I made a huge one at work years ago. I used 1"x1/2" flatbar, one side with a kick, the other side with an offset. I used a torch to heat and bend the f.b. I need one now for personal use and dont have a torch. This is a really good idea! Thnx man!
Nice tool! Thanks for sharing! Tip- Try cracking the part loose while it's still on the tractor- You won't have to the hold the cylinder down while cranking on the wrench...
Thanks for this idea. I also copied it, except instead of welding bolts, I drilled holes in the bars and used O-1 .250 drill rod - just in case it breaks and needs replacement. Worked great once I figured out that it was a left hand thread.
