Accurizing Kit for the Ruger® MK IV™ Installation

Подписаться 7 тыс.

Просмотров 109 тыс.

50% 1

*IMPORTANT INSTALLATION UPDATE!*
Your Accurizing Kit comes with 3 spacers, but not all spacers are used, depending on your specific pistol.
The spacers are: (2) stainless spacers, of different thicknesses. You may optionally use one of these spacers in step 6 on the hammer bushing. Ruger frame dimensions vary, so we provide two choices for you to select the best fit for your specific frame.
(1) black spacer. This spacer is for 22/45-style frames only and is used in assembly step 1 between the sear and spring.
In this video we look at the installation process of our Volquartsen Accurizing Kit for the Ruger® MK IV™.
The complete drop-in kit comes complete with our CNC Machined Disconnector, Target Hammer, Hammer Bushing, Target Sear, Target Trigger with plunger and spring. It also comes with pretravel and overtravel adjustments.
The Accurizing Kit for the Ruger MK IV will provide a crisp, clean 2.25lb trigger pull. This kit will eliminate the magazine disconnect.
View our complete line of products at: volquartsen.com
Follow us on Instagram at: / volquartsen_firearms
Like us on Facebook at: / volquartsen

Спорт

Опубликовано:

28 сен 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 194

@bryanjkoop8316 3 года назад

Give your 3D graphics guy/lady a raise.

@Taylorc52 3 года назад

Seriously! Extremely helpful!

@akaTheDevil 3 года назад

Totally agree! This is the future of tutorials

@EnricoSWE 2 года назад

@@akaTheDevil Hopefully

@meridianrenovations8904 Год назад

Couldn't have been better said.

@davedave9552 8 дней назад

Just got this put in. My first time taking apart a MK4. Looks complex at first, but with patience and some good needle nose pliers the trigger is now amazing. My teenager was a helpful second pair of hands.

@ddunnum 7 месяцев назад

I watched the videos, and the instructions were excellent... Enough, so I gave it a try. I have had a couple strokes and such that mess with my memory, coordination, and confusion. It took about 4 hours Friday evening and about 4 Saturday morning. Chased after small parts 100s of times. Friday night, I was ready to pack it in and send it to you all to fix, but Saturday morning, I got up and watched the video again. I redid the sere spring and sere install one more time because I had messed up the spring, but in the end, I did complete it, and there were no leftover parts or missing parts either. I love the trigger. It is a fantastic upgrade. Please do not take this as a criticism. This was the first time I had tried something like this. The video gave me the confidence to attempt, and Jesus kept me calm. I had to pray a lot for patience, which always works. Thank you for making a kit that an addled old man can assemble. Prayer and this video provided me with success. It was satisfying stepping out to my firing range and making the steel ring. Thank you!

@volquartsencustom 7 месяцев назад

This is great to hear! Appreciate the kind words as well as your patronage.

@davidaguiar1387 5 месяцев назад

I've tried the kits from TK, Apex, Volquartsen and even a mix of these brands across 5 different Mk IV's. The Volquartsen Accurizing kit shown here easily produces the lightest and crispest trigger of them all.. Excellent customer service too!

@volquartsencustom 5 месяцев назад

truly appreciate that - thank you!

@charleshill9236 Год назад

The Volquartzen trigger kit is fantastic! Can't believe how much it improved my mk4. Shoots like a dream!

@volquartsencustom Год назад

appreciate the kind words, thank you so much!

@Dglog22 Год назад

Just installed this. Couple notes. I had a tough time depressing the bolt catch spring in order to push the trigger pin out. I had to get a small enough but not too small Allen key and push down right on top of the spring, not the catch, in order to get it. Also, the sear spring long end does not need to be visible when installed. They skipped the part where the tail goes. It does not go in the mag well. It goes in a small gap in the grip which is a little tricky getting it seated in there. Plain tweezers helped me get the sear spring, spacer, and sear in. When you install the hammer the dangly part goes in the little divot behind the sear. The sear must be pointed up and pressed against the short tail of the sear spring when you slide the safety and pin into place. You can get the hammer in with the sear down which is what I did first and it did not function properly. Those were my only issues and it still took me about 90 minutes to install. Extreme improvement from stock.

@AINUARKR Год назад

I too pressed the bolt catch spring for a long time until I realized the spring you're supposed to depress to get that pin out is on the opposite side of the gun, and it looks like a pin, no spiral.

