ACER PREDATOR HELIOS 300 2019 UPGRADE | REPASTING | CLEANING GUIDE & BENCHMARK

Подписаться 8 тыс.

Просмотров 106 тыс.

50% 1

This video is about repasting and storage upgrade guide for the ACER PREDATOR HELIOS 300 (model no - ph317-53-73bn).
SYSTEM SPECIFICATIONS:-
I7 9750-H
RTX 2060 (overclockable)
2 x 8GB DDR4 RAM
256gb m.2 ssd
1tb hdd
17" 144hz full HD IPS display (3ms response time)
All tests were performed with TURBO MODE ON and a room temperature of 24 degrees Celsius.
PRODUCT LINKS:-
Samsung 970 EVO PLUS 1TB - (IN) amzn.to/3EV2Lxf / (WW) amzn.to/3HU4sNj
Thermal Grizzly Kryonaut - (IN) amzn.to/3AGQ5Ya / (WW) amzn.to/3WAywSl
ADWITS Thermal Pads - (IN) amzn.to/3gAyUB2 / (WW) amzn.to/3v77d6e
Isopropyl Alcohol - (IN) amzn.to/3gsbwWl / (WW) amzn.to/3jowqXz
Screwdriver Set - (IN) amzn.to/3Xwj4Yu / (WW) amzn.to/3WBThwV
* (IN) - Amazon INDIA / (WW) Worldwide Amazon.com*
IMPORTANT DISCLAIMER
Disassembly of laptop voids warranty. TRY AT YOUR OWN RISK.
FOLLOW ME ON:-
INSTAGRAM: / mandrax_yt
FACEBOOK: / mandrax-102452385083122
Don't forget to SUBSCRIBE and STAY TUNED 😉
#acerpredator #helios300upgrade #helios300repasting #helios300cleaning #helios300upgradeguide #laptopupgrade #laptopupgradeguide #howto #DIY #SSDupgrade #samsung970evoplus #samsungevo #samsungevoplus #acerpredatorhelios #thermalgrizzly #kryonaut #thermalpads #benchmark

Хобби

Опубликовано:

17 апр 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1 тыс.

@MVNDRVX 3 года назад

SUBSCRIBE NOW! for more content and support the channel. It costs nothing 🙂✌️

@dankhalilbantuas582 3 года назад

hello i would just like to ask, i think my fan is not working properly, when i MAX it, the air is very strong in the side panels but both the back is nothing(gpu right side) while the left cpu side is barely a breeze(lower than a whistle air)? is this a problem?

@MVNDRVX 3 года назад

Hey Daniel. Sounds like your rear exhaust fins needs a good cleaning. If the air is strong from the sides and less from the rear, it's most probably blocked. When last did you clean the inside of your laptop?

@laisensei6984 2 года назад

Hey bro, I was going through the tutorial on this video and noticed that I didn't buy any thermal pads. I was wondering if I can just use the thermal paste (kryonaut in this case) on the part where you used pads instead.

@MVNDRVX 2 года назад

@@laisensei6984 Hey! I wouldn't recommend doing that. Regular thermal paste are low in viscosity and the gap between the chips and heatsink would not fill. Hence, there would not be any heat transferred, leading to high temps. If your thermal pads are still good, you can still use them and it's not necessary to replace. Or else replace with new one 🙂

@laisensei6984 2 года назад

@@MVNDRVX Well I pretty much skipped the thermal pads part and only put thermal paste on CPU and GPU. There isn't much obvious effect from that though. It only lowered my average temp by several degrees (in fact I'm not even sure if that's caused by the thermal paste or if that's actually due to me cleaning my fans).

@Harsh_69420 Год назад

thank you for the tutorial man, i cleaned and repasted my predator 300 using your method, saved me a lot of money buying all the things rather then giving it for servicing, keep it up

@MVNDRVX Год назад

You're welcome! Thank you.

@emeraldknight22 2 года назад

This is great. I've been wanting to repaste my laptop (same model) for a while now, and this is a great reference for that!

@MVNDRVX 2 года назад

Thank you! That's great.... Good luck with repasting 😃🤞🏻 Do Subscribe to show some love & support 🙂✌🏻❤️

@matjazmiljan4821 9 месяцев назад

Perfect tutorial. Now I am good for another 3 years

@rawzy5282 10 месяцев назад

The only vid I could find where the fans got cleaned. Thanks brother! You got my 👍

@MVNDRVX 10 месяцев назад

Thank you Brother!

@dr_ricksenberg 3 года назад

Hey man! Really nice job on the video. I was able to repaste my Predator Helios 300 2019 version (1660ti, 15.6in one) by using your video as a reference! Used exactly the same paste and pads as you. Once again, thanks for such a nice DIY video!

@MVNDRVX 3 года назад

You're welcome man✌ I'm glad the video helped you. Thanks for watching 🙂 Do LIKE and SUBSCRIBE. I'd appreciate that 🙂

@gauravsukhadeve3657 3 года назад

What about the performance and temperature before and after thermal repaste?

@MVNDRVX 3 года назад

@@gauravsukhadeve3657 it's all there at the end of the video 🙂 Hope you liked the video. Do LIKE & SUBSCRIBE to support the channel 🙂✌

@MVNDRVX 2 года назад

I used the pea drop method and the difference in temp is around 10 degrees 🙂 Good luck 🤞🏻 Do Subscribe to the channel to show some love & support 🙂✌🏻❤️

@MVNDRVX 2 года назад

@Swastik any method is fine. Just make sure it's sufficient 🙂

@recksonkhiangte1488 3 года назад

Didn't know you could open the fan unit like that. Gotta clean out my fans tomorrow. It was starting to make noise in higher rpms. 👍👍👍👍

@MVNDRVX 3 года назад

Thanks for watching. Glad you got to learn something new. You should open the fans and clean them since most of the dust will be stuck at the exhaust fins, which blocks the hot air from blowing out therefore causing thermal issues. Make sure you repaste the CPU and GPU with a good quality paste in case you're planning to dismantle the fan unit or else air bubbles might form in the thermal paste when placing the heatsink back. If you liked the video, click on the LIKE button and subscribe for more content 🙂✌️

@mahdimayo7051 2 года назад

@@MVNDRVX i repaste my laptop like 3 months ago unfortunately i forgot to clean the fan. Is it fine to repaste it again?

