Airbrushing at Chadwick Model Railway | 36.

Подписаться 72 тыс.

Просмотров 64 тыс.

50% 1

Patreon Link. www.patreon.com/bePatron?u=15...
Donation Link. paypal.me/ChadwickModelRailway
Iwata Airbrush goo.gl/P1ABXd
Compressor amzn.to/2MKItc1
Com Art Paints amzn.to/2KFuDKn
Laser level amzn.to/2KRA5Y9
Soldering Iron amzn.to/2F2EmUl
Helping Hand amzn.to/2qOt0Oy
Miniature Camera goo.gl/UzYWp6
Optical Visor goo.gl/ljSzBi
Magnifier Table Lamp goo.gl/seg8Dj
Dremel's better model goo.gl/DT1kOF
Video Gear
Video Camera (4K) goo.gl/Q36cAY
Microphone goo.gl/RqY6MR
Old Sony Camera goo.gl/r8ao7k

Хобби

Опубликовано:

5 июл 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 265

@hirsutusi5536 6 лет назад

I'd suggest another tip - find a short length of 2" X 4" timber/lumber and drill some paint/thinner bottle sized holes in it - not all the way through - use a Forstner bit or a spade bit. While working with those bottles, stand them in the pockets in the piece of wood, much less likely to get knocked over. A few smaller holes can be used to stand brushes while they are drying.

@ChadwickModelRailway 6 лет назад

Great advice Hirsutus, I’m on the case to make one. Regards Charlie

@Mel-127 4 месяца назад

I started with a Badger 200 suction feed single action. Car touch-up was ok, railway was rubbish. No instructions no internet then. So it went in the back of the draw. In the 80's i had another try. Badger 100, gravity feed. Still no instructions. Just connect to air can, fill with paint, press and go. Yes. Go in the draw. 2008 got interested again. Puchased cheep Awata. Liked this one. Now im playing with airbrushes well over £100+. By learning from internet i use all my 6 brushes for different jobs right from the Badger 200. Happily. So buy cheep buy x2, yes you can. Easily. But today you have the chance to learn that the cheep airbrush maybe worth. God video Chad. Thanks.

@ChadwickModelRailway 4 месяца назад

Thanks Mel, I’m so pleased that you found the video interesting. Regards, Charlie.

@bobt305 2 года назад

Most informative and in plain language. This has given me the 'confidence' to go and have a go! Thank you

@ChadwickModelRailway 2 года назад

Thanks Bob. Regards Charlie

@bobt305 2 года назад

@@ChadwickModelRailway My pleasure, meant every word!

@rjohns7855 2 года назад

Spookily I have the same airbrushes, compressor and booth!

@ChadwickModelRailway 2 года назад

You have great taste RJ. Regards Charlie

@hansfriess 5 лет назад

Thank you for an in-depth explanation of the ins and outs of air brush selection and use. I’m looking at getting one and this video has been very helpful!

@ChadwickModelRailway 5 лет назад

I’m so pleased that you enjoyed it

@gdaysydney 6 лет назад

Thanks Charlie. I appreciate the time you invest in passing on lessons learnt from your own experiences.Keep the videos coming. Dave

@ChadwickModelRailway 6 лет назад

Hi Down under, I’m so pleased that you enjoyed it. Stay tuned. Regards Charlie

@barryuk676 5 лет назад

Thanks Charlie I knew nothing about airbrushes until seeing your video and you have answered a lot of questions. Iv'e seen a couple of your vids and I have to say that you always seem to cover the subject thoroughly and yet still manage to keep it interesting. Thanks Charlie "it all makes sense"!

@ChadwickModelRailway 5 лет назад

Barry, you’re too kind. Good luck on your air brush journey.

@michaelimpey1407 2 года назад

Charlie, I am just catching up on some of your older Videos. This is an excellent explanation of the joys and pitfalls of airbrushes, and all the extra bits you need. Cheers, and stay safe. Michael

@ChadwickModelRailway 2 года назад

Thanks Michael, I’m so pleased that you found it interesting.

@lesliedickinson198 5 лет назад

A very simple but intuitive video thats given me lots of ideas as I'm just coming back into the hobby and I want to recreate the 50 - 60's steam era. The airbrush is the perfect tool to get that very dirty uncared for look that brings back my memories. Keep up the good work.

@ChadwickModelRailway 5 лет назад

I’m so pleased that you enjoyed the video Leslie. Good luck with your layout and hopefully you have subscribed to this channel for new releases. Regards Charlie

@dukhinda100 2 года назад

Thank you for the invaluable information about selecting the airbrushing equipment.

@ChadwickModelRailway 2 года назад

I’m so pleased that you found the video useful. Regards Charlie

@kevinmartin1065 4 года назад

Thanks Charlie this has given me a great insight to what I need to purchase for starting up my own project, to be fare, I will be making my way through your other videos for even more knowledge.

@ChadwickModelRailway 4 года назад

We all have too much time on our hands Kevin.

