Adding Brakes to All Four Tires! - Off Road WheelChair

Просмотров 580 тыс.

% 14 176

Safety is in our top 5 priorities here on JerryRigEverything, and that Includes adding brakes to both the front AND rear tires at the same time. Stopping power is ALWAYS a good thing. Here is the lever we used: amzn.to/2FGf4Ru it pulls both brake cables at the same time. Let me know if you have any more suggestions!!
With the cable disk brakes working on all four tires, Cambry will be able to stop sooner, and have more traction on slick, or gravel surfaces. Bring on the snow.
Watch the reveal as we give it to Cambry HERE: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-H3_mVryqXpU.html
Watch how we made this bike: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-V6kJOXr3HzA.html
Protecting bike tires against thorns: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-E19_XpeTHv8.html
Off Road WheelChair Climbing a mountain: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ela3bPtookg.html
Check out Cambrys Instagram HERE: cambrykaylor
Let me know if you have any questions in the comments!
Customize your own Tesla Here: ts.la/zack10701
The camera I used to film this video: amzn.to/2p7GtkX
The Lens I used for this video: amzn.to/1QOXDw2
Wide angle lens: amzn.to/2qiYM4u
And this Metabones adapter: amzn.to/2iZ67Ty
This is the drone I use: amzn.to/2joH00G
Music is from HERE: share.epidemicsound.com/pcGGf
*Follow me for updates!*
Instagram: zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: ZacksJerryRig
Snapchat: bit.ly/1UAb2Fq
GooglePlus: bit.ly/1YyKice
TO SEND ME STUFF: See my P.0. Box on my 'About page': ru-vid.com
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

Развлечения

Опубликовано:

27 ноя 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,4 тыс.

@WhatsInside 5 лет назад

Zack never let me say “let’s get started” 😞

@kunalfindley158 5 лет назад

LMFAO. Bruh, I watch your channel all the time man, keep up the good vids

@AliYassinToma 5 лет назад

Cuz u aint a girl bruh

@daksh.sharmaaa 5 лет назад

What's Inside? Check out mu channel and tell me how is it according to a kid

@srengoul860 5 лет назад

SAD

@cularu1 5 лет назад

Want a kiss now?

@YosefB 5 лет назад

It would be safer to have the two front brakes together and the two back brakes together. Less risk of flipping over the front.

@ReN-tw6mb 5 лет назад

Ya, I agree with you on that one.

@CookedPorkchop10 5 лет назад

Just what I was thinking as well

@FFM0594 5 лет назад

No risk if the braking is set up correctly.

@QAnyui 5 лет назад

@@FFM0594 there is. If she gives different pressure on one side, one side will be slower than the other side, which make the wheelchair to slide to the side

@QAnyui 5 лет назад

Yup. Someone explain it better than me.

@whodis113 5 лет назад

So collective ideas from the guys below: 1. marry her 2. separate front brake and rear brake for better braking modulation, especially during downhill descending. 3. from the previous video: tubeless for better puncture-resistant, light-weight, and better mileage 4. Switch from Mechanical disc brake to hydraulic --> better stopping power with less force applied 5. Rear shock-absorber 6. This is just my 2 cent but.... can we do something about reversing? if it's a conventional wheelchair she could easily back up, but since this is a motorized version, it's kinda tricky :-? 7. Reflectors, front n rear, easiest way? slap some reflector tape on it. 8. put a helmet on for her since she's a speed demon lol 9. Parking Brake maybe? 10. Marry her.

@GamingAmbienceLive 5 лет назад

if he doesnt marry her hes just toying with her heart and will be the biggest douchebag on the internet, hes a nice guy, but he is kind of raising this girls hopes up if he has no other plans, unless he has a gf that nobody knows about, or is married, or is gay, he is way too alpha _not_ to marry her otherwise, and should do it, hope she can really have kids

@DeaThlyShaD0w 5 лет назад

@@GamingAmbienceLive In video about idk. Some kind of foundation, she told that she can have kids..

@GamingAmbienceLive 5 лет назад

i know I watched it, i just dont know how true it actually is, maybe its something they told her to keep her hopes up, truth is nobody will know until she tries

@DeaThlyShaD0w 5 лет назад

@@GamingAmbienceLive I don't think that they lied her.. I hope everything's ok..