@MrChaso123 10 месяцев назад

I made all of the same exact mistakes. You are a live-saver though. Couldn't figure out why my safety and whole entire mechanism wasn't functioning, the dangly part isn't in the little divot for mine, my mistake. Saved me from taking this all back apart completely and starting over. Thank you!

@Dglog22 10 месяцев назад

@@MrChaso123 nice, that’s exactly why I made the comment. Glad it helped!

@DD556762X51 2 года назад

Had Volquartsen install this kit on my MK IV this past week. Great turnaround time and professionally done. The difference is phenomenal no comparison to the Ruger trigger. Smooth and light same as the trigger on my S&W mod 41. This is a must have for the Ruger MKIV.

@volquartsencustom 2 года назад

So great to hear!

@leonardpearlman4017 6 месяцев назад

This is just what we all wanted to hear! I was a little surprised (in the video) that they will do it, but I watched the rest of the video anyway. Nice clear presentation. I can do this kind of work, but will I just buy the parts and then "get around to it"? SOMEDAY? I looked at their website and it seems simple and economical, I think this is good news! Days Later: I have a SW Model 41 actually, and took both out on the same day... by comparison the Ruger trigger felt like there was something wrong with it, I kept thinking the safety was on! YES, somehow I got spoiled by just watching a video and reading a few comments.... It turns out that the Volquartsen web site describes everything in detail, is very clear and organized, and allows you to sign up for installation too. I think they want US to do it ourselves and make it easy.... But it's too easy to imagine buying the stuff, and then taking a year or so to even get around to it... and now the little kit is LOST....

@franktower9006 4 месяца назад

If you can't do it with this instructional video, better stay clear of customizing at home. Simply perfect.

@David-ym2vk Год назад

Best trigger install video I’ve ever seen by far. Also possibly the best install video I’ve ever seen. Well done. 👏🏻

@Taylorc52 6 месяцев назад

Had to reinstall my trigger after some service. 3 years later, still in incredibly helpful video.

@volquartsencustom 6 месяцев назад

Great to hear!

@hatchetjack88 3 месяца назад

Excellent video! Made the installation very easy. Thanks!

@jdixon1234 3 года назад

That was an awesome video and presentation.

@ChrisBrooks-ig5fb Год назад

I just did this upgrade on my Mark IV Hunter. It took about 1 hour and came out perfect. Thank you for your great instructional video!

@1970351C2V Год назад

One important detail that's included in the write-up, but NOT explained in the video is that the Sear Spacer is ONLY used on the 22/45 version. This was giving me fits during the install until I realized my mistake. Triggger is 100x better though, great kit.

@richb2229 Год назад

I noticed slight differences between this and my gun. And I didn’t get a spacer just the larger sleeve.

@sde9023 11 месяцев назад

TY for that info! I was trying for over an hour to try to wiggle it and even sanding the spacer with fine grit. This should be the top comment!

@renepils1409 Год назад

Just did the install with no education in gunsmithing, only this great video. Piece of cake and the Volquartsen trigger is gorgeous! Thank you Chad for the spot-on demonstration!

@volquartsencustom Год назад

That's great to hear! Thank you for sharing.

@microstar123 Год назад

Great foolproof Video! :) Just installed the kit in my wife´s Mark IV 22/45. Works great! Greetings from Frankfurt, Germany!

@volquartsencustom Год назад

Great to hear!

@joshbrekke6374 8 месяцев назад

With this very well done video my install into my Hunter was by the book perfection. Thanks, from a very happy customer!

@volquartsencustom 8 месяцев назад

Great to hear!

@Juliang61 3 года назад

Outstanding video

@tiffanyprice862 3 года назад

FYI if installing on a Mark IV no spacer is required when installing the sear and sear spring.

@bradb.4570 3 года назад

you just saved me. I was about to go green and hulk smash everything lol

@HellGatefr2 3 года назад

Thank you, it sucks that they didn't feel like this could be a valuable addition to their tutorial

@shawnbaird9868 3 года назад

Yes! I spent about 30 min trying to get it all in there and then read on Volquartsen's website that the spacer is only for the 22/45.

@philippk819 3 года назад

Already wanted to post that installing the sear completely sucks...when I saw your note...thanks ;-)

@17hmr243 3 года назад

thank you

@franktower9006 4 месяца назад

Outstanding video!