@MVNDRVX 2 года назад

Yes.. it's completely fine to repaste it again 😃

@ChandusainathPadala 3 года назад

Thanks for video. I took your video as reference for my 1660ti model and it solved my laptop's overheating

@MVNDRVX 3 года назад

You're welcome 🙂 I'm glad it was helpful. Do drop a LIKE & SUB to support the channel 🙂✌

@sherifrayan 3 года назад

in spite of your amazing video of showing us how to clean each single unit... the songs in the background is FANTASTIC !!!

@MVNDRVX 3 года назад

@Sherif Soliman Thank you! I'm glad you like the video 🙂 Do SUBSCRIBE to show some support. I'd really appreciate it 😀

@sherifrayan 3 года назад

@@MVNDRVX Done Bro

@MVNDRVX 3 года назад

@@sherifrayan Thanks bro. Appreciate it 🙂✌️

@stephanieralte6386 3 года назад

Your channel deserve a hit

@MVNDRVX 3 года назад

Thank you 😁 keep supporting and see it come true 😊

@GhostDevilGamer 3 года назад

You did it carefully and perfectly with lot of patience bro unlike some goons out there, I was wondering for perfect use of thermal pads as what thikness should be used where and all but you solved that confusion too bro Thanks and take care bro, I am about to paste my GPU and CPU this weekend, wish me luck bro.

@MVNDRVX 3 года назад

Thank you so much. Since this was my first tutorial video, it means a lot to me 🙂 I'm glad my video was helpful and educational 🙂 I wish you all the very best. Do let me know the results and if in case you have any doubts, feel free to ask me. If you liked the video, do click on the LIKE button and SUBSCRIBE for more content 😉✌

@GhostDevilGamer 3 года назад

@@MVNDRVX sure bro will share the results as I am going to use cooler master mastergel maker instead of what you used and remaining stuff is same in my case.

@reubenfernandes5003 3 года назад

@@GhostDevilGamer Bro did the thermal pads help you ?

@GhostDevilGamer 3 года назад

@@reubenfernandes5003 yes it did GPU temps were touching 91-93°C before and after repasting/thermal pads application it is at 74°C on 100% load and CPU was at 93-95°C now it is at 80-83°C, For GPU it is arround 19°C drop and for CPU it is approximately 10-12°C drop which is significant I would say and keep in mind I don't have AC in my room and room temperature was 25-28°C.

@blur7027 2 года назад

Was watching this at the gym for a reference on what I'll need to do. Forgot I was watching and just zoned out to the music haha nice tunes

@MVNDRVX 2 года назад

Haha 😆 Thank you ☺️ If you found the video helpful, do Subscribe to show some love & support 🙂✌🏻❤️

@seunglee2307 Год назад

Verh helpful video. It was first time i ever opened my laptop, but its step by step guide definitely made it simple!

@MVNDRVX Год назад

Thank you 🙂💜

@cliftonmiller7967 2 года назад

This was extremely useful to me. Thank you in particular for specifying the thickness of the thermal pads at 7:30

@MVNDRVX 2 года назад

You're welcome. I'm glad the video was helpful 🙂 Do subscribe to the channel to show some love & support 😊❤️

@AniMemories0 Год назад

I didnt catch it, what is the right thickness? I put 7:30 and didnt hear he specifying

@SincAbsence1 Год назад

Same here, anyone know the thickness?

@MVNDRVX Год назад

0.5mm for vram memory and 1mm for everything else.

@savindumarapana6634 Год назад

@@MVNDRVX is it ok to use 1mm for vram too?

@178grace 3 года назад

so satisfying to watch!.. a couple of days ago my gpu fan almost failed and I opened it up for cleaning (obv not as thoroughly as you, I'm kinda scared to open it up completely on my own), however it barely moves even when i try to rotate it manually.. I'd hope it didn't need replacing, as it's practically impossible for me to get new parts in the country where I live :'(

@MVNDRVX 3 года назад

You should clean it thoroughly. It's not that hard. You'd be surprised by how much of dust could accumulate on the fan blades. I'm glad you liked the video. Do SUBSCRIBE to the channel to show some love and support 🙂✌

@samyak4175 2 года назад

@@MVNDRVX true, I cleaned my acer predator Triton 300 yesterday by taking a reference from your video(because I was too scared to open it without any advice. I watched your video till the end and finally gained some confidence) and you wouldn't believe that how dirty the fans and exhaust were, there was literally a layer of dust between exhaust and fan. The thermal paste and pads are also goners but I haven't changed them yet. People should really just have confidence and clean their laptops if they really value them.

@MVNDRVX 2 года назад

@@samyak4175 I'm glad the video was helpful. You should repaste if you removed the heatsink because air bubbles could form cause thermal issues. Hope your thermals are normal 😃 Do subscribe to show some love & support 🙂✌🏻❤️

@meeetptl 2 года назад

U can try synthetic oil ,,, open the fan and apply it in hole and center tip, use "small drop" , it worked for me .. my GPU fan is working as new 👌🏾

@MVNDRVX 2 года назад

@@meeetptl thank you for your suggestion 🙂👍🏻

@rafaelbento2011 Год назад

Great tutorial. I did it without any difficulty. Thank you.

