We address one of the most frustrating aspects of restoring a Adjustable type Wrench... Check out what prompted this video! Ben Mall- • Rant About Crescent Wr...
Oh man. First of all, thank you so much for making a video to address my problem in the middle of the night. That is super considerate of you. I know you're so good at solving these kinds of issues. I will get some stronger reading glasses and attempt to fix. Might need to buy a screw extractor set, as well. Thanks again. You're the best.
Your tool restoration videos are like watching a Buddhist monk practicing zen meditation. Lots of concentration and zen like focus. I have learned a lot from you. Many many thanks.
The pliers turned out beautifully! They look like they just came out of the box. And your right, the new nut you made for it looks so much better then the rivet. I had never seen a spoke tightener until now. Thanks for sharing these cool tools.
Thanks for the lesson. Bought a Channelock 810 this weekend at a garage sale for 50 cents. I cleaned it to the best of my ability and the jaws started working. I called the company and they told me it should unscrew to take the thumb-wheel out. I then saw your video on the axle removal. Thanks again.
Thank you so much. I have been trying for about 3 weeks to get a pin out. I seen Ben’s post yesterday and realized I wasn’t the only one. Nice detail video and great tips. I want to thank you and thank Ben for posting his problem.
I am sure this will be one of your most useful videos. Addressing a problem that many of us must face. I am almost ready to open my tool channel yet, after 7 years, I find I am having to refurbish and/or locate many of the tools I will need to start. Seems that they have been scattered all around the five buildings or just piled in a corner. And all your videos give me more and more incentives to get with it. I will be back in Texas in a week or so from cold and raining Georgia. Thanks for this video...captjack
Thank you so much for doing this video. I know it meant the world to Ben. And it was a great refresher for me as well. I have kept up with Ben since you mentioned him a while back and like his style. Hope he continues on and if so he will get better and better. Thanks for all you do to help us tool nuts.
Ugh, easy outs or screw extractors... I broke one off in the engine block of an 87 Ford Taurus wagon I owned when I was in my early 20's. Needless to say that was the last time I used one. If I knew then what I know now and learned from people like you, that car wouldn't have become razor blades so soon lol. Awesome video as per usual.
I have a old J.H. Williams AP-10 adjustable wrench that had belonged to my dad who has passed away. Our barn took 21 inches of water in the flood of 2016. This wrench was rusted shut. I used electrolysis to remove most of rust, got it loosened up. I have never taken one apart, but I knew about the screw. I was able to back the screw out a good bit, but it hung up. I then searched RU-vid, and and found your video. I ran the screw back in, aligned the slot with the peens, and at vise, I was able to use small punch to push peens back as you suggested. I have plenty of adjustable wrenches, but my curiosity led me disassemble the wrench. Thanks for your video. Joe Estes, Bossier City, La
wow i bought a small vice at an auction ,,cause i liked it ?? when i seen you turn yours on it's side i was amazed ,,, i didn't know what i had .. Thanks for the video Ed Loretto Ontario Canada
Thanks for the video. Great job of explaining the process. I like Ben's channel also and I could tell he was getting a little frustrated. I would hate to see him give up on those wrenches.
I just bought an 18” vintage Jamestown, NY Crescent Adjustable wrench and was having this same issue. I dremeled out the peening and the screw backed right out. Thank you for your detailed videos!
Awesome mock-up and instructional skills. A couple more ideas if I may; if you’re trying to isolate the heat to just the screw try applying the tip of a soldering iron to the screw head for a couple of minutes (this works great on old rusty screws in wood too). If you don’t have a soldering iron heat up a nail point to red hot while clamped in a vice then touch the wrench to the nail. If you have a pin instead of a screw that is frozen to the adjusting knob -like your auto wrench-slide a shim between the knob and housing then use a punch to drive the pin in slightly to break the bond. Awesome video-Time to regroup and re-attack Ben Mall! PS. Who the hell would give this a thumbs down?
