ADVANCED Locks vs. ANTIQUE Locks, Which is Stronger??? 

Don’t be scared of that 50 cal shrapnel…it’s not that bad 😅😬.

“If it can’t handle the steel, it doesn’t deserve the brass.” *Brandon Herrera

The key for the Big old lock could be used as a weapon also.

I used the ARX in my last year in the Italian Army, I love that gun (and his HEAVIER predecessor AR70/90)

The Lock Picking Lawyer opened that first lock with a magnet, a strip of sandpaper, and two pairs of pliers.

Fastest moving lockpick I've ever seen. Don't let the lockpicking lawyer see this.

I love when people say "This is bullet proof" as an exaggeration that its durable.... Then Matt trys to shoot it. Classic!

The bit when Matt was "looking for" the key to the old fashioned lock had me dying! lol probably more than it should have...

Matt be careful when using 9mm rounds, if it were to ricochet off a lock and hit you, it could blow at least one of your lungs out the back of your body.

Matt- “we are seeing which lock is the strongest” 50- “who needs a lock when there is no more door”

Now I wanna see a LockPickingLawyer and Matt do a race to see how many locks they can unlock in a certain amount of time. Matt gets a variety of guns, but has to run them in order (start small and then go large). First one to finish line wins....subscribers. DO IT FOR THE SUBS MATT

I freaking love your introduction every single time!! The creativity is 100%

Matt, over 10 years of documented on video experience. Also Matt: *grabs a bullet* "Ow, it's hot!"

I'd love to be Matt's local gun shop... Just find the craziest guns available, and always know they won't be on the shelf for long!

When hes using the keys it reminds me when you have too much items in your inventory but your looking for the most obvious one but cant find it. Also good work bro keep the vids going my dude

Matt, your humor will never get old.

I half expected the Lockpicking Lawyer to show up. Sad he didn’t !! Make it happen, Matt!!

I love how the Army locks show how most things in the army are. Difficult to work with and aggravating

Matt is so awesome, it’s great to watch and see how far he’s gotten over the years, and I finally got to see him in person, was just at the restaurant I work at a little bit ago, truly amazing!!!

I wanted this to be a collab with LPL so much! Matt make it happen!!!

Lockpicking lawyer also has some really cool firearms that he occasionally flexes in his gun lock videos. You two MUST collab!!!!

Such a great weapon more reliable than most AR’s and for the first time a gun company has asked what if our customer was left handed so this thing has special place in my heart!🤯🔫💜

1/15 Wizard!!!...LOL!!😆 🤣 😂...Thanks Matt!!...Happy Father's Day!!🍻

I owned an ARX100 for a few years. A few things about your gun... The button under the trigger guard is a magazine release. The side buttons were put there to make Americans feel more comfortable with the operation, but the button under the trigger guard is much easier to use. You can buy a knob for the charging handle if you are not going to move it from left to right often. It costs about $5 and you simply push it on over the peg and it'll lock itself into it with a spring. This will save your knuckle. The grenade launcher cover can be replaced by a picatiny rail. I think that one was $20, and it lets you take full advantage of all the accessories you can use with a picatiny rail. You can find short barrels from Beretta in case you want to SBR it. It's simple to swap out, and better Beretta sells them every now and then even if they tell you they don't know when. The gun accepts Gen2 PMAGs, but not Gen3. You can make the Gen3s work if you remove the two little ledges on the back side of the magazine. The gun is awesome and everyone I know that had one loved it. You can run it pretty much dry and it'll still work. Beretta says if you oil it, you only need one or two drops and you're set.

Watch out w/ the 9mm Matt, I heard it can blow your lungs out 😅

Your videos a brilliant. Thank you.

The intro is 🔥🔥

That big lock was designed for Wells Fargo wagons in the late 1800's to early 1900s. It was designed to repel revolver and lever action bullets. Used to protect bank transfers and mail.