@DennisCrouse 5 лет назад

All great suggestions, I am very partial to #1, and #10

@TheDudeman523 5 лет назад

I have no words for how much respect I have for you after watching everything you have done for her. Quality of life is everything for someone in a wheelchair. I wish I could have done things like this for the people in my life that spent many years in a chair

@joshnicoll6761 4 года назад

I've been binge watching the electric wheelchair videos with a massive smile on my face. Zach you are one of a kind. And side note you guys are the goals of couples .

@karkiabhishek 5 лет назад

*1.* Why didn't you put the brakes facing downwards? *2.* Use one lever for front brakes and another one for rear brakes.

@ZacksJerryRig 5 лет назад

We wanted the handle bars to be as low as possible. If the brake handles were below the handle bars, they would clip the frame.

@mitchellhuse993 5 лет назад

Abhishek Karki she might have small hands

@karkiabhishek 5 лет назад

@@ZacksJerryRig Oh! Ok. Thank you so much for replying to my comment.😊😁

@rbching3535 5 лет назад

@@ZacksJerryRig you can actually get an inexpensive riser bar, split it into 2 for the left and right and have clearance and a symmetrical setup.

@derekfester6084 5 лет назад

ZacksJerryRig what about on the outside

@chrispy.critter 5 лет назад

Zack just need to tell you, you are a true inspiration for so many people . You highlight problems and help the ones that's really needs it. You seems very humble and kind. You are also very cost conscious, which I like. You are, at least for me . A true role model. You have teach me so much with your other channel, to fix things. No I offer friends and family to fix the old broken tech instead of throwing it away, Or at least make a try to fix it. Keep up the good work! Annnnnnd I got a iPhone without a headphone jack... sorry :D

@XSpImmaLion 5 лет назад

Few more episodes 'till it turns into an exoskeleton robot hybrid.

@QAnyui 5 лет назад

What about making one side of lever is for front and the other are for rear brake? Because if she puts a different braking force on one side, the wheelchair could be unstable since, as an example the right side stops quicker than the left side. Sorry for my English but I do hope you get the idea

@cbr7170 5 лет назад

great idea

@rajeevarts398 5 лет назад

Yah !! Good idea

@adarshkrishna6434 5 лет назад

Exactly what I was thinking. With this installation one lever will hold one side. That doesn't feel safe enough if Cambry has to stop on a slope or something.

@DanijelBre94 5 лет назад

I thought the same, adding those brakes is stepback.

@pebamag 5 лет назад

I though exactly the same thing

@BraxenMcConnell 5 лет назад

I think it DOES matter what hole it goes in

@Delgado_dz 5 лет назад

LOL

@mo_is_out 5 лет назад

Yes officer this comment right here

@CRIZZZLPT 5 лет назад

Well, not like she is gonna feel it anyway.

@chickenray182 5 лет назад

Depends on the night.

@ch.illmatic 5 лет назад

Nah, stick it in any

@d1v1s1onby0 2 года назад

Hi - A couple of suggestions. 1. Fill tyres with water - I do this with my tractor, it adds weight right where you need it most for better traction and roll stability. 2. upgrade to front hub motors in addition to the rear - run them in parallel with the same controllers and give you 4 wheel drive. 3. If you go with front hub motors you could flip one front wheel backwards (Reverse the tire so it still looks "right") connect the flipped wheel separately onto a different accelerator mounted by Cambrys' hip. This would take you down to 3 wheel drive going forwards but you would gain a rudimentary 1 wheel drive reverse.

@stanfordcoffee 5 лет назад

As it sits, you have vehicle set up to break left and right, which has the potential to cause instability. Reroute the cables so the back are on one handle, and the front are on the other. Cheers

@benedictschmieder7249 5 лет назад

I would suggest hydraulic brakes. They are a little bit harder to install, but the force reuqired on the lever to stop the bike (especially with this heavy one) is lower. It's also relativly simple to get the oil flow to all brake cylinders. Oh and I would also suggest to use bigger brake discs, since the mechanical advantage through the leverage is bigger with those :) If I made mistakes, please excuse them, I'm from Germany and my English is a bit rusty since my degree :)

@KB-mo3sx 5 лет назад

And if you use roughly the same length of hydraulic hose the pressure in the brakes should equalize, and it means that the brakes should break equally even if one of them has less breaking pads.

