Air Compressor Oil Change--Extend the Life of your Air Compressor

Подписаться 3,2 млн

Просмотров 263 тыс.

50% 1

Easy "how to" video on changing the oil in an air compressor. Highly recommend changing the oil on your air compressor, assuming it's not an "oiless" system at the appropriate service interval. This will extend the life of your equipment.
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/31aince
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

Хобби

Опубликовано:

30 мар 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 656

@Owl-ge9jl 4 года назад

It's absolutely amazing that even your older videos had this much quality. Straight to the point, and very information filled. Thanks for making great content!

@ProjectFarm 4 года назад

Glad to hear! Thanks for watching.

@StoneysWorkshop 4 года назад

What a gem seeing this video now after watching your modern content. You’ve really become comfortable in front of the camera now! Also, Thank you for your service!

@ProjectFarm 4 года назад

Thank you very much!

@ditship 2 месяца назад

Been watching your videos for about 4 years now. I have an old compressor I wanted to maintenance so typed that into youtube and by golly here is one of my favorite youtubers telling me how to do it. Happy to watch and as always quality work sir!

@ProjectFarm 2 месяца назад

Thanks and you are welcome!

@miket5506 2 года назад

Thanks for sharing! I inherited an air compressor when my uncle passed away a couple of years ago and finally got around to setting it up because I finally have a use for it. Definitely want to change the oil just as a preventive measure. Seems pretty straightforward-just need to find the oil drain on mine. Side note, I’ve been watching your channel for a few years but I somehow never knew you were in the military. Thank you for your service! And, as always, thanks for all the great videos!

@ProjectFarm 2 года назад

Thanks and you are welcome!

@guymee 3 месяца назад

To me this looks like the first current form video, the stance, the angle to the camera Only real difference is your comfort talking consisntely and your slowly developed voice cadence and video pace This is still incredibly high quality

@ProjectFarm 3 месяца назад

Thanks!

@ryanhyduke5937 7 лет назад

Thank you for your service.

@ProjectFarm 7 лет назад

Ryan, Thank you for supporting those of us serving!

@nathanwest2304 4 года назад

I've been watching your videos for years now, and I always was kinda curious what you did for a living knowing you are in the military cleared a few things up keep up the good work and thank you for being awesome

@ProjectFarm 4 года назад

Thank you very much! After the military, I purchased a small farm and am trying to get it back in shape along with making videos. My wife works and we keep our spending within reason so we're able to have more family time together. Thanks again!

@TheEgg185 4 года назад

It explains the haircut. I always thought that it looked like a military haircut.

@JustinCase380 3 года назад

lol, the first time I saw one of his video's I immediately thought "This guy reminds me of many commissioned officers I've met" from mannerisms, bearing and attention to detail. Sometimes I thought "This sounds like he's reading from a field manual". I was not surprised when he said he was in the military. Thank you for your service! Were you commissioned?

@clintwilmeth3514 3 года назад

@@ProjectFarm I suspected you were military, I'm also a veteran. Which branch?

@oblivion._.8294 2 года назад

Crazy to see how I watch every video of yours that gets recommended to me. Your confidence when making videos is the only thing that has changed. The information in your videos is amazing. Thank you for your videos.

@ProjectFarm 2 года назад

That's awesome!

@WorkOnP38 7 лет назад

Thanks for the plastic bag and funnel tip. Great tip I'll start using too. Watched a lot of your videos and really enjoyed them. Keep up the great work.

@Bill-th5bd 2 месяца назад

First and foremost THANK YOU for your service! Great retro video. Awesome to see how you've grown comfortable with the camera over the years. Keep em comin.

@ProjectFarm 2 месяца назад

Thanks! Thanks, will do!

@anklebiterwoodworks2818 2 года назад

Thank you so much for putting this video out.Have the same compressor and this was the first time I had done any oil change. Yes, let it go way to long without realizing and ran it out of oil. Thankfully it was caught before any damage, but had seized a bit. Had to hand crank a bit to get the oil moving again, but worked great afterwards. Thanks again!

@ProjectFarm 2 года назад

You are welcome! Thanks for sharing! Glad to hear all ended well!

