Тёмный

Airlift Performance 3H Install Part 4 | Custom Trunk Setup DIY 

HQ_GARAGE
Подписаться 5 тыс.
Просмотров 23 тыс.
50% 1

Thanks for Checking out my Channel, Airlift Performance Install part 4 - Air Suspension install. Building a Custom Trunk setup for air ride DIY. Drop a comment what you think? Thanks for watching.
6” Cylinder T-Bar Clamp
amzn.to/34YvKxW
Pop Riveter
amzn.to/380zNM6
3/8” Tube Bender
amzn.to/2X0fqII
3/8” PTC fitting
amzn.to/3o52ptc
amzn.to/2Jy1cLQ
Tee- Fitting (Compressor T)
amzn.to/3pBDTQI
Teflon Tape
amzn.to/3o86JrI
Aluminum Extrusion
amzn.to/382w0xA
Aluminum Tube - 3/8”
amzn.to/380AYv0
3/8 Air control Valve
amzn.to/3n37n8k
Let me know what you think?
Links to Everything that has helped me build the Channel
--------------------------------------
Camera Gear used -
Sony A6500 - amzn.to/3agKV61
Canon M100 - amzn.to/33KSRK
GoPro Hero 7 - amzn.to/2WF4SiX
Rode VideoMic - amzn.to/39glXCF
Aluminum Tripod - amzn.to/2xm8GeA
JOBY Gorilla Pod - amzn.to/3aiAiQk
DJI Mavic Mini - amzn.to/2OYhBYZ
Tools in the Garage -
Quickjacks Vehicle lift - amzn.to/3cd0RHU
Mr.Heater propane - amzn.to/2xmZQgu
Bosch Cordless 18V Drill/Impact - amzn.to/2Jez8cA
Teflon Sockets for Wheels - amzn.to/33H0n9h
24V Cordless Blower - amzn.to/39j6lyi
Propane Torch - amzn.to/2V2bQvV
OBD II Carly Adapter - amzn.to/3hlV9Gc
Trim Tools - amzn.to/2DcMt5o
Car Car Products I use -
Dual Action Polisher - amzn.to/33JSAHz
Swirl Light - amzn.to/3dwkFH8
Gyeon Rim Sealant 30 ml - amzn.to/2JeadpO
Gyeon Prep 500ml - amzn.to/33Jtmcj
Gyeon GY-5006 Clay 100 g - amzn.to/39gu41W
GYEON Quartz Compound (120ml) - amzn.to/2QINd69
GYEON Q2M Polish (120ml) - amzn.to/33In2SB
GYEON Q2M Bald Wipe Microfiber Towel (16"x16") - amzn.to/2WDGFK1
Gyeon Polish Wipe Microfiber Cloth 16"x16" - amzn.to/2WDGFK1
Nanoskin AS-010 AutoScrub Medium Grade Wash Mitt - amzn.to/2lVap5h
Nanoskin (AS-015) Autoscrub 7" x 7" Handy Towel - amzn.to/2nBhLv6
CarPro Cquartz 50ml Kit - Ceramic Coating Finish - amzn.to/2xNI5ae
CarPro CQuartz UK 3.0_50ml Kit (50ml Kit w/Reload) - amzn.to/2X8aOS2
Sonax 236941 Ceramic Coating CC36 - amzn.to/2R9XsAH
Wolfgang Concours Sealant - amzn.to/3c6lTav
Accessories -
Magnet Phone Mount - amzn.to/32DlBUI
Heat Gun - amzn.to/2y4K2PP
Vinyl Tools - amzn.to/3bmhqjq
Vinyl Plotter - amzn.to/33LlZ44
Order your Vinyl Here -
Blue - amzn.to/2UFRskq
Yellow - amzn.to/2UBGY5k
Bright Yellow - amzn.to/2QHhdiS
Order your Front Splitter rods Here
Splitter Rods - amzn.to/39lEaOZ
Parts Used on my F80
Blue Buttons- amzn.to/2Z5u2bk
Parts Used on my F30
Clear Reflectors - amzn.to/2US3SH6
Corsa Performance Discount Code
www.corsaperfo...