@ROG-ht5cz 5 лет назад

Deine Englisch ist perfekt, nicht wie meine Deutsch 😂

@UTMopar 3 года назад

Hope makes hydraulic brakes where one lever works two calipers. In this case, one lever one each handle bar and they could operate brakes on all four wheels. Unfortunately, Hope can be expensive.

@cvspvr 2 года назад

dein Englisch ist Super!

@jmerced 5 лет назад

Love watching you guys. Most people don't realize how expensive something like this would be if it were made by one of the few wheelchair companies. I never subscribe, and I just did. PS. You guys are great together.

@tinamoul 5 лет назад

It wouldn't be that expensive, prototyping something always costs more.

@kunzklingsor9156 5 лет назад

She loves him. Who would not adore a human being so kind? This is movie material. Kudos.

@abdullafarid3202 5 лет назад

The off-road wheelchair is currently my favourite thing on the internet! Great work. I always respected your hard and beautiful work and inspired me to take apart cellphones and so on, but this is a whole new level! Thank you really! And to make Cambry experience something she never dreamt of is priceless actually! So huge thumbs up for you and all best wishes for her to enjoy this ride safely! Just a small note, I think it’d be better if each handle controlled the same tires ( one for both rear and one for both front tires ) I mean it is safer ( to avoid spinning in high speeds ) and easier ( since you don’t have to use both of them all the time ) It would require an extra long brake wire but it won’t be difficult to you! And it’s worth the extra work, believe me.

@JaysonDionisio 5 лет назад

Do a collab with Seth's bike hacks. It'll be awesome. 🤙🏼

@hsb14214 5 лет назад

Yeah... Seth's a little out of order

@nathanielvogler7335 5 лет назад

All the more reason, it will give Seth something to do.

@alaricloftus6277 5 лет назад

Yes! that would be so cool

@caydenfeemster5191 5 лет назад

He could clean up that cockpit so you cant see cables

@gdevansh 5 лет назад

Yes!

@BasketCase 5 лет назад

Really important safety / control aspect.... Same as many comments below; FRONT BRAKES ON ONE LEVER REAR BRAKES ON THE OTHER LEVER

@larryhawkes1347 5 лет назад

Thanks for taking care of this beautiful young lady and providing her this kind of freedom to get around in so many more places than normal.👍

@Roseneck12 5 лет назад

Put a ~90% angle on the handles. make them into joysticks or pistol grips or like a pod racer. That will give her a firmer grip on the controls and more confidence. You can take what you have now just cut and weld them at an angle no big mod needed.

@airmarshalls538 5 лет назад

Good too see what your doing for this woman!! Good Shit Zach

@petarau9514 5 лет назад

another day, another vid by Zach. life's goooood

@krymera 5 лет назад

Nice job, but I do have some suggestions. 1. Add lights In the Handel holes where you saw off the other side of the Handel 2. Add plastic covers at the wheels for wet weather 3. Safety belts if there is an accedent, she won't fly off the seat. 4. Emergency safety lights (parking lights) that people (drivers) can see her in the later hours when she is "standing" still. 5. Parking breaks, as you have mentioned in the previous video. That's it for now, keep up the good work.

@alucardat4929 4 года назад

You are a man with a big and kind heart. I wish you happiness. Regards from Odessa, Ukraine)

@tomhoblin4571 5 лет назад

"Getting it on is a little bit easier than getting it off"

@bxbLJ 5 лет назад

Getting it on usually gets me off

@WaneesMeftah 5 лет назад

zack 2018

@ryleyt3752 5 лет назад

Literally paused it right after he said that to search for this comment. Was not disappointed.

@redredredred2 5 лет назад

1, change the handle orientation make it more ergonomics. 2, control both motors with one hand. 3, left hand control both rear brakes, right hand control both front brakes, or one handle control all 4 brakes. 4, self get in with the chair redesign, maybe combine with a wheelchair rolling in and lock together.