@peterbiere9384 2 года назад

Your videos have come a long way since 5 years ago. I joined this chanel maybe a year ago give or take. Excellent video as always. Would love to see more of these types of videos where you work around the shop! Things I learned in this video that I never knew. 1. Your were in the military. 2. You're a family man. Wow. A True American hero! THANK YOU FOR YOUR SERVICE! I AM HONORED TO BE A MEMBER OF THIS GREAT CHANEL.

@ProjectFarm 2 года назад

Thanks so much! Thanks for the suggestion.

@geocube1898 5 лет назад

More of these how to videos please! I love the product comparisons, but I adore mechanical and carpentry how to's!

@ProjectFarm 5 лет назад

Thank you for the recommendation!

@timgreenshields2431 3 года назад

Neat video, good explanation, and thank you for not having loud music on it ! Overall, just great !

@ProjectFarm 3 года назад

Thank you!

@zackstewart4109 6 лет назад

Haha I watch your show all the time and love it. Today I needed to change the compressor oil at work and look who pops up in the youtube search! Awesome.

@ProjectFarm 6 лет назад

Thank you! Glad this video helped.

@blackout7615 4 месяца назад

All your videoa are worth watching a few times. Even these old ones. Thank you for the time you put into all that you do. And thank you for your service!

@ProjectFarm 4 месяца назад

Thanks and you are welcome!

@JC-dt7jv 2 месяца назад

At what time did he mention his military service? Just curious, I didn't remember him saying it.

@gregoutdoorsman4598 7 лет назад

A big thank you for your service to our country! Your videos are great, keep them coming!

@JakeKennes 7 лет назад

Nice info. When removing the drain bolt, the copper tube it is bolted into should not detach but stay screwed onto the bottom of the compressor. Hold the copper tube in place with a vice grip (do not clamp down too much), while removing the drain bolt. That should allow you to have more of a drain pipe closer to the edge and lessen chances for a spill. If the copper pipe unscrews anyway, then remove bolt once it is all out and refit the copper tube onto the compressor with thread sealer. Then replace drain bolt with new and soft gasket and gently tighten so this will be the one to come out next time.

@JHNielson4851 4 года назад

I would replace the tub or pipe with a longer one. I've done this on a couple of engines to make oil changes easier the next time.

@patrickmorrissey2271 5 лет назад

Thank you for your service Sir. I've done that forever with bags... I stand up the funnel, and put the bag over it, open side down, like a parachute.... Keeps the funnel clean... Never seen anyone else do that until now.

@ProjectFarm 5 лет назад

Thank you!

@davidsmeltser2236 5 лет назад

Thank you for your service and all the awesome videos you put out greatly appreciate them!

@ProjectFarm 5 лет назад

Thank you very much!

@jeremyluckadoo6092 5 лет назад

I really enjoy your videos. Thank you for doing them and most importantly, thank you sir for your service.

@ProjectFarm 5 лет назад

Thank you very much!

@RANDALLOLOGY 5 лет назад

I have watches a ton of your videos and did thumbs up on every one. This is the only one I heard you mention of being in the military. At that point I decided to subscribe. And is everyone else has posted from a month ago to a year ago, thank you for your service.

@ProjectFarm 5 лет назад

Thank you very much for the positive comment! I was in the military when I published this video and really enjoyed my time in the military. It's great to finally plant roots here in Missouri and to have a place that I can call home for more than a couple of years. Thanks again.

@TheSprinterVan 5 лет назад

Nice little how-to video, thank you I like the idea about the cardboard to guide the old oil. And also the idea about reusing the old grocery bags. Always good to hear some new shortcuts and tips👍

@ProjectFarm 5 лет назад

Thank you!

@MegaScubasteve420 4 года назад

Its amazing the progress u made on your videos in 3 years. Very helpful video as always

@ProjectFarm 4 года назад

Thanks a ton!

@megadeth1763 3 года назад

Everything you show here is helpful. You are so appreciated. Thank you.

@ProjectFarm 3 года назад

You are so welcome!

@dustondoesit3913 3 года назад

Even 3 years ago you made videos that I'm thrilled to find. Just got an oiled 2007 twin tank 4-gallon craftsman air compressor for free! The old oil was very thick and dark, just put in new oil, can't wait to fire her up and see how it runs!

