Тёмный

Airbrushing Molotow Chrome From A Marker - Great Results !! 

Barbatos Rex
Подписаться 100 тыс.
Просмотров 61 тыс.
50% 1

In this video I crack open a Molotow Chrome Marker and pour the contents into my airbrush and spray a few spoons. I didn't know what would happen as I did it live on film for the first time. I was shocked to see how good it came out.
And I want to report to you that these spoons look even better a few hours after this video was made. It looks much smoother. I will film an update as too it's durability in a week or two. Stay tuned
Get A Molotow Marker Here amzn.to/3hKlT3Z

Опубликовано:

 

2 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 337   
@EvilEye501
@EvilEye501 3 года назад
This is easily my favourite chrome paint, it's not cheap but it's a dream to work with. Word of advice: Mr. Leveling Thinner is perfect for thinning it, you add a little bit and it gets much easier to airbrush (and self-levels too). Any lacquer thinner should work but Mr. Leveling Thinner is my favourite.
@barbatosrex9473
@barbatosrex9473 3 года назад
Mr Leveling Thinner is my favorite item on my bench. When I'm half way down in the bottle I get more 😉 it's the best, I thin almost everything with it but forgot to with Molotow. Thanks for the tip.
@jamesfair9751
@jamesfair9751 3 года назад
@@barbatosrex9473 it says it’s alcohol base so wouldn’t you get better result thinning with alcohol? I don’t know I’m genuinely asking.
@barbatosrex9473
@barbatosrex9473 3 года назад
@@jamesfair9751 you can use either one. Like Tamiya paints, even though most use alcohol I use Leveling Thinner
@8BitJustice
@8BitJustice Год назад
@@jamesfair9751 Most alcohol-based paints can be thinned with hobby-grade lacquer thinners, and semi-gloss and glossy ones actually tend to thin better with some type of retarding additive (which is the difference between Mr. Leveling Thinner and regular Mr. Color Thinner, the Leveling Thinner has Drying Retarder in it to slow drying and allow the paint to level out while drying). I use it for all of my Tamiya X acrylics and all my Mr. Hobby Aqueous acrylics. You can also use Mr. Rapid Thinner for flat finish alcohol-based acrylics. I use it with the Tamiya XF acrylics.
@mantonioisc
@mantonioisc Год назад
I read your comment and tried it. It does work well, but I also tried pure ethanol and it worked even better. Tried other thinners but they were bad (tamiya laquer, tamiya acrylic and store laquer)
@JohnsonArmsProps
@JohnsonArmsProps 3 года назад
They sell refill bottles of this stuff which is more expensive, but you get a lot more paint in the bottle. It's also a squeeze bottle so you can measure it out as you need it
@CurvedSlightly
@CurvedSlightly 3 года назад
This ^^
@441rider
@441rider 2 года назад
I thin it with 99% iso and it sprays ok. The brush/pen is just a thicker formula,
@knownunknown7607
@knownunknown7607 2 года назад
It's alcohol-based paint - and the way it works to get its sheen and mirror-smoothness is through a surface-tension trick that aligns the particles in it while the alcohol evaporates and the binder sets. That's why it likes to be on heavy, preferably in one juicy layer. ✌😁
@JayJayDobro
@JayJayDobro 3 года назад
I have experimented with thinning Molotow with laquer thinner. It seems to make little diferance in the shine and at a 50/50 mix it goes twice as far
@MANOLEJAS
@MANOLEJAS 3 года назад
Worse or better?
@keyshiakon6810
@keyshiakon6810 3 года назад
@@MANOLEJAS I got the same results. The lighter the coats the better the results. You don't need to do anymore than a few light passes for the desired chrome effect.
@marcusprince3999
@marcusprince3999 3 года назад
Do you think that i could just use iso alcohol to thin it. I mean, its already an alcohol based paint anyway.
@mikthe2004
@mikthe2004 2 года назад
@@marcusprince3999 Why thin it at all? It's already thin. I actually sprayed it on fairly wet to get a liquid chrome effect. As it dries it initially goes cloudy - and looks like bright silver paint. I put my object on my car dashboard in the sun, and it took over a week to fully dry, but when it did - WOW!! Chrome. It looks amazing!! I've yet to find a clear coat though, and I've tried Alclad Aqua, Alclad Lacquer, and E7 Chrome Sealer. All took the shine off the chrome. I'm going to dry my object further, and then just handle it carefully. With incidental handling it is OK!!
@BaddaBigBoom
@BaddaBigBoom 2 года назад
@@mikthe2004 I have 'Pledge Revive It Floor gloss' it's back to the original formula as "Klear" and worked really well on the 24th scale Subaru I just made. I think this might work well as a clearcoat.
@davidhahn8583
@davidhahn8583 3 года назад
really enjoyed this video, and especially enjoy your tips and tricks
@barbatosrex9473
@barbatosrex9473 3 года назад
Thanks buddy, I have many more to come. Thanks for watching
@Aces_Eights_Scale_Vision
@Aces_Eights_Scale_Vision 2 года назад
Have you ever tried tinting the chrome with alcohol inks? I’d like to have a black chrome that I can apply with a marker.