The Wells Fargo lock was boiler plate. It was one of the first high strength steels made in the early days of the industrial revolution. It was only thirty to forty years earlier the main weapon was a muzzle loader. When the lock was made the 45-90 Government was the big gun. It would not have the same effect as the black tip.

Matt, I really love your video's because I can fast forward them without the feeling that I missed anything.

As a BF4 player, i'm very happy to see this video today. Thanks for that. This is actually my favorite weapon in BF4. Made so many kills with that beast. Looks great to me even tho it looks thicker IRL than IG but damn, loving it. Thanks for that Matt !

Matt can act so awkward so easily after all the years of intros love it 😂

"Hey man watchu got in that shed" "The shed?" "Yeah!" "Oh come out, I'll show you. Mind passing me the shotgun that says 'Key'?"

I own a ARX-100 I love it! Very fun gun to shoot. One of my favorites

I'm stoked to see the Henry lever .22 used in the more recent videos. It's easily my favorite gun I own (I don't own many)

I was soooooo worried for you and the family, Matt when you brought out that 9mm lung blower. I'm just glad you and your lungs stayed together.

i love how early 20th century lock makers thought "how do we make a really strong lock, and they were like...what if we just make a normal lock....just bigger?"

I love Matt he’s so dramatic 🙌🏾🤟🏾🔥

I like the breakdown in the beginning , giving a little extra info on the gun for people that are interested in picking one up.

"forgot which one it was" Matt kills me 😂 I appreciate the dad jokes

Hey Matt! So if you want to test if a metal is hardend, take a file to it, if the file cuts deep into the metal, it's soft, but if it "skates"/doesn't cut that means the metal is harder than the file. Love the content keep it up!

That was my favorite "I love you and I'll see you next time" of all demo ranch videos

I absolutely love the sound of all the keys @demolitionranch

My favorite category of lock testing!

The thing i love about matt is that he hasn't let any of this change who he is as a person, through the growth of his channel, the ups and downs, he's still the same matt i subbed to so many years ago. I hope that if matt reads any negative comments that he ends his day reading this one. Love ya matt, keep being you

"You need to turn counter clockwise" *Turns clockwise

That Wells Fargo lock is sick. Super cool seeing that.

Your intro is MATTGICAL!!

I always knew matt was part wizard!! Finally the truth revealed.

I love how Baddie is rubbing off on you when you said "counter" clockwise, but you went clockwise on that first lock.

youre going harddd on the edits i love it

I love your intros. This one was top tier for sure!

Have always wanted one of those Berettas. One of the best non AR15 alternatives

I've had an ARX100 for years, and I do enjoy shooting it. There is a slip-on extended charging handle you can get that eliminates the knuckle-bump while charging the weapon. They did make other barrels for this rifle (even a 10.5" version!) but most of those were only available overseas. But if even a quarter of the Demolitia were to buy one of these rifles, you'd see Beretta import those other barrels pretty stinking quick.

I have that exact same Henry lever action, it’s really nice 👍

That intro was the most flawless edits I've seen even the leaves swaying are perfect

I’m honestly surprised that the mighty 9mm didn’t go straight through the locks. After all, “it blows the lung out of the body”-joe

2:47 am here in Aus and I'm just getting up for work, but I guess I'll stay in bed for a few more minute to watch this hahaha

I have the Beretta in .22 and it's one of my favorite guns... So much fun to shoot,

LOL the Keys for the old antique lock bit had me crackin up. "which one is it"? LOL!

Matt, you have to collab with the lock picking lawyer… his knowledge, your demolition, great content.

I just had my ARX-100 cerakoted in Digital Camo. Green/FDE/Black. They actually great weapons, i was not a fan at first but man once i threw a Sightmark M-spec, a inforce weapons light, and of course the new camo, i am in love!