Please Like, Comment and Subscribe, For more Content go and Check out my Instagram and give me a Follow / hq_bmw
#Airlift #M3 #F80

Опубликовано:

 

30 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 128   
@ToddtheLoneDroner
@ToddtheLoneDroner 5 месяцев назад
Pretty sweet dude just ordered.Mine should be here in a few weeks.It's going on in Mercedes c.L little skeptical about putting the tank on the deck lid though
@Isaiah4110.
@Isaiah4110. 6 месяцев назад
Where did you run the EX line to? Ca t make it out going to start pulling my old set up and using your plumping set up way clean and very thought through for emergency lol
@DomiY
@DomiY 3 года назад
You surpassed you’re expectations. The install looks professionally done. Clean and space-saving. Well done brother. 👍🏼
@HQGARAGE
@HQGARAGE 3 года назад
Thanks Dom, I appreciate the kind words 🙏🙏🙏
@TrackFactory
@TrackFactory 3 года назад
Does the t fitting connected to the compressors and running to a single 3/8 line fill the tank up slower?
@HQGARAGE
@HQGARAGE 3 года назад
Not that I have found, I have had it setup both ways and it seems pretty quick to be honest
@TrackFactory
@TrackFactory 3 года назад
@@HQGARAGE Thanks man
@jerrysumler2529
@jerrysumler2529 Год назад
Thank you for the quick response. I also like that you ran the 2 compressors to the 2 fitting into 1 line. How has that been working for you? I see your running the bigger airline I’m running the 1/4 line do you think it would be smart to do it still?
@HQGARAGE
@HQGARAGE Год назад
Ya you could definitely run both compressors into 1 airline it will just take a little longer for the air to flow through because of the smaller passage
@knownaschubbs
@knownaschubbs Год назад
Question did you end up running into any issues with the check valves or popping fuses with the compressors running in parallel like that? Moved my compressors to my spare compartment and instead of having each compressor go into a different port I did something very similar with the t valve but now I end up popping a fuse after I air up and the compressors pop on a second time after the initial start
@HQGARAGE
@HQGARAGE Год назад
Nope I can say I did not have any issue with popping fuses or anything.
@climaco916
@climaco916 3 года назад
So where does the 3/8 Control Valve mount? Do you mount onto the air tank? I'm planning on purchasing the Control Valve soon. Coz I want my air bags to air out at the same like yours. Thank you. I'm glad your video popped up on my you tube. I already hit subscribe.
@HQGARAGE
@HQGARAGE 3 года назад
The control valve goes on each rear airline so it controls the air going in and out of the rear bags so it airs out level.
@Incognito_809
@Incognito_809 3 года назад
@@HQGARAGE so to be correct i need to buy 2 valves. 1 for each line in the rear?
@HQGARAGE
@HQGARAGE 3 года назад
Yup that is correct
@DruMarr
@DruMarr Год назад
You didn’t show connecting the power in confused, do you have a battery in the trunk?
@HQGARAGE
@HQGARAGE Год назад
Yes that is correct. The BMW has a battery in the trunk
@simplyblazeegaming
@simplyblazeegaming 2 года назад
is it true that hardline are not reliable? I am thinking of floating my tank i have a hatchback so if I mount it to my rear back seats i wont be able to put them down. what do suggest?