@MrThelittleguy903
@MrThelittleguy903 3 года назад
I let it sit for two weeks while on vacation and found it very durable. I experimented with different clear glosses but they just dulled the finish a bit.
@barbatosrex9473
@barbatosrex9473 3 года назад
True, mine has dried nicely over the weeks. Next time I'll try and dry them in my dehydrator and see how that works. Try Vallejo Metal Varnish, that stuff is awesome. It might keep the shine. Check my video test on it
@skipgotti6599
@skipgotti6599 2 года назад
Will it dry quicker if you apply heat on it?
@OldCarAlley
@OldCarAlley 3 года назад
Awesome informative video..... I'm going to spray some dash parts for a old Galaxie I am restoring, and was just researching painting with Molotow, using my air brush. Looks like a good product.
@RHC_NYC
@RHC_NYC 3 года назад
After doing extensive research, what I've found is that you need to let this paint dry for days. Maybe even a week. The only coat that seems to not negatively impact the chrome too much is Alclad II Klear Kote Gloss (ALC-310). It's important to not touch the paint AT ALL while it dries for those few days. I have also seen examples where they let the chrome paint dry for like 30 days (without a clear coat) and at that point it seems to resist smudges and fingerprints. 30 day is a long time. But if it's a piece you're painting and just displaying, it can dry on it's own anyway. Try both methods, and see if that works. It really has the best chrome effect I've seen from any other brands. Good luck.
@barbatosrex9473
@barbatosrex9473 3 года назад
I did Aqua Gloss in a video test. Works great. I will be testing my new 2K Gloss on it today and posting it
@starscream8163
@starscream8163 2 года назад
Pledge floor gloss revive it works too on brush and airbrush as well.
@charlesbecker4501
@charlesbecker4501 2 года назад
I got one of their little pens to experiment with. It is good enough to use to touch up model chrome.
@willisjackson7029
@willisjackson7029 2 года назад
Mr Hobby Leveling Thinner does wonders for hand brushing Molotow. I’ve been using it for about a year now and it works great. If you use the pen and get all of those streaks and strokes lightly dab a little Mr Hobby leveling thinner onto the Molotow and it will take away all of those marks and strokes. I’ve even used it to correct a fingerprint when the paint was still wet and it causes the Molotow to fizz like soda and then it self levels back out. I’ve also learned that you have to let the Molotow to dry for a few days before it’s cured.
@Tinybudgetfilms
@Tinybudgetfilms 3 года назад
When i airbrushed it, it didnt come out shiny, how come?
@antibodyarmy
@antibodyarmy 3 года назад
this stuff is designed to be brush painted, used as the marker, used in a dropper, and yes in a air brush. you can order the the refill bottles to avoid the whole dismantling a marker. its alcohol based paint, so dilute with that its also scratch and uv resistant so its pretty darn durable.
@mikthe2004
@mikthe2004 3 года назад
I've only used Green Stuff World Chrome which is also alcohol based. Is Molotow the same as that? The GSW chrome dries pretty hard, but if you handle it a lot - rub it hard with you finger for example - it will dull. I don't think there would be a problem with incidental touching though? Are you familiar with GSW Chrome? I've got both chromes sitting in my cupboard, and I'm going to spray 2 Masquerade masks with one of them, but I want the best overall look. I think Molotow looks a little more chrome like? But is it durable as GSW Chrome? Anybody out there got an opinion on this??
@budakota
@budakota 8 месяцев назад
Coooool Chrome Effect!!, Best I've Seen Thus Far For Airbrushing ..Wondering /Curious tho ....If One Was To Airbrush a Gloss Clear Over It ...such as Cheap Future/Quick Shine ?..Would It Still Retain His Shine/Durability, As You Have Shown Your Viewers/Subscribers ( I mentioned Future/Quick Shine , as in turn , is more cost effective for my budget ATM..As Always Look Forward To Your Expert Opinion Robert!!!..Hope Your Wife Is Improving Day By Day?!:):)
@FractalThroughEternity
@FractalThroughEternity 3 года назад
I appreciate how much money you save me. Genuinely, and it seems like you have a great time doing the tests that save us money :D NAIL POLISH TEST LOLOL YESSSS Good tip on the dropper bottles! I have been using empty Alclad bottles for storage but it doesn't have the dropper tool and I'm highly resistant to using disposable pipettes. I produce enough waste as is, you know? The cool thing about empty Alclad bottles is that a lot of them have labels you can basically erase with lacquer thinner and then use a sharpie for your own info. But it doesn't have that dropper which I want so badly. Have you considered streaming your building processes? Its not a thing everyone enjoys doing but a lot of folk find this type of content to be relaxing, satisfying, and educational. I've been encouraged to look into it because I love this hobby so much but my content would be "Learn from me by watching me fail repeatedly and do things I really shouldn't do."