@matthewevans7382 6 лет назад

I wish this video came out a year sooner. Spot on about purchasing the wrong one. Love your videos. Keep up the good work😀

@ChadwickModelRailway 6 лет назад

I’m so pleased that you enjoyed Matthew. Good luck with your project.

@rhiwderinraytube 6 лет назад

Many thanks for this video Charlie ! I have finally taken the plunge and opened up an airbrush and compressor kit that I have had unopened for about 4 years ! Assembled easily and seems to work fine.

@ChadwickModelRailway 6 лет назад

Good for you Ray. Remember, baby steps first. Just practice on old stock once you have acquired the cleaning gear. Regards Charlie

@modelrailroader5619 Год назад

I’m reviewing all the old airbrush RU-vid videos as I embark on this little adventure with airbrushing and your videos are always great. Very helpful but I did have a bit of a chuckle when you ended up with black paint on everything from here to next Tuesday. As you say, it’s a learning curve…Thanks for the post. Cheers, Andrew 🇨🇦

@ChadwickModelRailway Год назад

Thanks Andrew, I’m so pleased that you found it interesting. Regards Charlie

@Cookie2k 6 лет назад

Thanks for the tip re the airbrush and compressor pressure.....I didn’t realise that the two could be different. I’ve just bought myself an Iwata Revolution....now to take the step to use it.... Enjoy the weekend Charlie. Look forward to the next episode!

@ChadwickModelRailway 6 лет назад

Hi Tase, I’m so pleased that you enjoyed and hopefully it will be of some use. Enjoy your Revolution. Regards Charlie

@brucewoods9377 5 лет назад

So glad that I’m not the only person who takes one look at a can of paint and it is suddenly all over my fingers and the missus’s good towels 🤣🤣🤣🤣

@ChadwickModelRailway 5 лет назад

Making a mess comes naturally to us men folk!

@alravella2548 5 лет назад

Hi Chuck this is Al from Virginia in the USA. I have the equipment and like many of my comrades we are a bit intimidated to start the process. Your video has me ready to start and I have to say you touched on bits (as you might say) that others have not and I found these bits answered some of my question I was searching here today. Well done Sir and blessing to you. Al

@ChadwickModelRailway 5 лет назад

Thanks Al, I’m so pleased that you found it useful.

@BrewPub 5 лет назад

Iwata is a top notch brand, none better. At the technical college I attend , where we do automotive painting, we use lacquer thinner to clean our HVLP guns. Works quite well.

@ChadwickModelRailway 5 лет назад

I’m so pleased that you enjoyed it BP.

@davidfield8503 6 лет назад

Another excellent and informative video. I was always nervous about buying an air brush and all the gear without having any experience and I wholly endorse your suggestion of trying it first. I did so by attending an excellent workshop on weathering run by the brilliant Pendon Museum, which was great fun and highly recommended. I then felt confident enough to go and buy all the paraphernalia and bought Iawata with a side reservoir so that you get a better view of what you are painting. Thanks again.

@ChadwickModelRailway 6 лет назад

Hi David, I’m so pleased that you enjoyed the video. Good luck with your layout. Regards Charlie

@simonwalker6825 Год назад

This was really helpful I've been thinking about getting an airbrush as I restart my model railway career (I'm retiring at the end of 2023 and building a model railway is high on my wish list).. you are very good at resenting extremely good advice. I'm glad I stumbled on to your U-Tube channel as I await an operation (after a bad bicycle crash that done unspeakable damage to my left hand shoulder, maybe swap cycling for model railways... it's a safer option). I think you are very inspiring ... Best regards

@ChadwickModelRailway Год назад

That’s very kind of you to say so Simon. Good luck with your op. Regards Charlie

@donsharpe5786 5 лет назад

Thank you for this informative introduction. I had only used spray cans, which are not controllable and provide variable results. You'r description as to why you need a dual action and what the different units do in itself invaluable. So if I do decide to to go down that route, it will help me select the correct unit. A turntable looks to be invaluable. I had to do my spraying outside to prevent issues with smells in the house.

@ChadwickModelRailway 5 лет назад

Hi Don, I’m so pleased that you found it useful.

@trainsontuesday 6 лет назад

Thanks Charlie, I learned a thing or two there. Laughed my head off watching you trying to wipe paint off and ending up spreading it all over your hands. Great video, David.

@ChadwickModelRailway 6 лет назад

Hi David, I’m so pleased that you enjoyed it . Regards Charlie

@360Degreesfrom0 3 года назад

Thank you for the introduction to airbrushing!

@ChadwickModelRailway 3 года назад

I’m so pleased that you found it useful Roy.

@davidcutts2650 6 лет назад

Liked the airbrush review. I did buy one & am using the compressor for my Pajero 4 x 4. With an air receiver etc. Agree with your buy cheap & buy twice policy, I also learnt this lesson many years ago.. artists pallet knives are good have around too. Thanks for the good tips on weathering.