@ProjectFarm 3 года назад

That is awesome!

@dalltex 7 лет назад

Install a pipe into the screw hole and put a cap on the end to extend the length of the drain. That oil did look bad- nice job keeping your equipment well maintained. Hope they drained the tank regularly!

@ProjectFarm 7 лет назад

Great suggestion! I agree...the tank was empty when I purchased the home. Thanks for watching the video and commenting!

@xbrandon502x 5 лет назад

I've done that as well. On other requirement I've installed valves to make it a tool less job if it's something that gets changed often.

@LAP1050 4 года назад

Yep, I did that to mine and definitely makes draining the oil a much easier and cleaner.

@bigflood2009 4 года назад

Did that same thing on mine as well.

@alaskanken2132 4 года назад

@@xbrandon502x you just gave me an idea you can GB o a step further and put a ball valve with a down spout for quick oil changes . Maybe a bit overkill but it would make the oil changes a breeze for the future.

@ianmccoy1999 4 года назад

Great tip on storing the funnels.

@keithlincicum3691 5 лет назад

Hi PF, Great video!! I just retired from a farm and ranch store and we sell a very good "blue" compressor made in the USA. When ever I would sell one, I would show the customer the maintenance kit we stocked. Even at close to $100. for the big kit, it was a easy sell. The compressor had a 5 year warranty but with the kit, they got another 2 years. Maintenance is important. KL

@ProjectFarm 5 лет назад

Thank you! That kit sounds like a great deal!

@konradsky8978 2 года назад

Props to this dude. Still reads and replies to comments on 4 year old videos. This and many other reasons (such as his refusal for sponsors and staying independent) is why I originally subscribed and will continue to support his channel. Great work! Keep it up!

@ProjectFarm 2 года назад

Thanks, will do!

@NSXTACY420 5 лет назад

Project Farm I would love to see you do a video on comparing air compressor oil. Like Ingersoll Rand synthetic, Jenny Ultimate blue syn., Rol-Air Synthetic blend, Amsoil Synthetic, Mag1 oil, Central Pneumatic oil, and others. You do such a good job with putting them to the test.

@ProjectFarm 5 лет назад

Thank you for the video idea!

@montyholland3357 4 года назад

I definitely agree. JUST bought a brand-new pulsar compressor. Went to and did the cold start after adding the suggested amount of oil they sent. Milkshaked instantly. And there was way more oil coming out then I put in Flushing with napa air compressor oil, then finish my break in run. Redrain and refill.

@stanleyphillips2515 5 лет назад

Thank you for your service. Enjoy your videos.

@ProjectFarm 5 лет назад

Thank you very much!

@mattsaehlenou2810 2 года назад

Oldie but goodie! About to change mine now. Awesome videos! Cool to see an "older" one. Thankyou for your service!!! 🇺🇸

@ProjectFarm 2 года назад

You are welcome!

@isaiahshaffer 6 лет назад

Thanks for your service, always enjoy your videos too!

@ProjectFarm 6 лет назад

Thank you for the positive comment!

@bryanhoward226 4 года назад

Thank you for your service! Seeing this video reminded me its time to change the oil in my compressor

@ProjectFarm 4 года назад

Glad it helped!

@gmcjetpilot Год назад

I happened to get this from googling air compressor oil change. I am know your newer videos well, doing side by side comparisons. Your quality and subject matter has improved, but this was handy. I am going to synthetic on my compressor.

@ProjectFarm Год назад

Thanks for watching!

@bullwinklemoose9574 2 года назад

Just did that myself on my v-twin compressor. All the research I found recommended synthetic compressor oil (30 wt non-detergent engine oil for emergency only & 1/2 up the sight window). Appreciate your work.

@ProjectFarm 2 года назад

Thanks!

@gregkimura5906 3 года назад

Great video! As a quick story, the first time I added oil to my compressor, I didn't know about the sight glass. I overfilled it so much that oil came out of the muffler when I turned it on. Oil splashed all over the place and I shut it down quickly. I drained the oil and I'm thinking that I didn't do any damage, since it ran for only seconds. I learned a huge lesson and I now know about the sight glass. Thanks for sharing!

