Тёмный

Advanced Meshtastic - Radio Configuration Part 1 

The Comms Channel
Подписаться 31 тыс.
Просмотров 28 тыс.
50% 1

Welcome to the first video in the Advanced Meshtastic Series. The Getting Started with Meshtastic Series was to get you up and running with a basic setting, but in this series we'll be getting into some of the more advanced things you can do with Meshtastic. For today's video, we'll be going over the Radio Configuration.
🛒 US Based Store with Meshtastic Supplies 🛒
store.rokland.com/pages/mesht...
👍SUPPORT👍
If you're finding the videos informative and useful, please consider supporting TC² ☕
ko-fi.com/thecommschannel

Наука

Опубликовано:

 

15 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 115   
@Trains-With-Shane
@Trains-With-Shane 15 дней назад
Less than 2 minutes into the video and already got the info I was hoping to find. Being able to set "Friendly" names for devices so I don't have to know who's texting from a random string of numbers and letter, lol. Skilling up on knowledge before I buy a few devices to set up my own network. Your channel has been incredibly helpful!
@The_Comms_Channel
@The_Comms_Channel 9 дней назад
Glad I could help!
@levigruffydh6913
@levigruffydh6913 4 месяца назад
I sooo appreciate the effort you have put into teaching us! You have saved me a ton of money and mental anguish.
@scottleggejr
@scottleggejr 25 дней назад
The video I've been looking for!!! Love the series. Keep em coming!!!
@Poorehouse
@Poorehouse 5 месяцев назад
Your series finally kicked me over the edge and I got my first Haltec units last week. Their coil antennas suck, so now I’m looking for cheap/but good enough antenna replacements. Couldn’t even get 300M LoS with them. Looking forward to more in the series!
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Nice! Yeah, I don't think any of them have great stock antennas and it's usually the first thing I recommend people upgrade.
@dominichayes9808
@dominichayes9808 5 месяцев назад
If you mean the small coil antenna on the board that's only for Bluetooth and WiFi. My Heltec came with a 1/4 wave stub on a 50ohm connector (I don't remember the name but it's the common one).
@OH2023-cj9if
@OH2023-cj9if Месяц назад
Look for Paradar antennas and liw loss coax. You will need them outdoors high up.
@hooks4638
@hooks4638 5 месяцев назад
Great channel and Great series! I love when a new video comes out.
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Glad you enjoy it! More to come!
@HouseholdDog
@HouseholdDog 4 месяца назад
You are creating very informative and helpful reference. Thankyou.
@MyTube4Utoo
@MyTube4Utoo 3 месяца назад
*EXCELLENT* content. Thank you.
@InVinoVeritas.
@InVinoVeritas. 5 месяцев назад
Great video & series!! Looking forward to getting my 1st mashtastic device in 2024, probably the LilyGo Echo & then smartwatch. Can't wait for review of the latter. Thanks again!!
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Thank you! That's awesome and I hope the videos are helpful when they come in!
@dominichayes9808
@dominichayes9808 5 месяцев назад
Indeed, very useful. Many thanks.
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Sure thing! I'm glad the video was helpful!
@ronfarmery
@ronfarmery 5 месяцев назад
Excellent! Thank you.
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Sure thing!
@TangoOscarMikeN3WS
@TangoOscarMikeN3WS 5 месяцев назад
Looking forward to this series. Very helpful information.
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
I'm glad you're finding it helpful! More to come!
@xraymarklive
@xraymarklive 5 месяцев назад
Great video, thanks for all your help. Really appreciate it
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Happy to help!
@renevelez9444
@renevelez9444 4 месяца назад
Thanks - Great overview!
@The_Comms_Channel
@The_Comms_Channel 4 месяца назад
Sure thing! Glad it was helpful!
@RoguePlank
@RoguePlank 5 месяцев назад
Excellent
@gllama3821
@gllama3821 5 месяцев назад
Thanks, TCC!
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Sure thing, DGL!
@dkerlee
@dkerlee 2 месяца назад
that CLIENT_MUTE mode was exactly what I was looking for, thanks!
@The_Comms_Channel
@The_Comms_Channel Месяц назад
Sure thing!
@calebberry6720
@calebberry6720 5 месяцев назад