@MVNDRVX Год назад

That's great! You're welcome 😃👍🏻

@gamingworld1609 3 года назад

Great Video man. After seeing so many videos finally !!

@MVNDRVX 3 года назад

I'm glad you liked the video. Do SUBSCRIBE to support the channel 😊

@hufsus Год назад

Great tutorial, thanks for taking us through it step by step. Did you by any chance see whether there's any difference to the CPU and GPU temps when you undervolt your machine or reduce your maximum processor power to less than 50pc?

@MVNDRVX Год назад

Thank you 🙂 I have undervolted, reduced processor power, etc. It does help with thermals a little bit but takes a hit on performance. What's the point if you can't squeeze every juice out of the machine. Right? Lol

@Old_Klepto_Nite Год назад

If you're struggling with high power usage and high temps, simply change the maximum state to 90%. The hit to performance is negligible but helps limit the CPU overperforming

@djmalic3 Год назад

@@Old_Klepto_Nite how to do this ??

@vignesh_waran Год назад

Hi bro great job 👍 In your description you mentioned the thermal pad which consists of 20X67X0.5mm X3, 20X67X1.0mm X3, 20X67X1.5mm X3, Are these many pads required or less than this is enough. If you could remember please tell me how much thermal pad required in both area and thickness of it?

@MVNDRVX Год назад

Thank you. Atleast 2 strips of 0.5mm and 1mm.

@krishan4048 Год назад

Hey! Did you repaste your laptop? If so what temperatures do you get after repasting? I'm planning on repasting my Helios 300 2019. It starts to thermal throttle at 85°c and can't play games for more than 10 mins.

@emmanuelhumphrey3701 Год назад

ULTIMATE MAINTENANCE ! KEEP UP THE GUD WORK ! 👌 👍

@MVNDRVX Год назад

Thank you 😉 Happy New Year

@akshaypokle4397 3 года назад

Was just playing Scavengers on my 15 inches Helios 300 2019 and the CPU temperatures were like 90-92. As our CPU is already undervolted would I think repasting is the last option! Thanks for the video mate

@iago5052 3 года назад

nah man it do be like that not unless you are living in cold climate but if you’re in tropical countries, its inevitable. Also have the same unit and im in ph thats why i hit 90+ the solution i did is downclock my cpu from 4.0ghz to 3.2 ghz doesnt really have impact on performance but has significant reduction in temps. also i tried playing in cold rooms and i noticed that i have really low temps even on high settings and overclocked. Its ur ambient temp that you should be blaming really. You would know when to repaste is when you’re hitting high temps even on idle.

@MVNDRVX 2 года назад

At those temps, repasting would be the best thing you could do to save your laptop. High temps kill your laptop sooner. Sorry for the late reply 🙂✌

@MVNDRVX 2 года назад

@lago try to play a CPU intensive game and stream at 1080p at the same time. I'm sure your game and stream is going to get laggy at that clock speed 🙂

@SmoothRecoil Год назад

Stopping by to show some love

@iconxmath8830 3 года назад

This video reassured me about what to expect !! Thanks to you !! Very good video !!

@MVNDRVX 3 года назад

You're welcome! Thanks for watching. I'm glad you like the video 🙂

@iconxmath8830 3 года назад

Hi@@MVNDRVX, could you enlighten me a bit please? I see you used KRYONAUT thermal paste. Are you satisfied with it? No corrosion problems with this paste? Have you seen a clear improvement with CPU and GPU temperatures before and after change? Thank you for your answers.

@MVNDRVX 3 года назад

@@iconxmath8830 Hi. There are drops in temperature but there's a limit. You can't expect much from a laptop. If you want more better thermals, then i would suggest you go for liquid metal. Keep in mind, the procedure for applying liquid metal is a little different from applying regular thermal paste. It's not worth the hassle, I'd recommend you stick with kryonaut 🙂

@sandpitturtle 9 месяцев назад

Thanks a lot! My fans were completly clogged and the factory paste and pads were quite dried up! Could manage to reduce my temperature while gaming starfield from 92°C with turbo to 82°C with normal fan speed! Holy Cow :)

@MVNDRVX 9 месяцев назад

You're welcome! Hope that deserves a subscribe 🙂

@BarkyTron 2 года назад

thanks for the thickness of the thermal pads thats all i needed to know

@MVNDRVX 2 года назад

you're welcome 🤗 Do subscribe to the channel to show some love & support 🙂

@BarkyTron 2 года назад

@@MVNDRVX my gpu isn't working after I did this any tips on how to fix?

@MVNDRVX 2 года назад

@@BarkyTron Sure I can try my best to help you out. I see you've commented in two places, so I'll just reply under the other one cause it's easy to find incase anybody else has the same issue 🙂

@alejandrovillegas5110 2 года назад

It worked great for me! thanks for the video :)

@MVNDRVX 2 года назад

I'm glad! 😃 You're welcome and thank you for the subscribe 🙂

@aryamansadal4826 3 года назад

Thanks bro .....Your video really helped ...... I was scared ....but still did it

@MVNDRVX 3 года назад

I'm glad the video was helpful man🙂 Thanks for watching. Do support the channel by clicking LIKE and SUBSCRIBE. I'd really appreciate that 😉✌

@CassiniFPV 2 года назад

Very Nice an Clean work Dude!!

@MVNDRVX 2 года назад

Thank you so much 🙂 Do SUBSCRIBE to show some love & support 🙂✌🏻❤️

@kagevil3893 3 года назад

Thank you, great video mate

@MVNDRVX 3 года назад

You're welcome 🙂 Thank you for watching. I'm glad you liked the video. Do click on the LIKE button and SUBSCRIBE for more content 😉✌

@DiptangsuGoswami 3 года назад

actually a really really nice video

@MVNDRVX 3 года назад

THANK YOU 🙂 I'm glad you liked it.