@barbatosrex9473
@barbatosrex9473 3 года назад
I've been thinking about a build video a couple things hold me back. I would need better equipment for filming and editing for sure. And I love to listen to my music when I build, in particular metal music. Plus there's so many great builders here that it's really intimidating to me. I feel I wouldn't want to watch me after seeing these other great builders : )
@A_Man_Named_Ghoul
@A_Man_Named_Ghoul 3 года назад
What do you think a good clear coat sealer to use for this on plastic/ 3d PVA prints?
@BaddaBigBoom
@BaddaBigBoom 2 года назад
The new Pledge "Revive It" floor gloss. It's back to the old formula of Johnson's "Klear", I haven't tried it on this yet but I reckon it'll work.
@Wa11breaker
@Wa11breaker 3 года назад
Hey, first of all, thanks for all the reviews and tests, I can't even find most of those brands and products but is really relaxing and informative content! Any chance we get a test on Molotow ONE4ALL acrylic paints on airbrush and even on brush someday in the future? I know it's not a proper model paint but it's one of the few brands that's easy to find around here (no idea why) and doesn't cost a ton for the amount it come in the refil bottles.
@barbatosrex9473
@barbatosrex9473 3 года назад
I am going to order paints directly from Molotow so I do plan on a video test
@geobeard3804
@geobeard3804 3 года назад
That is SICK! Never thought about trying to decant those pens. Too cool! Also didn't know you could buy those Tamiya bottles, def will be ordering some of those ASAP. Thanks
@barbatosrex9473
@barbatosrex9473 3 года назад
Anytime buddy, thanks for watching
@lg8471
@lg8471 Год назад
Try on white spoon... I'm thinking about buying a newer system that starts at like 3K... I haven't looked at the info they sent... Yet... but their video was impressive... as goo and less work/steps as the painting it on a helmet videos.... It's hard to find someone local who actually does chroming... Iowa... I'm hearing, "send it to Nebraska, near Omaha....
@ChairMan71196
@ChairMan71196 Год назад
Seems like you just paint stuff. you don’t particularly airbrush murals and such but you use the airbrush like it’s a spray gun. Lol you should get a mini Spray gun, it might do better for you, the fan pattern is way better. Also you could get the paasche talon with the .6 or 8 and the fan tip. That set up looks to do good. 🤷🏼‍♂️ keep it up bud
@wingnutbert9685
@wingnutbert9685 4 месяца назад
Almost seems like it would be best to dip parts in it so it's on all at once and not being dried as you go by the airbrush. Not sure if a rotating drying holder would help. Might keep the paint level and sag free. But also may effect the cured look because the paint is still moving around a constantly while spinning. Unlike a piece of paper or similar, sitting flat and still on a table.
@anthonyricco5522
@anthonyricco5522 2 года назад
Hey man, hope you are good. I've tried the Molotow out but I left it for 3 days to cure and it still dulls when I touched it, Also tried some clear coats on it and the immediately dulled the mirror finish. Did you ever test the durability or any clear coats over it. I just got some pledge floor protector so may try that out and see if it gives a better result, thanks man - excellent video.
@bradbroemmer9106
@bradbroemmer9106 Год назад
Hello. Did you ever use the Pledge? I'd like to know because I just air brushed some wheels with Molotow.
@anthonyricco5522
@anthonyricco5522 Год назад
@@bradbroemmer9106 Hi Brad, no unfortunately not, I haven't had the chance to.
@tallmanwsor
@tallmanwsor 9 месяцев назад
​@@anthonyricco5522 Any updates on your trial of the pledge?
@anthonyricco5522
@anthonyricco5522 9 месяцев назад
@@tallmanwsor hi there - no - sorry haven't had a chance yet.
@Nasermma
@Nasermma 2 года назад
You sound, talk and pronounce jusssst like Robert De neiro 🤣🤣🤣 For a second I thought he left Hollywood 🤥
@EricHonaker
@EricHonaker 3 года назад
Did you ever post results of the durability test? I couldn't find a vid.
@cadecu
@cadecu 3 года назад
Yeah, been looking for this too.
@lucasf599gtb
@lucasf599gtb 2 года назад
My friend… you are a hero!! I was thinking about testing these on the airbrush, but I was kinga getting away of that idea because of the price on these, thanks man!
@cwood7240
@cwood7240 7 месяцев назад
How was the durability? Man! that is a great chrome finish. This would be my go to chrome paint
@barbatosrex9473
@barbatosrex9473 7 месяцев назад
Well it's not too durable but after weeks of drying it dried pretty good, not very durable but at least I could handle it without it being ruined
@cwood7240
@cwood7240 7 месяцев назад
I saw a video of another guy and he used a clear coat. It went on great and did not loose its shine. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UV9a1QxEw0A.html
@cwood7240
@cwood7240 7 месяцев назад
I caught a video of a guy and showed durability and put a coat of clear and did not change the brightness. seemed indestructible. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UV9a1QxEw0A.html
@dstar01
@dstar01 3 года назад
Congrats on 1k subs! You've helped me a ton from all the tests you've been doing.