@HQGARAGE
@HQGARAGE 2 года назад
Hardliners are reliable when installed correctly. I think a hatchback is tough. Most guys put it under the floor or just behind the seat attached to the floor
@letsgo2328
@letsgo2328 2 года назад
Another way to level the dump without any additional hardware would be to have the EQUAL LENGHT of lines all around. Just have the rears rolled upped in a large circle or even cross sides and tucked away. That's all. What I feel AIR RIDE Perf should do with the manifold. Is have a mixxed mani. 3/8" port (2ea) & 1/4"(2ea). Depending where you set up is the shorter side would have the smaller hoses for dumping. I hope I made sense. ....ps Watched your entire set up and love your work. Quality stuff!!🧤🤍🖤
@HQGARAGE
@HQGARAGE 2 года назад
I agree with the equal length lines, I think that would also be more reliable and 1 less location for leaks. I think that would be smart of Airlift to do with the manifold. Thank you 🙏 I appreciate the kind words.
@samarhmin3747
@samarhmin3747 Год назад
Just emailed you guys for a quote to installed for a 2021 accord sport
@HQGARAGE
@HQGARAGE Год назад
I am not a shop to do custom installs. I only work on my own stuff. Sorry bro
@hangingwithcoupe6844
@hangingwithcoupe6844 Год назад
Is there any special line prep to the ends of the hardline before running them into the PTC fittings? I am running the nickel/copper line.
@HQGARAGE
@HQGARAGE Год назад
Just make sure they are de-burred and clean from any grease or contamination
@F80Ho
@F80Ho 3 года назад
If I ever get bags, I’m coming to you for install 😅🙌. Awesome work man, looks great!
@HQGARAGE
@HQGARAGE 3 года назад
How bout if you ever get bags, I’ll come down to you and help you install them where it’s much warmer 😉😉
@the405show
@the405show 2 месяца назад
I respect the hard work geeat video
@HQGARAGE
@HQGARAGE 2 месяца назад
Cheers 🍻 Thanks man
@brianpreston2911
@brianpreston2911 Год назад
Sweet setup. Wanna bag my 14 gt mustang but don't know the tire size and rim size that will fit.
@HQGARAGE
@HQGARAGE Год назад
That is definitely one of the most challenging parts. Thankfully I worked with Vossen and they helped me with my specs. Most wheel manufacturers know what will work or you can also go to Fitment industries and look at other rides like yours and see what their specs are.
@brianpreston2911
@brianpreston2911 Год назад
Thank you sir.
@kalanikeone3386
@kalanikeone3386 14 дней назад
I just watched your video and had some questions? I wondered where did you put the control valve??? To make the rear drop at the same speed at the front. Your video helped a lot
@HQGARAGE
@HQGARAGE 14 дней назад
The valves were put on the lines going to the rear bags.
@kalanikeone3386
@kalanikeone3386 13 дней назад
@@HQGARAGE so I am running 3/8 line system to the 1/4 line off of the struts and bags. And the reason for this is I want the lift and lower to be faster. Now at first I was thinking that I was supposed to put the flow valve to the rear bags so that the fronts would drop at the same speed as the rear. I thought to restrict the flow in the rear will make the whole car drop at the same time. But you put them on the front lines and now I’m confused. Could you please give an explanation so that it makes sense to me??? I’m just learning and want to know more that’s why all the questions
@HQGARAGE
@HQGARAGE 13 дней назад
I appologize, I confused myself. The valves went on the rear lines because those lines were so much shorter than the front lines. Which slowed the air coming out and going in so it would air up and down at the same speed as the front
@kalanikeone3386
@kalanikeone3386 13 дней назад
@@HQGARAGE thank you so much. You don’t know how much this is helping me. Appreciate everything
@Br_chin
@Br_chin 2 года назад
Old videos but these are going to help me when I install my airlift kit Super informative Thanks 👍
@HQGARAGE
@HQGARAGE 2 года назад
Glad I could help you out still, the main reason for making these videos. 👍🏻👍🏻
@FadeToBlackLLC
@FadeToBlackLLC Год назад
Awesome setup. I"m just getting into Air and this is a really nice install. I know I'm late but had to comment.
@HQGARAGE
@HQGARAGE Год назад
Cheers 🍻
@kuyapol
@kuyapol 2 года назад
Do you have second harness for the second compressor?
