AIRCRAFT | A330 GE CF6 - Fan Blade Removal and Installation

Подписаться 29 тыс.

Просмотров 1,8 млн

50% 1

#Aircraft#Airbus#Maintenance#Fan#Blade
AIRCRAFT | Airbus A330 GE CF6 Engine
Fan Blade Removal and Installation (Maintenance)
How to Remove and Install Fan Blades
हवाई जहाज | Airbus A330 GE CF6 यन्त्र - फैन ब्लेड निकालना और स्थापना (रखरखाव)
Pesawat terbang | Airbus A330 GE CF6 Mesin - Penghapusan dan Pemasangan Blade Kipas
Phi cơ | Airbus A330 GE CF6 Động cơ - Diệt cánh quạt và lắp đặt (Bảo trì)
อากาศยาน | Airbus A330 GE CF6 เครื่องยนต์ - การกำจัดและการติดตั้ง Fan Blade (การบำรุงรักษา)
Kapal terbang | Airbus A330 GE CF6 Enjin - Pembuangan dan Pemasangan Bilah Kipas
বিমান | Airbus A330 GE CF6 ইঞ্জিন - ফ্যান ব্লেড অপসারণ এবং ইনস্টলেশন (রক্ষণাবেক্ষণ)
Aeronaves | Airbus A330 GE CF6 Motor - Remoção e instalação de pás do ventilador (manutenção)
Subscribe to Discover more clips:
ru-vid.com?...

Хобби

Опубликовано:

28 мар 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 192

@Penguin_of_Death 4 года назад

Well that's saved me a trip out...I was about to drop my A330 down to Halfords for a new fan blade

@rt9519 5 лет назад

Thanks, Saved alot of money doing it myself

@tastysnivel 4 года назад

Ricardo Tabanico I decided to do it by myself as well. Luckily this video showed how.

@denerorahming7298 5 лет назад

Thank you...now to send my aircraft mechanic resume out to several airlines.

@SuperStizi 7 лет назад

I just did mine. It worked!

@mariosurin 4 года назад

Wahnsinn es gibt schon Intelligente Menschen auf der Welt wo solche Maschinen erfunden haben .

@CxC2007 10 лет назад

What a beautiful Fan blades.

@computergames5 9 лет назад

Thank you so much, now I can do it with my own Airbus A330.

@rkan2 8 лет назад

+computergames5 Or my personal working GE CF6 engine model. :)

@edsonferreiradelima7061 6 лет назад

TristanLS lá

@leifandersson3762 6 лет назад

TristanLS k .

@afroooodety 6 лет назад

هههههههههههه hahahahaha

@Rogeliodeleon 5 лет назад

😂😂

@jeromedcosta4658 7 лет назад

wow never knew that one blade was changeable in pieces.thanks for that knowledge

@soniyarif4284 8 лет назад

Nice tacknical work

@henry2008kim 5 лет назад

Lovely music and good voice

@johnnoonan5802 7 лет назад

Good Engine the Cf6 they are on Boeing 767s and 747s alot of operators use these on thier entire fleet yes the 330 has the Cf6 as well with 100 inch fan case as its slightly larger than the 767 fan case which is 94 inch something similar to the PW 4000 engine nice video and gives a little of what goes on in hangar maintanance of aircraft engines

@denizgokmen7048 6 лет назад

super..very easy to make jet engine

@nivaldo758 6 лет назад

Very nice instruction.

@ijazsaleem8419 7 лет назад

you are genius people

@m3redgt 7 лет назад

Now i have to get a CF6 Engine to put it in my garden to use this knowledge

@valyardelean 6 лет назад

lol

@amitmathurmathur263 5 лет назад

Very accuracy work.

@PointyTailofSatan 3 года назад

I'm a really big fan of this video.

@yasirmehmood1619 6 лет назад

Very nyc work

@naeemaurangzeb1649 7 лет назад

Fan tastic ! 👏

@ravisub304 5 лет назад

Nice video.......................

@badiskebsisi6541 4 года назад

Nice trick My self I do it differently I will try this Thank you 🇩🇿🇩🇿🇩🇿🇩🇿🇩🇿👍👍👍

@kidsvlogeasyandfun152 6 лет назад

Great mr joe

@nyujun 5 лет назад

I skipped step 3 and forgot about the spacers, but my plane flew Okey.

@vehicletube3323 6 лет назад

informative

@obsamohammedonyoutube3267 3 года назад

Very good job😍😍😍😍

@victimovtalent6036 7 лет назад

good idea to use that fan in my room

@solomonpilot2510 6 лет назад

WOW! NICE CAN U PLZ POST DRUNK PILOTS REMOVAL FROM THE FLIGHT DECK ?

@davidimhoff2118 4 года назад

Geesh I could almost change the fan blade with this guide

@lisapasaribu201 5 лет назад

yang baik untuk yang baik!