@barbatosrex9473
@barbatosrex9473 3 года назад
Thanks. A lot more tests to come. Anything in particular you want to see tested?
@dstar01
@dstar01 3 года назад
@@barbatosrex9473 candy coat these molotow's maybe? And compare with other candy coats with a different chrome base.
@barbatosrex9473
@barbatosrex9473 3 года назад
@@dstar01 it's in the works.
@XOIIOXOIIO
@XOIIOXOIIO 2 года назад
Wait are you telling me this guy got 36k subs in one year? How the actual fuck, that kind of growth is ridiculous.
@thadrobinson8343
@thadrobinson8343 Год назад
I wanted to love Molotow. Tried three different markers, they work great the first time, then immediately go to shit. There's still paint in it, it still comes out, but grainy and separated and utterly not like chrome. Just thinking about it pisses me off due to the cost of the things.
@chrisgraunke9269
@chrisgraunke9269 3 года назад
Any updates on this and what you found for durability? I tried this and it sat for weeks, but never fully cured.
@IllusionSector
@IllusionSector 2 года назад
Even if you allow it several months to fully cure, it will all the same be vulnerable to handling. On top of that, (no pun intended) Molotow Liquid Chrome is notoriously difficult to protect with a clear coat because just about anything you spray on it will either visibly dull the shine or obliterate it entirely. Hence why, despite its brilliance, the product remains a no-go for *serious* modelers. (Speaking of whom, they also apparently don't consider spoons as adequate test mules). It is so frustratingly redundant to see video after video conduct the same damn experiment without bothering to learn from the tests that came way before and thus with nothing new to add except more confusion. Lastly, it's important to understand that the way Molotow works is completely different from those other metalics by AKA, Alclad II, Spaz Stix, etc. In fact, you could almost say it's the exact opposite - not only do you hose it down, as opposed to sneaking up with thin layers, but also, because of it's self-leveling nature, you don't really need to undercoat it either. This test, instead of trying different undercoats, which was an needless waste of time, should've focused on topcoats. If you'd care for a... still not quite perfect but heck of a lot more *useful* experiment that came two whole years before this one, here's a link: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bRZgtjekfgU.html (Sorry that it's not in English).
@chrisgraunke9269
@chrisgraunke9269 2 года назад
@@IllusionSector yeah, I'm aware of the basics of this product, which was why I was asking about how well, if at all, the top coat worked for it. It's a shame, because it looks great, it's just not a great product for everyday use.
@MayaCreations95
@MayaCreations95 2 года назад
What sealer did you use for the molotow chrome liquid?
@MegaMoose313
@MegaMoose313 2 месяца назад
I watched a diff video of a guy he was using the market instead of air brushing & he tried a few diff dealers & he liked (Alclad II)
@Shooter_FPV
@Shooter_FPV Месяц назад
Need to spray some chrome, knew Barbatos would have a video on it. So for thinning, what is the ratio paint/thinner? I'll be using the Mr. Leveling Thinner. And this paint ain't cheap...
@barbatosrex9473
@barbatosrex9473 Месяц назад
Check out my updated video on this I posted about a month ago. That said you don't really need to thin it but a few drops of lacquer thinner will do
@samuelvasquez8170
@samuelvasquez8170 2 года назад
Where did you get the dropper bottles
@jimmyjames1807
@jimmyjames1807 2 года назад
try a black base then seal the black, do it in 1 coat, put on heavy, you dont get good results with more than 1 coat
@felipfelop8220
@felipfelop8220 Год назад
The million dollar question is:- who is going come up with a clear coat that doesnt dull metallic paint ?
@richardstiers9010
@richardstiers9010 Год назад
I 100% agree! This is great stuff.....BUT! Now what? What do you do to effectively protect it. I have tried nearly everything, from E7, Pledge, Aquagloss clearcoat....everything kills the shine. If you...breathe on, touch, look sideways at, or even mention it's name disparagingly....it will fog! 🤪 LOTS of good chromes out there, Krylon Foil is one, out of the can....the secret sauce here is....what clearcoat will protect it, and maintain the shine! Now I will step down, off of my box. 🙃
@gregtraut3827
@gregtraut3827 Год назад
How you doing today. I don’t know where I can ask a question?? All try hear. I painted a car with Mcw lacquer Then cleared. By far one of my best. Well I put a mark in it. I thought I’d just buff out. Got the mark out,now fine scratches and hazy fog look. I used novice. Any suggestions I got windows in the car was done
@barbatosrex9473
@barbatosrex9473 Год назад
Every situation is different. Can you mask off the area and just clear that. Then maybe blend it from there
@lg8471
@lg8471 Год назад
I wonder, since you're experimenting,.... because you have that rugh orange peel... the tip may be needed in the equange... Out the tip on and apply it with that.... apply
@b3rn4rddd
@b3rn4rddd 3 года назад
Can you spray candy colors on top to make colored chrome? I have been looking for chrome paints that does not lose its "chrome" when layered with top coat. Most of the chrome paints becomes just grey when layered with candy color or even just a clear top coat.