@ObsidiansArms 3 года назад

This was a great walk through!

@whittler3358 9 месяцев назад

Watched this 6 times finally did mine,,,, took 2 hrs! But I’m no gun smith,,,plus searching for dropped springs and spacers took most of my time,😂 your great graphic gave me confidence to do it ! Thank you!

@krisberntsson5802 Год назад

Perfect guide, was little bit trickier then the video thought 😁 but now got a much better trigger on my ruger mk4 😁😁

@volquartsencustom Год назад

Great to hear!

@richb2229 Год назад

Just installed this, disconnect or, and a new firing pin and extractor on my Mark III 22/45 lite. Dealing with all those little parts wasn’t easy. I had trouble aligning the sear and it’s pin and getting the safety on the pin and keeping it in place while i put the hammer on. I ended up using brass punches as alignment tools which made it easier for me. But wow what a difference significant reduced pre travel crisp light break and no excess over travel. And the trigger reset is very short. It was a good gun before but now it’s awesome!

@johnanderson5279 6 месяцев назад

Success!!! After i figured out which bushing for the hammer. SO MUCH BETTER THAN FACTORY!

@blurryhmong 6 месяцев назад

This trigger is awesome took 40 mins to install. The part that was hard to see was the sear spring make sure you install it down and in to the handle cut out. Everything else was cake.

@jakubteply4988 Год назад

Chipping to Europe and the price its self wasnt small, but the diference is amaizing. Definitely worth bying it. The trigger is nice, smooth, chrispy almost like CZ. Love my Ruger Again :-) ...btw Video manual is fantastic, thank you!

@obsidianskin9502 Год назад

procrastinating putting this on because i was a little scared. this wasn't too bad! range day is tomorrow :D

@volquartsencustom Год назад

great to hear!

@John-yt2dt Год назад

If you enjoy depot level firearms maintenance, and are comfortable with "some assembly required", then this upgrade is doable at home. It really does help to have locking forceps or spring loaded tweezers so that one can grip the tiny spacers as needed, and maneuver the sear. I have a Mark4, 22/45, and have dissembled the same amount for through cleaning. This kit has made an awesome improvement to my pistol. I do agree that there needs to be a better explanation of the correct spacer to use for the hammer. It was helpful, when I first acquired the Mk4, to watch several of the comprehensive disassemble and reassembly videos; and practice before this upgrade.

@nojoy7238 Год назад

I'm going to be watching this video step by step when I try to install this

@volquartsencustom Год назад

don't hesitate to reach out to us if you have any questions!

@HellGatefr2 3 года назад

DO NOT USE THE PROVIDED ALLEN WRENCHES, I almost rounded my right safety screw because of their bad soft allen wrenches... Use a good quality one, and make sure you heat up this screw if you feel any resistance ! Other than that I'm VERY happy with this kit, the original Ruger Mark IV trigger is very bad imo. This + tandemkross trigger feels great ! In France we pay 950€ for this gun brand new, oof

@byronc.9861 2 года назад

I rounded mine. Now what? Edit - was able to get the allen screw out with the help of a soldering iron and a different allen wrench. Apply the iron directly to the screw (but not too much, or you'll melt the safety lever), and it should come out.

@ASEKen Год назад

I just installed this kit in May Mark IV Competition. Before triger pull was 5 lbs, after triger pull is at 2.2 lbs. A night and day difference.

@volquartsencustom Год назад

That's great to hear!

@toddb930 3 года назад

Nice animations

@nhbilly 8 месяцев назад

Wish I had this kit after taking my Mark IV apart. Well at least taking it apart and putting it together isn't too complicated.

@jamesnichols8893 11 месяцев назад

I just finished adding the install of this kit on my Mark IV 22/45 I was not as fast as you but I was able to complete it easily wow what a difference it made in my accuracy money well spent.

@cakeeee4 3 года назад

At around ~10:30 if you can't get the hammer to go back, the floppy bit on the bottom of the hammer needs to go into that divet/hole thing to provide tension. If it's not in that divet/hole, it will not move or the safety will not move correctly. They missed a step in the callout, the floppy hammer secondary bit needs to go in that divet and should've been called out in simpler language and maybe a CG shot. If you can't get the hammer to cock back, this should solve the issue.