@mrrobifishing 5 лет назад

nice bro

@Bappa751 6 лет назад

I like ti👍

@wasimjaan3300 7 лет назад

thank you so much for sharing vedio...Dnt you have other vedios?

@take942 5 лет назад

Sounds like a Mellotron being used in the soundtrack.

@NeutronSplitter 7 лет назад

Mid-span shroud, It'll get you every time.

@kieferlasticman4295 10 лет назад

Thanks just always refer to AMM..

@giancarlomoscetti215 5 лет назад

SO many chance for human error...good Lord!

@bobbypaluga4346 8 лет назад

Love the organ funeral music, are we acknowledging the death of the 330 at the hands of the 777?

@ahsanafzal48 8 лет назад

officially i am an engine managment technician now after watching this video

@VWGTI2013 8 лет назад

That's good. Can u just not work on the plane I get on though..... LOL

@ahsanafzal48 8 лет назад

+VWGTI when is your flight airport and time please

@palangnar3588 5 лет назад

When we think about it, we can tell life of many people traveling by planes everyday is depends on maintance guys.

@common_rail_1 6 лет назад

и всё-таки без молотка никак )))

@clqudy4750 Год назад

I tell ya what, them fan blades sure are espensive! To save some dough I just took one of em ere blades off my commercial field mower, put it in my bench vice, twisted it some, and ground it to proper length My 747 runs OK now, but shakes a bit Probly be fine, and I saved a whole bunch money!

@DG-EditsYT Год назад

Looking to purchase some of these engines for my camper van of eBay never realised a service guide was available on RU-vid, now thankfully I can do it properly and not rely on my dealership cutting corners. Thanks again

@malancavasile5261 8 лет назад

ceva extra cu multumiri

@ernstregelink8749 4 года назад

and now with a complete set fanblades with new platform seals :)

@ecchstore2939 5 лет назад

Can I buy third brand blades from eBay ?

@formatique_arschloch 4 года назад

Does this turbo have variable blades? I'd like to install this to my tdi passat.

@straightpipediesel 8 месяцев назад

It's got 6 sets of them.

@kin0cho 5 лет назад

Thanks for sharing! Amazing how massive the blades are! How much a blade weight?

@sixbox9634 Год назад

I wanna know too ☺️

@user-om1gi6jt8q 5 лет назад

👍

@palashsanfui5378 6 лет назад

@packingten 5 лет назад

This is scary think about this @ 40 thousand feet...Wow..

@wilbertcharles6620 6 лет назад

everything is possible.I will too.

@empatbusi 5 лет назад

Why im watching this? . . . Its available on ebay?

@henry2008kim 5 лет назад

Thank you sir, that will be $3000 plus any parts.

@franknalej6492 6 лет назад

WHAT ABOUT MARK PROTECTION BEFORE SPRAY

@kens3761 6 лет назад

Installation tool available at harbor freight? My GE engines becoming a money pit.

@ilovemywife2685 6 лет назад

If anyone needs there fan blade removed and rebuilt , I am in the know how to do this job. Contact me via PM for low pricing.

@szymekpl709 5 лет назад

ilovemywife2685 sxaaa

@ahmettalha04 4 года назад

yo mate i gotta old 757 of my granpa and the bad boy got some problem with blades. how much would it cost to replace them blades

@adnankaba3372 5 лет назад

How times have changed,

@MegaJohnhammond 6 лет назад

can this operation be performed in flight?

@Gabler21 6 лет назад

Avoid of delay, and lowering maintenance costs, we do always in flight conditions. Little bit cold, and windy, but after a few times, You get use to it. :D

@JF-xq6fr 4 года назад

So that's how they replace one of the three Norelco blades for Chuck Norris's shaver...

@FlumenSanctiViti 7 лет назад

This video doesn't explain how to properly remove bird remains from the motor

@baddonkey6876 4 года назад

Flamethrower....

@dandavis2552 6 лет назад

Strange backing musical track for this procedure????

@tandemwings4733 5 лет назад

Had to pull regularly meself up for thinking I was going to a funeral.

@sutrissutris6497 5 лет назад

Super kapan saya bisa terbang bersama kamu Gratis

@madisonelectronic 8 лет назад

Special blade tool available from factory for under 50,000 USD

@Crazy--Clown 6 лет назад

madisonelectronic *China makes them for $50*

@tbugher62 6 лет назад

Did you miss a few bolts,not a big deal.

@xl000 7 лет назад

Will the procedure work on a A340 ?

@jannavandijjk1930 7 лет назад

xl ,🌵🎐🎐🇬🇷😵. 🤑😂.

@VENOM-ff1li 7 лет назад

Yep...you can apply the same procedure to a fan blade in a car...😂😂

@Gabler21 6 лет назад

Yep - only a problem, no GE CF6 on 340 :P :D

@danfratamico 4 года назад

"Category: Fan Blade Removal Installation" -Alex Trebek

@davesmith1574 7 лет назад

GE engines any good ?