@magic.marmot 5 лет назад

I've been trying to catch all of the videos in this series. I really love what you're doing here, and I'm trying to take the lessons that you've learned to carry forward into my own projects. Thank you.

@gregozo 5 лет назад

Zack, kudos man for being so creative and inspirational to us all. Keep on going!!!

@anishekchaudhary 5 лет назад

You could flip the break levers (rotate 180 degrees) so that rider can apply the brakes using fingers instead of thumb which is more effective :-)

@Coolwoo 5 лет назад

Sorry to point out the way you’re putting it, you’re implying that the thumb is more effective. Is that what you intended to say?

@anishekchaudhary 5 лет назад

@@Coolwoo No, I ment to say that index finger is more effective

@FranseFrikandel 5 лет назад

Looks like that would collide with the top tube of the frame.

@No1sonuk 4 года назад

He responded in another comment: "We wanted the handle bars to be as low as possible. If the brake handles were below the handle bars, they would clip the frame."

@adityabaradia3675 5 лет назад

Sir it would be safer if you put front brakes on one Lever and rear brakes on another..

@rambor-rgaming2535 5 лет назад

nope. because it kinda acts like abs.. because breaking force is applied same way. and it'd be more difficult to opeeate your way it'd be less fun

@xavierazad 5 лет назад

@@rambor-rgaming2535 Imagine if you pressed brakes and one side of your vehicle stops moving and the other doesn't.

@MrClarkisgod 5 лет назад

@@rambor-rgaming2535 Not at all. If you are sliding down a hill the last thing you want is to lock up only one side of the brakes. It could cause it to pull hard to one side... and off the side of the hill you go. Much, much safer and easier on the user to have both fronts and both rears on their own handles.

@Gilespargiter 5 лет назад

@@xavierazad Like a skid steer loader or tracklayer it would spin on it's own axis. Definitely not something you want to do at any speed, it will throw you over.

@xavierazad 5 лет назад

@@Gilespargiter Exactly.

@moveaxebx 5 лет назад

Zack, in most profound way, she is something special. God bless you both.

@allenwaters96 5 лет назад

Adding curved tube rails that connect seat-post (bike) to top of center seat tubes would allow her grip areas for side entry. Adjusting camber may also improve stability. Quick disconnect for steering control will allow her to enter from the front. Maybe a molded seat for her "Altera-Chariot". I love what you've done, please keep it up.

@BJMTM1 5 лет назад

Man you two would be so perfect together the way he looks at her makes my heart melt

@No1sonuk 4 года назад

They're married now.

@tracerandom7082 4 года назад

Bruh😂

@randomodbuild 5 лет назад

If possible, you should put both rear brakes on 1 lever and both front brakes on another. This will make it so she can hit both rear brakes with one hand, giving more stable braking without worrying about having to hit both brake levers at once. It may take extra long brake cables (you can tie them across the steering bar) but it will add a lot of stability.

@davidmiracle398 5 лет назад

A good video. Your delivery is smooth and informative. This wheelchair is very innovative and thanks to the two Rad Rovers is made with good parts and should hold up over time very well. Thank you for all the time, energy, and skill, that went into building the wheelchair and in the making of the video.

@sammhill8686 5 лет назад

What a heartwarming video series. Thanks for letting us share the joy.

@Wetkeazle 5 лет назад

You didn't mention one cool feature of the brake handle: the parking brake. When you engage the brake and push the button on the back , it locks the brake until you engage the brake again. Then the button pops up and releases the cables.

@tmworld3385 5 лет назад

The way Jack looks at her says it all #jack is in love

@StreetMachine18 5 лет назад

Nice job filming, Cambry!!! You guys rock!!!!

@robertmashburn8330 4 года назад

I’m excited for this couple. Such an inspiration. 🌺🌸

@laughingman3777 5 лет назад

Dude, you totally have a crush on her.

@deltavee2 5 лет назад

Is he Mormon too?