@EnricoSWE 2 года назад

I did put that free floating thing into the little silver hole. I still cannot make the hammer stay down, so it wont go into safety, the hammer will always pop straight upp immediately, ...

@EnricoSWE 2 года назад

It seems that I ACTUALLY lost those smallest parts... The Safety Detent Spring (27 in the instruction manual) and the Safety Detent Plunger (28), those who has to go into the Safety (26)... It is not inside the Safety and I can't find them anywhere on the floor etc... Does that explain my hammer malfunction, I really lost those two small part, classic comedy

@jondeitch7884 2 года назад

If you have a Ruger Mark 1 through 3, you know the importance of getting the hammer strut into the main spring. 😁

@vcovey8043 Год назад

Put the floppy thing in the hole? 🤔 hmmm, I shall get the wife for that as she's alot better with that sorta stuff as without her help I feel like a retard humpin a door knob 😂. I swear it's due to my ED an not her 40yr oddly saggy but fluffy dog of a body! But the dand broad can cook like a pro though! I love her cookin an the kiddo ain't 18 yet an not tryna pay child support so I gotta deal with it for now 😢 but once 3 more years till my boy is 18 an on his bday I'm 100% gonna catch atleast 1 STD, depending on how many fine younger strippers or prostitutes I can get for atleast 2,400$ atm that I been savin up an hidden inside my Rifle bag lol🎉. This is way to long an not sure why I said the words above......😅

@RickJZ1973 2 года назад

The 3D schematic is great. Would be nice to have one done for the MKII and MK III.

@SLOCLMBR Год назад

Yea, I used TNP footage to get comfortable with the teardown on the mkiii Nutnfancy has some great videos on these pistols

@user-jm3sv7rv9w 6 месяцев назад

i would like to know if sear spring goes into the magazine well or behind and also which bushing is used for a 22 mark iv hunter . your video does not show where it is going into and it can go either place. i think paper install instruction on that part would be helpful thank you

@allenurbatsch8307 3 месяца назад

Video probably needs a few updates such as where the bottom of the sear spring ends up... I put it in the window.. also maybe do a video for a kraken install..kraken sear had some creep... This kit fixed that issue...

@30shawnmoe 3 года назад

The hammer bushing spacers - you tell us there are 2 but not which to use for each model. Also, you should note in the video that you don't use the spacer between the sear spring and sear. Because the sear spring spacer will fit, but it's VERY difficult. Then the gun does not work and you have to take it back apart.

@badcrcz 3 года назад

He says he's using a 22/45 and the video shows the thinner washer goes on, which means the thicker washer is for the regular MKIV. Yes, that should be more clear. I used needle nose pliers to grip the sear in the center groove without blocking the hole, then pushed it into place, first over the spacer washer so it wouldn't drop out, then i wiggled the pin back out a little at a time until the sear went over the pin. Wasn't easy and it took me a few attempts.

@Gigachad2a 2 года назад

Easy did it in about 30 mins this am.

@Brandi6666 10 месяцев назад

Dam. Glad i read comments, i thought this was all being done to take off the right side saftey 😮

@leonardpearlman4017 6 месяцев назад

Well, you can definitely do THAT yourself! They supply instructions and I think a little bushing with the new gun.

@teller_of_truths6499 Год назад

If anyone is wondering how difficult this is. If you've assembled an AR, you can do this. Took me about 45 minutes only watching this video. Only tools I had were a small flat head screwdriver, and some needle nose pliers.

@drewjonespdx 5 месяцев назад

needed to read this thanks

@thedrunkenchefs4577 3 года назад

Which hammer bushing spacer do you use for the 22/45 or the regular Mark IV? b

@17hmr243 3 года назад

thick 45 thin mk4

@tomsdreamshopworx 3 месяца назад

I bought my MKiv 22/45 used with the Volquartsen kit already installed. Today at the range it appears the sear spring got behind the sear and the sear would not engage the hammer. This video helped get it back where it needed to be. Thank you!! Any thoughts as to how that happened?

@volquartsencustom 3 месяца назад

Great! Hmm...that may have been something to do with the sear spacer or spring installed incorrectly.

@akaTheDevil 3 года назад

I got 22/45. Came with 2 spacers (white and black). Which one goes where?

@ironmonkey1512 Год назад

Some cheap HF locking forceps were a lot easier to use than needle nose pliers.