@HQGARAGE
@HQGARAGE 2 года назад
I did but no longer have it anymore
@anthonyblancett8449
@anthonyblancett8449 7 месяцев назад
The setup looks good! I think im going to try and do something similar on my car, but I was hoping you could give me a bit of clarification regarding the clamps you used. I see in the video description that you have an amazon link to 6" clamps, i was curious are those 6" in diameter, or is the clamp itself 6" around? Its a dumb question I know haha, but I just want to be sure the clamp is sufficient enough to use so I dont have to deal with returning them 😅 thanks in advance for your help!
@TowProVlogs
@TowProVlogs Год назад
So you have to run a seperate line for each bag?
@HQGARAGE
@HQGARAGE Год назад
With airlift yes that is correct
@SuperGobal
@SuperGobal 9 месяцев назад
What size are the t bar clamps ?
@HQGARAGE
@HQGARAGE 9 месяцев назад
I cannot remember now but I will see if I can find my original order
@hulksmash_18ss
@hulksmash_18ss 2 года назад
Air control valve? Where do I get those?
@HQGARAGE
@HQGARAGE 2 года назад
You can get them here amzn.to/3Usuk6O
@rafagas5150
@rafagas5150 Год назад
Does the bottom cover make contact with the compressors? If so. Doesn’t the compressor get really hot? Im installing my airlift but I’m very limited to trunk space. I want to do similar set up with hiding them down there but the compressors are a tab taller
@Incognito_809
@Incognito_809 3 года назад
Thank you sir!!
@HQGARAGE
@HQGARAGE 3 года назад
You are very welcome 🙏
@jesusyedra4521
@jesusyedra4521 3 года назад
By the way I love the setup nicely done ✔
@nonameisthename138
@nonameisthename138 3 года назад
That was some great work 👏 👏👏👍I'm leaning towards an air setup🤔
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏 I appreciate that. You would definitely not regret it.
@alextswb3492
@alextswb3492 7 месяцев назад
Set up is so clean! You mind telling me me what size t-bolt clamps those are?
@1st_perrybros875
@1st_perrybros875 3 года назад
Fire set up dude
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏 I appreciate that
@tesla_3_performance
@tesla_3_performance 3 года назад
Love the trunk layout and the use of the hardline feeders 👍 ordered my kit for my widebody challenger last week 😬
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏 I appreciate that. That is going to be so sick 🔥🔥🔥🔥
@stateboy80892
@stateboy80892 2 года назад
😍👍
@glenfishing
@glenfishing 3 года назад
That’s clean man. Good job
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏 I appreciate that.
@ericmartell816
@ericmartell816 9 месяцев назад
Appreciate your well documented write up. Will definitely take some of your ideas to put towards my project. Keep up the good work!
@HQGARAGE
@HQGARAGE 9 месяцев назад
Cheers 🍻 Thank you
@heavymetalairsoft6188
@heavymetalairsoft6188 3 года назад
I am installing a 3p on my Mustang. I like the way you set yours up. Can I get all those extra fittings from Airlift performance?
@HQGARAGE
@HQGARAGE 3 года назад
Most of them I believe so, i believe you can also get them from eBay, Amazon, or even like bag riders.
@huskyjay4405
@huskyjay4405 3 года назад
Super clean set up
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏
@cali9514
@cali9514 3 года назад
That "T" fitting you hooked up from your compressors, how is that working out for you and where can I find those?
@HQGARAGE
@HQGARAGE 3 года назад
That ‘T’ fitting is working brilliant and still fills the tank quite fast. You can get the T here amzn.to/3iCFovV Or at your local race shop or place that sells airline fittings for big rigs.
@rha987654321
@rha987654321 2 года назад
Hey quick question did you use the second compressor harness or did you run them both into the first harness together?
@HQGARAGE
@HQGARAGE 2 года назад
I have always used a second compressor harness. Mostly for a fail safe so I always knew at least 1 compressor would work.
@tadis2020
@tadis2020 3 года назад
Following Airlift installation instruction, you shouldnt mount managment this way..?
