Adding Rear Remotes To Kubota L3560 - #49 

Excellent work, great patience. Fantastic approach !!!!

That was an awesome video and very detailed on install. Thank you very much

Great video. I just installed two rear remotes on my L4060 thanks to this video.

Nice job and documentation. Appreciate your efforts.

Saw your video on rear remote so yes on the taking off rear tire to access ports

Nice job.

What is the make and model of the remotes you installed? I can't find them online anywhere. Thanks

Nice job on the video. I’m about to install two rear remotes on my new 3560 ROPS.

So awesome, thanks for making such a great video about this. I'm gearing up to do that same thing on my L3560, could you detail what parts or kit you bought for this?

Well done. Great camera views and explanations of the process. Thanks for your time and knowledge. You made it look easy but I know we only saw a small % of the time you spent. How long did it take start to end including moving cameras and editing?

Awesome videos! I have a 3560LE and I added back a lot of the stuff that makes it an LE. Your third function and rear remote videos have given me some more inspiration. Did you add back the cruise control? I was surprised when I found out that an $80 switch was all that it takes. CC is really nice for mowing or roading.

Are those factory rear remotes from Kubota? if so do they give you 1/4" or 1/2" valves?

If you have a 1set back there can you get a couple more to stack on top of the other one plus you have to buy a new lever . Assy. With handel

Hi Jared, thanks for the video. I have the exact same tractor, the dealer install my 3 rear remotes. I was looking at quick connector on the back and I do not really see how you can release the male end of the pioneer connector one you insert them. I have not messed with it, but how does the female slip ring get pulled back to release the hose with that “housing” over them?

love the video. I am waiting on my 2nd valve kit to come in. i ordered it about 4 months ago from messicks. Kubota parts are taking so long to be delivered. it was a 3 month back order on the valves.

I have a L4060, wondering if I would use the same kits as you. Part Numbers Ive came up with are L8396 for base kit. Then L8308 valves then the stacking kits L8393, L8394, L8395. Mine is also a cab. My issue is getting parts right now. Base kits back ordered I guess. That is a great video, love how detailed you are and logical in the order you installed everything. Thanks very much !!

Hi Jared, I would like to do the same on my L3000. Could you tell me how you find parts that does fit on your tractor? Thank a lot for this video. That's so great that even a french speaker like me did understand pretty well.

Can you provide a link or part number for the tilt cylinder? Adding second remote this weekend

Trying to decide if I need 3 remotes and the pto kit. I am planning on the TNT kit so that will steal two of them, but I wondered if I could just unplug the side link if I needed to use that remote for another rear implement? Just trying to think of what applications I’d need 3?Any ideas? Not sure if I need rather than want to justify the third remote LOL. Suggestions, Ideas?

Got another quick question. Not sure what the part is called but when you removed that cover/plate at minute 14:00 to install the manifold, how did no oil come out? Did you do anything prior to keep the mess to a minimum or was this just normal behavior because the system was not under pressure. Thanks! Just a heads up, I shared your video on the "Orange Tractor Talks" forum. I'm certain there are others that will benefit from this video as much as I have.

how do you connect the hydraulic coupler to the rear hydraulics? Do you just push it in?

Jared my Grand L came with top and tilt. I want to add third set. Dealer has suggested waiting until 400 hr service to do because of fluid loss at install. Did you experience large hydraulic fluid loss? Also difficulty for average to slightly above mechanical skills. Hate to pay dealer if I don’t have to.

What did you lubricate the orings with during the assembly?

Jared, I purchased the same tractor as you in June of 2020. The L-3560HSTC LE. I like the Top & Tilt you added after the remotes. More importantly though, I noticed that since you installed the remotes (and the Top & Tilt), you added a backhoe (BH92). I've also got the same backhoe and am wondering how you managed to fit the Top & Tilt with the BH92 subframe installed? If you try to order the 3560 with a backhoe, it says you can't order the Top&Tilt kit. It's either the backhoe or the Top&Tilt kit... one or the other. My guess is that there is a clearance issue with the sub frame required to support the backhoe. Have you found that, and do you have any documentation (videos) of any possible clearance issues and how you managed those? Additionally.., have you ever had any issues with the hydraulics after swapping off the BH92 or when installing it? I've got an intermittent issue where I get a low gear type growl or rumble when starting , and then a low hum vibration while running. If I connect and disconnect the hoses, it may resolve the issue. Have you seen anything like this? Thanks so much Don and Carol It's a Mad Mad Homestead

Guess this has been up for a while but I just found it. This is a GREAT video. It is really hard to video something when you have to work around all those odd angles, but you did a really good job. I have a Kubota L5030HSTC with two dealer installed rear remotes and they have been a problem since day one. I am considering re-doing them, and your video has been very helpful. I am 80 years old so not "bending" as well as I once was, but still looks do-able. The problem I have is the hoses from the quick connects on the second remote bind on the cab and frame as they travel down to the valve. Looks like they either used the wrong bracket to mount the connectors or routed the hoses incorrectly. All that adds up to the fact that it is almost impossible to get the "breakaway" to move forward or rearward as the hose is bound up. Is there anyway you could post a pic or two or send a diagram showing the routing of your hoses from the valve to the disconnects. I know its a 3D problem, but I was hoping. Anyway - GREAT video -- keep them coming

We’re did you get your kits from.

where did you get the kits from?

jared. do you have any information on LED light conversion's. my work lights are LED but I wanted to change my head lights ( all 4 bulbs ) and my interior light. I just don't want to replace them and burn something up. thanks

Which rear remote kit did you go with? Part #? Cost? Had to go with WR Long for third function or wait a year for a kubota one, like we have nothing to do lol. Thanks for the videos!

How much did you save from not having the dealer do the install?

Why do have the float links attached on a QH15 when they are meant for a non quick hitch not to mention most things that need to float have a float link built in it

Where did you order your kits from? What were the prices?

What length hoses for top and side links?

What was the total installation time involved?

Great video. Unless you can come over and install mine for me, I think Ill take it back to the dealer. :-)

What are the part numbers for each kit installed?

Were there torque specs provided for all of the bolts and nuts?

Where your tires loaded with ballast? It didn’t look like it was that bad to remove that tire/wheel.

That would be great - what would be the best way to send you my email address

Just curious about something... Did you lose a bet with your barber? 😆😆😆

Ah, I see you’re rocking the Mid life crisis Mohawk. Tell me, does it actually make you more aerodynamic like they say?