@barbatosrex9473
@barbatosrex9473 3 года назад
I didn't have a problem spraying candy colors over this or Alclad Chrome. I actually just sprayed chrome over a piece painted red and that looked great. You can see it in my latest picture in my community section of my channel
@b3rn4rddd
@b3rn4rddd 3 года назад
@@barbatosrex9473 Thank you! I hope I can find something similar in my country so I could try this.
@clintanson
@clintanson Год назад
Hi can I use this on Metal? Do I also need a primer first? Thx
@barbatosrex9473
@barbatosrex9473 Год назад
Yes you can use this on metal no problem. A primer helps with durability but it's not needed
@saeedqazi9440
@saeedqazi9440 2 года назад
So why did you get the marker if you just wanted the paint ?
@ZZ430T56
@ZZ430T56 2 года назад
Does not need a base coat and must go on heavy, as you found out.
@Rezparviz
@Rezparviz 2 года назад
Can I send you a small project for me to do and I can pay you ? The job is just to paint a set of Guitar Pickups . Very small area but I can’t find anyone to do the job for me .. Thanks Rez
@barbatosrex9473
@barbatosrex9473 2 года назад
Sure, send me an email. Triggerfish65@gmail.com
@skyrider4789
@skyrider4789 Год назад
Rex, was the durability test ever done? I searched your videos for "molotow" and didn't see one. Was it mentioned in another video w/out Molotow in the title? Thanks
@wowkenshin1
@wowkenshin1 2 года назад
That chrome marker looks like it was dried out.
@mr.hotshot8822
@mr.hotshot8822 3 месяца назад
Is Mirco Gloss great on all chrome paint? Would it keep the same chrome shine after use?
@barbatosrex9473
@barbatosrex9473 3 месяца назад
Most clear coats on top of chrome takes away the chrome look. A recent video I tested AK Interactive 1K Super Gloss and that one seems to do a decent job
@markpr73
@markpr73 11 месяцев назад
My wife bought me a set of pens from a company called Artugn. She got them on Amazon and the set had 6 pens, 3 each chrome and gold. Both colors have 3 different sizes of tip included. So far the chrome pens work and look exactly like the higher priced Molotow product. And, at a cost of approximately $16.00 for 6 pens, they’re a much better deal. I should note that when I used these pens I used them as is and not in an airbrush, so I can’t speak to the viability of that delivery method. That said, I’ve used Molotow pens before and these Artugn pens seem to be a virtual clone. Also note that, while the chrome pens replicate the same ultra reflective finish you get with Molotow pens, the gold pens in this set dried to a matte finish. I’ve no idea if applying the gold with an airbrush would affect the end result.
@barbatosrex9473
@barbatosrex9473 11 месяцев назад
Most gold is like this. One of the toughest finishes to achieve is a chrome gold. The best gold chrome I've tested so far is Inspire Candy Gold and that needs to be airbrushed over a silver or chrome base
@medienmond
@medienmond 3 года назад
there are refill bottles which contain 30ml for about 20€. how much was in that marker (with a 3 or 4 ml content) which cost about 7€. dripstick refill is 250ml for about 9€...
@ernest9868
@ernest9868 2 года назад
this molotow stuff eats right through my Mr.Color lacquer paints. cant use them for accenting
@chuchuchip
@chuchuchip Год назад
I save my old testors paint jars for paint mixing in small batches. Just Goo Gone the labels off or use a plastic scraper & a little paint stripper on a paper towel to clean residue.
@EastwoodFabrication
@EastwoodFabrication 3 года назад
Hey boss, do you have a facebook group page or another way to see your work?
@barbatosrex9473
@barbatosrex9473 3 года назад
Not yet, this is happening at a fast pace. I do post on Instagram. The link to it is in my newer vids
@DaveyGa
@DaveyGa 3 года назад
Tip for your airbrush technique - keep the air ON in between strokes, it'll reduce spatter.
@barbatosrex9473
@barbatosrex9473 3 года назад
I will keep that in mind. I had to change my technique a bit because of the camera. Still getting used to it
@chuchuchip
@chuchuchip 2 года назад
Available in 30ml 'pen refill' tube. I found on Amazon bulk box of glass eye droppers. Washable, can sit in lacquer or paint thinner to dissolve dried paint. I wash in my sonic cleaner, but one is not necessary. Box has lasted many, many years. Rubber bulb has never dried or cracked. I also don't get thinner in the bulb, but wash with soap & water anyway. Box must be at least 20 years old, no exageration.
@BaddaBigBoom
@BaddaBigBoom 2 года назад
The chrome stars inside the front and rear badges on my 2006 subaru have become water damaged and I'm going to use this to refurbish them. Thumbs up btw.
@trouble67551573
@trouble67551573 Год назад
I wonder how a candy would look over that.
@jeffdedrick2312
@jeffdedrick2312 Год назад
Get video, what did you use to clean the airbrush with when you were done shooting the Chrome?
@barbatosrex9473
@barbatosrex9473 Год назад
Alcohol and then acetone
@marcusprince3999
@marcusprince3999 3 года назад
Do you think thinning this stuff with something would make it spray on smoother, yet still look chromey?