@laughingman3777 5 лет назад

@@GamingAmbienceLive Finally, somebody that gets it. Also cool handle lol does Cody know you're using it and that you have such a twisted mind? Let's be friends

@GamingAmbienceLive 5 лет назад

lol he definitely does because i make some controversial comments all over youtube lmao, including his videos, lets

@archiball7954 5 лет назад

she totaly digs him(":

@reoflex 5 лет назад

So do I. She’s a doll. And a soft spoken woman! Very desirable. They should all be soft spoken. Contrast her with a lesbian feminist foul and nasty, man hating loud mouth!

@fasfan 5 лет назад

You could install some sort of limit switch on the brake lever that interrupts the power. That way she wouldn't have to remember to release the throttle when braking.

@FantomsNephew 5 лет назад

Makes me glad! Both the purpose and the build itself! 👍👍👍 As for requested hints: Consider Ackerman angles on the parallell steering rod tabs!

@pauldegennaro7798 5 лет назад

Awesome patent that thing . Don't let someone else take your fire. It looks like a lot of fun . Look at her smile when she rides. !.

@TheFourthWinchester 4 года назад

Zack: "Getting it on is a little bit easier than getting it off" I'm glad he did good.

@HerrMarcoPolo 5 лет назад

Cambrys why you don't have your own RU-vid channel? You are amazing woman! ❤️😉

@rodrissanen7047 5 лет назад

Thank you Zack for that link, my 1-arm ebike riding just got a whole lot easier once I get that lever.. In one month I've put over 850km on the bike, works so well..

@smiffy5075 5 лет назад

You two make such a great couple! I'm so happy for you guys!

@PSBeard 5 лет назад

I suggest hydraulic brakes, they are far more suited to that application then the mechanical ones you are using.

@darrenwoloshyn 5 лет назад

PSBeard I have hydraulic disc brakes on my giant Talon 2 2018

@ultiss 5 лет назад

i agree, massive braking power without much effort at the lever

@nathanielvogler7335 5 лет назад

But can you get a double hydraulic lever?

@Gabriel-kz6kb 5 лет назад

sure, its possible you just need a splitter in the line.

@jonah_chua 5 лет назад

@@Gabriel-kz6kb but does the lever move enough oil to brake to 2 callipers?

@MichelPostma 5 лет назад

I never knew about those double brakes! Btw, it seems like the rear lights need to be turned on manually? Maybe connecting them with the front lights or using a dynamo//battery with light sensor would help? I know we have some in Holland for our bikes, but its been ages since I have used them

@speedbuggy16v 5 лет назад

awesome, glad there was an off the shelf solution for the brakes!

@simongreaves210 5 лет назад

You Two. Made for each other. It's Lovely.

@JohannesGustavssons 5 лет назад

If you don't intend to have searing brakes like on a bulldozer or farm tractor I see no reason for connecting each side separately. If you still want two handles you have two serious and safe options: 1. One front and one rear, like on a normal bike. No risk of it pulling to either side in an emergency situation. And shouldn't be able to tip over. 2. Connect the brakes in a diagonal pattern. Front right and rear left. Even if just one brake is used it shouldn't to pull in either direction. Just like dual circuit brakes on any vehicle. However, if both handles are used with uneven pressure it may pull. The best and also simplest way would be to connect all four brakes to the same leaver. Simpler to use and always brakes on all wheels. It could be a good idea to adjust it so that the front brakes a little bit more than the rear, like on a car. 60-40 or something like that. No problem hooking up multiple brakes to one single leaver. Car manufactures has bin doing this for ages on parking brakes.

@jacobshepherd3997 5 лет назад

Johannes Gustavsson I agree with you on every point but the last one. Those are mechanical disk brakes, they already take a decent amount of force compared to good hydraulic disk brakes to stop. My last bike had mechanical disk breaks, and on long descents my knuckles wouldn’t be white from hard gripping by the bottom. Then spread that force out to 4 different rotors plus the friction in the system from the lines running through the cable housing. And I doubt you would have hardly any stopping power

@JohannesGustavssons 5 лет назад

Good point!! Didn't think about that at all. Maybe it would be possible to create a mechanical advantage. But in that case the brakes would need to be very precisely adjusted as the travel of the brakes radically decrees. Any play would be fatal for the function of the brakes.