@ProjectFarm 3 года назад

Thanks for the feedback.

@danielwlyles Год назад

Thank you for this video. I don't have the exact compressor but the basics about it really helped me understand things with mine.

@vlo9079 3 года назад

Thank you for the how-to video. This answered many of my questions

@ProjectFarm 3 года назад

Glad it was helpful!

@dannyprater7687 6 лет назад

Thank you for your service. I love your channel man.

@ProjectFarm 6 лет назад

Thank you!

@jonbeltran7650 7 лет назад

great video, and thank you for your service

@ProjectFarm 6 лет назад

Jonathan, thanks for the positive comment regarding the video and thanks for supporting those who serve!

@CSX4772 4 года назад

Thanks for your service, sir. What branch?

@ayebee1207 3 года назад

@@ProjectFarm Hi Sir; I know you try to answer replies. I am somewhat concerned that HF is selling "Oil less compressors" In large size format of 20 gallon. I have taken apart dead, cheap 12v tire inflaters and found metal piston in a plastic cylinder. I get the cheap, get what you pay for. But to me, I think they are selling 20 gallon air tanks for $200. How durable could they be. I sure hope the thermal overload kicks in, when a seized compressor becomes an electrical dead short, fire hazard.

@michaellinner7772 5 лет назад

Thanks for the info. It's a good tip for the home mechanic.

@ProjectFarm 5 лет назад

Thank you!! I'm still very happy with the LEDs. Highly recommend them.

@nikthegreek844 4 года назад

Now it is clear to me!!! I had to watch so many videos of yours to hear you say you are a service man. 🙂. Im in service to!!!! And i like to do stuff like you!!! Be well and do your magic!!!

@ProjectFarm 4 года назад

Thanks for your service! Glad to hear!

@evojigger 6 лет назад

Excellent tip, think its something people overlook with compressors. With my compressor, its a big 3 cylinder one, I do a lot of car bodywork so it works relatively hard, I have put some lucas stabilizer and zx1 extralube into the oil, those two have made a huge difference to the amount of oil coming down the lines into my filters, almost none now, and before the electric motor would trip the inbuilt trip switch trying to start from cold when the temps got near freezing, now it starts right up no problem.

@ProjectFarm 6 лет назад

Thanks for the positive comment!

@Erik_Swiger 5 лет назад

You mentioned heating your shop ... I'm a big fan of 250-watt heat lamps. You can use 6 of them for the same amount of power as a 1500-watt space heater and that will heat quite a large area. They're 90% efficient at creating heat because they heat the filament to 5,000 degrees, much hotter than the heating element in a space heater. And, they last virtually forever. Plus, they can be put on switches, or a thermostat, or even a dimmer (although they have a shorter life then). Just be sure to use a lamp holder rated for them, they have ceramic holders that can take the higher temperatures, available in any farm supply, or even Walmart.

@ProjectFarm 5 лет назад

This is a great recommendation! Thank you

@mileshoffhines1945 5 лет назад

Thank you for your service and informative videos.

@ProjectFarm 5 лет назад

Thank you!

@JehielOsmar 3 года назад

1:54, exactly what I was looking for. I'm about to change my compressor oil for the first time and was not sure whether I pour in the whole quart of oil or not. I guess this answered my question. Thanks a lot

@ProjectFarm 3 года назад

Glad I could help!

@TheMioAmico 2 месяца назад

Great video. The little window was painted over on my 82 compressor and I didn't know it existed. I cleaned it up and it is see through again.

@ProjectFarm 2 месяца назад

Thanks! Thanks for sharing.

@bobeeshc2166 Год назад

I have watched you for years now, and had already watched this way back (there was a red line under it so I would say I saw it) Anyway doing an oil change on mine, and you helpful in my life again. Thanks. By the way, your channel has come a long way from this video. I join you almost every Sunday afternoon now.

@ProjectFarm Год назад

You are welcome! Glad to hear!

@jameshanna8762 2 года назад

I came here to see a larger shop air compressor comparison. I saw the small tire inflator tests, but they don't give me much info that is applicable to a 10+ gallon compressor. I would love to see that as a future episode. Best channel, ever, so when I knew I needed one, I came here first.

