Kudos for your video. Your input was the key element in my successful endeavor to add cruise control to my 2010 Toyota Corolla base model. Oh, the thrill of victory! Thanks, again.
Hi @bullelephant1, I just installed cruise control in my 2010 Toyota Corolla CE. The button works and the cruise indicator shows on the dashboard, but when I tried it on the highway at 100 km/h, the car slows down when I remove my foot from the accelerator, even though the dashboard still shows "cruise." How can I fix this issue? Am i missing something?
I have a 2013 Tacoma base cab, 2wd, 4 cylinder, manual transmission, and they removed most of the prewiring in this model (2012 to 2015). I had to get the cruise switch with the horn ground harness, which works out the same as your 3 pin connection. I also had to get a clutch switch and found the factory harness did have a connector for that, but no cruise light and I need to run a couple of wires (ground & ECM) and hope it will work then. The connector you were trying to get the female terminal pin out of has a little lock on the side opposite of the connector release, you have to pry it up just a tad and then you insert a push pin in the large hole to pull the wire terminal out. Glad your worked out easy and the earlier automatic transmission Tacoma's did too.
I have an 09 corolla ce automatic. Did everything with a new stalk, plugged in and even put pigtail pin in upper left. Horn works but cruise doesnt. Smh
Thanks for the video. Is there anyway you could know for certain if a car already has cruise control installed if the switch is missing? I have a Camry 2005 Manual GLi. It has the 'CRUISE' logo on the instrument panel and also the hole where the cruise switch is supposed to be installed, but I'm not sure if that's the only thing missing. I've scoured the entire internet with no real luck.
I bought the cruise control stalk and just installed into my 2018 Hiace van. Its not working at all, seems the van dont have prewired the cruise control system.
I would think so. Most all cars already have it, but are just missing the switch. Do a Google search and see if you can find anything. Good luck with your project!
