Shelves are my worst nightmare. I have never done a successful dado. Instead I use a Festool Domino to do blind shelves in wall units and bookcases. Alignment is always a problem however along with getting the dimensions of the shelf to match the interior measurement of the shelf at the position of the shelf in the case. I will definitely try this. Better than fooling around with $300 dado sets for a table saw. Thanks.

@sprntkr 5 лет назад

really enjoying your channel. keep it up

@InspireWoodcraft 5 лет назад

Wow thanks!!

@richardljohnson9727 3 года назад

Thanks for the video just one day at a time take each day as it comes

@MOSTAFA131160 3 года назад

Great job and idea, thank you.

@MrBigMalT 5 месяцев назад

Nicely made! I guess it still depends on how accurately you line up the router cutter with your 2 pencil lines when making the jig. A different way of doing this would be to use a bearing guided cutter, and use a scrap of the actual plywood on edge to set the width between the 2 sides of the jig 👍

@johnawhiting 4 года назад

I like it, Thanks Soooooo Much. One more Jib to add to my ever growing list. :-)

@johnfitzgerald6294 3 месяца назад

Great channel!

@popscoulter7587 3 года назад

I just built a cabinet with shelves. It turned out fine but this would have save me some time. Good video, good job. 👍

@ncsouthernman 4 года назад

this is not exactly the idea that i had for my project, in that i have the correct size bit for my router, but this helped me alot. i believe that i can start working on my project soon. thanks for the help.

@arronnorton8457 2 года назад

Cool idea just what I need

@JimSlaughterOC 3 года назад

Thanks, very good video!

@johnbell1012 5 лет назад

Video turned out great!

@InspireWoodcraft 5 лет назад

Hey thanks a ton for saying that!

@hardrock1826 3 года назад

Thank you. You have created a simple solution for a big problem. Don't know how many times I have done the double pass so that the shelf will fit and it's been too big. And then there are the few that I had to make a third pass because the second pass was too small. A few projects I put a face trim on to hide my too big of cut channels. Embarrassment trim I call it. If I use white melamine stock. I can fill in the too big of a channel with some nice white caulk, that makes it look almost done right. I am definitely going to make one of your "neato race car jigs."

@kedso2769 4 года назад

Good job!

@kenerickson4923 3 года назад

I have similar jig, but the 2nd cross piece is adjustable so I can use it on any width shelf. The edge pieces have a slot and the movable cross piece has a threaded insert with wing nuts to secure the cross piece in position.

@garrysmythe 5 лет назад

another great little video, trouble is I enjoy watching woodworking videos that much, I don't get to do my actual wood stuff lol , big thanks again for posting , from Garry in the UK

@InspireWoodcraft 5 лет назад

Ha! It happens to all of us! Thanks for watching instead of working!

@papergatorzfedducca7998 4 года назад

New subscriber!! Nice tip!!

@noracares1349 3 года назад

Excelente su guía gracias ideal para aplicar en tiempos de ocio y cuarentena

@shaynesabala Год назад

I almost forgot. I watch this on my tv and I didn’t really hear any background noise until you said something. Heck I would of never known and it surly wasn’t bothersome.