Thank you for these series! I’m learning so much and I want to feel well rounded in my knowledge before I purchase a few devices. My hope is to create a network over the span of an 80 mile valley with mountains to communicate with family in emergencies, but not rely on HAM radios or my family having any deep technical knowledge to communicate. That’s why I think meshtastic is so unique. All I will need to do is train my family on what settings to have turned on, and what channel to text in.
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Sure thing! I'm glad you're learning and finding the series helpful! That's a great use-case and one of the reasons I'm a fan of Meshtastic. It's hard to get people to get a ham license or learn how to use radios and this is a great simple to use alternative.
@ihn
@ihn 5 месяцев назад
Great stuff, thank you for sharing
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Sure thing! Glad you found the video useful!
@ihn
@ihn 5 месяцев назад
@@The_Comms_Channel can not wait for part 2
@andrewhofmann5453
@andrewhofmann5453 5 месяцев назад
Oh this is good stuff! Keep it up!
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Appreciate it! Will do!!
@andrea_woodsman
@andrea_woodsman 3 месяца назад
Sooo useful!! Thanks a lot! I'm playing part 2 in SECONDS from now 🗿
@The_Comms_Channel
@The_Comms_Channel 3 месяца назад
Sure thing! I'm glad the videos are helpful!
@jameshall5314
@jameshall5314 5 месяцев назад
love these videos they helped me get started with my tbeams. keep them coming
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Thanks! I'm glad you're enjoying the videos and finding them helpful! More to come!
@crackerwood661
@crackerwood661 5 месяцев назад
Thanks!
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Thank you so much for the support!
@KiLLaDaTa
@KiLLaDaTa 5 месяцев назад
LET'S GOOOOO!!!!❤❤
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Nerd time!!
@KiLLaDaTa
@KiLLaDaTa 5 месяцев назад
😂
@JohnJohn-nk8wt
@JohnJohn-nk8wt 5 месяцев назад
wow great thanks!!
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Sure thing!! Glad you enjoyed the video!
@ramonbennett8416
@ramonbennett8416 2 месяца назад
Awesome
@EpiclyReckless
@EpiclyReckless 5 месяцев назад
Finally someone can explain the settings to me 😂 after I have 5 nodes installed across the valley
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
😂
@crackerwood661
@crackerwood661 5 месяцев назад
Thank you sir for the video
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Sure thing! More to come!
@paullee107
@paullee107 Месяц назад
Loving the advanced playlist however a suggestion; put 'advanced meshtasric' AFTER the video topic as on a phone you can't easily tell what each video is about. Yer teaching me all the things I wanna know after basic setup of a node - thanks. Hoping I find MQTT infos. Hate how the phone apps don't like controlling more than one node, but you just showed me how to use the web app for a 2nd; can the web app successfully control multiple nodes??
@KH07734
@KH07734 Месяц назад
I figured out how to create a private channel and use my phone camera to add them to the existing nodes I have. Real cool.
@markaz2kk
@markaz2kk 5 месяцев назад
I noticed on the pcb board that these meshtastic work on. The “L” and the “H” when swapped, jump either to 433-470ish Megahertz to 858 to 929MHZ . just in case people have bought the wrong one can swap it over. I got stuck with it being the 929 and changed the pass through the resistor. Now I can use it multiple times areas. Making sure to wipe it after changing it immediately otherwise it will freeze.
@TomSmith-eq1vr
@TomSmith-eq1vr 5 месяцев назад
Thanks
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Sure thing! Thank you for the continued support!
@TomSmith-eq1vr
@TomSmith-eq1vr 5 месяцев назад
You have created alot of valuable content! Helping this community grow!
@OH2023-cj9if
@OH2023-cj9if Месяц назад
WiFi on the heltec v3 is about 30ft, it's bad. So put it near a spare wifi point, then connect the board to the router. That allows you to use a Web browser from any PC browser or phone app. Or connect back home via vpn and remote control the heltec.
@bobyrd74
@bobyrd74 4 месяца назад
Understanding channel encryption is easy since each channel gets it own PSK. But what about when you DM directly between nodes? Is that considered "Primary" channel and thus would use the primary PSK?
@gtorres1719
@gtorres1719 Месяц назад
I'm testing range, What's the lowest you would set your Broadcast interval to? Can I do 60 seconds?