@n.balgopalpatro6241 3 года назад

Great Video.. Learned something new today..

@MVNDRVX 3 года назад

Thank you. I'm glad to hear that. Do SUBSCRIBE to show some support 🙂✌

@jmplaylistrun5974 2 года назад

Awesome job. TY for sharing.

@MVNDRVX 2 года назад

Thank you 🙂

@ZMihran 9 месяцев назад

Great !! THX

@dishantsingh1521 3 года назад

oh bhai op 🔥🔥🎉

@MVNDRVX 3 года назад

Thank you 🙂

@em.y.sam. 2 года назад

A lot of work 👍💯

@MVNDRVX 2 года назад

Kinda 😅 Hope you liked the video. Do SUBSCRIBE to the channel to show some love & support 🙂✌

@mrunkwn-km5le Год назад

You are a big help for me.

@MVNDRVX Год назад

Now does that deserve a subscribe? 😋

@mrunkwn-km5le Год назад

@@MVNDRVX Yup definitely, I would like to know about the thermal paste, do I have to Spent 1k for a paste buying all these tools Cost almst 2k.

@MVNDRVX Год назад

@@mrunkwn-km5le yes but it's totally worth it. You can go for other alternatives like cooler master that have the same 12-14w/mk and cheaper also. It will last you atleast 3-4 repastes. Thermal pads replacement are not necessary if it's still in good condition. Screwdriver set will last a long time. That's obvious. Isopropyl alcohol also.

@mrunkwn-km5le Год назад

@@MVNDRVX I was hoping to save money on the pads but last time I repaired in nearby shop (which is Acer authorised but not fully, works on tender) has replaced my pads and Thermal they were not professional compare to the pay which is 1200 , now I recall they used similar thermal paste that were used in normal notepads or old lappy, the temperature problem was not solved but I shrunk my uses to light since I didn't have time to travel far to repair it. I will do it myself now. Btw how many times can I use the thermal paste and pads given that it is only 1gm.

@MVNDRVX Год назад

@@mrunkwn-km5le you can use a 1gm thermal paste for 2 repastes. Should last you a minimum of 3 years. Thermal pads should be 1 or 2 times use depending on how you manage the sizes. I haven't changed my thermal pads since the last time but I will have to repaste the CPU and GPU though.

@johnnymaynard299 3 года назад

Great video thanks for the info ..

@MVNDRVX 3 года назад

You're welcome 🙂 Glad you liked the video. Thank you for dropping a sub 🙂✌️

@feroz576 9 месяцев назад

Nice bro ❤

@MVNDRVX 9 месяцев назад

Thanks!

@djmalic3 Год назад

Excellent video! Got mine in 2019 also, think it’s due lol… just been scared to mess it up, going to order parts and try soon !

@MVNDRVX Год назад

Thank you! All the best. Product links are in the description, if possible do order from the links to show some support.

@magamagaaa 8 месяцев назад

Ive just ordered thermal paste and the pads, will be coming back to this video in 7 days time. So nervous trying this for the first time.

@MVNDRVX 8 месяцев назад

Hope you don't break anything. Just kidding 😂 Good luck 🙂👍🏻

@magamagaaa 8 месяцев назад

@@MVNDRVX Is 1g tube enough for only an CPU or GPU repaste?

@MVNDRVX 8 месяцев назад

@@magamagaaa Yes. In fact you can repaste both twice with an 1g tube.

@magamagaaa 4 месяца назад

Finally worked up the courage to repaste, just wanna thank you my guy for an incredible video guide. Its even more impressive that this was your first tech video you uploaded Hope you have an wonderful day

@thealphaflight2121 2 года назад

Mandrax your amazing 👏 your very skilled I learned something new. Great detailed video..Thank you brother 👍 AAA+++++

@MVNDRVX 2 года назад

@thealplhaflight2121 thank you so much 😊 I'm glad I was able to help. Do drop by the live stream sometime 🤗❤️

@Nothing-yi9gm 3 года назад

You have my sub my guy

@MVNDRVX 3 года назад

Thank you 🙂

@lolofilmo7582 Год назад

Sending my love and support 👍

@consultantrregz Год назад

new subscriber here idol ❤ very nice review ever 😊

@tindustries 3 года назад

I have this laptop :). Very nice laptop

@MVNDRVX 3 года назад

Awesome! Yes it is a nice laptop. No doubt about that 😃 Do SUBSCRIBE to the channel 🙂✌

@dayangskitchen2756 2 года назад

Nice my friend

@Khmerlaptoprepair Год назад

good brother

@MVNDRVX Год назад

Thank you 💜

@buhayrelocationsitesvlog5040 Год назад

hello my new friend thanks for sharing and take care of yourself and God bless you

@MVNDRVX Год назад

Thank you! God bless you too 💜

@annoyed-intern 2 года назад

Hmm. Just finished up repasting. Thanks a lot. GPU seems to have dropped 10degree during gaming. But CPU is more or less the same close to 90c. perhaps now it's overclocking more.

@MVNDRVX 2 года назад

That sounds great! 😃 CPU temp seems to be fine since you're overclocking it 🙂 Glad this video was helpful. Do subscribe to the channel to show some love and support 🙂❤

@naecatalin2637 2 года назад

Have same laptop will do the same !