@southjerseysound7340 4 года назад

@soaringtractor you are the most annoying POS ever

@ancharotube7658 6 лет назад

I just wonder why the technican has no gloves?

@user-iy7ni9ty5x 5 лет назад

Economi

@magicwand6746 6 лет назад

As if I will have 2 do one

@trevfar8421 7 лет назад

I changed my fan blade, but there still seems to be a wobble in the engine. I guess I am off to pep boys to get a replacement.

@YungHumble Год назад

This video makes it seem very easy to get these blades out and in. Let me tell you from experience, these blades don't play nice 😂

@shambhusingh2968 7 лет назад

बहुत सुंदर ज्ञान प्राप्त हुआ धन्यवाद 😁😁😁😁🔧🔨🔩✈🚀

@vertigo4298 5 лет назад

Why am I watching this I don't even own an Airbus A330 GE CF6 engine

@ExaltedDuck 4 года назад

huh. That's same way I change blades on my bedroom ceiling fan.

@johnshaft5613 6 лет назад

Ok....I'm sure every wrench turning nerd like me is wondering the same thing....so I'll say it....why on a multi-million dollar jet engine....are they using bolts that are longer than necessary? I love videos like this BTW...thank you!

@williegillie5712 4 года назад

Sometimes they come apart by themselves. The bigger they get the more inertia there is at the tips. At MTO they sound like a buzz saw. Vibration is not a good thing for any engine.

@s910011021 4 года назад

What does the lubricant apply on STG1 fan blade for what?

@SUPERCHARGE7 4 года назад

This lubricant compound / spray is called molykote. It is a high performance Anti-Friction lubricant, can withstand extreme tempreatures and speed. Final result is : less vibration of the N1, results in less vibration in Airframe/Aircraft.

@matt8863 2 года назад

@@SUPERCHARGE7 Yes, and not cheap...About $55 US dollars a can.

@travisk5589 5 лет назад

Where does one get a can of the lube?

@Penguin_of_Death 4 года назад

It looks like Molykote

@salmanfarshy1576 6 лет назад

i would like cell my boeing 777 engine

@surajsuryavanshi7898 4 года назад

Why don't GE giving hand gloves to worker,,, , , you are GE dear bro

@carloshenriquez9612 7 лет назад

I'm lost in RU-vid again ☹️

@rahulbhati5693 5 лет назад

a to z step by step to batau

@peterjones6733 6 лет назад

WHY BACKGROUND MUSIC?

@joeishere500 5 лет назад

Is this video made for the Do-it-yourself guys....??

@A_Man_In_His_Van 5 лет назад

Who is the team that has to write the service manual for these. Holy shit, it must be like a 24 set of encyclopedia Britannica.

@Shreymani2 5 лет назад

i don't want any voice in the middle of music

@stevanusmarcello7204 7 лет назад

GE 90 -115B the most powerfull engine from GENERAL ELECTRIC

@lisapasaribu201 5 лет назад

yang ditokok nya bukan baut atau mur melainkan sivi

@alfredwilliam1184 6 лет назад

A380 airbus will burn 81,890 gallons of kerosene every 24 hours, and they blame the motorist .

@McCracken_9 5 лет назад

How many cars run on kerosene?

@exoticgueslet3389 8 месяцев назад

I like this music. What is it

@drfiberglass 8 лет назад

I wonder how much one of those fan blades cost... Anyone have an idea ??

@skechers620 8 лет назад

FOR 744F CF6-80C 4000USD FOR ONE FAN BLADE.

@terryboyer1342 6 лет назад

Found one on Ebay for a lot less.

@manaljbara6058 6 лет назад

T H؛ سسسسششضضششششششششششضشضضضشضضضضضشششضضضشششضضضضضض١@

@crapper1 8 лет назад

so those blades that spin really freaking fast are basicly held on with a small bolt and squeezed on by a clip basicly!!

@Elrond_Hubbard1 8 лет назад

+ crapper1 Lol..or how about the eight modest-sized bolts that hold the whole engine to the wing. Hell it may be only four , I can't remember, all I know is that I was taken aback when I seen the video.

@Slegzj5 8 лет назад

+crapper1 I don't think so, I think the bolt and nut are there to prevent seperation of the spacer, clip and retainer. Most fanblades have some sort of "teeth" shaped tracks which aligns with aditionally teethshaped tracks on the fan disc. I think those tracks are the structure which holds the blade in place

@miriamn9657 8 лет назад

The blades have a T-shaped end, which fits in the slots of the fandisc. The spacers and other thingies prevent the blade from moving axially ('forward' or 'backward') and press the T-shaped end in its seat, so that it doesn't wiggle (which would be catastrophic at those high rpms). The radial load from the blades is taken by the fandisc directly; it can deal with it. Made of some sort of titanium alloy. Really expensive thing...