Kentucky ballistics you a trooper man. I have a lot or respect for you ✊⛑

11:57 dude that looks so cool when it fires 🔥

As a lock collector, I was cringing so far watching him beat the key into the lock, awesome video as always though! Long live the Demolitia!

The editing in the intro was top notch. I know that there’s a sneaky cut somewhere in there, but I couldn’t find it, and can only guess that you masked it with the truck. That’s some Hollywood quality shit there!

I live in Austin. Gunna head out to Bunker Branding finally soon. I love this channel and I feel a good way to support it is to load up on some merch. Keep up the good work!

The special effects in the intro were on point! Well all of them actually 👍

Matt: "I assume you can get can get some other calibers like 300 Blackout probably." ARX Owners: "Oh, my sweet summer child"

“And you turn this piece counterclockwise” *proceeds to unscrew clockwise* Yes Matt, you are definitely a Hufflepuff.

Stellar edits

Спасибо за творчество! Привет из Башкирии)

After ALLLLLLLLLL these years you STILL find ways to be interesting, fun, clever . Bravo sir..... 👏🏿👏🏿👏🏿👏🏿Bravo!

Man that's really hard to believe because from what I heard recently about how damn powerful that lung blower 9mm is that it can be such a potent load that it'll straight blow your damn lung straight outta your body but yet that 9mm didn't even seem to put a dent in any of those locks and I just can't believe that something so lung blowin powerful didn't even come close to denting any of those locks man science is hella confusing that's all I know haha🤔

i love these lock shooting videos.

It's crazy watching u grow. U used to be a kid like me, now ur my granpapppy.

Got an ARX while in the army (we were one of the first regiments to get it). It was amazingly light compared to the previous standard issued rifle (ar70/90). Had lot of fun with it until the Sgt said "meh, you know what? You get the SAW." Was pissed for a while but then found the beauty in it.

The real bravery in the intro was walking around the range barefoot...

Best intro in a long time, that was great

"Lets shoot everything with something bigger" #1 Reason why I subscribed

that was some good editing. didn't even see the cut from the intro when the truck flew by. well done!

Matt’s local gun shop probably watched his video where he showed his whole collection and now gets in every firearm they didn’t see. Cause they know they’ll sell it! 😜😂

Not surprised that the lock that the military uses is hard to get the key in/out of. That's been my experience with all locks I've used in the Army back when. :P

Editor got some skills, this masking and blend looks almost flawless.

Oh that was glorious! Interesting thing though: the first two locks are basically ruined now, but the Wells Fargo lock can probably be saved. All you would need is a propane torch, a 3 pound sledgehammer, and some JB Weld.

"It has an interchangeable barrels, so maybe you can get it in 300 black out" Me shedding a tear: you would think

Good job hittin’ the wood! 8:36

I love the look of that gun I think thats the coolest one ive seen

Matt- spends years shooting several hundred different items...still surprised by how hot the rounds are when he finds them after penetrating the target!

"Let's shoot everything with something bigger" Pretty good quote Matt ;-)

No matter how down I am from work or banging Heads with the wife I'm so glad to watch your channel.

Dude, you searching for the key to that giant padlock for some reason...😂 just got me!!

It will take a MagPul E mag. E mags are designed for the weird Euro 5.56 guns which have a slimmer mag wells. You can also just sand down the little horns on a standard Pmag.

As soon as I seen Matt in the chains I said “Mere has finally had enough” “He’s going in the ocean with cement shoes”

The start of the intro reminded me of old RU-vid. Thank you. It had me laughing.

Pretty good transition when the trucks comes in the beginning lol

Is no one going to mention the fact that that intro was amazingly done. Well done Matt.

5:00 if i remember right. that "lock" is rly easy to bypass with tools. "after checking. yes, u can beat that "lock" with only strip of sandpaper and pliers" and im sure u can just hammer in a socket and wrench it open

"Alright, let's go number 2." Hahaha. Well said. Happy Friday!!!

Loved the arx in bf4