@ProjectFarm 2 года назад

Thanks! Thanks for the video idea.

@justinchristiano8007 4 года назад

Very informative, as I have a very similar compressor. Thanks for the video, and than you for your service.

@ProjectFarm 4 года назад

Thank you very much!

@mrc3458 3 года назад

Just changed the oil in my Kobalt K7060V, 3.5hp, 60 gal. I could not find the capacity anywhere. Mine took 32 oz. I was glad to see that yours did also. I was starting to question my sight glass. Something else I did was check the air filter and the foam was starting to fall apart, glad I looked at it would of hated to suck deteriorated foam into the compressor. Thanks for the video.

@ProjectFarm 3 года назад

You are welcome!

@kc0jae 2 года назад

Thank you for your service!! Love your videos both new and old!

@ProjectFarm 2 года назад

Thanks and you are welcome!

@PcItalian 5 лет назад

Thank you for your service!!!

@ProjectFarm 5 лет назад

Thank you very much!

@SomeoneVx 5 лет назад

Holy cow. Ive watched a good amount of your videos and just kinda gathered you were older then AvE himself! But my gosh thank you for your service brother!! How long were you in the service? & Welcome to Missouri I myself Am born and raised in good Ol' Missouri!! Hell yeah. Definitely one of my top youtubers with AvE

@ProjectFarm 5 лет назад

Thank you very much! I was in for nearly 22 years. Thanks again!

@jwestrik9308 2 года назад

Thanks, I also bought a farm that had a compressor included in Ireland). I know a bit more now. I like your channel a lot.

@lelandharper2099 6 лет назад

Thank you for your service!

@ProjectFarm 6 лет назад

Thank you for supporting those who serve!

@randomguy93984 6 лет назад

I had no idea you were active military! Thanks for your service

@ProjectFarm 6 лет назад

Thank you for supporting those of us who serve. I officially retire on 28 Feb. Thanks again.

@darkegress4392 4 года назад

Great video and tips. Thank you for your service.

@ProjectFarm 4 года назад

Thank you very much!

@whip-its_dad4239 3 года назад

Hello , first thank you for your service . I have a similar machine from Husky / Home Depot and the manuel calls for 11.5 ounces . I splurged for the synthetic oil also . A tip for maintaining your compressor is to drain the water often . I sometimes leave the petcock open over night and youd be suprised what drains out ! Thank you for the great videos .

@ProjectFarm 3 года назад

You are welcome!

@jewllake 7 лет назад

Thanks for your service in the military. The oil in my air compressor all of sudden went to the top one day when I looked at it. I've read that if you don't use it much it creates condensation in the oil. Every now and then i open the air drain at the bottom and run it for a good 8 minutes or so to burn off all the condensation.

@kingfisher1ful 4 года назад

Realy enjoy your videos. Thanks for your service!

@ProjectFarm 4 года назад

Thank you

@zac8606 5 лет назад

Enjoy your channel. Thanks for your service

@ProjectFarm 5 лет назад

Thank you!

@virginia7125 3 года назад

I have a modified Hitachi nail gun compressor converted to a small shop compressor. The quick connect was changed out to automotive. Less air leaks. The plastic line to the gauges was changed to brass. An oiler was added to the compressor for air tools. Anti-vibration foam was added around the top to muffle noise. An electric cooling fan was added to the vent area on the compression piston. Basically, these are designed for nail guns, not shop tools. Has 4.2 cfms, runs all but some grinders & saws. 8 gallons means quick fill-up time. Now I'm running my compressor on 5W-40 euro synthetic motor oil. Runs great...

@ProjectFarm 3 года назад

Thanks for sharing.

@uvp5000 11 месяцев назад

I enjoyed watching this video as I have all the other installments. Thank you.

@ProjectFarm 11 месяцев назад

Thanks!

@davidmontgomery9570 3 года назад

Great video and thank you for your service 🇺🇸 you answered my question

@ProjectFarm 3 года назад

Glad to help!

@ronniehalsel5777 5 лет назад

Great video bud and thank you for your service

@ProjectFarm 5 лет назад

Thank you!