@ChadwickModelRailway 6 лет назад

Hi Dave, I’m so pleased that you enjoyed it and have benefited too. Regards Charlie

@carol.taylor3675 5 лет назад

Hello Charlie,Very interesting insight to airbrushing for a newcomer,which i am.What is required with all the necessary bits and peace's.Very informative from the start and introduction.This is a new venture for myself as i didn't have clue where to start !!! As all your video's which i have seen and watched.So my next step is gain everything that i require.Great idea to do test runs with various paints before hand to get used to the airbrush etc.Keep up the good work and thank you Charlie...Cazz

@ChadwickModelRailway 5 лет назад

Hi Cazz, I’m so pleased that you enjoyed the video. Practice, practice and practice. It’s not that difficult once you have gained in confidence. Regards Charlie

@malcolmhodgson7540 6 лет назад

Thank you so much for a truly helpful guide. I have been teetering on the edge of getting an airbrush but didn’t know where to start. Found the compressor for £64 and the airbrush is still £125. Love the video and your conversational natural presenting style. Kindest regards. Mal,.

@ChadwickModelRailway 6 лет назад

Hi Mal, I’m so pleased that you enjoyed it. Regards Charlie

@oldbloke5277 6 лет назад

Another great video Charlie. I have an Iwata clone as my first, and hopefully last airbrush. I found that I could adjust a knurled nut at the back end so I couldn't increase the paint flow accidentally and make a big blob (technical speak there) of paint. Thanks for showing how to get the paint consistency right. I've read and re read how to do it, but never seen it demonstrated before. Can't wait to try it out now.

@ChadwickModelRailway 6 лет назад

Hi Old Bloke! I’m so pleased that you enjoyed it. Regards Charlie

@oldbloke5277 6 лет назад

As soon as I've finished replacing plasterboard damaged by myself, removing tiles, tiling, grouting, painting etc, I'll get back onto the railway... I hope.

@bobuk5722 5 лет назад

Hi Charlie. I might be able to add a bit to electrical items, but here I'm the novice and you clearly the Guru. Superb coverage, if you'll excuse the pun, of an intricate subject. Really, really useful as everyone else has said. And don't worry about your catch phrase - everyone has one. BobUK.

@ChadwickModelRailway 5 лет назад

I’m so pleased that you enjoyed it Bob. Which catch phrase?

@lordcondio1036 2 года назад

Another fantastic video with clear, sensible advice. I bought my first airbrush which is exactly the same compressor as the first one you showed and an airbrush with the bottom feed bottle (£8 from Ebay!) It will do me until I see how I get on, as my hands can be a little shaky at times! (Old age hahaha) Thank you again for the wonderful advice Charlie.

@ChadwickModelRailway 2 года назад

Just remember to practice on rolling stock that isn’t too valuable! Regards Charlie

@wayneaskey 6 месяцев назад

Great Instructional video, one task for later I think as modelling confidence develops. At least I have an idea what do and what equipment I would require. Thanks Charlie.

@ChadwickModelRailway 6 месяцев назад

Thanks Wayne, every day is a school day in this game. Regards, Charlie

@jimgreig8410 4 года назад

Great video, as always. Now I'll have to go out and get an airbrush and kit. I've been intimidated by the idea in the past, but you've made it look relatively easy! I will take baby steps, though!

@ChadwickModelRailway 4 года назад

Go for it Jim and good luck.

@pammipayne3334 4 года назад

Hope it all goes well.. wouldn't be without mine.

@w.rustylane5650 4 года назад

I would recommend a Badger 155 Anthem for a mid priced and GREAT airbrush. The Badger was my second airbrush; my first was a Harbour Freight Chinese knock off which I still have and use it for lacquer based paints. I use the Badger 155 Anthem for acrylic paints. I make my own airbrush cleaner and acrylic paint thinner. I'm a model railroader.

@ChadwickModelRailway 4 года назад

Great recommendations WRL

@rcole51 2 года назад

Hi Charlie. How timely it is for me that I just found this video shortly after purchasing a compressor and airbrush kit that is almost identical to the Iwata kit you have. I live in Canada (formerly from Farnborough) so it is sold as a Canadian brand. Unfortunately, it does not have a regulator to adjust the pressure. It is set for 50 psi. I have to play with the valve at the bottom of the water trap as a crude way to adjust the pressure. I have learnt many valuable tips in this video along with those of your other videos. I look forward to your upcoming videos and the cheerful way you present them. Cheers , Roy

@ChadwickModelRailway 2 года назад

It’s great to have you onboard Roy. I’d try and buy a proper pressure valve if possible. It’s so difficult to gauge pressures such as 10psi.

@hastingsbnsfnscalemodeler8594 6 лет назад

Thank you for the great information, I will soon need to be looking at purchasing an airbrush as I begin to take on more advanced portions of the hobby. Great job, is easy to follow. Thank you...Tony

@ChadwickModelRailway 6 лет назад

Hi Tony, I’m so pleased that you enjoyed the video. Good luck with your project. Regards Charlie

@stefanwosinsky1935 3 года назад

Thanks Charlie, I recently purchased an airbrush by timbertech which came with the same compressor as the one you’re using, and some vallejo pigments as well as a cleaning set and a bottle of thinner. Now i just need to find the courage to start using the kit... i’m gonna use it for painting my mountains as well, but since i have a gravity fed instead of a vortex fed airbrush, i’m gonna have to write down the mixing ratio and refill a lot. But ey, it’ll get the job done, and in the long term i think it’ll be cheaper than buying spray cans.