@MVNDRVX 2 года назад

That's great! 😃 Do subscribe if you like the video! Will appreciate it 🙂✌🏻❤️

@marcelosorde7972 7 месяцев назад

Thank's a lot i did exactly what u did following ur video and my temps went from peaks of 94 degress playing even CS2 to 65 degress 70 degress at peak! Of course in conjunction with throttlestop and undervolt. Used artic mx-4 paste and thermal pads of 0.5mm for vram and 1mm for the rest. Regards. Ps. Let's see now how long it will be efficient since once i repaste with collermaster paste and it only worked a few days but in that occasion i did not changed the thermal pads.

@MVNDRVX 7 месяцев назад

You're welcome. Mine was good for more than a year with heavy usage of 8+ hours a day of gaming and streaming without undervolting.

@7kei517 14 дней назад

@@MVNDRVX may I ask, where is the vram located in the motherboard?

@MVNDRVX 14 дней назад

@@7kei517 the chips surrounding the GPU are the vram with pre-applied pink paste.

@sgindiegamersupportid8521 Год назад

Hi my friend, I'm back to your channel again to watch lovely upload. Keep such great content coming. Waiting for next one my friend. Have a great Tuesday and stay connected - SG Indie Gamer.

@ChuKhoySheng 3 года назад

This is amazing! 🔥 I have few questions, I definitely am gonna ask you later.

@MVNDRVX 3 года назад

Thank you 😊 Sure... Ask me anything

@omega6180 3 года назад

BRILLIANT !!!

@MVNDRVX 3 года назад

Thank you 🙂 Glad you liked the video and hoping you subbed to my channel 😊✌

@omega6180 3 года назад

@@MVNDRVX Done 👍

@omega6180 3 года назад

@@MVNDRVX what thermal pads size will be good for helios 300 (2019) 15.6" model ?

@MVNDRVX 3 года назад

@@omega6180 Same... As shown in the video... 1mm everywhere except for vram memory chips which will be 0.5mm

@omega6180 3 года назад

@@MVNDRVX Thank you.

@redwood1394 2 года назад

I would like to see the tests in games at the maximum settings, what kind of heating will the processor be?

@anshuldwivedi1919 11 месяцев назад

I cleaned mine 10 days back and everything was fine till today. Since noon today the right fan has been making loud noise as if it's hitting on something while rotating

@MVNDRVX 11 месяцев назад

You must've bent the metal blades while cleaning it.

@mikeg-eo3of 2 года назад

Really helpful video! Anyways are the VRMS the ones with pink paste? I dont know much about the internals of laptops.

@MVNDRVX 2 года назад

I'm glad you find the video helpful 😊 Yes, that's correct. vrams are the ones with the pink paste. Do drop a sub to show some love & support. I'd really appreciate it 🙂❤

@bobac1083 Год назад

I would never let mine get this bad. I open it up every 6 months to give it a good cleaning even if it doesnt need it.

@MVNDRVX Год назад

Great! This was after 6 months of getting my laptop. I live on a main street. So, all depends on how dusty your surrounding is.

@Suckmyring 2 года назад

Does the dram actually benefit from the thermal pads? I understand the cpu and gpu probably get better temps but what about the system itself? Are the .5 mm pads you used superior to that pink paste?

@MVNDRVX 2 года назад

Memory chips do produce certain amount of heat but not as much as the CPU & GPU itself. So most of the system heat comes from the CPU & GPU. I feel the pink paste is just an overkill and regular 0.5mm pads works just fine. Been using them for over a year now with heavy gaming and streaming, no issues until now 😉 If you feel the video or I have been helpful, do subscribe to show some love & support 😊✌🏻❤️

@celsohenrique2481 2 года назад

Friend, I can use all 1mm .... Very good JOB

@MVNDRVX 2 года назад

Thank you ☺️ You can but if you want to be precise, use 0.5mm for VRAM memory chips. 1mm will have too much heat resistance 🙂

@wanteich 2 года назад

Hi, I have a Predator Helios 300 PH 317-53, I wanted to add a SATA 3 SSD to it, but when I disassembled it, I did not find a connection loop there, and a vibration-isolating elastic band. Tell me, what model of SSD connection loop should I buy?

@MVNDRVX 2 года назад

Hi! Your only choice would be to remove your HDD and replace the slot with the SSD. There are no additional slots but you can add a m.2 SSD since there are 2 slots. Hope this helped. Do subscribe to the channel to show some love & support 🙂❤️

@RRReviews10X 2 года назад

I'm going to be doing this soon, but instead of the pads, i bought a special thicker thermal paste instead

@MVNDRVX 2 года назад

That's great! Good luck 😃🤞🏻 Do SUBSCRIBE to show some love & support 😊❤️

@mohammedabdo4096 Год назад

Can link of that special thermal?

@TheGubasza 2 месяца назад

🤟

@MVNDRVX 2 месяца назад

🤘🏻🤪🤘🏻

@dopeshope4976 2 месяца назад

Hey man, are these thermal pads good enough or should I get the thermal grizzly minus 8 ones or the gelid ones? Those seem to be lot more expensive tho

@MVNDRVX 2 месяца назад

The pads I've used does the job.

@troi8627 2 года назад

hello, thanks to you cleaning my laptop for the first time in two years was successful. i have a question though, do i need to replace the tapes on the fan because it no longer sticks and i had it removed. if yes, can you suggest what tape should i buy?

@MVNDRVX 2 года назад

Hey! You're welcome. I'm so glad everything went well for you. The tape is really not that necessary. Nothing to worry about 🙂 Do SUBSCRIBE to the channel to show some love and support. I'd really appreciate it 😊✌

@Aaron6791ae 2 года назад

I was searching for the answer to the same question, but it looks like its called Black Insulating Acetate Cloth Adhesive Tape for Laptop, but I have seen other people retape it with regular tape not sure if regular tape would hope up under heat tho.

@jeissonhernandez228 2 года назад

@@Aaron6791ae I would never risk placing regular tape over components that could potentially get warm. They use the insulating tape for a reason !