@441rider
@441rider 2 года назад
It is alcohol based like Green stuff world chrome it cuts with isopropo alcohol 99%
@a383W
@a383W Год назад
Awesome vid. I keep a collection of your test videos now instead of collecting spoons I paint. Bet this chrome will be great for candy colour base paint
@vociferonheraldofthewinter2284
@vociferonheraldofthewinter2284 2 года назад
I wonder if it was the type of base that gave you trouble. Enamel spray paint has given me hell so many times when I try to layer over it. Sometimes it works fine, other times it's a nightmare. Even when fully cured for a long time.
@kamikaze8645
@kamikaze8645 Год назад
They are alcohol based markers :)
@ThedangdiggityKeough
@ThedangdiggityKeough 3 года назад
@barbatos Rex where did you get that exact airbrush? I need one
@barbatosrex9473
@barbatosrex9473 3 года назад
That's a GSI Procon Boy PS-289 0.3mm , it's my favorite airbrush. I love it, get one here spraygunner.com?aff=10 It will actually make you better at airbrushing
@NeonsStyleHD
@NeonsStyleHD 3 года назад
In a weeks time, can you do a durability test on this please? Also how well does it respond to Clear? What about Liquid Gold? I have a need for this in my current project, but I'd really like to know it's going to work as a long term solution.
@barbatosrex9473
@barbatosrex9473 3 года назад
I will be testing the durability soon. I will put a clear on it too. Plus a new chrome test for Spaz Stix including their special clear coat is coming soon, before the weekend
@eibenjohn1299
@eibenjohn1299 2 года назад
I just air brushed the lightbar from MPC Dodge police car with Molotow chrome. It come out great. I'm fixing it up with lights , and detailing it. And the lightbar had a seem. I striped it with Dettol (disinfectant/cleaner) then sprayed it over the plastic. Great job. Thanks for the video. ,John
@852302
@852302 Год назад
I am convinced that molotow chrome would be the best option for chrome effects, now a doubt, does it accept varnish for protection?
@gat-x105strikegundam5
@gat-x105strikegundam5 3 года назад
FINALLY!!!! I’ve been waiting for this video!!!!!!!!! I have one myself, and it’s one of the most used tools in my painting Arsenal. Have you gotten my email yet? And my the way, to open them, you can pop open the top, rather than doing everything you went through.
@barbatosrex9473
@barbatosrex9473 3 года назад
I was very impressed by your Gundam build. Excellent work. Keep it up. Your skills are great
@gat-x105strikegundam5
@gat-x105strikegundam5 3 года назад
@@barbatosrex9473 Thank you so much! You’re such an inspiration to me, so it means so much to me! I am now working on a candy painting on my rg wing zero gundam, and I’m going a lot of fading and stuff, from the burnt exhaust tutorial you made. Do you have any criticisms on the freedom? I’d love to hear if you did.
@chauffeurmarco
@chauffeurmarco Год назад
Like clearcoat for cars. To get a mirror look instead an orage peel it needs to be applied strongly
@tylernollrc
@tylernollrc 2 года назад
great video, can you use the black gloss base as a finish cote? Or is it strictly base paint. Also, could you give me a link to the airbrush you used in this video?
@geobeard3804
@geobeard3804 3 года назад
You were totally fine in the pink shirt until you called it Muave LOL
@brucecook3297
@brucecook3297 Год назад
waiting for you to do bright gold
@JHartModelworks
@JHartModelworks 3 года назад
Molotow makes a refill bottle. it is about $30 but it's also 30ml. You get more for your money and don't have to jack with dissecting the pen. I don't really like spraying it as it never really seemed to cure for me and came off any time I touched it. I even waited 2 weeks and it still just rubbed right off before I could attach a bumper to a car body. Also clear coating it dulled it down bad for me. But I love using it to brush paint tiny details on things like interior parts that will never get touched.
@barbatosrex9473
@barbatosrex9473 3 года назад
I'm going to test Aqua Gloss over it soon
@robertgraham1511
@robertgraham1511 3 года назад
How did you clean the airbrush?
@barbatosrex9473
@barbatosrex9473 3 года назад
Acetone
@JCWbello
@JCWbello 3 года назад
The problem is when you touch it ‘cause the effect disappear. And when you apply flat/gloss varnish, the chrome gone.
@anthonyvera8524
@anthonyvera8524 4 месяца назад
What pressure did you use? Did you have to thin it at all to spray it?
@barbatosrex9473
@barbatosrex9473 4 месяца назад
I didn't thin it, 18 psi
@mndlessdrwer
@mndlessdrwer 2 года назад
from my understanding, when you're airbrushing something and the wet finish has that really heavy texturing, you should consider thinning it further, though I have a pitiful amount of experience with airbrushing, so it may not change anything either way.
@markferguson3365
@markferguson3365 2 года назад
They actually look a lot like Oneida spoons! The others all look like camping spoons.
@richardbennett8678
@richardbennett8678 2 года назад
Would this be a good base coat for metallics?