@ChadwickModelRailway 3 года назад

Good luck Stefan, keep the pressure down and measure it when spraying not when idle.

@philbartlett7898 Год назад

Thanks for this video - taking us into the "black art" !!!! Much appreciated

@ChadwickModelRailway Год назад

I’m so pleased that you found it. Interesting Phil. Regards, Charlie.

@stephenyoung8366 11 месяцев назад

Thank you for doing this subject Charlie.I did ask and you have covered the subject very well from my point of view .not knowing a thing about paint spaying .

@ChadwickModelRailway 11 месяцев назад

Thanks Stephen, I’m so pleased that you found it useful. Regards Charlie

@musoseven8218 2 года назад

I can recommend any of the Harder & Steenbeck airbrushes and the Sparmax (when I last looked, Sparmax make Iwata products for them) range of airbrushes too. Great value for money, superb products. I dont necessarily agree that single action airbrushes aren't as good double action airbrushes - they are merely horses for courses, true a DA airbrush is more versatile, but a SA of the correct type can be great for painting large single colour areas Eg a 7mm or 16mm loco. I agree though, don't forget to budget for; a spray booth/extractor, compressor (I'd recommend one with a 'receiver' tank, in the budget ranges they're not too expensive - Eg up to £99) AND a face mask (for specific paint types that may include lead chromate, or VOCs, even some acrylics create microscopic plastic particals), plus decent appropriate paints, thinners and airbrush cleaners. And remember when weathering less is often more😉😊😊👍

@ChadwickModelRailway 2 года назад

An excellent comment, many thanks, regards Charlie

@musoseven8218 2 года назад

Thanks Charlie, great video airbrushing is another asset to the modellers' armoury, not to be feared/avoided.

@crompton33022 5 лет назад

Many thanks, the programme was really useful. Didnt know a thing so thanks for your efforts putting your production together best regards Ian Brunssum NLD.

@ChadwickModelRailway 5 лет назад

Ian, I’m so pleased that you found it useful. Regards Charlie

@charlessmiles8889 5 лет назад

Very interesting and informative. I am not into Locomotives but wanted airbrush advice as decorate ornaments to adorn my Indian Tuk Tuk

@ChadwickModelRailway 5 лет назад

Good luck with your Tuk Tuk!

@dougalmcdougal8682 2 года назад

Thanks once again Charlie , great advice & summary 👍

@ChadwickModelRailway 2 года назад

I’m so pleased that you found it useful mate. Regards Charlie

@philbartlett7898 3 года назад

Another really useful video Charlie with some great tips. Thanks as always

@ChadwickModelRailway 3 года назад

I’m so pleased that you enjoyed it Phil.

@michaelsmith7425 2 года назад

Late to the party on watching this one, but awesome video. I actually have that exact compressor, but was unaware of the versatility of a dual action versus a single action. As the layout comes back to life after many years hiatus due to the interruption of children :) I will be restarting in the coming months and building a small test layout just to refine the many skills I have learned from your channel before commencing on a larger project.

@ChadwickModelRailway 2 года назад

That’s great news Michael. Welcome aboard mate, regards Charlie

@BillySugger1965 Год назад

Great coverage of the subject Charlie. Seriously, you won’t get mineral build up from water condensed from the air, by definition that’s distilled water. But you won’t want that water thinning your water based paint intermittently, as water droplets come through, and you don’t want _any_ water in solvent based paints. So using the water trap as you say is a must. I bought an add-on reservoir for my compressor, which otherwise looked just like the one you have. I did need to buy a bottle of Loctite 542 to seal up the few pipe work connections that didn’t have gaskets. It cost me less than £100 and was a great addition. It has a drain in the bottom, which other videos advise should be used to clear water after EVERY use, to prevent rusting inside the tank. The only downside to the cheap tank was the poor instructions, but I managed okay.

@ChadwickModelRailway Год назад

Thanks B5375, great airbrush info. Regards Charlie

@onnomulder9775 6 лет назад

Thank you very much Charlie for this very educational video!! I saved with the others. The Iwata airbrushes and compressor are available in Holland. Regards Onno.

@ChadwickModelRailway 6 лет назад

Hi Onno, I’m so pleased that you enjoyed it. Good luck with your project. Regards Charlie

@bobainsworth5057 3 года назад

A great help. I have the equipment but wasn't sure how to use it.

@ChadwickModelRailway 3 года назад

I’m so pleased that you found it useful Bob, regards Charlie

@alexhill9169 6 лет назад

Thank you for the excellent video, very infomative, I am planning on getting one at some point. I am only doing a small N gauge layout and want to do track weathering at the moment but your right about buy one buy well.