@ibrahimelzamzamy1963 4 дня назад

What thickness pad did you use at 24:05 on the heatsink? Thanks

@musicalfever4227 2 года назад

Can I use thermal paste on vram memory instead of 0.5mm thermal pads?

@MVNDRVX 2 года назад

No. I wouldn't suggest doing that since regular thermal paste are low in viscosity. Please use thermal pads 🙂 Hope this helped. Do Subscribe to show some love & support 🙂✌🏻❤️

@user-gc1yf7xm6w 6 месяцев назад

when you did the storage upgrade, did you move that to be the primary storage device or just add a second drive? Mine has a 512gb and I am going to add a 1tb but I am trying to figure out if i need to move my os and everything onto it it by cloning then clearing the 512 or just add it as additional storage.

@MVNDRVX 6 месяцев назад

I just added it to the other empty slot and kept everything else how it was.

@IvanovMarius Год назад

What thickness did you use for the pads? and one piece of 20x120 mm is enough to change all ? I cant find 2 pieces, only one

@MVNDRVX Год назад

0.5mm for the vram memory and 1mm for everything else. You will need atleast 2 strips of each size.

@IvanovMarius Год назад

@@MVNDRVX Ok, thanks!

@filipinaforever2031 Год назад

Hello that nice channel new friend from James Gipe Gipe

@JGMoto Год назад

Hi there. My wifi stopped working after this. I know I plugged the wifi adapter correct. What seems to be the problem?

@MVNDRVX Год назад

Try uninstalling & reinstalling the wifi drivers. Check once more if the adapter is plugged properly. Check if the wires are plugged in their assigned slots. Nothing should go wrong unless you broke something.

@peekberr3887 3 года назад

bro my gpu fan stooped last day its shows 0 rpm in predator sense plz tell me solution and also a question "is gpu and cpu fan are of same size plz let me know i m worried"

@MVNDRVX 3 года назад

Maybe the fan motor is broken and the unit needs to be replaced. CPU & GPU fans are the same size but not the same. GPU fans blades are made of metal, while the CPU fan blades are plastic. Hope that was helpful. Do SUBSCRIBE to the channel to show some support 🙂✌️

@rhamby3470 2 года назад

I stripped a screw really bad so I only replaced a fan. Still played this for the music

@MVNDRVX 2 года назад

that's awesome 😄 Do drop in to live streams and subscribe to show some love & support 😊✌🏻❤️

@reubenfernandes5003 3 года назад

For the vram areas can we use thermal gel instead of pads? The areas which were initially pink

@MVNDRVX 3 года назад

You can but you need to have a thicker viscosity paste. Normal thermal paste will not do the job. Better replace with thermal pads. Hope that was helpful. Do support the channel by dropping a LIKE & SUBSCRIBE 🙂✌

@butew9397 2 года назад

Hello, great vid! I just didn't understand how to plug these two cables of wifi at 26:43. Mine aren't plugging in, I don't know if I should pressure it more or something. Any tips? Thank you!

@MVNDRVX 2 года назад

Hey! Thank you 😃 Maybe you need to put a little more pressure. Just make sure you've aligned them correctly and push them straight down or you could just unscrew the wifi adapter, pull it out and try connecting the wires if that's easier for you 🙂 Do SUBSCRIBE to show some love & support 😊✌🏻❤️

@meeetptl 2 года назад

Should I use these same thermal pads for "2021" version? coz in this version, GPU chips placement aren't same as 2019 .

@MVNDRVX 2 года назад

Yes. Same thermal pads should do just fine. The placement doesn't matter 🙂

@jardinesanchez8475 2 года назад

Hi. just want to ask what thickness of thermal pads are used on this video

@MVNDRVX 2 года назад

0.5mm for the vrams (replacement for pink pads) and 1mm for the rest. Hope this answers you question. Do SUBSCRIBE to the channel to show some love and support 🙂✌🏻❤️

@cemalsumrud8482 3 года назад

Hello how can you activate upper data in warzone that you can see how hot it gets. thanks

@MVNDRVX 3 года назад

There are many softwares but i personally use the MSI afterburner 🙂 Hope that was helpful. Do LIKE and SUBSCRIBE to support the channel 🙂✌

@sebastiankoehns 2 года назад

super man, do you think if i send it to do that in a shop, would do a detail work so professional like your work?

@MVNDRVX 2 года назад

Hey! Thank you so much 🙂 I think so... It would be best if you're present there while they do the job so you can make sure everything is done perfectly. Hope your repasting is done successfully. Do subscribe to the channel to show some love & support 🙂❤

@apollo6592 10 месяцев назад

Hey! I have repasted my laptop, although I didn't change the thermal pads (used kryonaut with the spread method). Every other variables are equal, but my laptop is still running hot (It's running on the same temp as before repasting), what do you think is the cause? Is it because of my thermal pads? (To be fair my thermal pads' conditions are worse than yours lol

@MVNDRVX 10 месяцев назад

Then change them!!!!! Lol😆 Those small chips don't give much heat actually. Most heat come from the CPU & GPU. You wouldn't have applied enough paste. Just use the pea drop method(be generous) and let the heatsink pressure do its thing. Remember, too much is OK but too little will not work. Good luck.

@paidn4ull 2 года назад

What kind of pads did you use? Thickness and what not? Thanks I’ll be using this video as my guide when I repaste and change pads on my predator triton 300 Also, should I use thermal paste AND pads on all the other parts besides cpu/gpu? Or just the pads?