@dakine808shooter 3 года назад

Sear spring goes in handle would be nice lol ...other than that this videos worked for me

@scottc543 Год назад

@Kolya Parker It either goes down into the handle or down into the mag well. I'm thinking that the mag well would be a bad place to have a spring so I'm going with down into the handle.

@daledoback9566 11 месяцев назад

7:28 I have way too many questions about setting the spring tension for the seer it’s unbelievable. Everything else in the video ended up working out alright in terms of a clear description, except for this part.

@volquartsencustom 11 месяцев назад

shoot us a message at tech[at]volquartsen.com or give us a call at 712 792 4238

@cummings37128 2 месяца назад

Really great video!

@Michael-oj5pr Год назад

Good stuff and works very well. My only gripe is the supplied Allen keys are NOT suitable and metric while the screws, the slide release in particular, are imperial and using the supplied Allen keys destroys the screws. No reply AT ALL from customer service.....

@fish4usa433 3 года назад

Can you guys do something with the sr22?

@m0cho 2 года назад

I have a mark iv 22/45 lite an didn’t need the spacer in between the sear and sear spring is this normal for this model ?

@kingkong2598 Год назад

There are many different kinds of mark4. Which one do you recommend?

@greenefieldmann3014 Год назад

Hi, Chad!

@chrismerrow3368 Год назад

Is it normal for the bolt stop to be loose and wiggling after the installation?

@jamesharris184 2 года назад

For all of you doing this by yourselves, you are on another level! What would be a fair price for a gun store to charge to do this? Can you buy these kits in Canada? I have only been able to find American sites and those import fees are a kick in the teeth.

@MF-hz6xx 2 года назад

Got estimates from 40-150 USD. Ended up DIY using small needle nose and the provided Allen wrenches to guide from the reverse side also blue painters tape to keep pins from falling out was helpful.

@johnanderson5279 6 месяцев назад

Which hammer bushing is used for the mkiv target ?? Fat or thin ??

@dannyhewitt3652 Год назад

I would’ve liked to have seen him test a trigger for poundage

@paulmanhart4481 5 месяцев назад

What does this cost for a Ruger Mark IV Target? Assuming you do the work? Thanks. Oh, also, how would I mount a Holson green dot on this gun? Paul

@volquartsencustom 5 месяцев назад

The kit is 152 + 105 if we do the installation.

@markeisenhower6422 3 года назад

Wow thats stainless mark 4 22/45 stainless is it available now?

@brokenrock2 3 года назад

It is just a stainless target model barrel and bolt on a 22/45 frame.... I've been swapping my 22/45 and target barrels and frames around to get a perfect gun, and I really like the 22/45 lite barrel with a compensator on the heavier target model stainless steel frame.

@brianfeller6142 Год назад

Installed this the other day on my 22/45 lite. Went to the range and it will fire the first round but then won’t chamber the second round. After re racking the second round it runs flawless. Any ideas?

@volquartsencustom Год назад

it'd be best to shoot us a message at tech@volquartsen.com - thanks!

@reelfishing002 2 года назад

Definitely have to send this in, too many tiny parts 😁

@richb2229 Год назад

Getting all of those tiny parts to stay in place while putting the pins through them was a challenge but it made a world of difference.

@MarioGomez-sw1cz Год назад

I am a new Mark IV owner and heard of the trigger up grade. Where can I buy the upgrade kit and is there a kit #number?? Thanks

@volquartsencustom Год назад

Accurizing Kit with the black trigger is VC4AK - you can order direct from our website. It may also be in stock via dealers such as Optics Planet or Brownells.

@therealfrananon 2 месяца назад

There are two spacers included in the kit: one for the 22/45 and one for the standard mark iv.... which goes to the 22/45 and which to the standard???

@volquartsencustom 2 месяца назад

Start with the thinner spacer first, if there appears to be extra room you can use the thicker spacer.

@broadedago 2 года назад

I am struggling putting the sear in. The spacer keeps falling out and I don't have a third hand to push it against the spring. It's really a tight fit there. Any suggestions?

@jondeitch7884 2 года назад

Throw the sear spacer away if you don't have the 22/45

@lindamccabe2302 Год назад

Put a dab of Vaseline on it , also on safety detent and spring , did this a hundred times , at least !

@jordanr205 2 года назад

I have a 22/45 Mark lV I don’t have a spacer for the sear.