@ChadwickModelRailway 6 лет назад

Hi Alex, I’m so pleased that you enjoyed it. Good luck with your N Gauge layout. Regards Charlie

@FBMRR 3 года назад

Thanks Charlie this was great. Just started with airbrushing. These are great suggestions.

@ChadwickModelRailway 3 года назад

Thanks Rick, I’m so pleased that you enjoyed it.

@LJRLowevilleJunctionRailroad 6 лет назад

Thanks for the great and informative info on air brushing! Linda 🚂🙂👍🏻

@ChadwickModelRailway 6 лет назад

Hi Linda, I’m so pleased that you enjoyed it. Regards Charlie

@williammelville5789 5 лет назад

Good video Charlie. Lots of information. Keep up the great work , and keep the videos coming. Thanks. William.

@ChadwickModelRailway 5 лет назад

Hi William, I’m so pleased that you enjoyed the video. Good luck with your project.

@jolliemark6294 4 года назад

Good advice Charlie....thanks for sharing....Jack 👍👍👍

@ChadwickModelRailway 4 года назад

No problem Jack.

@johnmcdermott5145 3 года назад

Great Video, thanks Charlie, very informative and most helpful.

@ChadwickModelRailway 3 года назад

Thanks John, I’m so pleased that you enjoyed it.

@gregorytate7666 5 лет назад

Excellent presentation, easy to follow and well thought out! [Only exception is you broke your recommendation to wear protective gloves while handling paints😉😄😄]

@ChadwickModelRailway 5 лет назад

A fair point Gregory but I’m so pleased that you enjoyed it.

@7APT7 6 лет назад

excellent RU-vid Clip Charlie 👍 Great in-depth explanation Thumbs up 👍

@ChadwickModelRailway 6 лет назад

Hi Jamie, I’m so pleased that you enjoyed it. Thanks Charlie

@samiam619 4 года назад

Don’t forget to get a cleaning kit BEFORE you start! Mine has various size twisted wire and bottle brushes, really tiny...

@ChadwickModelRailway 4 года назад

A good point Samuel. Good airbrush cleaning aerosol is also an essential. I do hope that you have subscribed, regards Charlie

@nigelcarter9503 6 лет назад

Great advice, Charlie.

@ChadwickModelRailway 6 лет назад

Hi Nigel? I’m so pleased that you enjoyed it. Regards Charlie

@andrewlaverghetta715 8 месяцев назад

Since I watched this the first time, I picked up an airbrush of my own! I live in the states and bought a Paasche H of some kind. It’s a single action and so far, it’s been great. If I need more paint, I can twist the end and it gives more or less paint. I think it was around $45 US. Then I picked up a compressor from Harbor Freight Tools (again, in the US) for around $100. It actually came with its own airbrush. I don’t remember the brand, but the one that came with the compressor is a double action gravity feed but the cup doesn’t come off like on my Paasche. It had an adjustable pressure gauge, the compressor, and shuts itself off when it reaches a certain point but still provides continuous pressure. Love it so far.

@andrewlaverghetta715 8 месяцев назад

Oh almost forgot, I’ve only used Tamiya paint thinned with IPA.

@andrewlaverghetta715 8 месяцев назад

Oh, also my compressor looks almost exactly like yours.

@ChadwickModelRailway 8 месяцев назад

That’s great news Andrew, I’m so pleased that you’re making good progress. One however, I would only use Tamiya thinners with Tamiya paints. Regards, Charlie

@peterjhillier7659 5 лет назад

What a really good honest straight forward Video, I model 0 Gauge so I assume your preferred Air Brush also be suitable. I have enjoyed and learnt a lot from all your Videos. Thank you.

@ChadwickModelRailway 5 лет назад

Hi Peter, I’m so pleased that you enjoyed the video. I’m sure that my airbrush will suit your needs. I used it to weather an 0 Gauge 37. Regards Charlie

@highlandersixtysix Год назад

I have had an Iwata airbrush set-up for some number of years and have 'enjoyed' varying degrees of success. This video has been transformational, so very informative & the piece on viscosity in particular, I can't thank you enough for taking the time to provide this for the community. p.s. You didn't fly Spitfires in a previous life did you? That mask gives you a very distinctive tone 😉

@ChadwickModelRailway Год назад

I’m so pleased that you found it interesting, Highlander 66. Take care mate, regards, Charlie

@steventrout4055 5 лет назад

Very informative video thanks I will be using it for reference when I start my airbrushing

@ChadwickModelRailway 5 лет назад

I’m so pleased that you enjoyed it Steven.