@Wayne-Pr
@Wayne-Pr 5 месяцев назад
Thanks for the video I'm about to get into Meshtastic in 2024. My question is assuming that this is being done by Bluetooth what stops someone else from accessing your device settings.
@ryanb9395
@ryanb9395 5 месяцев назад
They would have to be physically close to the device and know your Bluetooth pin
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Bluetooth has a max range of about 300 feet so they would have to be close enough to connect and would have to have your pin as Ryan suggested. You can also turn off Bluetooth for devices that are just acting as routers/repeaters. Thanks for the question!
@Wayne-Pr
@Wayne-Pr 5 месяцев назад
Thanks @@The_Comms_Channel I must have missed the part about the PIN.
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
@@Wayne-Pr Sure thing! Good luck with your setup and feel free to reach out if you have any questions!
@tylerpienta
@tylerpienta 5 месяцев назад
so im assuming adding other devices to your private channel just involves copy/paste encryption key and name?
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
The easiest way is to have the other devices scan the QR code on the channel tab
@Teeurbo
@Teeurbo Месяц назад
Do you have any idea of what the actual power consumption of each of the modes is? To accurately size Solar and Battery sizes
@OH2023-cj9if
@OH2023-cj9if Месяц назад
A 2000mAH liPO lasts 2days on mine.
@Teeurbo
@Teeurbo Месяц назад
@@OH2023-cj9if What hardware are you using?
@KH07734
@KH07734 Месяц назад
If you have done the homework, what's the diff between Ham and no Ham other than encryption being off by law. Higher power, etc.? or just encryption toggle? also, I get an Implicant ack when contacting others. Is there a channel that should be used just for public?
@The_Comms_Channel
@The_Comms_Channel Месяц назад
Just allows for more power and turns encryption off. The default "LongFast" channel is the public default.
@KH07734
@KH07734 Месяц назад
@@The_Comms_ChannelI tested this but found no more power tx other than before I added my call sign. I also am looking at shifting the freq to move it off the public and make it more private. Not sure if the LoRa devices self adjust to rx the signal if in the band or not. So much to learn here and it’s actually fun.
@The_Comms_Channel
@The_Comms_Channel Месяц назад
@@KH07734 That will depend on the device you're using. Most devices are using a SX1262 which has a max of 22dBm. There are some devices out there like the Station G1 that have a power amplifier.
@geemoney6742
@geemoney6742 5 месяцев назад
UGH .. I need help .. I accidently locked my T-Echo without having ADMIN access. I need help factory resetting it but another video I watched had me lost with trying to install PYTHON programming and so forth. Felt like I was trying to launch a space shuttle. Can you help with this?
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
No worries. I would just go through the firmware flashing process and that will get you back to factory defaults.
@memyselfandi8544
@memyselfandi8544 5 месяцев назад
What is the encryption key for LongFast?
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
AQ==
@salsepulveda494
@salsepulveda494 3 месяца назад
I have two Heltec V3 boards set up with Meshtastic. However, one device has a circle with a question mark. The other device does not have this question mark. What does the question mark mean?
@ChrisC-fp9qu
@ChrisC-fp9qu Месяц назад
Hello I just got 2 Heltec V3 nodes, and im currently learning about it. From what I know, the circle with the question mark is GPS. Most don't have GPS but GPS can be added so if no GPS you get Question Mark ?. When your using the meshtastic app you have a choice to direct your phone GPS to the node and then an arrow will appear in place of the question mark.
@salsepulveda494
@salsepulveda494 Месяц назад
@@ChrisC-fp9qu Thank you for explaining that. All my devices are Heltec V3 - no GPS.
@ChrisC-fp9qu
@ChrisC-fp9qu Месяц назад
@salsepulveda494 Good luck and enjoy.
@merican3789
@merican3789 5 месяцев назад
Any advice on a wis block PIN code? Got everything flashed to the wis block and got ready to connect via the app, keeps asking for a PIN code and timing out, can’t find a pic anywhere.
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Default PIN code for devices with no screen is 123456
@merican3789
@merican3789 5 месяцев назад