@enfentonk 5 лет назад

She's becoming a pro at the intro

@timrudisill813 5 лет назад

Absolutely phenomenal ! this is a marvelous, marvelous thing. appreciate you showing it to me and showing me further that it could be done. lovely young lady, and Marvelous young man. you must forgive the typos etcetera in this communication... I am using Google Voice typing. it still needs a bit of training. haha haha. I've had a few Strokes myself this summer but I'm coming along fine. use a wheelchair and I'm thinking about using one like you made. thanks ever so much.

@Wiganpilot 4 года назад

I have seen all the videos about this tandem bike, it is just awesome. Cambry seems like a really cool person and a bit of a Dare Devil too :-D Brilliant invention.

@kaiindra637 5 лет назад

Looking for all the "is that your girlfriend" comments

@jimhorrace6026 5 лет назад

lol me too

@Max-zp9xv 5 лет назад

Why who cares if it is good for him

@audreandre 5 лет назад

nah i look a comment "marry her" tho

@paradonym 5 лет назад

I'd guess it's one of jerrys girlfriends - of course - you see it... but it's probably one out of many.

@ross-carlson 5 лет назад

@@GamingAmbienceLive Sadly, no - they are both cultists (Mormon) so that's not happening sadly.

@dzengerink 5 лет назад

Ok no worries you didn't give your viewers credit for suggesting to install the front brakes 😉😉 But second rookie mistake, instead of combining the rear and front on each side on each brake handle, try to combine both front brakes to one brake handle and combine the rears to one handle. You might otherwise tip over to one side when going downhill too fast.

@josharntt 5 лет назад

The guy might've wanted to be anonymous

@heikowolf2361 5 лет назад

Zack, this build is pure love

@AndrewJHewitt 5 лет назад

I think for added stability, you should have both rear brakes to 1 lever and the front to the other. Due to the about 75% of braking done by the front, she could adjust front/rear braking on the fly. Certainly an interesting project as my GF is also limited in her mobility, I may be doing something similar in the future.

@FFM0594 5 лет назад

Maybe she just wants flowers.

@ZacksJerryRig 5 лет назад

Well... she got a four wheeled monster electric fat bike instead.

@JacobTechShit 5 лет назад

ZacksJerryRig you clearly have a crush on her... just get her some roses instead of spending 500 African kids yearly meal budget on a wheelchair

@Elias_g1 5 лет назад

@@JacobTechShit WOW,this is rude !

@Zarrar2802 5 лет назад

welp, theres one channel Im never gonna be watching @@JacobTechShit

@DennisCrouse 5 лет назад

@@JacobTechShit You mis-spelled "In addition to"

@mtnmyke 5 лет назад

For the love of all that is holy, stop touching the rotor! The oil from your skin is enough to destroy the pads. Also, front and rear should be independent so she can properly modulate her braking. 👍👍👍

@anthonyt4981 5 лет назад

like left handle brake is front and right handle brake is rear idk

@caydenfeemster5191 5 лет назад

MTNMYKE I was thinking this the entire time

@TheUberKevlar 5 лет назад

You must have some pretty oily hands, dude. My brakes work just fine after years and they've been through much worse.

@roopekaappola7177 5 лет назад

Lmao, I once was working on my 2 stroke weed eater, I was adjusting the carb, with the engine over my bike which was laying on the ground, oil had built up and was basically leaking because I was running too much oil, so a drop of 2 stroke oil fell on my back brake, it still fine

@seanhawkins6184 5 лет назад

Same all the real MTB people know

@privatesector0422 5 лет назад

I've never seen a more perfect couple. You two are definitely made for each other.😍

@johnphillip1711 5 лет назад

Prob said elsewhere but compressed air makrs removing the grips a doddle (blow gun nozzle under edge and then just easily slide them off) Also I used to tap stuff on with my hands till I jarred the nerve in my palm, got a lecture off the doctor about it, told to use a rubber mallet instead. My wife has MS so I'm trying to forward plan and this gives me ideas and hope. So thanks :)

@miguelespinosaruiz9003 5 лет назад

You should add wheel fenders you know so the dirt doesn't kick back up well off roading

@benjaminrafiee6966 5 лет назад

U need suggestion? marry her already.