@HQGARAGE
@HQGARAGE 3 года назад
Ideally they recommend it laying flat but having it mounted with the airlines pointed down is acceptable. You cannot have it mounted with the connector and airlines pointed up. If you go to page 10 fig.12 of the instruction manual it gives you a diagram of the mounting of the manifold.
@G_Weezy
@G_Weezy 3 года назад
Been awhile my friend. Thanks for all the updates. I do learn from your videos. Like I mentioned before it was your videos that I was able to put mines together. I’m needing to add air control valves soon to adjust the raise and drop to even out. Which directions did you install the air control valves? Or does it matter? Do they face towards the bags or manifold?
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏 I appreciate the feedback and am glad you attempted it yourself. Looking forward to hear how the air control valves worked out for you.
@hipijs1337
@hipijs1337 3 года назад
Thank you! Definitely the best video I've seen on RU-vid about air suspension setup. Learned many new things and didn't have to listen about the weather, dogs, car problems, ongoing projects etc, only the useful info!
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 😊 I appreciate the feedback.
@jayrolla_xse4238
@jayrolla_xse4238 2 года назад
this is awesome.. i rushed my install haha instantly regretting it seeing this
@HQGARAGE
@HQGARAGE 2 года назад
I rushed my first install as well and learned my lesson. 2nd round was definitely night and day better
@richardflores8771
@richardflores8771 2 года назад
Awesome job Bro! 1 question, where can I get or find or would you be in the business of making and selling aluminum base plates like urs for the the 3P manifold?
@HQGARAGE
@HQGARAGE 2 года назад
If you would like one send me a DM on Instagram or email jd10884@gmail.com and I will get you one.
@JesusSanchez-cp9ut
@JesusSanchez-cp9ut 2 года назад
@@HQGARAGE I sent you a DM
@rha987654321
@rha987654321 2 года назад
You basically helped me understand this thing better than anyone else as well
@HQGARAGE
@HQGARAGE 2 года назад
That is all I could ask for and the main reason for actually starting this RU-vid channel.
@MrTriktom
@MrTriktom 3 года назад
Very clean setup ! 👍Why you are using hardlines instead for plastic lines which comes with airlift kit? Is it only for the clean look or it is some other reasons? I'm also wondering who is selling that fitting with pressure regulating for the back? I need theese also 😊
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏 I appreciate that, the hardliners are just for show no other purpose at all. The pressure regulators I got from here. amzn.to/2Qvw82u hope that helps.
@MrTriktom
@MrTriktom 3 года назад
@@HQGARAGE oh yes, link helps very much 🙂 By the way, how it's going with your airlift managment? After you finished instal and calibrating, had you any isues untinl now? 🙂
@HQGARAGE
@HQGARAGE 3 года назад
I haven’t had any issues and everything is working incredible and it’s amazing. Not gonna lie being my second car on air and it’s still my fav mod hands down
@SoleDreamzAndLexoticj
@SoleDreamzAndLexoticj 2 года назад
this was an awesome build, much respect
@HQGARAGE
@HQGARAGE 2 года назад
Thank you 🙏 I truly appreciate that
@jesusyedra4521
@jesusyedra4521 3 года назад
Hey buddy quick question I have the air compressor where my spare tire goes out will it heat up and mess up when it turns on while it's covered underneath?
@jesusyedra4521
@jesusyedra4521 3 года назад
So did u read the question ?
@HQGARAGE
@HQGARAGE 3 года назад
Hey 👋 no I don’t think you will have to worry about it getting too hot and messing up. They get warm but as long as you aren’t airing out and airing up over and over again where the compressor doesn’t stop running you will be totally fine
@jesusyedra4521
@jesusyedra4521 3 года назад
@@HQGARAGE awesome thank u so much I appreciate it God bless have a good day
@hotgearboi
@hotgearboi 3 года назад
where did you get the quick dump?