@LemartesLogistics 3 года назад

Cracking video. Great coverage/ review

@ChadwickModelRailway 3 года назад

Thanks mate, I’m so pleased that you enjoyed it

@alanwarren9503 5 лет назад

hello Chadwick......this is a great video....there are compressors available here in the U.S. with tanks for under $100.00 US...from a company called Harbor Freight....I also have that one in your video.....great choice of airbrush also, I use it..not to be critical but try using the airbrush using the plunger with your trigger finger...much better control...as an artist ive been air brushing for over thirty yrs... keep up the great info vids

@ChadwickModelRailway 5 лет назад

Hi Alan, I’m so pleased that you enjoyed the video. Good spot with my thumb, I’ll check it out when the airbrush comes out again. Regards Charlie

@billbentham 3 года назад

Thanks Charlie, another brilliant video. Bill

@ChadwickModelRailway 3 года назад

I’m so pleased you found it useful Bill. Regards Charlie

@TrevorElliot Год назад

Charlie, thanks for the video. I learned a lot.

@ChadwickModelRailway Год назад

Thanks Trevor, I’m so pleased that you found it interesting. Regards Charlie

@paulhayward9047 4 года назад

Hi there I had wished that I had done as you said and taken small steps at at time .My wonderful airbrush I fear is now damaged as a result of me trying to clean the thing and as a result now doesn't work so now I have to go and get another one.However I did enjoy your tutorial

@ChadwickModelRailway 4 года назад

I’m sorry to hear that Paul. Is it just bunged up with dried acrylic paint?

@astrabelmont 4 года назад

Thank you Charlie for another helpful video. I really like your presenting style; it is calm and un-flustered but very personable, too. I was wondering if you know if one can obtain a spray paint booth that has a self-contained extraction capturing box/contraption of some kind. My window (as is my whole house) is a mid-terrace house that is right on the pavement. I have no frontage/forecourt so I can't hang a hose out the window. Surely someone has manufactured and marketed such a booth, but I can't see any on the internet? Or at least it's not obvious to me if I am seeing them?

@ChadwickModelRailway 4 года назад

H Nicholas, give Lord and Butler a call. I’m pretty sure that I bought mine there.

@clivecobbold6815 4 года назад

Hi Charlie a great video mate it will help me with my airbrushing I have a iwata airbrush gravity fed one I am still not sure of it at the moment but I will carry on with it and pearthaver with it 😀😀👍👍👍mate Clive

@ChadwickModelRailway 4 года назад

You’ll soon master it Clive. Just leave the expensive locos alone.

@rmickel1322 3 года назад

Thanks, Charlie, for great airbrush tutorial. Specially like the information on bottle-feed airbrush. Made perfect sense how you progress from lighter to darker paints when weathering.

@ChadwickModelRailway 3 года назад

I’m so pleased that you found it useful RM.

@kennethcartman473 6 лет назад

The iwata Neo is a really good first airbrush.

@ChadwickModelRailway 6 лет назад

I totally agree Kenneth.

@Lindsay5137 4 года назад

Hi Charlie, a great video, while watching I had an inspirational flash, that turntable you had - I thought, I'm about to dispose of a Microwave, that's got a round platter in it - that's an acceptable turntable, together with a mounting/pivot - then I thought - why not use more of the mwave? There's a fan - extraction device - it's really a great spraybooth waiting to be repurposed. I haven't yet finalised anything but it's all there waiting for some activity. (My generation doesn't like to throw ANYTHING out.)

@ChadwickModelRailway 4 года назад

Great idea for a spray booth LM.

@simontheplantsman 3 года назад

Excellent insight, thanks

@ChadwickModelRailway 3 года назад

You’re most welcome Simon.

@arthurrae7904 4 года назад

I enjoy your various videos & hope you read the comments, despite there being scores of them. You mentioned adding a stay alive to a 0-4-0 to kick it across insul-frog points, how is one made for analogue please. Also, I have considered scoring my rails with a Dremel, consistent with real world track lengths, so that my long base passenger train makes that distinctive (Da Dom Da Dom - Da Dom Da Dom) sound as it moves along. Is this a good idea? Thank you for your most informative contributions, Arthur.

@ChadwickModelRailway 4 года назад

Hi Arthur, I’m so pleased that you enjoyed the videos. It is possible to fit a stay alive but it would be a very complex installation. I really can’t help you on that one. Regarding the “Clickity Clack” the old bolted rails came in 60 foot lengths. This equates to 10 inches on OO Gauge. I would try and make a 1 or 2mm notch in both rails on a straight section, snd see how it goes. You could always fill it with solder if it doesn’t work out.

@alvaroacosta255 5 лет назад

Great video Charlie.

@ChadwickModelRailway 5 лет назад

I’m so pleased that you enjoyed it.

@michaelaldred6529 5 лет назад

Great work very informative .

@ChadwickModelRailway 5 лет назад

Thanks Michael.

@jefflizotte4758 6 лет назад

thank you

@ChadwickModelRailway 6 лет назад

Hi Jeff, I hope it will help you with your projects.