@barbatosrex9473
@barbatosrex9473 2 года назад
I would go with Alclad silver base, Wicked Candy O silver base, Stynylrez silver primer or Splash Hyper silver
@PopArow4702
@PopArow4702 11 месяцев назад
Lmao i just tested this today
@NeonsStyleHD
@NeonsStyleHD 3 года назад
When you show things to camera. Can you please put them down, and bring the camera in, rather than bringing them to camera. With you holding them, it's impossible to see the granular nature of the paint as it's moving all the time. Even if you put it full screen, and try to pause it, you just can't get that same look that you would if it was stationary relative to camera.
@barbatosrex9473
@barbatosrex9473 3 года назад
I'll try in the next video. Did you see still shots of each color at the end of my latest video work?? I tried that this time and wanted to know if it worked. Did you see that video? It's the Tamiya cans one. Let me know if that works
@BaddaBigBoom
@BaddaBigBoom 2 года назад
I wonder a) what metal this is made of and 2) if it's electrically conductive after being applied.
@adamspohn6919
@adamspohn6919 3 года назад
I love your vids. I was hoping to find another on the molotow clear coat results? Everything I have tried that I had on hand dulled it. Let me know what you found I would really appreciate it.
@acrowe2512
@acrowe2512 2 года назад
I have found the pens to be excellent for the window trims with car and truck models. Also it does a nice job covering the areas you have to re-chrome when trimming off the areas you had to cut off the chrome sprew. I haven't tried air brushing it but wow, what a demo you've done here Rex. I am about to test the Alclad chrome for the first time but maybe the Molotow is better? I guess I'll soon find out. It does dry. I coat it with a clear coat to help prevent it rubbing off, which it will do with too much handling. Well, from my experience anyways.
@tianskywalker
@tianskywalker 2 года назад
hi may i ask what clear coat you used? Thanks
@acrowe2512
@acrowe2512 2 года назад
@@tianskywalker I just used Pledge Revive it Floor Polish. (Future) It's acrylic and had no adverse effects on the chrome paint. I haven't tried a lacquer clear or enamel yet.
@edsouza6600
@edsouza6600 2 года назад
@@acrowe2512 how long did you wait before putting the pledge on
@acrowe2512
@acrowe2512 2 года назад
@@edsouza6600 I waited at least a full day (24 hours) for the chrome to completely dry. Maybe that's overkill but since I'm in no hurry... that's what I did. Not an expert by any means.
@edsouza6600
@edsouza6600 2 года назад
@@acrowe2512 I've waited a week and applied with a q tip on the grille of a 1/43 scale semi, and it dulled the molotow significantly, with pledge. Is there something else I can try instead of pledge.
@lg8471
@lg8471 Год назад
Would a Clearwater help the rough surface... ??
@barbatosrex9473
@barbatosrex9473 Год назад
Well it did dry super smooth
@mcdonie1975
@mcdonie1975 2 года назад
I would love an update on this, especially if you found out details on clear coats and durability. From my experience nothing worked (that didnt dull the shine) except the Spaz Stix product. And then its was hit or miss even then.
@Mecustoms17
@Mecustoms17 Год назад
I have found the the Vallejo acrylic clear does not smudge the chrome
@8BitJustice
@8BitJustice Год назад
@@Mecustoms17 The regular Model Color clear, the Mecha Color clear, or the Metal Gloss clear, out of curiosity? Or does it not matter? I've heard the Metal Gloss one also works on Alclad, but I haven't tried it myself, so... 🤷‍♂️
@brinx8634
@brinx8634 3 года назад
Pink shirt?? Did you learn nothing from The Simpsons?
@EastwoodFabrication
@EastwoodFabrication 3 года назад
I use this stuff a lot. Painted my T-800 terminator arm with it. Let me know if you would like pictures of it. When I buy this stuff its better to buy it on Amazon because you get a larger quantity for what you pay. If you put a Klear Kote on it, it will fade some. Im waiting for my Aqua and looking forward to testing it. The thing is with this stuff is that it takes a long time to cure. If you dont wait long enough, you can leave indentations like finger prints on your work. also, this stuff doesnt require a black base because of how thick it is, even though it looks watery. I just prime it black. I use 15 on the pressure when using it like the alclad stuff. You just have to spray it "wet", unlike normal paint as well. in your vid you were spraying it like normal paint. You have to spray constantly until it gets wet then avoid overspray BTW I subscribed to your channel. Seems we have a few things in common. Love your vids.
@barbatosrex9473
@barbatosrex9473 3 года назад
Thanks for the feedback and watching.
@ATL514
@ATL514 Год назад
I wonder how it would look if you sprayed a clear coat on top
@barbatosrex9473
@barbatosrex9473 Год назад
Clear coat on top ruined the chrome look. Check out my video on the best clear coat for Alclad Chrome
@beanies113
@beanies113 2 года назад
So does it hold up good at the end? I tried searching your channel but cant seem to find the follow-up video.