@clintchapman4319 3 года назад

I could not get that washer installed when installing the sear... I guess that's why there's a 3d video during that part of the video? I spent hours trying to get that thing in there, and when I looked around at other videos nobody used that washer/spacer. What's up with that?

@smurfkilla369 3 года назад

This is happening to me right now. I’m going to skip it too for now

@smurfkilla369 3 года назад

Did it work? Any issues?

@clintchapman4319 3 года назад

@@smurfkilla369 I actually haven't been shooting with it since I installed it. I think it's going to be fine though. We'll see!

@tiffanyprice862 3 года назад

The spacer is not used on a Mark IV only on a 22/45.

@clintchapman4319 3 года назад

@@tiffanyprice862 Thanks! I feel a little better now!

@carbonfibercrypto2919 6 месяцев назад

I successfully installed the trigger shoe, but now nothing happens when I pull the trigger. Now I have a Mark IV paper weight.

@jwalik6064 3 года назад

barrel will not assemble now? trigger appears to be functioning. any suggestions

@volquartsencustom 3 года назад

The upper is not latching to the frame?

@TwisterDoesGaming 2 года назад

My hammer drops as soon as the safety lever is disengaged. What did I do wrong?

@donquidang 2 года назад

Same. I put it back to original, and id doesnt do it at all. Ever found out why?

@AINUARKR Год назад

@@donquidang I had the same thing happening. Realized I put the sear in the wrong way, and perhaps the sear spring, too. The sear is supposed to be pushed back by the sear spring. Found another video which shows it more clearly and how to assess whether you've installed it the right way. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YB9EmYwDyzg.html

@jaseking6560 29 дней назад

@volquartsencustom you need to watch a sigguy video on installing parts, he gives important tips through the video, you need to tell people to make sure the sear spring doesnt just face down, that it actually goes back behind the mag cavity, magwell. i put it all together and almost bent the spring as it was in the magwell. also explain to use the black spacer during the sear install and explain the actual size difference to use for a 22/45 and a mk iv spacer. here are the sizes below as you are your to lazy to do a proper video and include these very important tips. MKIV: 0.0475" (1.20mm) 22/45: 0.070" (1.79mm) black space for sear.

@baxrok2. Год назад

Not a single drop of lubrication?

@diemos322jones9 Год назад

Piece of cake. Way better than trying to put the gun back together with the ruger factory parts! That's not a fun job. I was able to install this kit in under 10 minutes. Because of the 2 times I took the gun completely apart.

@booleeser 3 года назад

Followed the video exactly and installed in my mkiv 22/45 and it will no longer cock, so the safety won't engage, so I can no longer disassemble it.

@cakeeee4 3 года назад

You didn't get the dumb little free floating thing on the hammer in that silver looking hole. Overlooked step by them

@garyshepard7881 3 года назад

@@cakeeee4 Dude, why so technical?! ;-)

@marke3623 3 года назад

@@garyshepard7881 😂

@frankbrowning328 2 года назад

How much does Volquartsen charge to install the parts?

@volquartsencustom 2 года назад

$100 (plus shipping)

@frankbrowning328 2 года назад

@@volquartsencustom Thank you for your help

@Atc350xx 10 месяцев назад

Right side safty screw stripped with little pressure...cannot get it removed.

@volquartsencustom 10 месяцев назад

reach out to us at tech[at]volquartsen.com - we may be able to help there

@karnkraftverk 2 года назад

Not a chance I will be doing this myself 🙃

@volquartsencustom 2 года назад

We can definitely take care of the installation for you!

@leonardpearlman4017 6 месяцев назад

@@volquartsencustom This is definitely the best news I've had lately. It looks like this will make the MK IV into the thing we thought it was in the first place! And if it does, won't that be a treat?

@epps1217 2 года назад

Is this kit drop safe?

@BenRivered Год назад

Are yall still doing installs?

@volquartsencustom Год назад

yes we are - click "Parts" and then "Services" on our website!

@Panzerelch Месяц назад

Please be more clear on what is used on the standard or 22/45.

@xMNxGutz 5 месяцев назад

Is it ok to fry fire with this trigger?

@volquartsencustom 5 месяцев назад

The concern around dry fire is primarily the firing pin peening from striking the chamber - this kit would be all internal trigger components. Ruger mentions it's ok to dry fire their pistols, but we'd still recommend a snap cap if it's more than occasional.