@MVNDRVX 2 года назад

I just used some cheap thermal pads from Amazon based on the reviews. The brand is called adwits. I used 0.5mm in replacement of the stock pink paste and 1mm for the rest of the chips. Not sure about the thickness used for triton 300. Do check on that. Only replace thermal pads if necessary. It's not mandatory because thermal pads last long in most cases and just use thermal pads alone. Only apply paste on pads where you think contact is not made with the heatsink. Hope this helps. Do subscribe to show some love and support 🙂✌️❤️

@paidn4ull 2 года назад

@@MVNDRVX oj ty, thats where im gonna get my pads from, but the I saw 0.5 thickness, along with 1.0, 1.5, 2.0 and so on, o then I was like crap which will fit inside my predator triton lol, but ty this was helpful, how much of a temp drop did you see with the new paste and thermal pads??

@MVNDRVX 2 года назад

@@paidn4ull atleast 10-12 degrees 🙂 My CPU touches 83 and GPU 63 during gaming and streaming 🙂

@turgutcandemir5892 2 года назад

@@paidn4ull i got triton 300 too. Did you make it. What thicness did you use?

@guesswho9453 2 года назад

Great but my unit doesn't have thermal pads on it... should i have to put new ones or its okay to leave it like that....

@MVNDRVX 2 года назад

No thermal pads? You're the second person telling me that... Would you be able to send me a picture on my Instagram? The link will be in the video description 🙂

@user-su8wf8lf7u Год назад

Hello, excellent video! I am about to do maintenance on my notebook, the model is the predator PH315-53-77M4. The only difference is that the video card is rtx 2070. The only question is regarding the thermal pads that you used on the chips and the vram, in case my notebook does not have them and only has thermal paste, it is convenient to put a thermal pad on it. pads where it doesn't have?. I would appreciate your recommendations. Greetings from Argentina.

@MVNDRVX Год назад

You must be having thermal grease on your chips and vram instead of pads. Just like what I had on my vram(pink thick paste). Yes you can use thermal pads instead.

@user-su8wf8lf7u Год назад

@@MVNDRVX Thank you for the prompt response, do you know their name and the exact size of the screws that are from the heatsink? Why is there one that I can't remove and it's rounded a bit, so that when I can remove it, I'll change it for a new one? Any suggestions for removing it?

@MVNDRVX Год назад

@@user-su8wf8lf7u didn't have a different screw in mine. Maybe try buying a full screwdriver set, you should be good to remove it.

@sakuramomo2227 Год назад

Hi my laptop fan has been making a buzzing noise, I’m not sure if I’m supposed to change the thermal paste for it or something else is wrong with it

@MVNDRVX Год назад

The fans have nothing to do with thermal paste. Please check the fans for dust and clean them out. If problems still persist, the fans will need a replacement.

@Stella-ew2jd 3 года назад

Hi, Great video! 👍👍👍 I have favorite your video to reproduce it once I have bought what I'm going to ask you. I have the ACER Predator Helios 300 PH317-54-796D. I will want to change my ram, increase my storage. What models would you advise me in ram 16G, ssd PCI 1T and Sata 2T? Thanks

@MVNDRVX 3 года назад

Hi. I'm glad you liked the video 🙂 For the RAM, you could go with 2x16gb 2666mzh sodimm ddr4 ram. Check Crucial website for more details. Don't go with anything more than 2666mzh. For PCIE M.2 ssd, you could go with the same that I've used Samsung 970 evo plus or even a 980. Even WD black has similar performance. For SATA SSD, you could go with any of your choice. If the budget isn't a problem then, I would suggest the Samsung 870 EVO 2.5" SSD. Hope that answered all your queries. Do SUBSCRIBE to the channel to show some love & support 🙂✌

@catman-hi5cn Год назад

I wish you had explained what you were doing at 26:43. Your hands covered it up, but did you have to solder something, did you screw in something? How do you reconnect the wifi?

@MVNDRVX Год назад

Just press it down like a press type button.

@verenna961 2 года назад

when is ideal to be cleaning a laptop as a routine? I have my ph300 for a year now, and I'm wondering if I should try cleaning it even if I'm kinda scared and when should I try changing it's thermal paste? and about that brush to clean it, which type of brush is ideal so I don't damage my laptop?

@MVNDRVX 2 года назад

Cleaning routine would depend on how dusty your surrounding is. Once in every 6 months to a year should be ideal. If your CPU temps are rising above 90 degrees celcius, then you should consider respasting, even if your laptop is brand new. You can use any soft brush. I've used painting brush for mine. Hope this helps. Do subscribe to show some love & support 😊✌🏻❤️

@verenna961 2 года назад

@@MVNDRVX it helped a lot!!!! thanks for helping me! this video for sure helped a bunch too hope u make it a lot bigger 💕

@MVNDRVX 2 года назад

@@verenna961 you're welcome 😃 and thank you so much for your kind words... means a lot to me 😊✌🏻❤️

@Shakk404 2 года назад

I’ve had mine for almost 2 years now and never opened it up to clean. The fan is very loud now and the other day my game froze up completely and I couldn’t even open task manager. I’m sure it was overheating as the temp fluctuates between 75-90 Celsius when gaming. I know nothing about computers and afraid to open it up. Is this something I could get done at a computer shop?

@MVNDRVX 2 года назад

Yes. You absolutely can. Just make sure you're there physically to double check the work. Most shops I know will just repaste it and will "not" do a good job cleaning the hardware cause it takes time and patience. Hope this helps. Do SUBSCRIBE to show some love & support 🙂❤️

@CantFindNemo 2 года назад

can you apply thermal pastes on those parts instead of thermal pads?

@MVNDRVX 2 года назад

No Sir. Regular thermal paste are low in viscosity, hence they would not make any contact due to bigger gaps between the chips and heatsink. Hope this answered your question. Do subscribe to show some love & support 🙂❤

@kezziekz 2 года назад

Which ones are the VRM chips? The smaller ones? I can't tell the difference which you put 1mm thermal pads or 0.5mm thermal pads. I'll be doing the same thing you're doing.