@osamazch 5 лет назад

just what i was thinking

@z-flex5959 5 лет назад

Meto

@ART-wz8mp 5 лет назад

I think they are best match for each other..

@roni2671 5 лет назад

@jamboy1686 5 лет назад

Nah

@greyhunter147 5 лет назад

Beautiful project! I hope someday it will be for sale for everyone who needs it! It has some uphill traction problems on the gravel ... probably due to the CG too far ahead of the rear wheel axle. I think it can be improved by adding 2 independent suspensions on the rear wheels (5 / 10cm of excursion) to allow a uniform unloading of the weight on the driving wheels. Maybe an adjustable gas type, so you have stability on asphalt and comfort and traction on dirt. Sincere congratulations! I'm waiting for new videos and news!

@lionardjean 5 лет назад

This vid is absolutely amazing! Never seen a bike rigged like that. Subbed to your channel. Looking forward to see more coming for you guys.

@cherunaranga3874 5 лет назад

What happen if you put some sensors in the bike like dji drones

@MiketyDooDaa 5 лет назад

What would that help with though?

@josharntt 5 лет назад

Nothing would happen

@ahmeddagher 5 лет назад

يسطي عايزين نفرح بيك بقي ونقولك مبروك بقي 😀

@ahmeddagher 5 лет назад

@@medouj I'm Egyptian 😀 but the comment related to his Middle Eastern fans 😂

@TtttTt-ub5xb 4 года назад

افرحنا فيه❤

@valprem6401 5 лет назад

Love the fact kambry is on the show again!!!

@wingmanalive 5 лет назад

If this guy doesn't have a crush on this woman I certainly do. It's amazing what you're doing for her!

@mslomnic 5 лет назад

It looks like upper brake line is pulled heavier So there should be connected front brake which is more effective

@guy.h 5 лет назад

Yes, all the 'put both fronts on the one lever' have not realised the levers exert different pulls on the cables. Therefore their solution would be MORE likely to induce a skid. With the front on the outside hole & rear on the inside and a bit of adjustment they should be able to find a nice balance.

@__ryan 5 лет назад

3:02 That's what she said.

@josharntt 5 лет назад

Might want to double check that

@__ryan 5 лет назад

@@josharntt Might want to double check that

@sparky2059 4 года назад

AWESOME job Zack , Very cool

@charlieharper2529 5 лет назад

this converted two bicycles project is one of best things i saw in my life :D

@tahmidhossainadib5278 5 лет назад

why don't you use the left leaver for the rear brakes and right leaver for the front brakes... :/

@ZacksJerryRig 5 лет назад

Because these brake lines were already perfectly cut for the spots they are in. Streatching them accross the frame would get messy.

@tahmidhossainadib5278 5 лет назад

well that makes sense... but i think she will face some problem while pressing only one brake...scene it's stopping only one side of the bike...but for the most part it will work just fine 👌👌👌

@batagnam 5 лет назад

@@tahmidhossainadib5278 Yeah mee too, it's still a good solution for now but having the brake aligned is a better one. I'm surprise that no compagny offered you a solution before Zack, it would be great publicity for them. I guess there would be a solution to have only one handle bar with two brakes like a regular one :) It would need a mechanism but it isn't impossible :)

@tahmidhossainadib5278 5 лет назад

@@batagnam there's no clean solution for this type of problems...but if someone wishes there's a lot of after market tools/parts to solv this problems... i mean if you want the most out of this you can use "hydraulic brakes if you want...than it will be one leaver for front and one rear...and you can use only one line for rear and at the brakes you can use a 'T' splitter... i mean at first this will be a messy as hell...but if you can stick to the plan you'll get a braking system which is verry powerful and aloso efficient :) ✌

@willian.direction6740 5 лет назад

This could help turning in tight slow places like turning brakes on a tractor.

@jremingo 5 лет назад

Change the brake caliper to shimano or a avid.. it's alot stronger.

@yatharthagarwal2041 5 лет назад

Love the way she says let's get started😍😍

@JaxonRon 5 лет назад

I think what you're doing is great. I love that you keep making improvements to it. I'd suggest redesigning the handlebars as well. Keep going. This could end up helping others as well.

