Klipper uses Input Shaping resonance vibration reduction technology, which allows for high-quality printing at higher speeds and accelerations.
For convenient and simple use of this technology, an acceleration sensor (accelerometer, G-sensor) is required. Klipper supports several sensors, including the ADXL345.
Mellow FLY-adxl345 USB.
ADXL345 USB accelerometer:
inexpensive - s.click.aliexpress.com/e/_DBX...
the same but more expensive - s.click.aliexpress.com/e/_DBQ...
another form is s.click.aliexpress.com/e/_DFo...
Kusba - s.click.aliexpress.com/e/_DF2...
My github is github.com/bootuz-dinamon/end...
Commands used in the video -
~/klippy-env/bin/pip install -v numpy
sudo apt update
sudo apt install python3-numpy python3-matplotlib libatlas-base-dev
ls /dev/serial/by-id/*
~/klipper/scripts/calibrate_shaper.py /tmp/calibration_data_y_*.csv -o /tmp/shaper_calibrate_y.png
~/klipper/scripts/calibrate_shaper.py /tmp/calibration_data_x_*.csv -o /tmp/shaper_calibrate_x.png
Telegram channel - t.me/bootuse
Telegram chat - t.me/bootus_public_chat
Support the channel - www.buymeacoffee.com/bootuz
24 янв 2024