@donazzopardi2721 6 лет назад

Thanks for your service!

@ProjectFarm 6 лет назад

Thank you!

@ForbiddTV Год назад

I was looking to buy a air cleaner/water remover for my air system and thought of looking on your channel first. No luck, dang.

@ProjectFarm Год назад

Thanks for the suggestion.

@montyholland3357 4 года назад

Thank you for your service. Thank you for all these great videos

@ProjectFarm 4 года назад

You are welcome!

@montyholland3357 4 года назад

AATW!!!

@WayneWerner 2 года назад

That funnel tip was just as good as all your test videos!

@ProjectFarm 2 года назад

Thanks!

@danielscriver9726 7 лет назад

It's a good idea to stick a neodymium (N52 10mm x 10mm or so) to the outside of oil drain plug (even on the outside it will create a strong magnetic draw on the inside end of the plug bolt), OR permanently stick a larger N52 on the bottom of the oil pan.

@ProjectFarm 7 лет назад

Daniel, Thank you for the great suggestion! Thank you for watching the video and commenting!

@RRaucina 4 года назад

Manufacturers seem to use only ceramic magnets inside transmission pans. First reason being they are cheaper and second that they have much better heat resistance than rare earth. You will need to get temperature rated rare earth magnets for inside an oil pan and perhaps outside also. The bigger and more the better!

@MrRichard57000 3 года назад

can t argu with that!!!sometimes they put a few on a steel filterhousing

@cockasorrus7475 2 года назад

Dbl. triple bag them! 😎 Thank you for sharing your knowledge brudda!

@ProjectFarm 2 года назад

You are welcome!

@stevewall6811 5 лет назад

Been watching your videos even before I joined as well.

@ProjectFarm 5 лет назад

Thank you!

@billthompson9595 5 лет назад

great information! we all forget to look after our air compressors///Thank you

@ProjectFarm 5 лет назад

Thank you

@juiced71 4 года назад

Thank you for your service! My son was in the marines 👍🏻 hats off to ya and your family

@ProjectFarm 4 года назад

Thank you!

@raymorrison5006 5 лет назад

A little tip that might help on that oil change next time is if you find a piece of pipe you can thread it into that hole on the pump and put a cap on the end of a piece of pipe that would be an easier way to drain the oil and just leave the pipe attached to the pump

@ProjectFarm 5 лет назад

Great tip! Thank you

@raymorrison5006 5 лет назад

@@ProjectFarm your welcome

@BruceLyeg 6 лет назад

Good common sense tips that not everyone thinks of. Thanks for the video.

@ProjectFarm 6 лет назад

Thanks for the positive feedback!

@king_red_f3504 4 года назад

Love all your videos and thx for all the money you spend on for us and thx for your Service

@ProjectFarm 4 года назад

Thank you

@Jewelrymaker 4 года назад

I've been a long time subscriber. Even this early video is very informative. Thank you for your service, sir. Your channel has come a long way since this video! I wish you all the success it can bring!

@ProjectFarm 4 года назад

Thank you very much!

@TedTabaka Год назад

Thank you for this video! Helped me with maintaining my air compressor!

@ProjectFarm Год назад

You are welcome! Great to hear!

@extreemslayer 3 года назад

Thank you for your service

@ProjectFarm 3 года назад

You are welcome!

@mechaneil Год назад

Thanks for all your reviews. I was able to get the same air compressor recently, but in the process of loading it up on my truck, we had to tilt it on its side, which had the oil leak in the motor's mechanical parts, unfortunately even the electrical compononents. I will have to clean the oil off. Any suggestions on how to do it?

@Freddie2598 2 года назад

Great video again … I use Amsoil synthetic in my air compressor and also I use a empty gallon jug set it on the floor with a nail in the wall that I hang my funnel on and the tip of the funnel sticks in the jug to let it drain into that..

@ProjectFarm 2 года назад

Thanks! Thanks for the feedback.

@LAP1050 4 года назад

Good job 👍 with your tips, just subscribed to your channel. Thanks for sharing and for your service to the Nation 🇺🇸

@ProjectFarm 4 года назад

Thank you!

@capt2278 2 года назад

watched this dec 2021... you are still a great presenter.