I've had my knuckle buster for years and never gave the adjuster a 2nd thought till the pin fell out and took the thumbwheel with it. I just picked everything back up and crammed it back together. All my stuff is pre-oiled anyway so no worries. Thanks, Crafty Scout and happy day 2 U!
Ingenious, thank you sir for sharing your experience with us. A simple yet effective method . Thanks again been struggling with a wrench for a few days already this video is invaluable. As always your skillful craftsmanship is amazing.
Thanks for that, i have never needed to do that, but i have some of the older style wrenches, now i know what to do if need be, thanks again, from Australia.
This video is unbelievably useful. Thank you so, so much. I have a combined adjustable spanner and alligator jaw spanner where this has shown me my next steps. A HUGE thumbs up.
Great practical advice. Thanks for sharing this information. I had always wondered how to remove a thumb wheel pin or screw and after watching this I know how to.
Thank you, thank you my friend! This classical fits under great mysteries which seem obvious upon revelation! You are so generous with your knowledge. 👍🏼👍🏼👍🏼
Very nice instructional video. It’s like going to tool restoration class. I’m sure Ben got something out of this and he will not be so frustrated. Thanks for all the interesting videos!
Hi Frank! I saw the look on Ben's face and he wasn't having fun... Like me doing plumbing! LOL This should all be fun and everything a challenge! Thanks Frank!!!!
Thanks so much for taking the time to do such a detailed run through! I don't restore wrenches but a few of the tips are sure to come in handy on other things.
Thanks so much for talking about this. Thanks to you, I'm trying my hand at tool restoration on a couple of wrenches. One has the threaded pin and I was able to get it out. The other (an auto wrench) has a pin. Thanks so much for the tips. Keep posting videos, I can't get enough.
Hi Robert! It really helps in this hobby to watch other people restoring tools so you can see what works for you! Some tools are just tricky but easy if you know the trick! These adjustable wrenches are fun if they aren't to beat up! Thanks so much!
5 лет назад
Thanks for parting with your hard learned knowledge.
Really like that beginning with the speed nut wrench first time we have ever seen one at 55 wow never see it all. You sure have a GREAT accumulation of fine hand tools wondering back in time just how many of any type tool you select from your collection were made in America that would be an interesting story to share as would how many of the tools on a particular group of your collection are still in business. I think I love American history a lot sorry for that. MEMORY LANE HERE Being from aerospace job shop involving sub-assemblies for aircraft structures, we used a staking tool a circle of very hard tool steel of half moons protruding from the equally hardened steel cylinder you hit these with a hammer and it formed the material of the holes edge into the holes diameter equally in the circumference of the hole usually for bearings bushings even like in your great video share threaded headless screws. Nice video share thank you for the memories. Lance & Patrick.
I absolutely hate screw extractors. I found that HF has cheap sets of left hand drills. There are usual Chinesium but have always got the job done for me. Nice tips on removing the staking from those wrenches. I usually use the milling machine to remove the staking from the holes though. I have an old Palmgren vise like that and use it all the time. Thanks for a very informative video!
Great timing and Great tips and explanations. I have some wrenches to do as well. one is a very rusty thing my kid found on a biking trip, and brought me as a gift...(you can see it on my Facebook) Hopefully I will have it easy on the cleaning and derusting... Thanks for sharing.
Hello Yotam! I already passed by a few wrenches because the screws looked very bad and I knew it was more work then I wanted to put into that tool! Thanks so much!!!!!!!!
Great tips. Screw extractors scare the hell out of me. You gotta have a soft touch with them. Break one off and your mentally scarred for life. Can't drill out the hardened steel.
Oct.,'42. Men were fighting and dieing in Guadalcanal, and Tunisia. Leningrad, Stalingrad, and Moscow were under attack. There was a big industrial ramp up going on.
an impact screwdriver is a good tool to have & it helps to heat wear the the tread of the pin is as you said it sometimes on the other side nice video.
great work showing how to remove different pins waiting on next great video. Also mate you need to go to RetroHax published today what an amazing set of pliers never seen anything like them you will want a pair im sure