@thatdude5104 5 лет назад

Warning: It definitely does matter what hole it goes into!

@_thegreasemonkey_ 5 лет назад

She is so so much beautiful 😍😍😍❤️❤️❤️❤️❤️❤️❤️

@spice2110 5 лет назад

U did it wrong. "show bob and vagana" np mate

@rahulmukundan1245 5 лет назад

Congrats and You two stay happy togetherrrrrr.

@michaelellixson3633 5 лет назад

Just can’t say anything else it is so fantastic beyond words I can tell you that thank you for being

@Rs-02 5 лет назад

JUST GET MARRIED

@truthhurts7742 5 лет назад

Dude...I will marry her if you dont. She is hot, cute, and funny. You guys make an awesome couple. God bless you both. 😊

@bonilla2022 2 года назад

Great video. Happy Trails! :-)

@ChristopherKroukamp 4 года назад

Such a nice couple, perfect match for one another, love your videos too.

@yousifa4002 5 лет назад

Use this as a “marry her” button

@kevinhosea85 5 лет назад

"I don't think it matters what hole it goes in"... might want to check with your girlfriend on that lol

@CRIZZZLPT 5 лет назад

not like she is going to feel a difference anyway

@Tater_Lord 5 лет назад

@@CRIZZZLPT she can't use her legs it doesn't mean she has no feeling in them however

@kiyoponnn 5 лет назад

@@CRIZZZLPT Rude lol

@sanjays9080 5 лет назад

@@CRIZZZLPT ummm... Do you even understand how the human body works?

@Max-zp9xv 5 лет назад

@@sanjays9080 hahaha lol 😊😉😀

@jessicag6955 5 лет назад

Love these! More videos with Cambry please.

@garystarnes5178 5 лет назад

Hey Cambry. You nailed that intro!

@jordongingrich8913 5 лет назад

Woo more bike! These 2 must be dating by now

@gdevansh 5 лет назад

Don't interfere in his personal life

@jordongingrich8913 5 лет назад

@@gdevansh no interference, more like support! On camera they work well together. Plus super sweet projects

@TheROZ 5 лет назад

Im betting you marry this girl

@truthhurts7742 5 лет назад

I hope he does. They look happy and awesome together. 😊

@athul_krishna_kr 5 лет назад

A small update: they're engaged 😍

@another3997 3 года назад

Great to see he did this upgrade. For anyone riding or making a bike/trike/quad, just remember that around 70 percent of the total braking ability is generated by the FRONT tyres. As Zack found out, back tyres lose grip due to inertia/weight transfer. Good for doing skids, bad for stopping.

@PNTTVReacts 5 лет назад

Loved your video about building the Cambry. My small suggestion would be to add a seatbelt and straps of some kind for her legs to keep in place. Front and brake lights as well.

@user-hh7ii6rk1i 5 лет назад

I think they are secretly dating.

@TheUberKevlar 5 лет назад

I get that vibe as well. Could be reading it wrong though.

@johncuervo3019 5 лет назад

@@TheUberKevlar that are engaged

@za7v9ier 5 лет назад

@@johncuervo3019 married alr

@Mr_Unfazed0 5 лет назад

Theyre now married 😊

@raffmaxi 5 лет назад

Well that escalated quickly

@muhammadbinafsar5339 5 лет назад

Did she stayed there that night? 😉

@jim_8621 5 лет назад

I think that you should mount the front lights to the black arch over the tires in front of the shock absorbers (the attachment for the front mudguard). Then the lights will illuminate the turn as well.

@projectconsultant7174 4 года назад

Apart from Jerry Rig Everything. Jerry and Cambry are the cutest couples. I adore them. Jerry-builds an electric custom bike for cambry. I could feel cambry is emotional. But they don't show that cry part or anything. They keep their precious moment personal. Love that. Thank you for inspiring millions around the world. Hats off and like cambry say " Kudos to you guys". Work you guys doing in Kenya is amazing. If I have request, jerry should explore a project on less expensive or more afford mobility gears for a special need people and review it and rig it and make it better. 2020 I wish you guys more success, love and everything that you wish for.