@barbatosrex9473
@barbatosrex9473 2 года назад
It fully cures in about a week. Have you seen my latest video on Super Chrome?
@triruns
@triruns 3 года назад
Keep an eye on those dropper bottles. I don't know what the solvents in Alclad are, but they may dissolve the plasticizer in the rubber seals and bulbs, causing them to crumble.
@markeisenmann932
@markeisenmann932 Год назад
Since this is not technically an airbrush paint, can this cause any potential damage to the brush? Or can it clean out like normal? Love the results!
@barbatosrex9473
@barbatosrex9473 Год назад
Will cause no problems at all to the airbrush. Welcome to the channel
@guylotz9072
@guylotz9072 3 года назад
i love molotow and buy the bigger bottles... spray transparent over the molotow
@Jarhead1313
@Jarhead1313 3 года назад
Why not just get Spazstix Mirror Chrome? have great results with it on my Rc bodies. I just bought one of these to use for window trim
@barbatosrex9473
@barbatosrex9473 3 года назад
I have a video on Spaz Stix Mirror Chrome. Check it out on my channel. Great stuff
@frankkleij9149
@frankkleij9149 3 года назад
Are you aware Molotov also produce some other great metallics. I got my first ones just this week the 1 and 2 mms chrome and now I got knowledge just a village further on is a dealer having them all in stock. 5 dislikes? What grumpies are that?
@barbatosrex9473
@barbatosrex9473 3 года назад
Yes, I plan on ordering more Molotow to test for the channel. They have spray cans too I believe. There's many grumpies out there but a thumb up or down, it's all good for the channel. 👍
@edsouza6600
@edsouza6600 2 года назад
What is the suggested cure time for the molotow chrome if airbrushed, and does it need a clear if I intend clean and dust my models regularly.
@edsouza6600
@edsouza6600 2 года назад
Hello
@markeisenmann932
@markeisenmann932 10 месяцев назад
I know it's been a while since this video was made but have you found any successful clear coats to use over the molotow liquid mirror? I tried using some Super Clear III to no avail, any suggestions? Thanks, I love your vids, keep it up!
@barbatosrex9473
@barbatosrex9473 10 месяцев назад
Nothing so far, the best thing was Alclad Aqua Gloss
@tallmanwsor
@tallmanwsor 9 месяцев назад
​@@barbatosrex9473have you tried pledge floor shine?
@tammygeorge1638
@tammygeorge1638 2 года назад
Being a marker to begin with, why is it taking so long to dry?! You would have thought would dry very fast, as same when using it as a marker!! You might have already answered this question, but I'm not going through 219,comments to see what answer you left if it was asked! Lol. 😁👍
@Sandro_tw
@Sandro_tw 2 года назад
the thumbnail...
@renejensen370
@renejensen370 2 года назад
What needle and how many PSI did you use?
@barbatosrex9473
@barbatosrex9473 2 года назад
15 psi
@kjfuerst2838
@kjfuerst2838 3 года назад
Yeah I yelled when you tossed the marker w all the thick residule chrome left inside it. I thin it with rubbing alcohol since it's alcohol based, get about 3-4 times more use that way, even thinner it with hand sanitizer which worked better in marker. It's too thick not thinner wish I'd have known that 11 markers ago.
@barbatosrex9473
@barbatosrex9473 3 года назад
I ended up keeping that maker. Now I'll have to shake some isopropyl in it. As an update, the spoon you see here is now more durable after all this time of curing.
@donaldvaldiviezo9341
@donaldvaldiviezo9341 Год назад
They sell refills
@karlcheng_5210
@karlcheng_5210 11 месяцев назад
how do you clean the brush after spray the chrome? thanks!
@barbatosrex9473
@barbatosrex9473 11 месяцев назад
Same as any other lacquer paint. Just flush it with thinner or Acetone
@karlcheng_5210
@karlcheng_5210 11 месяцев назад
@barbatosrex9473 thanks, and any recommends for the varnish?
@barbatosrex9473
@barbatosrex9473 11 месяцев назад
​@@karlcheng_5210if you're not going to handle the model after it's built then I would go without a Varnish. The Varnish kills the chrome look
@drunowakowski4880
@drunowakowski4880 2 года назад
Best part of the video, when he changes the shirt LOL
Далее
Выбор лака для хрома Molotow
26:20
Просмотров 24 тыс.
Сколько стоит ПП?
00:57
Просмотров 96 тыс.
Обменялись песнями с POLI
00:18
Просмотров 260 тыс.
My Airbrush Won't Spray  -  Let's Fix It!
16:53
Просмотров 39 тыс.
Airbrushing with a Molotow Liquid Chrome Pen Refill
6:58
INSANE Spray Paint and Water Trick
11:15
Просмотров 866 тыс.
Understanding Porsche's New Six Stroke Engine Patent
21:57
Molotow Liquid Chrome Pen | #askHearns
12:32
Просмотров 9 тыс.
Spray Chrome, will this new coating work?
10:58
Просмотров 12 тыс.
5 INSANE Spray Painting Tricks EVERYONE Should Know
26:42