@@The_Comms_Channel thanks!
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
@@merican3789 Sure thing!
@ai7nc
@ai7nc 4 месяца назад
Anybody using AREDN to bridge meshtastic devices via MQTT?
@TheSpuggiehawk
@TheSpuggiehawk 4 месяца назад
I've seen longnames with flag icons in them. How is that done?
@The_Comms_Channel
@The_Comms_Channel 4 месяца назад
You can use emojis in long names 🚩
@TheSpuggiehawk
@TheSpuggiehawk 4 месяца назад
@@The_Comms_Channel Aha! Thanks :-) I thought there would be a text sequence like :flag_gb:, but I found a site where I could copy the required characters.
@The_Comms_Channel
@The_Comms_Channel 4 месяца назад
Sure thing!
@raughboy188
@raughboy188 2 месяца назад
I have another idea that can put meshtastic to good use. Aside from allowing you to communicate over long distances in areas where you don't have cell service or other signals meshtastic can be use to communicate with people during crysis of any kind. Using meshtastic that way would certanly show meshtastic and lora in general in better light. I know i'd use it the way i described it.
@joecizin9357
@joecizin9357 5 месяцев назад
So I'm guessing everyone has watched "Leave the World Behind" 😁😁
@laxxindude
@laxxindude 5 месяцев назад
That movie was ass
@mediocreman2
@mediocreman2 2 месяца назад
My app won't even connect to the device, even from different phones. But the phone and the app see the Bluetooth device. So now I have to try flashing the firmware I guess and hope for the best. Even though they were supposed to be ready to use. This is going to make adoption slow.
@davidalan2469
@davidalan2469 5 месяцев назад
This is similar to AES IntelliNet Radios used for burglary and fire alarms. I had a job 20 years ago in Chicago Lincoln Park and I did an unorthodox install of 2 radios in one house with the repeating turned off on the basement radio that was connected to the alarm control and a second radio installed in the top floor to get the signal out on the AES network. Also did you ever look at the Motorola Talkabout radios that are doing a similar text over radio feature?
@The_Comms_Channel
@The_Comms_Channel 4 месяца назад
Yep, I have a pair of those. They work great!
@LiminalToilet
@LiminalToilet 2 месяца назад
Could I set a meshtastic device to share its position only through ATAK without that device being tethered to the persons phone? For example I need to have the ability to display a persons location in ATAK but the person doesnt have a phone or cant be bothered to download and understand ATAK. How could i work this problem?
@The_Comms_Channel
@The_Comms_Channel 2 месяца назад
You would want to use a Meshtastic device with a hardware GPS.
@user-ly5yn9ly8r
@user-ly5yn9ly8r 3 месяца назад
Thanks!
@The_Comms_Channel
@The_Comms_Channel 3 месяца назад
Thank you so much for the support!
@levigruffydh6913
@levigruffydh6913 4 месяца назад
Thanks!
@The_Comms_Channel
@The_Comms_Channel 4 месяца назад
Sure thing! Thank you so much for the support!
@FLPanhandle
@FLPanhandle 3 месяца назад
Thanks!
@The_Comms_Channel
@The_Comms_Channel 3 месяца назад
Thanks for the support!
@Zipnsmack
@Zipnsmack 3 месяца назад
Thanks!
@The_Comms_Channel
@The_Comms_Channel 3 месяца назад
Thank you so much for the support!
@RebelAsteroid
@RebelAsteroid 5 месяцев назад
Thanks!
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Thank you so much for the support!
@JD_Manufacturing
@JD_Manufacturing 5 месяцев назад
Thanks!
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Sure thing! Thanks for the continued support!!
@EpiclyReckless
@EpiclyReckless 5 месяцев назад
Thanks!
@The_Comms_Channel
@The_Comms_Channel 5 месяцев назад
Sure thing! Thank you for the support!!
Далее
Advanced Meshtastic - Radio Configuration Part 2
9:26
3 wheeler new bike fitting
00:19
Просмотров 17 млн
Tipuan Jenius dalam Mengasuh Anak & Gadget Cerdas
00:21
LoRa - Long-Range Radio for IoT | Arduino, ESP32, RPI Pico
1:07:58
You Will Want this Ham Dashboard
18:47
Просмотров 20 тыс.
Meshtastic settings
5:15
Просмотров 5 тыс.
Follow These 10 Tips To Be A Meshtastic Pro!
8:17
Просмотров 48 тыс.
Advanced Meshtastic - Protecting your GPS location
9:21
Advanced Meshtastic - LoRa Configuration
12:53
Просмотров 19 тыс.
MESHTASTIC JUST KEEPS BLOWING MY MIND!!!
11:54
Просмотров 53 тыс.
keren sih #iphone #apple
0:16
Просмотров 1,6 млн
ПОКУПКА ТЕЛЕФОНА С АВИТО?🤭
1:00
Купил этот ваш VR.
37:21
Просмотров 200 тыс.