@MVNDRVX 2 года назад

The Vram chips are the ones that already have pink paste on them. You need to replace that with 0.5mm pads and 1mm for everything else 🙂

@pratikadhikari8218 2 года назад

Hello friend not sure what thermal pad to ise is the thermal grizzly minus 8 pad good for my helios 300 rtx 2060 model 30*30 0.5 mm??

@MVNDRVX 2 года назад

Hey! Yes absolutely you can use minus 8 pads if you're willing to spend so much but it's not necessary 🙂 I'm guessing you live in India and the product link is in the video description, do check it out. You can get 0.5mm and 1mm pads just for ₹499. Hope this helps. Do subscribe to the channel to show some love & support 🙂❤️

@King-uy9yc 3 года назад

hey man i don't know i would want to clean my pc and add new thermal paste but i am a beginner i am like scared if i do something wrong and mess up any tips ? btw nice video

@MVNDRVX 3 года назад

Hi! Just follow the video. Make sure you apply enough thermal paste. Do the spread method if you're not sure about the amount. Be gentle and patient. Just don't break anything. You would do just fine. I was a beginner too once and I didn't find it difficult at all to get the hang of it 🙂 I'm sure you can do it without messing it up. Best of luck 👍 Thank you for watching. I'm glad you liked the video. Do click on the LIKE button and SUBSCRIBE to support the channel 🙂✌️

@dannyvme2704 2 года назад

Great breakdown. Do you play Warzone on this device?!

@MVNDRVX 2 года назад

Thanks bro 🙂 Yea I do play and stream from this laptop but except I'm connected to an external monitor and keyboard 🤪 Planning on upgrading to a desktop PC soon 🤞

@dannyvme2704 2 года назад

@@MVNDRVX Very nice!

@mariossakas8913 7 месяцев назад

gg man. what type of thermal pads you use exactly and how many mm? 1mm? and what thermal paste you suggest me with a same laptop but with a i5 11th gen and a rtx 3060?

@MVNDRVX 7 месяцев назад

The thermal pads link is in the description. Check if it's available in your country. I used 0.5mm for the vram memory and 1mm for everything else. I guess it should be the same for you also but I'd suggest you search on Google and double check 🙂

@mariossakas8913 7 месяцев назад

@@MVNDRVX thank you bro.

@mariossakas8913 7 месяцев назад

@@MVNDRVX one more question, which one is the vram memory?

@MVNDRVX 7 месяцев назад

@@mariossakas8913 the chips around the GPU. If you see in the video, they had pink paste on them.

@yaboizak1210 7 месяцев назад

Can u tell me where did u use what size thermal pads either u didn't mention it or I missed u mentioning it 😅😊

@MVNDRVX 7 месяцев назад

You must've missed it. It's 0.5mm for vram memory and 1mm for everything else.

@redribbonzx7207 Год назад

I have a very similar model, same cpu, I found the Acer Aeroblade is so noisy. I found a replacement on ebay non Aeroblade but compatible size. I pushed out the fan from the fan case centrer pole add white lithium grease, the sound is so much quieter.

@MVNDRVX Год назад

Thanks for the tip 😉👍🏻

@Parad0x_SL 2 года назад

Can the same size pads be used for the 2020 version of this laptop?

@MVNDRVX 2 года назад

Yes absolutely! 🙂 If you think this video has been helpful, do subscribe to show some love & support 😃✌🏻❤️

@yaboizak1210 7 месяцев назад

Can u tell me where did u use what size thermal pads either u didn't mention it or I missed u mentioning it 😅

@MVNDRVX 7 месяцев назад

It's mentioned in the video. 5mm for vram memory and 1mm for everything else.

@phclopes 2 года назад

Thanks for this great video, I have just one question. The thickness of the thermal pads are official? 1mm on everything and 0.5 on the VRAM

@MVNDRVX 2 года назад

You're welcome. Thank you for watching 🙂 If you ask Acer they would suggest 1mm pads on everything. But I've done tons of research and came to a conclusion that 1mm is too thick and would have some thermal resistance. Many people have asked me this question and my suggestion would be to apply thermal pads as shown in the video. Do not apply the thermal paste yet. Fix back the heatsink. Let it rest for a while. Remove the heatsink and check for contacts. If you see contacts on every pad, then you're good to go. If there is no contact on some pads, just apply a little bit of paste on them. Hope this was helpful. Do subscribe to show some love and support 🙂❤

@kezziekz 2 года назад

@@MVNDRVX Thanks mate! I'm going to get Thermalright 1mm and 0.5mm thermal pads and Kryonaut thermal paste!

@MVNDRVX 2 года назад

@@kezziekz you're welcome. Glad I could help 🙂

@JotaFla 2 года назад

@@MVNDRVX Can I apply the same thermal paste of CPU/GPU on the Vram?

@Antonio-rt4yg 2 года назад

@@MVNDRVX are the VRAM chips those in the bottom right, around the GPU chip right?

@michaelarc2792 3 года назад

Hi , please help … I have acer nitro 5 , I applied 1mm thermal pads to the Vram the performance is now weak and the temps is higher too … what should I do ?

@MVNDRVX 3 года назад

Did you reapply the CPU and GPU with fresh thermal paste?

@michaelarc2792 3 года назад

@@MVNDRVX yes repasting with thermal grizzly and applying thermal pads the GPU temp goes up to 78C with very poor performance 50% GPU usage … is there a possibility that the pads are too thick ?

@MVNDRVX 3 года назад

So normally the vram mems don't give out so much heat. I think your thermal paste application was too little or check whether you connected the fans. That's a very common mistake people make 🙂