@aceprater5397 3 года назад

Ohh jeezuz... I just threw everything against the wall because of the stupid spacer that is NOT USED in mk IV - WTF bros get your videos together...That ONE little tidbit would have saved 2 hours of frustration. thanks..

@BadBrad46 8 месяцев назад

He DID cover that.

@gabrielthomas8098 2 года назад

“It’s really not that complicated, but I’m not actually going to do it, here’s an oversimplified CGI video”

@volquartsencustom 2 года назад

That's due to the difficulty of being able to capture the process on camera while being able to see what's going on with the internal components at the same time.

@cwo9930 2 года назад

Using animations installing the sear spring instead of actual footage is mis leading. Need to show it actually being done.

@BeechSportBill 4 месяца назад

The 22/45 Light is ILLEGAL in Washington State because of the threaded barrel

@showdownbrown6355 8 месяцев назад

Need to make it clearer that the 22/45 is the only one that needs a sear spacer.

@Confederate-hj2dc Год назад

3D is good but they completely screw up when they don’t tell you which spacers to put in small or big

@youngyeller 2 года назад

hello all, going to put this in a mark4 22/45 lite. which waser/spacer do i use? thanks for any comments.

@EnricoSWE 2 года назад

The smaller one

@youngyeller 2 года назад

@@EnricoSWE thank you. i installed it with the small one. what a trigger improvement. shoots easy. to all who might want one,get one...

@TheMillieSmalls 2 года назад

Bro, I’m not trying this myself. No way. That’s what you pay a gunsmith for

@marktwo3160 2 года назад

You can't find a real gunsmith anymore. The so called gunsmith at the local shops will F IT UP worse then u doing it. Just take ur time and have several laptops and I pads going and u will get it. Yes it is challenging but u will have a nice sense of accomplishment when it all clicks together. Then u will start to tackle other projects on other type guns. Fun stuff.

@scottc543 Год назад

@@marktwo3160 This ↑

@moudavis5830 3 года назад

What really sucks I cannot purchase a Ruger Mark IV, I live in California

@gholmes5404 3 года назад

You might consider moving to a free state. Heard a rumor: If the Republicans take back the White House and Congress, “the wall” could continue up the east side of California 🤷🏼‍♂️

@Sunbear415 9 месяцев назад

@@gholmes5404 Funny, since California is very red, except for four stinking libtard cities.

@iamtheman9647 8 месяцев назад

You can now lol

@jondeitch7884 2 года назад

Why the dramatic music.

@brucemoore4092 3 года назад

I will never understand how you can say this is a simple modification ???? If it is not reinstalled properly, this is a dangerous upgrade for a rookie !!!!!!

@badcrcz 3 года назад

If you're used to taking guns apart more than for simple cleaning this isn't that bad. I just bought a mkiv 22/45 and I've had it 2 hours and installed this kit following the video. Granted the MKIV is a pain to re-assemble at a couple points, like the safety and sear pin but it's not that difficult. They left out quite a few little details in the video that I managed to figure out but I can see that being confusing for some. Like where exactly the sear spring goes, which spacer for which model, and where the hammer rod sits.

@TheFloridaBikeVlogger 4 месяца назад

so if I do it myself, I will save myself 105?$

@volquartsencustom 4 месяца назад

Installation service is an additional 105 on top of the MSRP of the kit and is optional yes.

@itcheballs2225 3 года назад

NOT For Me...

@tj450016263 Год назад

Made it to the sear and got stuck. Would prefer an actual demonstration over 3d.

@mathieubaker1548 Год назад

So how much yall charge to install this trigger?? 😂 lol

@volquartsencustom Год назад

103 - On our website head to Parts, scroll down to Services for details!

@brucewood7865 Год назад

Installation of which spacers to use was as clear as mud. 😤

@brucewood7865 Год назад

Well I finished the install despite the installation video. Very nice trigger pull.

@ronkane9401 Год назад

Do NOT base your installation completely on the illustrations of this video. You might be turned around by the depiction of a rivet head or the use of a spacer. One should also refer to the Volquartsen still photos and captions to figure out the sear and hammer installation.

@tinavictory6912 2 года назад

Is the sear suppose to be forward while installing hammer? This video is not a novice video.😡

@youngyeller 2 года назад

probably too late to respond, yes the sear needs to be foreward .the safety has a notch to hold it while you put the hammer in and install the safety pin through.