@HQGARAGE
@HQGARAGE 3 года назад
That came with the airlift performance kit
@SuperJmoney87
@SuperJmoney87 Год назад
Hell of a job 👍🏽
@HQGARAGE
@HQGARAGE Год назад
Thank you 🙏
@tidehunter12
@tidehunter12 Год назад
Ohman, what a job well done. Nice work bro! I’m impress with your work❤
@HQGARAGE
@HQGARAGE Год назад
Thank you 🙏 I put a lot of thought and dedication to this install
@tidehunter12
@tidehunter12 Год назад
@@HQGARAGEdo you have the link for the “quick dump valve?”
@HQGARAGE
@HQGARAGE Год назад
Yup 👍🏻 here you go amzn.to/3yGUkle
@tidehunter12
@tidehunter12 Год назад
@@HQGARAGE how did you connect it, to the T ?
@HQGARAGE
@HQGARAGE Год назад
With the lines that come off the compressors and a PTC fitting for the Airline to the manifold
@joequesada2239
@joequesada2239 3 года назад
Good job man
@HQGARAGE
@HQGARAGE 3 года назад
Thanks Man 🙏🙏
@jokermajestic
@jokermajestic 3 года назад
Hey love the set up, my question is what is the fitting that you used that converts the hard line to the soft line I can’t seem to find it thank you for the video learned alot
@HQGARAGE
@HQGARAGE 3 года назад
Hey Chris, thanks for the comments. I actually took the brass fittings off since they leaked and replaced them with these ones. amzn.to/3v6Ggyf
@lilcamber
@lilcamber 2 года назад
@@HQGARAGE hello! have those new fittings leaked at all since?
@HQGARAGE
@HQGARAGE 2 года назад
Nope I have not had any issues since.
@lilcamber
@lilcamber 2 года назад
@@HQGARAGE awesome, thanks a lot!
@beastmode114
@beastmode114 2 года назад
With those fittings you just push the tube/soft line into it and it’ll grip it? Do I need to use Teflon at all with these connectors?
@tylerisgray
@tylerisgray 3 года назад
Love this video, I'm going to be doing a similar tank mounting on my Q50 I appreciate you leaving the links in the description. I can't wait to get into this, this will be my first time going on air.
@HQGARAGE
@HQGARAGE 3 года назад
Congrats on going air, you are going to love it. Just take your time on installing it and you will have little to no issues.
@tylerisgray
@tylerisgray 3 года назад
@@HQGARAGE Super excited. Going with the 3H kit. I'm an OCD maniac so this project seems right up my alley 😂
@tylerisgray
@tylerisgray 3 года назад
@@HQGARAGE what brass unions are those that you used to join to hard line and flex line?
@HQGARAGE
@HQGARAGE 3 года назад
amzn.to/3v6Ggyf
@HQGARAGE
@HQGARAGE 3 года назад
Use those ones I actually changed out the brass ones for these as I found the brass ones leaked.
Далее
Airlift Suspension airing out level | How to
4:47
Просмотров 18 тыс.
Ответы Мэил Ру
01:00
Просмотров 1,3 млн
Teeth gadget every dentist should have 😬
00:20
Просмотров 880 тыс.
11 ming dollarlik uzum
00:43
Просмотров 1,1 млн
Airlift Performance Bags
12:03
Просмотров 21 тыс.
TRUNK SETUP IS DONE!!! (Mind blowing)
14:23
Просмотров 42 тыс.
Best Trunk Setup! Clean and simple! DIY g35, g37
21:43
Air ride suspension, Air Management setup
10:00
Просмотров 29 тыс.
Tips for doing hardline trunk setups.  Intro
7:49
Просмотров 17 тыс.
DIY trunk setup under $150| airlift| 2022 Mustang
13:08
PART ONE: AIRLIFT PERFORMANCE INSTALL MK7.5 GOLF R
16:44
Airlift Performance Bags Install
28:16
Просмотров 108 тыс.
Ответы Мэил Ру
01:00
Просмотров 1,3 млн