@ProjectFarm 2 года назад

Thanks!

@Coletrain523 3 года назад

Your videos are great! keep up the good work with all your morden content. You should really make some more videos on air compressors. Like oiled vs non. See if harbor freight stands a chance. Even do some of those 5 in 1 mini compressors. That are jump packs, inverters, lights, etc. Looking forward to more videos!

@ProjectFarm 3 года назад

Thanks for the video idea.

@reconphil 6 лет назад

Thanks for your service. Would it have been better to open the filler then the drain to let the air help the drainage?

@ProjectFarm 6 лет назад

This is an excellent recommendation. Also, thank you for supporting those of us who serve.

@4runner4wd79 3 года назад

Awesome video bro. Thank you for your service.

@ProjectFarm 3 года назад

Much appreciated!

@garrettkellogg8278 6 лет назад

Thank you for your service sir

@ProjectFarm 6 лет назад

Thank you for your support. Wishing you and yours a Happy New Year.

@lewiemcneely9143 5 лет назад

Thanks fellow vet! I just rinsed mine with some gas and then put in some DElo. My compressor is very small, maybe 1 1/2 gallons so it didn't take buch. Sure come a long way since then. Thanks, Commander! A-PLUS!

@ProjectFarm 5 лет назад

Hi Lewie, Always great hearing from you and thanks for the positive comments! Great choice on oil. I'll likely do the same next time I change the compressor oil, which I need to do soon. Thanks again and wishing yall many Blessings!

@lewiemcneely9143 5 лет назад

@@ProjectFarm HI Commander and I know non-detergent oil has it's place but I'm not really comfortable in using it when a high detergent, high dispersant will keep the crud loose BUT it does have to be changed. Maybe they figure the non-detergent is for non-changers. Sounds reasonable. BLESSINGS 2 yall!

@avrel820 4 года назад

Nice little video i enjoyed it.. Remember to drain all compressor air tanks let out water due to condensation do it at least once a year

@ProjectFarm 4 года назад

Thank you

@elkhunter3382 3 года назад

I run synthetic engine oil in my air compressor, seems to work fine. Yes synthetic is much better for it to start in the cold weather.

@ProjectFarm 3 года назад

Thanks for sharing.

@oldcountryman2795 3 года назад

Yeah, I don’t think the detergent in motor oil would make any difference.

@coolruehle Год назад

Great idea with the funnel bags!!

@ProjectFarm Год назад

Thanks!

@roundman-1972 5 лет назад

i know this is an older video but im kinda new to channel, really love the stuff you do. here is my tip on oil changes. if the item is something you are going to keep. my dad and now i always change out the drain fittings to make it where it is easier and you dont get oil everywhere. linke on this compressor i would add a nipple and then a 90 down and the a pipe plug. that way you are clear of the frame. also i remove the water drain cock and put it out where i can get to it easy with a ball valve and a pie tin. i live in high humidity so i drain often.

@ProjectFarm 5 лет назад

Thank you!

@MrGetYouLoud 2 года назад

Ha! Vintage project farm! Loving that sh*t! Honestly I was halfway through another video and scrolled down and seen your video, even though it was four years old I clicked on it and watched your whole video instead of the one I was on! Keep up the great work brother

@ProjectFarm 2 года назад

Thanks!

@MrGetYouLoud 2 года назад

@@ProjectFarm anytime bro! I’m also a ‘researcher’, I always have been. And when it comes to researching products before Purchase, if it has to do with DIY or any kind of tool etc., I know whose channel I’m coming to first every single time!! I started my car audio and electronics channel A few months back but I’m having a hard time catching steam… But honestly man you are truly an inspiration, keep up the great work!!

@Drummerkid461995 6 лет назад

Hey project farm, I enjoy your videos a lot and have been watching for a few months! I’ve noticed in the past of the BDU pants you wear and your haircut and wondered if you were/are in the military but this video just confirmed that. I’m just curious what branch you’re in and your mos. I’m an e4 in the PA Army National Guard and I think it’s really cool that you do these videos in conjunction with your military service. Keep up the good work!

@ProjectFarm 6 лет назад

Thank you! I was in the US Air Force. Thank you for your service!