@brentleajunction 6 лет назад

Hi Charlie i gave it ago and ive found that the paint and thinners was a bit hard work at first the didnt want to mix with each other but as i put more in more they went together i guess its a learning curve ive done it but its not the best ive done just leaving it to dry ill look today cheers paul

@ChadwickModelRailway 6 лет назад

Well done Paul. It all part of the learning experience. Did you use the same make of thinners as the paint? Regards Charlie

@brentleajunction 6 лет назад

Chadwick Model Railway hi charlie i used the 1 you have in a red label ive looked at richard at Everard Junction but it says he used phoenix precision thinners but ive only just found that out ill see ehat it looks like when i get home from the office at work

@ModelMinutes 6 лет назад

Top video! Thanks for the info! 😊

@ChadwickModelRailway 6 лет назад

I’m so pleased that you enjoyed it. Regards Charlie

@nesr8786 5 лет назад

Thanks Charlie ,very informative and helpfull, some real good tips.till next time ,Take care

@ChadwickModelRailway 5 лет назад

Thanks NESR, I’m so pleased that you enjoyed it.

@brentleajunction 6 лет назад

Hi Charlie that has helpet out alot mine was coming out in spoils so need to have a play did my first loco and probably not the best but as i like it and ill keep trying thanks for the shout out made my day and ive got the same compressor as you but i got it for free cheers paul

@ChadwickModelRailway 6 лет назад

Hi Paul, I’m so pleased that you enjoyed the video. Only practice will improve your skills. Keep at it. Regards Charlie

@brentleajunction 6 лет назад

Chadwick Model Railway thanks mate ill do just that

@madformorgan7848 6 лет назад

Great video Charlie

@ChadwickModelRailway 6 лет назад

I’m so pleased that you enjoyed Jeff.

@geoffwalker315 6 лет назад

Another highly informative video. I will be buying my stock already weathered. Geoff. W.

@ChadwickModelRailway 6 лет назад

I’m so pleased that you enjoyed it Geoff. One day I’ll convert you 😃 . Regards Charlie

@FredWilbury 6 лет назад

Great tips Charlie , I wish I’d seen this before I bought my cheapies ...I seem to spend more time cleaning and getting the damn things to work ... do these really work better than my draper £17.00 thing ...regards Fred..ps I do have a decent compressor which is something At least 😱

@ChadwickModelRailway 6 лет назад

Hi Fred, yes Iwata brushes really are much better. Perhaps you could borrow one from another modeller. Enamels will always flow better than acrylics and will clean off easier too. Good luck with your project. Regards Charlie

@MikeWooshy 6 лет назад

Cheers Charlie!

@ChadwickModelRailway 6 лет назад

Hi Mike, I’m so pleased that you enjoyed it. Regards Charlie

@duncan1945 6 лет назад

Interesting stuff Charlie. I would like to try that out. Regards, Duncan.

@ChadwickModelRailway 6 лет назад

Thanks Duncan, I’m so pleased that you enjoyed it.

@pammipayne3334 4 года назад

Thank you so much for this video Mr C, I am not into model railways but I am a general crafter. My husband bought me a kit that I connect a cannister to the line and away I go. BUT here is why I am so grateful to you for this video... I have been struggling with the consistancy of my paint. I was looking for tutorials and up popped this video. Thankyou so much, I am going to get myself some thinner then I will be good to go. However, I was wondering do you or anyone have any thoughts on the canister useage? last thing I want is to mess up a piece of craft work that I have spent ages on doing. Many thanks once again.

@ChadwickModelRailway 4 года назад

Using canisters of compressed air is not the best system. It can be hard to regulate the airflow and the canisters can get very cold. Best to just do a little at a time Pammi. Always check the flow by spraying onto paper or card just before you commit to your art work. Regads Charlie. Oh, check out Luke Towan at Boulder Creek.

@pammipayne3334 4 года назад

@@ChadwickModelRailway Thank you so very much for your reply. I always use a scrap of card to check flow before I start. Nothing worse than having to throw something away that I have spent time doing. I will go and check Luke Towan, thanks for the tips, happy crafting. Pammi.

@rayshowsay1749 4 года назад

@@ChadwickModelRailway A possible alternative to canned air, and just short of a buying a compressor, is a portable air tank, such as this: . The air supply certainly lasts a lot longer(no doubt it can be closely estimated how long 40L at 130psi will last if drawn off at any given air brushing pressure). The down-side obviously is having to toddle off to a service station periodically to fill the tank(where, despite the saying, air is not free -- anymore).

@dominicdinosaur 6 лет назад

Nice, I was look forward to this!

@ChadwickModelRailway 6 лет назад

Glad that you enjoyed it Dominic.

@dominicdinosaur 6 лет назад

Thanks Charlie. Just Interested (sorry to bother you with lots of questions...) do you recommend light weathering or heavy weathering for A4s?

@nw24153ns 3 года назад

I just thought I'd tell you that when I searched for "model train airbrushing" on RU-vid your video pops up first.

@ChadwickModelRailway 3 года назад

Well that’s surprising. Regards Charlie.

@bigfella1952 4 года назад

Very Informative. x The Bigfella x

@ChadwickModelRailway 4 года назад

Hi, I’m so pleased that you found it useful.

@TrainVideoPro 6 лет назад

Hey Charlie, thanks for the great video. I recently got an airbrush and several extra glass bottles that attach to bottom of the airbrush. If I do not use all the paint during my weathering session can I leave paint in the bottles and come back later or will it go bad?

@ChadwickModelRailway 6 лет назад

Hi, I tend to leave the paint in the jar until I have finished for the day. It might need another stir should you use it later. I then tip the remnants back into the original pot. I hope that helps, Regards Charlie

@callumculross2344 4 года назад

ANother fantastic video, very comprehensive, beautifully presented and you always make me laugh. I will get these brushes when im paid :) p.s. where did you get that extraction unit? Regards, cal

@ChadwickModelRailway 4 года назад

Hi Cal, I bought it at a show but try Lord and Butler, they stock a great deal of stuff.

@jwhiskey242 2 года назад

I have had airbrushes for more than 40 years, but no one has ever given me this kind of explanation...

@ChadwickModelRailway 2 года назад

I’m so pleased that you found it interesting JW. Regards Charlie

@Synthematix 4 года назад

Folks/charlie one thing i have learned the hard way with airbrushes is NEVER use it with enamels INDOORS, ONLY use acrylics inside, i weathered 2 coaches and the fumes from the enamels set all the block of flats fire alarms off at 1 in the morning! had to get the fire brigade out to disable them.

@ChadwickModelRailway 4 года назад

A very good point. I only use enamels when I’m using a paint extractor.

@DungeWoodRailway 6 лет назад

Hi Charlie Interesting video, some useful tips that Im sure will help when I have to weather my 21 mgr hoppers. Do you have any recommendations for spares etc, I still have to get a needle or two. Cheers Paul

@ChadwickModelRailway 6 лет назад

Hi Paul, Is yours an Iwata airbrush? Regards Charlie

@DungeWoodRailway 6 лет назад

Yes I've got two Iwata I've had for years but never used much, however both are second hand items but appear to maybe only need a service and needles as I wasn't as fastidious at cleaning as I am today. I just looked on the Web and got loads of stores but would prefer to use a reputable seller for spares etc. Cheers

@jdavis460 4 года назад

Wonder if you can get couplings to connect an air brush to a “normal” compressor assuming you can regulate the pressure low enough.

@ChadwickModelRailway 4 года назад

I’m not sure that you could get it regulated that accurately.

@ryansta 4 года назад

Connect the compressor to a cylinder tank, then use tank to supply the airbrush is how most do it.

@jdavis460 4 года назад

@@ryansta Thanks Ryan

@Sorarse 3 года назад

I know this is quite an old video now, and I'm a bit late to the party, but thought it might be useful to say that an air compressor similar to the one you are now using, but complete with the additional reservoir tank can be obtained for less than £150. Just saying that they needn't be as expensive as the £400 or so you mention in the video.

@ChadwickModelRailway 3 года назад

Thanks for the info Sorarse.

@paulredding5864 3 года назад

Similar here, finally dug mine out after sitting in its box after 10+ years mainly as zero confidence.. It was a package from Expo tools at about £90 on at train fair special. It had the same DA airbrush as yours charlie with all the accessories incl water trap and press gauge. The compressor has a tank inbuilt so no pulsing. The regular sales guy did say it was a good buy and in hindsight he was quite right. One extra I just bought was the quick release adaptor so you dont need to keep unscrewing it for cleaning etc. Its been a learning process but getting there. Learning all the different paints has been a nightmare TBH but step one has been to buy the same thinner as the brand of paint. Tip 2 was to buy an electric paint stirrer like the one from Trumpeter.Tip 3 was to thin the paint in the jar as bought, then its done and no need to keep mixing in cups to minimise wastage. I use it mainly for kits and on RTR just use dry brushing on the underframes etc.

@dilwich 4 года назад

Cheers Charlie . . . :)

@ChadwickModelRailway 4 года назад

Thanks mate.

@mrweaverman1 6 лет назад

hi Charlie smashing info video cheers mick

@ChadwickModelRailway 6 лет назад

Hi Mick, I’m so pleased that you enjoyed it. Regards Charlie

@geordielad9636 2 года назад

Having received my first airbrush airbrush for my 76th birthday (no trombone jokes please) I was wondering what type of extraction hood you use or what you recommend at a reasonable price, also what type of breathing mask. I would like to see my 77th birthday (health & safety) hence asking you for your advice, Bill.

@ChadwickModelRailway 2 года назад

I believe I bought my extraction booth from Lord and Butler, a model railway shop on the outskirts of Cardiff.The filters I use are made by 3M. I have a basic filter when spraying acrylics, but a more industrial version with replaceable filter packs when spraying enamels. Regards Charlie

@geordielad9636 2 года назад

Thank you very much Charlie for your reply, I did not expect a reply as you did this video a while ago. Your information was most helpful and appreciated, Bill.

@brentleajunction 6 лет назад

Hi Charlie when am using matt varnish do i put any thinners into it??

@ChadwickModelRailway 6 лет назад

That depends if it’s premixed. If it isn’t you will probably need to thin it. Regards Charlie